aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/usb/usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'libmaple/usb/usb.c')
-rw-r--r--libmaple/usb/usb.c102
1 files changed, 53 insertions, 49 deletions
diff --git a/libmaple/usb/usb.c b/libmaple/usb/usb.c
index 8dbf9c9..6c010d9 100644
--- a/libmaple/usb/usb.c
+++ b/libmaple/usb/usb.c
@@ -225,10 +225,11 @@ RESULT usbPowerOff(void) {
return USB_SUCCESS;
}
+
+// These two functions (usbEnbISR/usbDsbISR) are implementented in ST style,
+// and at least the DsbISR doesn't seem to work?
void usbEnbISR(void) {
NVIC_InitTypeDef NVIC_InitStructure;
-
-
NVIC_InitStructure.NVIC_IRQChannel = USB_LP_IRQ;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
@@ -339,64 +340,62 @@ void usbWaitReset(void) {
systemHardReset();
}
-
-/* todo, change this function to behave like below */
-/* copies data out of sendBuf into the packet memory for
- usb, but waits until any previous usb transmissions have
- completed before doing this. It returns without waiting
- for its data to be sent. most efficient when 64 bytes are copied
- at a time. users responsible for not overflowing sendbuf
- with len! if > 64 bytes are being sent, then the function
- will simply send the first 64 and return. It is the USERS JOB
- to implement any blocking. return -1 implies connection failure,
- return 0 implies buffer filled, return < len implies another
- transaction is needed to complete the send.
-*/
-
-/* current behavior:
- sendBytes will block until bytes are actually sent over the pipe.
- broken pipes could stall this function. DTR and RTS are used to check
- for a valid connection.
- */
-int16 usbSendBytes(uint8* sendBuf, uint16 len) {
+/* This low-level send bytes function is NON-BLOCKING; blocking behavior, with
+ * a timeout, is implemented in usercode (or in the Wirish C++ high level
+ * implementation).
+ *
+ * This function will quickly copy up to 64 bytes of data (out of an
+ * arbitrarily large buffer) into the USB peripheral TX buffer and return the
+ * number placed in that buffer. It is up to usercode to divide larger packets
+ * into 64-byte chunks to guarantee delivery. Use usbGetCountTx() to determine
+ * whether the bytes were ACTUALLY recieved by the host or just transfered to
+ * the buffer.
+ *
+ * The function will return -1 if it doesn't think that the USB host is
+ * "connected", but it can't detect this state robustly. "Connected" in this
+ * context means that an actual program on the Host operating system is
+ * connected to the virtual COM/ttyACM device and is recieving the bytes; the
+ * Host operating system is almost always configured and keeping this endpoint
+ * alive, but the bytes never get read out of the endpoint buffer.
+ *
+ * The behavior of this function is subtle and frustrating; it has gone through
+ * many simpler and cleaner implementation that frustratingly don't work cross
+ * platform.
+ *
+ * */
+uint16 usbSendBytes(uint8* sendBuf, uint16 len) {
+
+ uint16 loaded = 0;
if (bDeviceState != CONFIGURED || (!usbGetDTR() && !usbGetRTS())) {
- return -1; /* indicates to caller to stop trying, were not connected */
+ // Indicates to caller to stop trying, were not configured/connected
+ // The DTR and RTS lines are handled differently on major platforms, so
+ // the above logic is unreliable
+ return 0;
}
- /*
- if (countTx >= VCOM_TX_EPSIZE) {
- return 0; // indicates to caller that the buffer is full
+ // Due to a variety of shit this is how we roll; all buffering etc is pushed
+ // upstream
+ if (countTx) {
+ return 0;
}
- */
- while (countTx)
- ;
-
- uint16 sent = len;
-
- while (len > VCOM_TX_EPSIZE) {
- countTx = VCOM_TX_EPSIZE;
-
- UserToPMABufferCopy(sendBuf,VCOM_TX_ADDR,VCOM_TX_EPSIZE);
- _SetEPTxCount(VCOM_TX_ENDP, VCOM_TX_EPSIZE);
- _SetEPTxValid(VCOM_TX_ENDP);
-
- while (countTx)
- ;
-
- len -= VCOM_TX_EPSIZE;
- sendBuf += VCOM_TX_EPSIZE;
+ // We can only put VCOM_TX_EPSIZE bytes in the buffer
+ if(len > VCOM_TX_EPSIZE) {
+ loaded = VCOM_TX_EPSIZE;
+ } else {
+ loaded = len;
}
- if (len != 0) {
- countTx = len;
- UserToPMABufferCopy(sendBuf,VCOM_TX_ADDR,len);
- _SetEPTxCount(VCOM_TX_ENDP,len);
+ // Try to load some bytes if we can
+ if (loaded) {
+ UserToPMABufferCopy(sendBuf,VCOM_TX_ADDR + countTx, loaded);
+ _SetEPTxCount(VCOM_TX_ENDP, countTx+loaded);
_SetEPTxValid(VCOM_TX_ENDP);
+ countTx += loaded;
}
- return sent;
+ return loaded;
}
/* returns the number of available bytes are in the recv FIFO */
@@ -453,3 +452,8 @@ uint8 usbGetDTR() {
uint8 usbGetRTS() {
return ((line_dtr_rts & CONTROL_LINE_RTS) != 0);
}
+
+uint16 usbGetPending() {
+ return countTx;
+}
+