aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/usb/stm32f1/usb_cdcacm.c
diff options
context:
space:
mode:
Diffstat (limited to 'libmaple/usb/stm32f1/usb_cdcacm.c')
-rw-r--r--libmaple/usb/stm32f1/usb_cdcacm.c65
1 files changed, 38 insertions, 27 deletions
diff --git a/libmaple/usb/stm32f1/usb_cdcacm.c b/libmaple/usb/stm32f1/usb_cdcacm.c
index 6998a25..44b2239 100644
--- a/libmaple/usb/stm32f1/usb_cdcacm.c
+++ b/libmaple/usb/stm32f1/usb_cdcacm.c
@@ -284,14 +284,14 @@ USB_Line_Coding line_coding = {
.paritytype = 0x00,
.datatype = 0x08
};
-uint8 vcomBufferRx[USB_CDCACM_RX_BUFLEN];
-volatile uint32 countTx = 0;
-volatile uint32 recvBufIn = 0;
-volatile uint32 recvBufOut = 0;
-volatile uint32 maxNewBytes = USB_CDCACM_RX_BUFLEN;
-volatile uint32 newBytes = 0;
RESET_STATE reset_state = DTR_UNSET;
-uint8 line_dtr_rts = 0;
+
+static volatile uint8 vcomBufferRx[USB_CDCACM_RX_BUFLEN];
+static volatile uint32 rx_offset = 0;
+static volatile uint32 countTx = 0;
+static volatile uint32 newBytes = 0;
+
+static volatile uint8 line_dtr_rts = 0;
/*
* Endpoint callbacks
@@ -438,7 +438,28 @@ uint16 usb_cdcacm_get_pending() {
* Copies up to len bytes from our private data buffer (*NOT* the PMA)
* into buf and deq's the FIFO. */
uint32 usb_cdcacm_rx(uint8* buf, uint32 len) {
- static int offset = 0;
+ /* Copy bytes to buffer. */
+ uint32 n_copied = usb_cdcacm_peek(buf, len);
+
+ /* Mark bytes as read. */
+ newBytes -= n_copied;
+ rx_offset += n_copied;
+
+ /* If all bytes have been read, re-enable the RX endpoint, which
+ * was set to NAK when the current batch of bytes was received. */
+ if (newBytes == 0) {
+ usb_set_ep_rx_count(USB_CDCACM_RX_ENDP, USB_CDCACM_RX_EPSIZE);
+ usb_set_ep_rx_stat(USB_CDCACM_RX_ENDP, USB_EP_STAT_RX_VALID);
+ rx_offset = 0;
+ }
+
+ return n_copied;
+}
+
+/* Nonblocking byte lookahead.
+ *
+ * Looks at unread bytes without marking them as read. */
+uint32 usb_cdcacm_peek(uint8* buf, uint32 len) {
int i;
if (len > newBytes) {
@@ -446,17 +467,7 @@ uint32 usb_cdcacm_rx(uint8* buf, uint32 len) {
}
for (i = 0; i < len; i++) {
- buf[i] = vcomBufferRx[i + offset];
- }
-
- newBytes -= len;
- offset += len;
-
- /* Re-enable the RX endpoint, which we had set to receive 0 bytes */
- if (newBytes == 0) {
- usb_set_ep_rx_count(USB_CDCACM_RX_ENDP, USB_CDCACM_RX_EPSIZE);
- usb_set_ep_rx_stat(USB_CDCACM_RX_ENDP, USB_EP_STAT_RX_VALID);
- offset = 0;
+ buf[i] = vcomBufferRx[i + rx_offset];
}
return len;
@@ -486,8 +497,10 @@ static void vcomDataTxCb(void) {
static void vcomDataRxCb(void) {
/* FIXME this is mad buggy */
- /* setEPRxCount on the previous cycle should garuntee
- we havnt received more bytes than we can fit */
+ /* This following is safe since sizeof(vcomBufferRx) exceeds the
+ * largest possible USB_CDCACM_RX_EPSIZE, and we set to NAK after
+ * each data packet. Only when all bytes have been read is the RX
+ * endpoint set back to VALID. */
newBytes = usb_get_ep_rx_count(USB_CDCACM_RX_ENDP);
usb_set_ep_rx_stat(USB_CDCACM_RX_ENDP, USB_EP_STAT_RX_NAK);
@@ -537,7 +550,7 @@ static void vcomDataRxCb(void) {
}
}
- usb_copy_from_pma(vcomBufferRx, newBytes, USB_CDCACM_RX_ADDR);
+ usb_copy_from_pma((uint8*)vcomBufferRx, newBytes, USB_CDCACM_RX_ADDR);
if (rx_hook) {
rx_hook(USB_CDCACM_HOOK_RX, 0);
@@ -615,11 +628,9 @@ static void usbReset(void) {
USBLIB->state = USB_ATTACHED;
SetDeviceAddress(0);
- /* reset the rx fifo */
- recvBufIn = 0;
- recvBufOut = 0;
- maxNewBytes = USB_CDCACM_RX_EPSIZE;
- countTx = 0;
+ /* Reset the RX/TX state */
+ countTx = 0;
+ rx_offset = 0;
}
static RESULT usbDataSetup(uint8 request) {