aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple
diff options
context:
space:
mode:
Diffstat (limited to 'libmaple')
-rw-r--r--libmaple/adc.h1
-rw-r--r--libmaple/bkp.h6
-rw-r--r--libmaple/dma.h4
-rw-r--r--libmaple/ring_buffer.h6
-rw-r--r--libmaple/timer.h9
5 files changed, 16 insertions, 10 deletions
diff --git a/libmaple/adc.h b/libmaple/adc.h
index 520b982..c6a67a0 100644
--- a/libmaple/adc.h
+++ b/libmaple/adc.h
@@ -309,6 +309,7 @@ uint16 adc_read(const adc_dev *dev, uint8 channel);
* Defines the total number of conversions in the regular channel
* conversion sequence.
*
+ * @param dev ADC device.
* @param length Regular channel sequence length, from 1 to 16.
*/
static inline void adc_set_reg_seqlen(const adc_dev *dev, uint8 length) {
diff --git a/libmaple/bkp.h b/libmaple/bkp.h
index cea39b6..97edd2a 100644
--- a/libmaple/bkp.h
+++ b/libmaple/bkp.h
@@ -46,7 +46,7 @@ extern "C" {
/** Backup peripheral register map type. */
typedef struct bkp_reg_map {
- const uint32 RESERVED1;
+ const uint32 RESERVED1; ///< Reserved
__io uint32 DR1; ///< Data register 1
__io uint32 DR2; ///< Data register 2
__io uint32 DR3; ///< Data register 3
@@ -61,8 +61,8 @@ typedef struct bkp_reg_map {
__io uint32 CR; ///< Control register
__io uint32 CSR; ///< Control and status register
#ifdef STM32_HIGH_DENSITY
- const uint32 RESERVED2;
- const uint32 RESERVED3;
+ const uint32 RESERVED2; ///< Reserved
+ const uint32 RESERVED3; ///< Reserved
__io uint32 DR11; ///< Data register 11
__io uint32 DR12; ///< Data register 12
__io uint32 DR13; ///< Data register 13
diff --git a/libmaple/dma.h b/libmaple/dma.h
index c763672..7c380d0 100644
--- a/libmaple/dma.h
+++ b/libmaple/dma.h
@@ -417,6 +417,8 @@ static inline uint8 dma_is_channel_enabled(dma_dev *dev, dma_channel channel) {
* If you're attempting to figure out why a DMA interrupt fired; you
* may find dma_get_irq_cause() more convenient.
*
+ * @param dev DMA device
+ * @param channel Channel whose ISR bits to return.
* @see dma_get_irq_cause().
*/
static inline uint8 dma_get_isr_bits(dma_dev *dev, dma_channel channel) {
@@ -430,6 +432,8 @@ static inline uint8 dma_get_isr_bits(dma_dev *dev, dma_channel channel) {
* If you're attempting to clean up after yourself in a DMA interrupt,
* you may find dma_get_irq_cause() more convenient.
*
+ * @param dev DMA device
+ * @param channel Channel whose ISR bits to clear.
* @see dma_get_irq_cause()
*/
static inline void dma_clear_isr_bits(dma_dev *dev, dma_channel channel) {
diff --git a/libmaple/ring_buffer.h b/libmaple/ring_buffer.h
index 101f010..ad6ad96 100644
--- a/libmaple/ring_buffer.h
+++ b/libmaple/ring_buffer.h
@@ -89,7 +89,7 @@ static inline uint16 rb_full_count(ring_buffer *rb) {
/**
* @brief Returns true if and only if the ring buffer is full.
- * @brief rb Buffer to test.
+ * @param rb Buffer to test.
*/
static inline int rb_is_full(ring_buffer *rb) {
return (rb->tail + 1 == rb->head) ||
@@ -139,8 +139,8 @@ static inline int16 rb_safe_remove(ring_buffer *rb) {
/**
* @brief Attempt to insert an element into a ring buffer.
*
- * @brief rb Buffer to insert into.
- * @brief element Value to insert into rb.
+ * @param rb Buffer to insert into.
+ * @param element Value to insert into rb.
* @sideeffect If rb is not full, appends element onto buffer.
* @return If element was appended, then true; otherwise, false. */
static inline int rb_safe_insert(ring_buffer *rb, uint8 element) {
diff --git a/libmaple/timer.h b/libmaple/timer.h
index fa19cc9..befc026 100644
--- a/libmaple/timer.h
+++ b/libmaple/timer.h
@@ -628,8 +628,8 @@ static inline uint16 timer_get_count(timer_dev *dev) {
/**
* @brief Sets the counter value for the given timer.
- * @param timer_num Timer whose counter to set
- * @param value New counter value
+ * @param dev Timer whose counter to set
+ * @param value New counter value
*/
static inline void timer_set_count(timer_dev *dev, uint16 value) {
(dev->regs).bas->CNT = value;
@@ -804,8 +804,8 @@ static inline void timer_cc_disable(timer_dev *dev, uint8 channel) {
/**
* @brief Get a channel's capture/compare output polarity
- * @brief dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
- * @brief channel Channel whose capture/compare output polarity to get.
+ * @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
+ * @param channel Channel whose capture/compare output polarity to get.
* @return Polarity, either 0 or 1.
* @see timer_cc_set_polarity()
*/
@@ -982,6 +982,7 @@ typedef enum timer_oc_mode_flags {
*
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel to configure in output compare mode.
+ * @param mode Timer mode to set.
* @param flags OR of timer_oc_mode_flags.
* @see timer_oc_mode
* @see timer_oc_mode_flags