diff options
Diffstat (limited to 'libmaple')
| -rw-r--r-- | libmaple/delay.h | 2 | ||||
| -rw-r--r-- | libmaple/i2c.c | 8 | ||||
| -rw-r--r-- | libmaple/nvic.c | 2 | ||||
| -rw-r--r-- | libmaple/util.c | 2 |
4 files changed, 7 insertions, 7 deletions
diff --git a/libmaple/delay.h b/libmaple/delay.h index dd68ec6..6f8b8ba 100644 --- a/libmaple/delay.h +++ b/libmaple/delay.h @@ -15,7 +15,7 @@ * @param us Number of microseconds to delay. */ static inline void delay_us(uint32 us) { - us *= DELAY_US_MULT; + us *= STM32_DELAY_US_MULT; /* fudge for function call overhead */ us--; diff --git a/libmaple/i2c.c b/libmaple/i2c.c index 8f6967b..e3f3199 100644 --- a/libmaple/i2c.c +++ b/libmaple/i2c.c @@ -393,7 +393,7 @@ void i2c_init(i2c_dev *dev) { * I2C_REMAP: Remap I2C1 to SCL/PB8 SDA/PB9. */ void i2c_master_enable(i2c_dev *dev, uint32 flags) { -#define I2C_CLK (PCLK1/1000000) +#define I2C_CLK (STM32_PCLK1/1000000) uint32 ccr = 0; uint32 trise = 0; @@ -425,16 +425,16 @@ void i2c_master_enable(i2c_dev *dev, uint32 flags) { if (flags & I2C_DUTY_16_9) { /* Tlow/Thigh = 16/9 */ ccr |= I2C_CCR_DUTY; - ccr |= PCLK1/(400000 * 25); + ccr |= STM32_PCLK1/(400000 * 25); } else { /* Tlow/Thigh = 2 */ - ccr |= PCLK1/(400000 * 3); + ccr |= STM32_PCLK1/(400000 * 3); } trise = (300 * (I2C_CLK)/1000) + 1; } else { /* Tlow/Thigh = 1 */ - ccr = PCLK1/(100000 * 2); + ccr = STM32_PCLK1/(100000 * 2); trise = I2C_CLK + 1; } diff --git a/libmaple/nvic.c b/libmaple/nvic.c index eed9af8..bbbf13f 100644 --- a/libmaple/nvic.c +++ b/libmaple/nvic.c @@ -68,7 +68,7 @@ void nvic_init(uint32 vector_table_address, uint32 offset) { * Lower priority level for all peripheral interrupts to lowest * possible. */ - for (i = 0; i < NR_INTERRUPTS; i++) { + for (i = 0; i < STM32_NR_INTERRUPTS; i++) { nvic_irq_set_priority((nvic_irq_num)i, 0xF); } diff --git a/libmaple/util.c b/libmaple/util.c index f91b0df..bb56a62 100644 --- a/libmaple/util.c +++ b/libmaple/util.c @@ -39,7 +39,7 @@ /* Failed ASSERT()s send out a message using this USART config. */ #ifndef ERROR_USART #define ERROR_USART USART2 -#define ERROR_USART_CLK_SPEED PCLK1 +#define ERROR_USART_CLK_SPEED STM32_PCLK1 #define ERROR_USART_BAUD 9600 #define ERROR_TX_PORT GPIOA #define ERROR_TX_PIN 2 |