diff options
Diffstat (limited to 'libmaple/stm32f2')
26 files changed, 5478 insertions, 0 deletions
diff --git a/libmaple/stm32f2/adc.c b/libmaple/stm32f2/adc.c new file mode 100644 index 0000000..a400d7b --- /dev/null +++ b/libmaple/stm32f2/adc.c @@ -0,0 +1,84 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/adc.c + * @brief STM32F2 ADC. + */ + +#include <libmaple/adc.h> +#include <libmaple/gpio.h> + +/* + * Devices + */ + +static adc_dev adc1 = { + .regs = ADC1_BASE, + .clk_id = RCC_ADC1, +}; +/** ADC1 device. */ +const adc_dev *ADC1 = &adc1; + +static adc_dev adc2 = { + .regs = ADC2_BASE, + .clk_id = RCC_ADC2, +}; +/** ADC2 device. */ +const adc_dev *ADC2 = &adc2; + +static adc_dev adc3 = { + .regs = ADC3_BASE, + .clk_id = RCC_ADC3, +}; +/** ADC3 device. */ +const adc_dev *ADC3 = &adc3; + +/* + * Common routines + */ + +void adc_set_prescaler(adc_prescaler pre) { + uint32 ccr = ADC_COMMON_BASE->CCR; + ccr &= ~ADC_CCR_ADCPRE; + ccr |= (uint32)pre; + ADC_COMMON_BASE->CCR = ccr; +} + +void adc_foreach(void (*fn)(const adc_dev*)) { + fn(ADC1); + fn(ADC2); + fn(ADC3); +} + +void adc_config_gpio(const adc_dev *ignored, gpio_dev *gdev, uint8 bit) { + gpio_set_modef(gdev, bit, GPIO_MODE_ANALOG, GPIO_MODEF_PUPD_NONE); +} + +void adc_enable_single_swstart(const adc_dev *dev) { + adc_init(dev); + adc_enable(dev); +} diff --git a/libmaple/stm32f2/dma.c b/libmaple/stm32f2/dma.c new file mode 100644 index 0000000..26e87b9 --- /dev/null +++ b/libmaple/stm32f2/dma.c @@ -0,0 +1,504 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/dma.c + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 DMA support. + */ + +#include <libmaple/dma.h> +#include <libmaple/bitband.h> +#include <libmaple/util.h> + +/* Hack to ensure inlining in dma_irq_handler() */ +#define DMA_GET_HANDLER(dev, tube) (dev->handlers[tube].handler) +#include "dma_private.h" + +/* + * Devices + */ + +static dma_dev dma1 = { + .regs = DMA1_BASE, + .clk_id = RCC_DMA1, + .handlers = {{ .handler = NULL, .irq_line = NVIC_DMA1_STREAM0 }, + { .handler = NULL, .irq_line = NVIC_DMA1_STREAM1 }, + { .handler = NULL, .irq_line = NVIC_DMA1_STREAM2 }, + { .handler = NULL, .irq_line = NVIC_DMA1_STREAM3 }, + { .handler = NULL, .irq_line = NVIC_DMA1_STREAM4 }, + { .handler = NULL, .irq_line = NVIC_DMA1_STREAM5 }, + { .handler = NULL, .irq_line = NVIC_DMA1_STREAM6 }, + { .handler = NULL, .irq_line = NVIC_DMA1_STREAM7 }}, +}; +dma_dev *DMA1 = &dma1; + +static dma_dev dma2 = { + .regs = DMA2_BASE, + .clk_id = RCC_DMA2, + .handlers = {{ .handler = NULL, .irq_line = NVIC_DMA2_STREAM0 }, + { .handler = NULL, .irq_line = NVIC_DMA2_STREAM1 }, + { .handler = NULL, .irq_line = NVIC_DMA2_STREAM2 }, + { .handler = NULL, .irq_line = NVIC_DMA2_STREAM3 }, + { .handler = NULL, .irq_line = NVIC_DMA2_STREAM4 }, + { .handler = NULL, .irq_line = NVIC_DMA2_STREAM5 }, + { .handler = NULL, .irq_line = NVIC_DMA2_STREAM6 }, + { .handler = NULL, .irq_line = NVIC_DMA2_STREAM7 }}, +}; +dma_dev *DMA2 = &dma2; + +/* + * Helpers for dealing with dma_request_src's bit encoding (see the + * comments in the dma_request_src definition). + */ + +/* rcc_clk_id of dma_dev which supports src. */ +static __always_inline rcc_clk_id src_clk_id(dma_request_src src) { + return (rcc_clk_id)(((uint32)src >> 3) & 0x3F); +} + +/* Bit vector of streams supporting src (e.g., bit 0 set => DMA_S0 support). */ +static __always_inline uint32 src_stream_mask(dma_request_src src) { + return ((uint32)src >> 10) & 0xFF; +} + +/* Channel corresponding to src. */ +static __always_inline dma_channel src_channel(dma_request_src src) { + return (dma_channel)(src & 0x7); +} + +/* + * Routines + */ + +/* For convenience */ +#define ASSERT_NOT_ENABLED(dev, tube) ASSERT(!dma_is_enabled(dev, tube)) + +/* Helpers for dma_tube_cfg() */ +static int preconfig_check(dma_dev *dev, dma_tube tube, dma_tube_config *cfg); +static int postconfig_check(dma_tube_reg_map *dummy, dma_tube_config *cfg); +static int config_fifo(dma_tube_reg_map *dummy, dma_tube_config *cfg); +static int config_src_dst(dma_tube_reg_map *dummy, dma_tube_config *cfg); +static void copy_regs(dma_tube_reg_map *src, dma_tube_reg_map *dst); + +int dma_tube_cfg(dma_dev *dev, dma_tube tube, dma_tube_config *cfg) { + dma_tube_reg_map dummy_regs; + dma_tube_reg_map *tregs = dma_tube_regs(dev, tube); + int ret; + + /* Initial error checking. */ + ret = preconfig_check(dev, tube, cfg); + if (ret < 0) { + return ret; + } + + /* Disable `tube' as per RM0033. */ + dma_disable(dev, tube); + dma_clear_isr_bits(dev, tube); + + /* Don't write to tregs until we've decided `cfg' is really OK, + * so as not to make a half-formed mess if we have to error out. */ + copy_regs(tregs, &dummy_regs); + + /* Try to reconfigure `tube', bailing on error. */ + ret = config_fifo(&dummy_regs, cfg); + if (ret < 0) { + return ret; + } + ret = config_src_dst(&dummy_regs, cfg); + if (ret < 0) { + return ret; + } + dummy_regs.SNDTR = cfg->tube_nr_xfers; + ret = postconfig_check(&dummy_regs, cfg); + if (ret < 0) { + return ret; + } + + /* Ok, we're good. Commit to the new configuration. */ + copy_regs(&dummy_regs, tregs); + return ret; +} + +void dma_set_priority(dma_dev *dev, dma_stream stream, dma_priority priority) { + dma_tube_reg_map *tregs = dma_tube_regs(dev, stream); + uint32 scr; + ASSERT_NOT_ENABLED(dev, stream); + scr = tregs->SCR; + scr &= ~DMA_SCR_PL; + scr |= (priority << 16); + tregs->SCR = scr; +} + +void dma_set_num_transfers(dma_dev *dev, dma_tube tube, uint16 num_transfers) { + dma_tube_reg_map *tregs = dma_tube_regs(dev, tube); + ASSERT_NOT_ENABLED(dev, tube); + tregs->SNDTR = num_transfers; +} + +/** + * @brief Set memory 0 or memory 1 address. + * + * This is a general function for setting one of the two memory + * addresses available on the double-buffered STM32F2 DMA controllers. + * + * @param dev DMA device + * @param tube Tube on dev. + * @param n If 0, set memory 0 address. If 1, set memory 1 address. + * @param address Address to set + */ +void dma_set_mem_n_addr(dma_dev *dev, dma_tube tube, int n, + __io void *address) { + dma_tube_reg_map *tregs = dma_tube_regs(dev, tube); + uint32 addr = (uint32)address; + + ASSERT_NOT_ENABLED(dev, tube); + if (n) { + tregs->SM1AR = addr; + } else { + tregs->SM0AR = addr; + } +} + +void dma_set_per_addr(dma_dev *dev, dma_tube tube, __io void *address) { + dma_tube_reg_map *tregs = dma_tube_regs(dev, tube); + ASSERT_NOT_ENABLED(dev, tube); + tregs->SPAR = (uint32)address; +} + +/** + * @brief Enable a stream's FIFO. + * + * You may only call this function when the stream is disabled. + * + * @param dev DMA device + * @param tube Stream whose FIFO to enable. + */ +void dma_enable_fifo(dma_dev *dev, dma_tube tube) { + ASSERT_NOT_ENABLED(dev, tube); + bb_peri_set_bit(&(dma_tube_regs(dev, tube)->SFCR), DMA_SFCR_DMDIS_BIT, 1); +} + +/** + * @brief Disable a stream's FIFO. + * + * You may only call this function when the stream is disabled. + * + * @param dev DMA device + * @param tube Stream whose FIFO to disable. + */ +void dma_disable_fifo(dma_dev *dev, dma_tube tube) { + ASSERT_NOT_ENABLED(dev, tube); + bb_peri_set_bit(&(dma_tube_regs(dev, tube)->SFCR), DMA_SFCR_DMDIS_BIT, 0); +} + +void dma_attach_interrupt(dma_dev *dev, dma_tube tube, + void (*handler)(void)) { + dev->handlers[tube].handler = handler; + nvic_irq_enable(dev->handlers[tube].irq_line); +} + +void dma_detach_interrupt(dma_dev *dev, dma_tube tube) { + nvic_irq_disable(dev->handlers[tube].irq_line); + dev->handlers[tube].handler = NULL; +} + +void dma_enable(dma_dev *dev, dma_tube tube) { + dma_tube_reg_map *tregs = dma_tube_regs(dev, tube); + bb_peri_set_bit(&tregs->SCR, DMA_SCR_EN_BIT, 1); +} + +void dma_disable(dma_dev *dev, dma_tube tube) { + dma_tube_reg_map *tregs = dma_tube_regs(dev, tube); + bb_peri_set_bit(&tregs->SCR, DMA_SCR_EN_BIT, 0); + /* The stream might not get disabled immediately, so wait. */ + while (tregs->SCR & DMA_SCR_EN) + ; +} + +dma_irq_cause dma_get_irq_cause(dma_dev *dev, dma_tube tube) { + /* TODO: does it still make sense to have this function? We should + * probably just be returning the ISR bits, with some defines to + * pull the flags out. The lack of masked status bits is an + * annoyance that would require documentation to solve, though. */ + uint8 status_bits = dma_get_isr_bits(dev, tube); + dma_clear_isr_bits(dev, tube); + ASSERT(status_bits); /* Or something's very wrong */ + /* Don't change the order of these if statements. */ + if (status_bits & 0x0) { + return DMA_TRANSFER_FIFO_ERROR; + } else if (status_bits & 0x4) { + return DMA_TRANSFER_DME_ERROR; + } else if (status_bits & 0x8) { + return DMA_TRANSFER_ERROR; + } else if (status_bits & 0x20) { + return DMA_TRANSFER_COMPLETE; + } else if (status_bits & 0x10) { + return DMA_TRANSFER_HALF_COMPLETE; + } + + /* Something's wrong; one of those bits should have been set. Fail + * an assert, and mimic the error behavior in case of a high debug + * level. */ + ASSERT(0); + dma_disable(dev, tube); + return DMA_TRANSFER_ERROR; +} + +/* + * IRQ handlers + */ + +void __irq_dma1_stream0(void) { + dma_irq_handler(DMA1, DMA_S0); +} + +void __irq_dma1_stream1(void) { + dma_irq_handler(DMA1, DMA_S1); +} + +void __irq_dma1_stream2(void) { + dma_irq_handler(DMA1, DMA_S2); +} + +void __irq_dma1_stream3(void) { + dma_irq_handler(DMA1, DMA_S3); +} + +void __irq_dma1_stream4(void) { + dma_irq_handler(DMA1, DMA_S4); +} + +void __irq_dma1_stream5(void) { + dma_irq_handler(DMA1, DMA_S5); +} + +void __irq_dma1_stream6(void) { + dma_irq_handler(DMA1, DMA_S6); +} + +void __irq_dma1_stream7(void) { + dma_irq_handler(DMA1, DMA_S7); +} + +void __irq_dma2_stream0(void) { + dma_irq_handler(DMA2, DMA_S0); +} + +void __irq_dma2_stream1(void) { + dma_irq_handler(DMA2, DMA_S1); +} + +void __irq_dma2_stream2(void) { + dma_irq_handler(DMA2, DMA_S2); +} + +void __irq_dma2_stream3(void) { + dma_irq_handler(DMA2, DMA_S3); +} + +void __irq_dma2_stream4(void) { + dma_irq_handler(DMA2, DMA_S4); +} + +void __irq_dma2_stream5(void) { + dma_irq_handler(DMA2, DMA_S5); +} + +void __irq_dma2_stream6(void) { + dma_irq_handler(DMA2, DMA_S6); +} + +void __irq_dma2_stream7(void) { + dma_irq_handler(DMA2, DMA_S7); +} + +/* + * Auxiliary routines for dma_tube_cfg() + */ + +/* Is addr acceptable for use as DMA src/dst? */ +static int cfg_mem_ok(__io void *addr) { + enum dma_atype atype = _dma_addr_type(addr); + return atype == DMA_ATYPE_MEM || atype == DMA_ATYPE_PER; +} + +/* Is src -> dst a reasonable combination of [MEM,PER] -> [MEM,PER]? */ +static int cfg_dir_ok(dma_dev *dev, __io void *src, __io void *dst) { + switch (_dma_addr_type(dst)) { + case DMA_ATYPE_MEM: + /* Only DMA2 can do memory-to-memory */ + return ((_dma_addr_type(src) == DMA_ATYPE_PER) || + (dev->clk_id == RCC_DMA2)); + case DMA_ATYPE_PER: + /* Peripheral-to-peripheral is illegal */ + return _dma_addr_type(src) == DMA_ATYPE_PER; + default: /* Can't happen */ + ASSERT(0); + return 0; + } +} + +/* Initial sanity check for dma_tube_cfg() */ +static int preconfig_check(dma_dev *dev, dma_tube tube, + dma_tube_config *cfg) { + if (!(src_stream_mask(cfg->tube_req_src) & (1U << tube))) { + /* ->tube_req_src not supported by stream */ + return -DMA_TUBE_CFG_EREQ; + } + if (cfg->tube_nr_xfers > 65535) { + /* That's too many. */ + return -DMA_TUBE_CFG_ENDATA; + } + if (src_clk_id(cfg->tube_req_src) != dev->clk_id) { + /* ->tube_req_src not supported by dev */ + return -DMA_TUBE_CFG_EDEV; + } + if (!cfg_mem_ok(cfg->tube_src)) { + return -DMA_TUBE_CFG_ESRC; + } + if (!cfg_mem_ok(cfg->tube_dst)) { + return -DMA_TUBE_CFG_EDST; + } + if (!cfg_dir_ok(dev, cfg->tube_src, cfg->tube_dst)) { + return -DMA_TUBE_CFG_EDIR; + } + return DMA_TUBE_CFG_SUCCESS; +} + +static int config_fifo(dma_tube_reg_map *dummy, dma_tube_config *cfg) { + /* TODO: FIFO configuration based on cfg->target_data */ + uint32 sfcr = dummy->SFCR; + sfcr &= ~DMA_SFCR_FEIE; + sfcr |= (cfg->tube_flags & DMA_CFG_FIFO_ERR_IE) ? DMA_SFCR_FEIE : 0; + dummy->SFCR = sfcr; + return DMA_TUBE_CFG_SUCCESS; +} + +/* Helper for configuring (DMA_SxCR) */ +#define BITS_WE_CARE_ABOUT \ + (DMA_SCR_CHSEL | DMA_SCR_MBURST | DMA_SCR_PBURST | DMA_SCR_PINCOS | \ + DMA_SCR_MINC | DMA_SCR_PINC | DMA_SCR_CIRC | DMA_SCR_DIR | \ + DMA_SCR_PFCTRL | DMA_SCR_TCIE | DMA_SCR_HTIE | DMA_SCR_TEIE | \ + DMA_SCR_DMEIE) +static inline void config_scr(dma_tube_reg_map *dummy, dma_tube_config *cfg, + unsigned src_shift, uint32 src_inc, + unsigned dst_shift, uint32 dst_inc, + uint32 dir) { + /* These would go here if we supported them: MBURST, PBURST, + * PINCOS, PFCTRL. We explicitly choose low priority, and double + * buffering belongs elsewhere, I think. [mbolivar] */ + uint32 flags = cfg->tube_flags & BITS_WE_CARE_ABOUT; + uint32 scr = dummy->SCR; + scr &= ~(BITS_WE_CARE_ABOUT | DMA_SCR_PL); + scr |= (/* CHSEL */ + (src_channel(cfg->tube_req_src) << 25) | + /* MSIZE/PSIZE */ + (cfg->tube_src_size << src_shift) | + (cfg->tube_dst_size << dst_shift) | + /* MINC/PINC */ + ((cfg->tube_flags & DMA_CFG_SRC_INC) ? src_inc : 0) | + ((cfg->tube_flags & DMA_CFG_DST_INC) ? dst_inc : 0) | + /* DIR */ + dir | + /* Other flags carried by cfg->tube_flags */ + flags); + dummy->SCR = scr; +} +#undef BITS_WE_CARE_ABOUT + +/* Helper for when cfg->tube_dst is memory */ +static int config_to_mem(dma_tube_reg_map *dummy, dma_tube_config *cfg) { + uint32 dir = (_dma_addr_type(cfg->tube_src) == DMA_ATYPE_MEM ? + DMA_SCR_DIR_MEM_TO_MEM : DMA_SCR_DIR_PER_TO_MEM); + + if ((dir == DMA_SCR_DIR_MEM_TO_MEM) && (cfg->tube_flags & DMA_CFG_CIRC)) { + return -DMA_TUBE_CFG_ECFG; /* Can't do DMA_CFG_CIRC and mem->mem. */ + } + + config_scr(dummy, cfg, 11, DMA_SCR_PINC, 13, DMA_SCR_MINC, dir); + dummy->SPAR = (uint32)cfg->tube_src; + dummy->SM0AR = (uint32)cfg->tube_dst; + return DMA_TUBE_CFG_SUCCESS; +} + +/* Helper for when cfg->tube_src is peripheral */ +static int config_to_per(dma_tube_reg_map *dummy, dma_tube_config *cfg) { + config_scr(dummy, cfg, 13, DMA_SCR_MINC, 11, DMA_SCR_PINC, + DMA_SCR_DIR_MEM_TO_PER); + dummy->SM0AR = (uint32)cfg->tube_src; + dummy->SPAR = (uint32)cfg->tube_dst; + return DMA_TUBE_CFG_SUCCESS; +} + +/* Configures SCR, SPAR, SM0AR, and checks that the result is OK. */ +static int config_src_dst(dma_tube_reg_map *dummy, dma_tube_config *cfg) { + switch (_dma_addr_type(cfg->tube_dst)) { + case DMA_ATYPE_MEM: + return config_to_mem(dummy, cfg); + case DMA_ATYPE_PER: + return config_to_per(dummy, cfg); + case DMA_ATYPE_OTHER: + default: /* shut up, GCC */ + /* Can't happen */ + ASSERT(0); + return -DMA_TUBE_CFG_ECFG; + } +} + +/* Final checks we can only perform when fully configured */ +static int postconfig_check(dma_tube_reg_map *dummy, dma_tube_config *cfg) { + /* TODO add dma_get_[mem,per]_size() and use them here */ + /* msize and psize are in bytes here: */ + uint32 scr = dummy->SCR; + uint32 msize = 1U << ((scr >> 13) & 0x3); + uint32 psize = 1U << ((scr >> 11) & 0x3); + + /* Ensure NDT will work with PSIZE/MSIZE. + * + * RM0033 specifies that PSIZE, MSIZE, and NDT must be such that + * the last transfer completes; i.e. that if PSIZE < MSIZE, then + * NDT is a multiple of MSIZE/PSIZE. See e.g. Table 27. */ + if ((psize < msize) && (cfg->tube_nr_xfers % (msize / psize))) { + return -DMA_TUBE_CFG_ENDATA; + } + + /* Direct mode is only possible if MSIZE == PSIZE. */ + if ((msize != psize) && !(dummy->SFCR & DMA_SFCR_DMDIS)) { + return -DMA_TUBE_CFG_ESIZE; + } + + return DMA_TUBE_CFG_SUCCESS; +} + +/* Convenience for dealing with dummy registers */ +static void copy_regs(dma_tube_reg_map *src, dma_tube_reg_map *dst) { + dst->SCR = src->SCR; + dst->SNDTR = src->SNDTR; + dst->SPAR = src->SPAR; + dst->SM0AR = src->SM0AR; + dst->SFCR = src->SFCR; +} diff --git a/libmaple/stm32f2/exti.c b/libmaple/stm32f2/exti.c new file mode 100644 index 0000000..208415f --- /dev/null +++ b/libmaple/stm32f2/exti.c @@ -0,0 +1,33 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +#include <libmaple/exti.h> +#include <libmaple/syscfg.h> +#include "exti_private.h" + +void exti_select(exti_num num, exti_cfg cfg) { + exti_do_select(&SYSCFG_BASE->EXTICR[num / 4], num, cfg); +} diff --git a/libmaple/stm32f2/fsmc.c b/libmaple/stm32f2/fsmc.c new file mode 100644 index 0000000..ec41720 --- /dev/null +++ b/libmaple/stm32f2/fsmc.c @@ -0,0 +1,90 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/fsmc.c + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 FSMC support. + */ + +#include <libmaple/fsmc.h> +#include <libmaple/gpio.h> + +#define CONFIG_GPIO(dev, bit) \ + do { \ + gpio_set_modef(dev, bit, GPIO_MODE_AF, GPIO_MODEF_SPEED_HIGH); \ + gpio_set_af(dev, bit, GPIO_AF_FSMC_SDIO_OTG_FS); \ + } while (0) +void fsmc_sram_init_gpios(void) { + /* Data lines... */ + CONFIG_GPIO(GPIOD, 0); + CONFIG_GPIO(GPIOD, 1); + CONFIG_GPIO(GPIOD, 8); + CONFIG_GPIO(GPIOD, 9); + CONFIG_GPIO(GPIOD, 10); + CONFIG_GPIO(GPIOD, 14); + CONFIG_GPIO(GPIOD, 15); + CONFIG_GPIO(GPIOE, 7); + CONFIG_GPIO(GPIOE, 8); + CONFIG_GPIO(GPIOE, 9); + CONFIG_GPIO(GPIOE, 10); + CONFIG_GPIO(GPIOE, 11); + CONFIG_GPIO(GPIOE, 12); + CONFIG_GPIO(GPIOE, 13); + CONFIG_GPIO(GPIOE, 14); + CONFIG_GPIO(GPIOE, 15); + + /* Address lines... */ + CONFIG_GPIO(GPIOD, 11); + CONFIG_GPIO(GPIOD, 12); + CONFIG_GPIO(GPIOD, 13); + CONFIG_GPIO(GPIOF, 0); + CONFIG_GPIO(GPIOF, 1); + CONFIG_GPIO(GPIOF, 2); + CONFIG_GPIO(GPIOF, 3); + CONFIG_GPIO(GPIOF, 4); + CONFIG_GPIO(GPIOF, 5); + CONFIG_GPIO(GPIOF, 12); + CONFIG_GPIO(GPIOF, 13); + CONFIG_GPIO(GPIOF, 14); + CONFIG_GPIO(GPIOF, 15); + CONFIG_GPIO(GPIOG, 0); + CONFIG_GPIO(GPIOG, 1); + CONFIG_GPIO(GPIOG, 2); + CONFIG_GPIO(GPIOG, 3); + CONFIG_GPIO(GPIOG, 4); + CONFIG_GPIO(GPIOG, 5); + + /* And control lines... */ + CONFIG_GPIO(GPIOD, 4); + CONFIG_GPIO(GPIOD, 5); + CONFIG_GPIO(GPIOD, 7); + CONFIG_GPIO(GPIOG, 9); + CONFIG_GPIO(GPIOG, 10); + CONFIG_GPIO(GPIOG, 12); + CONFIG_GPIO(GPIOE, 0); + CONFIG_GPIO(GPIOE, 1); +} diff --git a/libmaple/stm32f2/gpio.c b/libmaple/stm32f2/gpio.c new file mode 100644 index 0000000..a26edaa --- /dev/null +++ b/libmaple/stm32f2/gpio.c @@ -0,0 +1,194 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/gpio.c + * @brief STM32F2 GPIO. + */ + +#include <libmaple/gpio.h> +#include <libmaple/rcc.h> +#include <libmaple/bitband.h> + +/* + * GPIO devices + */ + +gpio_dev gpioa = { + .regs = GPIOA_BASE, + .clk_id = RCC_GPIOA, + .exti_port = EXTI_PA, +}; +/** GPIO port A device. */ +gpio_dev* const GPIOA = &gpioa; + +gpio_dev gpiob = { + .regs = GPIOB_BASE, + .clk_id = RCC_GPIOB, + .exti_port = EXTI_PB, +}; +/** GPIO port B device. */ +gpio_dev* const GPIOB = &gpiob; + +gpio_dev gpioc = { + .regs = GPIOC_BASE, + .clk_id = RCC_GPIOC, + .exti_port = EXTI_PC, +}; +/** GPIO port C device. */ +gpio_dev* const GPIOC = &gpioc; + +gpio_dev gpiod = { + .regs = GPIOD_BASE, + .clk_id = RCC_GPIOD, + .exti_port = EXTI_PD, +}; +/** GPIO port D device. */ +gpio_dev* const GPIOD = &gpiod; + +gpio_dev gpioe = { + .regs = GPIOE_BASE, + .clk_id = RCC_GPIOE, + .exti_port = EXTI_PE, +}; +/** GPIO port E device. */ +gpio_dev* const GPIOE = &gpioe; + +gpio_dev gpiof = { + .regs = GPIOF_BASE, + .clk_id = RCC_GPIOF, + .exti_port = EXTI_PF, +}; +/** GPIO port F device. */ +gpio_dev* const GPIOF = &gpiof; + +gpio_dev gpiog = { + .regs = GPIOG_BASE, + .clk_id = RCC_GPIOG, + .exti_port = EXTI_PG, +}; +/** GPIO port G device. */ +gpio_dev* const GPIOG = &gpiog; + +gpio_dev gpioh = { + .regs = GPIOH_BASE, + .clk_id = RCC_GPIOH, + .exti_port = EXTI_PH, +}; +/** GPIO port G device. */ +gpio_dev* const GPIOH = &gpioh; + +gpio_dev gpioi = { + .regs = GPIOI_BASE, + .clk_id = RCC_GPIOI, + .exti_port = EXTI_PI, +}; +/** GPIO port G device. */ +gpio_dev* const GPIOI = &gpioi; + +/* + * GPIO routines + */ + +/** + * Initialize and reset all available GPIO devices. + */ +void gpio_init_all(void) { + gpio_init(GPIOA); + gpio_init(GPIOB); + gpio_init(GPIOC); + gpio_init(GPIOD); + gpio_init(GPIOE); + gpio_init(GPIOF); + gpio_init(GPIOG); + gpio_init(GPIOH); + gpio_init(GPIOI); +} + +/** + * @brief Set the mode of a GPIO pin. + * @param dev GPIO device. + * @param bit Bit on dev whose mode to set, 0--15. + * @param mode Mode to set the pin to. + * @param flags Flags to modify basic mode configuration + */ +void gpio_set_modef(gpio_dev *dev, + uint8 bit, + gpio_pin_mode mode, + unsigned flags) { + gpio_reg_map *regs = dev->regs; + unsigned shift = bit * 2; + uint32 tmp; + + /* Mode */ + tmp = regs->MODER; + tmp &= ~(0x3 << shift); + tmp |= mode << shift; + regs->MODER = tmp; + + /* Output type */ + bb_peri_set_bit(®s->OTYPER, bit, flags & 0x1); + + /* Speed */ + tmp = regs->OSPEEDR; + tmp &= ~(0x3 << shift); + tmp |= ((flags >> 1) & 0x3) << shift; + regs->OSPEEDR = tmp; + + /* Pull-up/pull-down */ + tmp = regs->PUPDR; + tmp &= ~(0x3 << shift); + tmp |= ((flags >> 3) & 0x3) << shift; + regs->PUPDR = tmp; +} + +/** + * @brief Set a pin's alternate function. + * + * The pin must have its mode set to GPIO_MODE_AF for this to take + * effect. + * + * @param dev Device whose pin to configure. + * @param bit Pin whose alternate function to set. + * @param af Alternate function to use for pin. + * @see gpio_set_modef() + */ +void gpio_set_af(gpio_dev *dev, uint8 bit, gpio_af af) { + __io uint32 *afr; + unsigned shift; + uint32 tmp; + if (bit >= 8) { + afr = &dev->regs->AFRH; + shift = 4 * (bit - 8); + } else{ + afr = &dev->regs->AFRL; + shift = 4 * bit; + } + tmp = *afr; + tmp &= ~(0xF << shift); + tmp |= (af << shift); + *afr = tmp; +} diff --git a/libmaple/stm32f2/include/series/adc.h b/libmaple/stm32f2/include/series/adc.h new file mode 100644 index 0000000..714179c --- /dev/null +++ b/libmaple/stm32f2/include/series/adc.h @@ -0,0 +1,331 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/adc.h + * @author Marti Bolivar <mbolivar@leaflabs.com>, + * @brief STM32F2 ADC support. + */ + +#ifndef _LIBMAPLE_STM32F2_ADC_H_ +#define _LIBMAPLE_STM32F2_ADC_H_ + +#include <libmaple/libmaple_types.h> + +/* + * Devices + */ + +extern const struct adc_dev *ADC1; +extern const struct adc_dev *ADC2; +extern const struct adc_dev *ADC3; + +/* + * Common register map + */ + +/** ADC common register map type */ +typedef struct adc_common_reg_map { + __io uint32 CSR; /**< Common status register */ + __io uint32 CCR; /**< Common control register */ + __io uint32 CDR; /**< + * @brief Common regular data register + * for dual and triple modes */ +} adc_common_reg_map; + +/* + * Register map base pointers + */ + +/** ADC1 register map base pointer. */ +#define ADC1_BASE ((struct adc_reg_map*)0x40012000) +/** ADC2 register map base pointer. */ +#define ADC2_BASE ((struct adc_reg_map*)0x40012100) +/** ADC3 register map base pointer. */ +#define ADC3_BASE ((struct adc_reg_map*)0x40012200) +/** ADC common register map base pointer. */ +#define ADC_COMMON_BASE ((struct adc_common_reg_map*)0x40012300) + +/* + * Register bit definitions + */ + +/* Status register */ + +/** Overrun bit. */ +#define ADC_SR_OVR_BIT 5 +/** Overrun. */ +#define ADC_SR_OVR (1U << ADC_SR_OVR_BIT) + +/* Control register 1 */ + +/** Overrun interrupt enable bit. */ +#define ADC_CR1_OVRIE_BIT 26 + +/** Overrun interrupt error enable. */ +#define ADC_CR1_OVRIE (1U << ADC_CR1_OVRIE_BIT) +/** Conversion resolution. */ +#define ADC_CR1_RES (0x3U << 24) +/** Conversion resolution: 12 bit (at least 15 ADCCLK cycles). */ +#define ADC_CR1_RES_12BIT (0x0U << 24) +/** Conversion resolution: 10 bit (at least 13 ADCCLK cycles). */ +#define ADC_CR1_RES_10BIT (0x1U << 24) +/** Conversion resolution: 8 bit (at least 11 ADCCLK cycles). */ +#define ADC_CR1_RES_8BIT (0x2U << 24) +/** Conversion resolution: 6 bit (at least 9 ADCCLK cycles). */ +#define ADC_CR1_RES_6BIT (0x3U << 24) + +/* Control register 2 */ + +#define ADC_CR2_SWSTART_BIT 30 +#define ADC_CR2_JSWSTART_BIT 22 +#define ADC_CR2_ALIGN_BIT 11 +#define ADC_CR2_EOCS_BIT 10 +#define ADC_CR2_DDS_BIT 9 +#define ADC_CR2_DMA_BIT 8 +#define ADC_CR2_CONT_BIT 1 +#define ADC_CR2_ADON_BIT 0 + +#define ADC_CR2_SWSTART (1U << ADC_CR2_SWSTART_BIT) +#define ADC_CR2_EXTEN (0x3 << 28) +#define ADC_CR2_EXTEN_DISABLED (0x0 << 28) +#define ADC_CR2_EXTEN_RISE (0x1 << 28) +#define ADC_CR2_EXTEN_FALL (0x2 << 28) +#define ADC_CR2_EXTEN_RISE_FALL (0x3 << 28) +#define ADC_CR2_EXTSEL (0xF << 24) +#define ADC_CR2_EXTSEL_TIM1_CC1 (0x0 << 24) +#define ADC_CR2_EXTSEL_TIM1_CC2 (0x1 << 24) +#define ADC_CR2_EXTSEL_TIM1_CC3 (0x2 << 24) +#define ADC_CR2_EXTSEL_TIM2_CC2 (0x3 << 24) +#define ADC_CR2_EXTSEL_TIM2_CC3 (0x4 << 24) +#define ADC_CR2_EXTSEL_TIM2_CC4 (0x5 << 24) +#define ADC_CR2_EXTSEL_TIM1_TRGO (0x6 << 24) +#define ADC_CR2_EXTSEL_TIM3_CC1 (0x7 << 24) +#define ADC_CR2_EXTSEL_TIM3_TRGO (0x8 << 24) +#define ADC_CR2_EXTSEL_TIM4_CC4 (0x9 << 24) +#define ADC_CR2_EXTSEL_TIM5_CC1 (0xA << 24) +#define ADC_CR2_EXTSEL_TIM5_CC2 (0xB << 24) +#define ADC_CR2_EXTSEL_TIM5_CC3 (0xC << 24) +#define ADC_CR2_EXTSEL_TIM8_CC1 (0xD << 24) +#define ADC_CR2_EXTSEL_TIM8_TRGO (0xE << 24) +#define ADC_CR2_EXTSEL_TIM1_EXTI11 (0xF << 24) +#define ADC_CR2_JSWSTART (1U << ADC_CR2_JSWSTART_BIT) +#define ADC_CR2_JEXTEN (0x3 << 20) +#define ADC_CR2_JEXTEN_DISABLED (0x0 << 20) +#define ADC_CR2_JEXTEN_RISE (0x1 << 20) +#define ADC_CR2_JEXTEN_FALL (0x2 << 20) +#define ADC_CR2_JEXTEN_RISE_FALL (0x3 << 20) +#define ADC_CR2_JEXTSEL (0xF << 16) +#define ADC_CR2_JEXTSEL_TIM1_CC4 (0x0 << 16) +#define ADC_CR2_JEXTSEL_TIM1_TRGO (0x1 << 16) +#define ADC_CR2_JEXTSEL_TIM2_CC1 (0x2 << 16) +#define ADC_CR2_JEXTSEL_TIM2_TRGO (0x3 << 16) +#define ADC_CR2_JEXTSEL_TIM3_CC2 (0x4 << 16) +#define ADC_CR2_JEXTSEL_TIM3_CC4 (0x5 << 16) +#define ADC_CR2_JEXTSEL_TIM4_CC1 (0x6 << 16) +#define ADC_CR2_JEXTSEL_TIM4_CC2 (0x7 << 16) +#define ADC_CR2_JEXTSEL_TIM4_CC3 (0x8 << 16) +#define ADC_CR2_JEXTSEL_TIM4_TRGO (0x9 << 16) +#define ADC_CR2_JEXTSEL_TIM5_CC4 (0xA << 16) +#define ADC_CR2_JEXTSEL_TIM5_TRGO (0xB << 16) +#define ADC_CR2_JEXTSEL_TIM8_CC2 (0xC << 16) +#define ADC_CR2_JEXTSEL_TIM8_CC3 (0xD << 16) +#define ADC_CR2_JEXTSEL_TIM8_CC4 (0xE << 16) +#define ADC_CR2_JEXTSEL_TIM1_EXTI15 (0xF << 16) +#define ADC_CR2_ALIGN (1U << ADC_CR2_ALIGN_BIT) +#define ADC_CR2_ALIGN_RIGHT (0U << ADC_CR2_ALIGN_BIT) +#define ADC_CR2_ALIGN_LEFT (1U << ADC_CR2_ALIGN_BIT) +#define ADC_CR2_EOCS (1U << ADC_CR2_EOCS_BIT) +#define ADC_CR2_EOCS_SEQUENCE (0U << ADC_CR2_EOCS_BIT) +#define ADC_CR2_EOCS_CONVERSION (1U << ADC_CR2_EOCS_BIT) +#define ADC_CR2_DDS (1U << ADC_CR2_DDS_BIT) +#define ADC_CR2_DMA (1U << ADC_CR2_DMA_BIT) +#define ADC_CR2_CONT (1U << ADC_CR2_CONT_BIT) +#define ADC_CR2_ADON (1U << ADC_CR2_ADON_BIT) + +/* Common status register */ + +#define ADC_CSR_OVR3_BIT 21 +#define ADC_CSR_STRT3_BIT 20 +#define ADC_CSR_JSTRT3_BIT 19 +#define ADC_CSR_JEOC3_BIT 18 +#define ADC_CSR_EOC3_BIT 17 +#define ADC_CSR_AWD3_BIT 16 +#define ADC_CSR_OVR2_BIT 13 +#define ADC_CSR_STRT2_BIT 12 +#define ADC_CSR_JSTRT2_BIT 11 +#define ADC_CSR_JEOC2_BIT 10 +#define ADC_CSR_EOC2_BIT 9 +#define ADC_CSR_AWD2_BIT 8 +#define ADC_CSR_OVR1_BIT 5 +#define ADC_CSR_STRT1_BIT 4 +#define ADC_CSR_JSTRT1_BIT 3 +#define ADC_CSR_JEOC1_BIT 2 +#define ADC_CSR_EOC1_BIT 1 +#define ADC_CSR_AWD1_BIT 0 + +#define ADC_CSR_OVR3 (1U << ADC_CSR_OVR3_BIT) +#define ADC_CSR_STRT3 (1U << ADC_CSR_STRT3_BIT) +#define ADC_CSR_JSTRT3 (1U << ADC_CSR_JSTRT3_BIT) +#define ADC_CSR_JEOC3 (1U << ADC_CSR_JEOC3_BIT) +#define ADC_CSR_EOC3 (1U << ADC_CSR_EOC3_BIT) +#define ADC_CSR_AWD3 (1U << ADC_CSR_AWD3_BIT) +#define ADC_CSR_OVR2 (1U << ADC_CSR_OVR2_BIT) +#define ADC_CSR_STRT2 (1U << ADC_CSR_STRT2_BIT) +#define ADC_CSR_JSTRT2 (1U << ADC_CSR_JSTRT2_BIT) +#define ADC_CSR_JEOC2 (1U << ADC_CSR_JEOC2_BIT) +#define ADC_CSR_EOC2 (1U << ADC_CSR_EOC2_BIT) +#define ADC_CSR_AWD2 (1U << ADC_CSR_AWD2_BIT) +#define ADC_CSR_OVR1 (1U << ADC_CSR_OVR1_BIT) +#define ADC_CSR_STRT1 (1U << ADC_CSR_STRT1_BIT) +#define ADC_CSR_JSTRT1 (1U << ADC_CSR_JSTRT1_BIT) +#define ADC_CSR_JEOC1 (1U << ADC_CSR_JEOC1_BIT) +#define ADC_CSR_EOC1 (1U << ADC_CSR_EOC1_BIT) +#define ADC_CSR_AWD1 (1U << ADC_CSR_AWD1_BIT) + +/* Common control register */ + +#define ADC_CCR_TSVREFE_BIT 23 +#define ADC_CCR_VBATE_BIT 22 +#define ADC_CCR_DDS_BIT 13 + +#define ADC_CCR_TSVREFE (1U << ADC_CCR_TSVREFE_BIT) +#define ADC_CCR_VBATE (1U << ADC_CCR_VBATE_BIT) +#define ADC_CCR_ADCPRE (0x3 << 16) +#define ADC_CCR_ADCPRE_PCLK2_DIV_2 (0x0 << 16) +#define ADC_CCR_ADCPRE_PCLK2_DIV_4 (0x1 << 16) +#define ADC_CCR_ADCPRE_PCLK2_DIV_6 (0x2 << 16) +#define ADC_CCR_ADCPRE_PCLK2_DIV_8 (0x3 << 16) +#define ADC_CCR_DMA (0x3 << 14) +#define ADC_CCR_DMA_DIS (0x0 << 14) +#define ADC_CCR_DMA_MODE_1 (0x1 << 14) +#define ADC_CCR_DMA_MODE_2 (0x2 << 14) +#define ADC_CCR_DMA_MODE_3 (0x3 << 14) +#define ADC_CCR_DDS (1U << ADC_CCR_DDS_BIT) +#define ADC_CCR_DELAY (0xF << 8) +#define ADC_CCR_DELAY_5 (0x0 << 8) +#define ADC_CCR_DELAY_6 (0x1 << 8) +#define ADC_CCR_DELAY_7 (0x2 << 8) +#define ADC_CCR_DELAY_8 (0x3 << 8) +#define ADC_CCR_DELAY_9 (0x4 << 8) +#define ADC_CCR_DELAY_10 (0x5 << 8) +#define ADC_CCR_DELAY_11 (0x6 << 8) +#define ADC_CCR_DELAY_12 (0x7 << 8) +#define ADC_CCR_DELAY_13 (0x8 << 8) +#define ADC_CCR_DELAY_14 (0x9 << 8) +#define ADC_CCR_DELAY_15 (0xA << 8) +#define ADC_CCR_DELAY_16 (0xB << 8) +#define ADC_CCR_DELAY_17 (0xC << 8) +#define ADC_CCR_DELAY_18 (0xD << 8) +#define ADC_CCR_DELAY_19 (0xE << 8) +#define ADC_CCR_DELAY_20 (0xF << 8) +/** Multi ADC mode selection. */ +#define ADC_CCR_MULTI 0x1F +/** All ADCs independent. */ +#define ADC_CCR_MULTI_INDEPENDENT 0x0 +/** Dual mode: combined regular simultaneous/injected simultaneous. */ +#define ADC_CCR_MULTI_DUAL_REG_SIM_INJ_SIM 0x1 +/** Dual mode: combined regular simultaneous/alternate trigger. */ +#define ADC_CCR_MULTI_DUAL_REG_SIM_ALT_TRIG 0x2 +/** Dual mode: injected simultaneous mode only. */ +#define ADC_CCR_MULTI_DUAL_INJ_SIM 0x5 +/** Dual mode: regular simultaneous mode only. */ +#define ADC_CCR_MULTI_DUAL_REG_SIM 0x6 +/** Dual mode: interleaved mode only. */ +#define ADC_CCR_MULTI_DUAL_INTER 0x7 +/** Dual mode: alternate trigger mode only. */ +#define ADC_CCR_MULTI_DUAL_ALT_TRIG 0x9 +/** Triple mode: combined regular simultaneous/injected simultaneous. */ +#define ADC_CCR_MULTI_TRIPLE_REG_SIM_INJ_SIM 0x10 +/** Triple mode: combined regular simultaneous/alternate trigger. */ +#define ADC_CCR_MULTI_TRIPLE_REG_SIM_ALT_TRIG 0x11 +/** Triple mode: injected simultaneous mode only. */ +#define ADC_CCR_MULTI_TRIPLE_INJ_SIM 0x12 +/** Triple mode: regular simultaneous mode only. */ +#define ADC_CCR_MULTI_TRIPLE_REG_SIM 0x15 +/** Triple mode: interleaved mode only. */ +#define ADC_CCR_MULTI_TRIPLE_INTER 0x17 +/** Triple mode: alternate trigger mode only. */ +#define ADC_CCR_MULTI_TRIPLE_ALT_TRIG 0x19 + +/* Common regular data register for dual and triple modes */ + +#define ADC_CDR_DATA2 0xFFFF0000 +#define ADC_CDR_DATA1 0xFFFF + +/* + * Other types + */ + +/** + * @brief STM32F2 external event selectors for regular group + * conversion. + * @see adc_set_extsel() + */ +typedef enum adc_extsel_event { + ADC_EXT_EV_TIM1_CC1 = ADC_CR2_EXTSEL_TIM1_CC1, + ADC_EXT_EV_TIM1_CC2 = ADC_CR2_EXTSEL_TIM1_CC2, + ADC_EXT_EV_TIM1_CC3 = ADC_CR2_EXTSEL_TIM1_CC3, + ADC_EXT_EV_TIM2_CC2 = ADC_CR2_EXTSEL_TIM2_CC2, + ADC_EXT_EV_TIM2_CC3 = ADC_CR2_EXTSEL_TIM2_CC3, + ADC_EXT_EV_TIM2_CC4 = ADC_CR2_EXTSEL_TIM2_CC4, + ADC_EXT_EV_TIM1_TRGO = ADC_CR2_EXTSEL_TIM1_TRGO, + ADC_EXT_EV_TIM3_CC1 = ADC_CR2_EXTSEL_TIM3_CC1, + ADC_EXT_EV_TIM3_TRGO = ADC_CR2_EXTSEL_TIM3_TRGO, + ADC_EXT_EV_TIM4_CC4 = ADC_CR2_EXTSEL_TIM4_CC4, + ADC_EXT_EV_TIM5_CC1 = ADC_CR2_EXTSEL_TIM5_CC1, + ADC_EXT_EV_TIM5_CC2 = ADC_CR2_EXTSEL_TIM5_CC2, + ADC_EXT_EV_TIM5_CC3 = ADC_CR2_EXTSEL_TIM5_CC3, + ADC_EXT_EV_TIM8_CC1 = ADC_CR2_EXTSEL_TIM8_CC1, + ADC_EXT_EV_TIM8_TRGO = ADC_CR2_EXTSEL_TIM8_TRGO, + ADC_EXT_EV_TIM1_EXTI11 = ADC_CR2_EXTSEL_TIM1_EXTI11, +} adc_extsel_event; + +/** + * @brief STM32F2 sample times, in ADC clock cycles. + */ +typedef enum adc_smp_rate { + ADC_SMPR_3, /**< 3 ADC cycles */ + ADC_SMPR_15, /**< 15 ADC cycles */ + ADC_SMPR_28, /**< 28 ADC cycles */ + ADC_SMPR_56, /**< 56 ADC cycles */ + ADC_SMPR_84, /**< 84 ADC cycles */ + ADC_SMPR_112, /**< 112 ADC cycles */ + ADC_SMPR_144, /**< 144 ADC cycles */ + ADC_SMPR_480, /**< 480 ADC cycles */ +} adc_smp_rate; + +/** + * @brief STM32F2 ADC prescalers, as divisors of PCLK2. + */ +typedef enum adc_prescaler { + ADC_PRE_PCLK2_DIV_2 = ADC_CCR_ADCPRE_PCLK2_DIV_2, /** PCLK2 divided by 2 */ + ADC_PRE_PCLK2_DIV_4 = ADC_CCR_ADCPRE_PCLK2_DIV_4, /** PCLK2 divided by 4 */ + ADC_PRE_PCLK2_DIV_6 = ADC_CCR_ADCPRE_PCLK2_DIV_6, /** PCLK2 divided by 6 */ + ADC_PRE_PCLK2_DIV_8 = ADC_CCR_ADCPRE_PCLK2_DIV_8, /** PCLK2 divided by 8 */ +} adc_prescaler; + +#endif diff --git a/libmaple/stm32f2/include/series/dac.h b/libmaple/stm32f2/include/series/dac.h new file mode 100644 index 0000000..0a578ca --- /dev/null +++ b/libmaple/stm32f2/include/series/dac.h @@ -0,0 +1,94 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/dac.h + * @brief STM32F2 DAC support + */ + +#ifndef _LIBMAPLE_STM32F2_DAC_H_ +#define _LIBMAPLE_STM32F2_DAC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * Register map type + */ + +/** STM32F2 DAC register map type. */ +typedef struct dac_reg_map { + __io uint32 CR; /**< Control register */ + __io uint32 SWTRIGR; /**< Software trigger register */ + __io uint32 DHR12R1; /**< Channel 1 12-bit right-aligned data + holding register */ + __io uint32 DHR12L1; /**< Channel 1 12-bit left-aligned data + holding register */ + __io uint32 DHR8R1; /**< Channel 1 8-bit left-aligned data + holding register */ + __io uint32 DHR12R2; /**< Channel 2 12-bit right-aligned data + holding register */ + __io uint32 DHR12L2; /**< Channel 2 12-bit left-aligned data + holding register */ + __io uint32 DHR8R2; /**< Channel 2 8-bit left-aligned data + holding register */ + __io uint32 DHR12RD; /**< Dual DAC 12-bit right-aligned data + holding register */ + __io uint32 DHR12LD; /**< Dual DAC 12-bit left-aligned data + holding register */ + __io uint32 DHR8RD; /**< Dual DAC 8-bit right-aligned data holding + register */ + __io uint32 DOR1; /**< Channel 1 data output register */ + __io uint32 DOR2; /**< Channel 2 data output register */ + __io uint32 SR; /**< Status register */ +} dac_reg_map; + +/* + * Register bit definitions + */ + +/* Control register */ + +#define DAC_CR_DMAUDRIE1 (1U << 13) /* Channel 1 DMA underrun + * interrupt enable */ +#define DAC_CR_DMAUDRIE2 (1U << 29) /* Channel 2 DMA underrun + * interrupt enable */ + +/* Status register */ + +#define DAC_SR_DMAUDR1 (1U << 13) /* Channel 1 DMA underrun + * occurred */ +#define DAC_SR_DMAUDR2 (1U << 29) /* Channel 2 DMA underrun + * ocurred */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/dma.h b/libmaple/stm32f2/include/series/dma.h new file mode 100644 index 0000000..43bd1a2 --- /dev/null +++ b/libmaple/stm32f2/include/series/dma.h @@ -0,0 +1,810 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/dma.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 DMA series header + */ + +#ifndef _LIBMAPLE_STM32F2_DMA_H_ +#define _LIBMAPLE_STM32F2_DMA_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/dma_common.h> +#include <libmaple/libmaple_types.h> + +/* + * Register map and base pointers + */ + +/** + * @brief STM32F2 DMA register map type. + */ +typedef struct dma_reg_map { + /* Isn't it nice how on F1, it's CCR1, but on F2, it's S1CR? */ + + /* Global DMA registers */ + __io uint32 LISR; /**< Low interrupt status register */ + __io uint32 HISR; /**< High interrupt status register */ + __io uint32 LIFCR; /**< Low interrupt flag clear register */ + __io uint32 HIFCR; /**< High interrupt flag clear register */ + /* Stream 0 registers */ + __io uint32 S0CR; /**< Stream 0 control register */ + __io uint32 S0NDTR; /**< Stream 0 number of data register */ + __io uint32 S0PAR; /**< Stream 0 peripheral address register */ + __io uint32 S0M0AR; /**< Stream 0 memory 0 address register */ + __io uint32 S0M1AR; /**< Stream 0 memory 1 address register */ + __io uint32 S0FCR; /**< Stream 0 FIFO control register */ + /* Stream 1 registers */ + __io uint32 S1CR; /**< Stream 1 control register */ + __io uint32 S1NDTR; /**< Stream 1 number of data register */ + __io uint32 S1PAR; /**< Stream 1 peripheral address register */ + __io uint32 S1M0AR; /**< Stream 1 memory 0 address register */ + __io uint32 S1M1AR; /**< Stream 1 memory 1 address register */ + __io uint32 S1FCR; /**< Stream 1 FIFO control register */ + /* Stream 2 registers */ + __io uint32 S2CR; /**< Stream 2 control register */ + __io uint32 S2NDTR; /**< Stream 2 number of data register */ + __io uint32 S2PAR; /**< Stream 2 peripheral address register */ + __io uint32 S2M0AR; /**< Stream 2 memory 0 address register */ + __io uint32 S2M1AR; /**< Stream 2 memory 1 address register */ + __io uint32 S2FCR; /**< Stream 2 FIFO control register */ + /* Stream 3 registers */ + __io uint32 S3CR; /**< Stream 3 control register */ + __io uint32 S3NDTR; /**< Stream 3 number of data register */ + __io uint32 S3PAR; /**< Stream 3 peripheral address register */ + __io uint32 S3M0AR; /**< Stream 3 memory 0 address register */ + __io uint32 S3M1AR; /**< Stream 3 memory 1 address register */ + __io uint32 S3FCR; /**< Stream 3 FIFO control register */ + /* Stream 4 registers */ + __io uint32 S4CR; /**< Stream 4 control register */ + __io uint32 S4NDTR; /**< Stream 4 number of data register */ + __io uint32 S4PAR; /**< Stream 4 peripheral address register */ + __io uint32 S4M0AR; /**< Stream 4 memory 0 address register */ + __io uint32 S4M1AR; /**< Stream 4 memory 1 address register */ + __io uint32 S4FCR; /**< Stream 4 FIFO control register */ + /* Stream 5 registers */ + __io uint32 S5CR; /**< Stream 5 control register */ + __io uint32 S5NDTR; /**< Stream 5 number of data register */ + __io uint32 S5PAR; /**< Stream 5 peripheral address register */ + __io uint32 S5M0AR; /**< Stream 5 memory 0 address register */ + __io uint32 S5M1AR; /**< Stream 5 memory 1 address register */ + __io uint32 S5FCR; /**< Stream 5 FIFO control register */ + /* Stream 6 registers */ + __io uint32 S6CR; /**< Stream 6 control register */ + __io uint32 S6NDTR; /**< Stream 6 number of data register */ + __io uint32 S6PAR; /**< Stream 6 peripheral address register */ + __io uint32 S6M0AR; /**< Stream 6 memory 0 address register */ + __io uint32 S6M1AR; /**< Stream 6 memory 1 address register */ + __io uint32 S6FCR; /**< Stream 6 FIFO control register */ + /* Stream 7 registers */ + __io uint32 S7CR; /**< Stream 7 control register */ + __io uint32 S7NDTR; /**< Stream 7 number of data register */ + __io uint32 S7PAR; /**< Stream 7 peripheral address register */ + __io uint32 S7M0AR; /**< Stream 7 memory 0 address register */ + __io uint32 S7M1AR; /**< Stream 7 memory 1 address register */ + __io uint32 S7FCR; /**< Stream 7 FIFO control register */ +} dma_reg_map; + +/** DMA controller 1 register map base pointer */ +#define DMA1_BASE ((struct dma_reg_map*)0x40026000) +/** DMA controller 2 register map base pointer */ +#define DMA2_BASE ((struct dma_reg_map*)0x40026400) + +/** + * @brief STM32F2 DMA stream (i.e. tube) register map type. + * Provides access to an individual stream's registers. + * @see dma_tube_regs() + */ +typedef struct dma_tube_reg_map { + __io uint32 SCR; /**< Stream configuration register */ + __io uint32 SNDTR; /**< Stream number of data register */ + __io uint32 SPAR; /**< Stream peripheral address register */ + __io uint32 SM0AR; /**< Stream memory 0 address register */ + __io uint32 SM1AR; /**< Stream memory 1 address register */ + __io uint32 SFCR; /**< Stream FIFO control register */ +} dma_tube_reg_map; + +/** DMA1 stream 0 register map base pointer */ +#define DMA1S0_BASE ((struct dma_tube_reg_map*)0x40026010) +/** DMA1 stream 1 register map base pointer */ +#define DMA1S1_BASE ((struct dma_tube_reg_map*)0x40026028) +/** DMA1 stream 2 register map base pointer */ +#define DMA1S2_BASE ((struct dma_tube_reg_map*)0x40026040) +/** DMA1 stream 3 register map base pointer */ +#define DMA1S3_BASE ((struct dma_tube_reg_map*)0x40026058) +/** DMA1 stream 4 register map base pointer */ +#define DMA1S4_BASE ((struct dma_tube_reg_map*)0x40026070) +/** DMA1 stream 5 register map base pointer */ +#define DMA1S5_BASE ((struct dma_tube_reg_map*)0x40026088) +/** DMA1 stream 6 register map base pointer */ +#define DMA1S6_BASE ((struct dma_tube_reg_map*)0x400260A0) +/** DMA1 stream 7 register map base pointer */ +#define DMA1S7_BASE ((struct dma_tube_reg_map*)0x400260B8) + +/** DMA2 stream 0 register map base pointer */ +#define DMA2S0_BASE ((struct dma_tube_reg_map*)0x40026410) +/** DMA2 stream 1 register map base pointer */ +#define DMA2S1_BASE ((struct dma_tube_reg_map*)0x40026028) +/** DMA2 stream 2 register map base pointer */ +#define DMA2S2_BASE ((struct dma_tube_reg_map*)0x40026040) +/** DMA2 stream 3 register map base pointer */ +#define DMA2S3_BASE ((struct dma_tube_reg_map*)0x40026058) +/** DMA2 stream 4 register map base pointer */ +#define DMA2S4_BASE ((struct dma_tube_reg_map*)0x40026070) +/** DMA2 stream 5 register map base pointer */ +#define DMA2S5_BASE ((struct dma_tube_reg_map*)0x40026088) +/** DMA2 stream 6 register map base pointer */ +#define DMA2S6_BASE ((struct dma_tube_reg_map*)0x400260A0) +/** DMA2 stream 7 register map base pointer */ +#define DMA2S7_BASE ((struct dma_tube_reg_map*)0x400260B8) + +/* + * Register bit definitions + */ + +/* Low interrupt status register */ + +#define DMA_LISR_TCIF3_BIT 27 +#define DMA_LISR_HTIF3_BIT 26 +#define DMA_LISR_TEIF3_BIT 25 +#define DMA_LISR_DMEIF3_BIT 24 +#define DMA_LISR_FEIF3_BIT 22 +#define DMA_LISR_TCIF2_BIT 21 +#define DMA_LISR_HTIF2_BIT 20 +#define DMA_LISR_TEIF2_BIT 19 +#define DMA_LISR_DMEIF2_BIT 18 +#define DMA_LISR_FEIF2_BIT 16 +#define DMA_LISR_TCIF1_BIT 11 +#define DMA_LISR_HTIF1_BIT 10 +#define DMA_LISR_TEIF1_BIT 9 +#define DMA_LISR_DMEIF1_BIT 8 +#define DMA_LISR_FEIF1_BIT 6 +#define DMA_LISR_TCIF0_BIT 5 +#define DMA_LISR_HTIF0_BIT 4 +#define DMA_LISR_TEIF0_BIT 3 +#define DMA_LISR_DMEIF0_BIT 2 +#define DMA_LISR_FEIF0_BIT 0 + +#define DMA_LISR_TCIF3 (1U << DMA_LISR_TCIF3_BIT) +#define DMA_LISR_HTIF3 (1U << DMA_LISR_HTIF3_BIT) +#define DMA_LISR_TEIF3 (1U << DMA_LISR_TEIF3_BIT) +#define DMA_LISR_DMEIF3 (1U << DMA_LISR_DMEIF3_BIT) +#define DMA_LISR_FEIF3 (1U << DMA_LISR_FEIF3_BIT) +#define DMA_LISR_TCIF2 (1U << DMA_LISR_TCIF2_BIT) +#define DMA_LISR_HTIF2 (1U << DMA_LISR_HTIF2_BIT) +#define DMA_LISR_TEIF2 (1U << DMA_LISR_TEIF2_BIT) +#define DMA_LISR_DMEIF2 (1U << DMA_LISR_DMEIF2_BIT) +#define DMA_LISR_FEIF2 (1U << DMA_LISR_FEIF2_BIT) +#define DMA_LISR_TCIF1 (1U << DMA_LISR_TCIF1_BIT) +#define DMA_LISR_HTIF1 (1U << DMA_LISR_HTIF1_BIT) +#define DMA_LISR_TEIF1 (1U << DMA_LISR_TEIF1_BIT) +#define DMA_LISR_DMEIF1 (1U << DMA_LISR_DMEIF1_BIT) +#define DMA_LISR_FEIF1 (1U << DMA_LISR_FEIF1_BIT) +#define DMA_LISR_TCIF0 (1U << DMA_LISR_TCIF0_BIT) +#define DMA_LISR_HTIF0 (1U << DMA_LISR_HTIF0_BIT) +#define DMA_LISR_TEIF0 (1U << DMA_LISR_TEIF0_BIT) +#define DMA_LISR_DMEIF0 (1U << DMA_LISR_DMEIF0_BIT) +#define DMA_LISR_FEIF0 (1U << DMA_LISR_FEIF0_BIT) + +/* High interrupt status register */ + +#define DMA_HISR_TCIF7_BIT 27 +#define DMA_HISR_HTIF7_BIT 26 +#define DMA_HISR_TEIF7_BIT 25 +#define DMA_HISR_DMEIF7_BIT 24 +#define DMA_HISR_FEIF7_BIT 22 +#define DMA_HISR_TCIF6_BIT 21 +#define DMA_HISR_HTIF6_BIT 20 +#define DMA_HISR_TEIF6_BIT 19 +#define DMA_HISR_DMEIF6_BIT 18 +#define DMA_HISR_FEIF6_BIT 16 +#define DMA_HISR_TCIF5_BIT 11 +#define DMA_HISR_HTIF5_BIT 10 +#define DMA_HISR_TEIF5_BIT 9 +#define DMA_HISR_DMEIF5_BIT 8 +#define DMA_HISR_FEIF5_BIT 6 +#define DMA_HISR_TCIF4_BIT 5 +#define DMA_HISR_HTIF4_BIT 4 +#define DMA_HISR_TEIF4_BIT 3 +#define DMA_HISR_DMEIF4_BIT 2 +#define DMA_HISR_FEIF4_BIT 0 + +#define DMA_HISR_TCIF7 (1U << DMA_HISR_TCIF7_BIT) +#define DMA_HISR_HTIF7 (1U << DMA_HISR_HTIF7_BIT) +#define DMA_HISR_TEIF7 (1U << DMA_HISR_TEIF7_BIT) +#define DMA_HISR_DMEIF7 (1U << DMA_HISR_DMEIF7_BIT) +#define DMA_HISR_FEIF7 (1U << DMA_HISR_FEIF7_BIT) +#define DMA_HISR_TCIF6 (1U << DMA_HISR_TCIF6_BIT) +#define DMA_HISR_HTIF6 (1U << DMA_HISR_HTIF6_BIT) +#define DMA_HISR_TEIF6 (1U << DMA_HISR_TEIF6_BIT) +#define DMA_HISR_DMEIF6 (1U << DMA_HISR_DMEIF6_BIT) +#define DMA_HISR_FEIF6 (1U << DMA_HISR_FEIF6_BIT) +#define DMA_HISR_TCIF5 (1U << DMA_HISR_TCIF5_BIT) +#define DMA_HISR_HTIF5 (1U << DMA_HISR_HTIF5_BIT) +#define DMA_HISR_TEIF5 (1U << DMA_HISR_TEIF5_BIT) +#define DMA_HISR_DMEIF5 (1U << DMA_HISR_DMEIF5_BIT) +#define DMA_HISR_FEIF5 (1U << DMA_HISR_FEIF5_BIT) +#define DMA_HISR_TCIF4 (1U << DMA_HISR_TCIF4_BIT) +#define DMA_HISR_HTIF4 (1U << DMA_HISR_HTIF4_BIT) +#define DMA_HISR_TEIF4 (1U << DMA_HISR_TEIF4_BIT) +#define DMA_HISR_DMEIF4 (1U << DMA_HISR_DMEIF4_BIT) +#define DMA_HISR_FEIF4 (1U << DMA_HISR_FEIF4_BIT) + +/* Low interrupt flag clear register */ + +#define DMA_LIFCR_CTCIF3_BIT 27 +#define DMA_LIFCR_CHTIF3_BIT 26 +#define DMA_LIFCR_CTEIF3_BIT 25 +#define DMA_LIFCR_CDMEIF3_BIT 24 +#define DMA_LIFCR_CFEIF3_BIT 22 +#define DMA_LIFCR_CTCIF2_BIT 21 +#define DMA_LIFCR_CHTIF2_BIT 20 +#define DMA_LIFCR_CTEIF2_BIT 19 +#define DMA_LIFCR_CDMEIF2_BIT 18 +#define DMA_LIFCR_CFEIF2_BIT 16 +#define DMA_LIFCR_CTCIF1_BIT 11 +#define DMA_LIFCR_CHTIF1_BIT 10 +#define DMA_LIFCR_CTEIF1_BIT 9 +#define DMA_LIFCR_CDMEIF1_BIT 8 +#define DMA_LIFCR_CFEIF1_BIT 6 +#define DMA_LIFCR_CTCIF0_BIT 5 +#define DMA_LIFCR_CHTIF0_BIT 4 +#define DMA_LIFCR_CTEIF0_BIT 3 +#define DMA_LIFCR_CDMEIF0_BIT 2 +#define DMA_LIFCR_CFEIF0_BIT 0 + +#define DMA_LIFCR_CTCIF3 (1U << DMA_LIFCR_CTCIF3_BIT) +#define DMA_LIFCR_CHTIF3 (1U << DMA_LIFCR_CHTIF3_BIT) +#define DMA_LIFCR_CTEIF3 (1U << DMA_LIFCR_CTEIF3_BIT) +#define DMA_LIFCR_CDMEIF3 (1U << DMA_LIFCR_CDMEIF3_BIT) +#define DMA_LIFCR_CFEIF3 (1U << DMA_LIFCR_CFEIF3_BIT) +#define DMA_LIFCR_CTCIF2 (1U << DMA_LIFCR_CTCIF2_BIT) +#define DMA_LIFCR_CHTIF2 (1U << DMA_LIFCR_CHTIF2_BIT) +#define DMA_LIFCR_CTEIF2 (1U << DMA_LIFCR_CTEIF2_BIT) +#define DMA_LIFCR_CDMEIF2 (1U << DMA_LIFCR_CDMEIF2_BIT) +#define DMA_LIFCR_CFEIF2 (1U << DMA_LIFCR_CFEIF2_BIT) +#define DMA_LIFCR_CTCIF1 (1U << DMA_LIFCR_CTCIF1_BIT) +#define DMA_LIFCR_CHTIF1 (1U << DMA_LIFCR_CHTIF1_BIT) +#define DMA_LIFCR_CTEIF1 (1U << DMA_LIFCR_CTEIF1_BIT) +#define DMA_LIFCR_CDMEIF1 (1U << DMA_LIFCR_CDMEIF1_BIT) +#define DMA_LIFCR_CFEIF1 (1U << DMA_LIFCR_CFEIF1_BIT) +#define DMA_LIFCR_CTCIF0 (1U << DMA_LIFCR_CTCIF0_BIT) +#define DMA_LIFCR_CHTIF0 (1U << DMA_LIFCR_CHTIF0_BIT) +#define DMA_LIFCR_CTEIF0 (1U << DMA_LIFCR_CTEIF0_BIT) +#define DMA_LIFCR_CDMEIF0 (1U << DMA_LIFCR_CDMEIF0_BIT) +#define DMA_LIFCR_CFEIF0 (1U << DMA_LIFCR_CFEIF0_BIT) + +/* High interrupt flag clear regsister */ + +#define DMA_HIFCR_CTCIF7_BIT 27 +#define DMA_HIFCR_CHTIF7_BIT 26 +#define DMA_HIFCR_CTEIF7_BIT 25 +#define DMA_HIFCR_CDMEIF7_BIT 24 +#define DMA_HIFCR_CFEIF7_BIT 22 +#define DMA_HIFCR_CTCIF6_BIT 21 +#define DMA_HIFCR_CHTIF6_BIT 20 +#define DMA_HIFCR_CTEIF6_BIT 19 +#define DMA_HIFCR_CDMEIF6_BIT 18 +#define DMA_HIFCR_CFEIF6_BIT 16 +#define DMA_HIFCR_CTCIF5_BIT 11 +#define DMA_HIFCR_CHTIF5_BIT 10 +#define DMA_HIFCR_CTEIF5_BIT 9 +#define DMA_HIFCR_CDMEIF5_BIT 8 +#define DMA_HIFCR_CFEIF5_BIT 6 +#define DMA_HIFCR_CTCIF4_BIT 5 +#define DMA_HIFCR_CHTIF4_BIT 4 +#define DMA_HIFCR_CTEIF4_BIT 3 +#define DMA_HIFCR_CDMEIF4_BIT 2 +#define DMA_HIFCR_CFEIF4_BIT 0 + +#define DMA_HIFCR_CTCIF7 (1U << DMA_HIFCR_CTCIF7_BIT) +#define DMA_HIFCR_CHTIF7 (1U << DMA_HIFCR_CHTIF7_BIT) +#define DMA_HIFCR_CTEIF7 (1U << DMA_HIFCR_CTEIF7_BIT) +#define DMA_HIFCR_CDMEIF7 (1U << DMA_HIFCR_CDMEIF7_BIT) +#define DMA_HIFCR_CFEIF7 (1U << DMA_HIFCR_CFEIF7_BIT) +#define DMA_HIFCR_CTCIF6 (1U << DMA_HIFCR_CTCIF6_BIT) +#define DMA_HIFCR_CHTIF6 (1U << DMA_HIFCR_CHTIF6_BIT) +#define DMA_HIFCR_CTEIF6 (1U << DMA_HIFCR_CTEIF6_BIT) +#define DMA_HIFCR_CDMEIF6 (1U << DMA_HIFCR_CDMEIF6_BIT) +#define DMA_HIFCR_CFEIF6 (1U << DMA_HIFCR_CFEIF6_BIT) +#define DMA_HIFCR_CTCIF5 (1U << DMA_HIFCR_CTCIF5_BIT) +#define DMA_HIFCR_CHTIF5 (1U << DMA_HIFCR_CHTIF5_BIT) +#define DMA_HIFCR_CTEIF5 (1U << DMA_HIFCR_CTEIF5_BIT) +#define DMA_HIFCR_CDMEIF5 (1U << DMA_HIFCR_CDMEIF5_BIT) +#define DMA_HIFCR_CFEIF5 (1U << DMA_HIFCR_CFEIF5_BIT) +#define DMA_HIFCR_CTCIF4 (1U << DMA_HIFCR_CTCIF4_BIT) +#define DMA_HIFCR_CHTIF4 (1U << DMA_HIFCR_CHTIF4_BIT) +#define DMA_HIFCR_CTEIF4 (1U << DMA_HIFCR_CTEIF4_BIT) +#define DMA_HIFCR_CDMEIF4 (1U << DMA_HIFCR_CDMEIF4_BIT) +#define DMA_HIFCR_CFEIF4 (1U << DMA_HIFCR_CFEIF4_BIT) + +/* Stream configuration register */ + +#define DMA_SCR_CT_BIT 19 +#define DMA_SCR_DBM_BIT 18 +#define DMA_SCR_PINCOS_BIT 15 +#define DMA_SCR_MINC_BIT 10 +#define DMA_SCR_PINC_BIT 9 +#define DMA_SCR_CIRC_BIT 8 +#define DMA_SCR_PFCTRL_BIT 5 +#define DMA_SCR_TCIE_BIT 4 +#define DMA_SCR_HTIE_BIT 3 +#define DMA_SCR_TEIE_BIT 2 +#define DMA_SCR_DMEIE_BIT 1 +#define DMA_SCR_EN_BIT 0 + +#define DMA_SCR_CHSEL (0x7 << 25) +#define DMA_SCR_CHSEL_CH_0 (0x0 << 25) +#define DMA_SCR_CHSEL_CH_1 (0x1 << 25) +#define DMA_SCR_CHSEL_CH_2 (0x2 << 25) +#define DMA_SCR_CHSEL_CH_3 (0x3 << 25) +#define DMA_SCR_CHSEL_CH_4 (0x4 << 25) +#define DMA_SCR_CHSEL_CH_5 (0x5 << 25) +#define DMA_SCR_CHSEL_CH_6 (0x6 << 25) +#define DMA_SCR_CHSEL_CH_7 (0x7 << 25) +#define DMA_SCR_MBURST (0x3 << 23) +#define DMA_SCR_MBURST_SINGLE (0x0 << 23) +#define DMA_SCR_MBURST_INCR4 (0x1 << 23) +#define DMA_SCR_MBURST_INCR8 (0x2 << 23) +#define DMA_SCR_MBURST_INCR16 (0x3 << 23) +#define DMA_SCR_PBURST (0x3 << 21) +#define DMA_SCR_PBURST_SINGLE (0x0 << 21) +#define DMA_SCR_PBURST_INCR4 (0x1 << 21) +#define DMA_SCR_PBURST_INCR8 (0x2 << 21) +#define DMA_SCR_PBURST_INCR16 (0x3 << 21) +#define DMA_SCR_CT (1U << DMA_SCR_CT_BIT) +#define DMA_SCR_DBM (1U << DMA_SCR_DBM_BIT) +#define DMA_SCR_PL (0x3 << 16) +#define DMA_SCR_PL_LOW (0x0 << 16) +#define DMA_SCR_PL_MEDIUM (0x1 << 16) +#define DMA_SCR_PL_HIGH (0x2 << 16) +#define DMA_SCR_VERY_HIGH (0x3 << 16) +#define DMA_SCR_PINCOS (1U << DMA_SCR_PINCOS_BIT) +#define DMA_SCR_MSIZE (0x3 << 13) +#define DMA_SCR_MSIZE_8BITS (0x0 << 13) +#define DMA_SCR_MSIZE_16BITS (0x1 << 13) +#define DMA_SCR_MSIZE_32BITS (0x2 << 13) +#define DMA_SCR_PSIZE (0x3 << 11) +#define DMA_SCR_PSIZE_8BITS (0x0 << 11) +#define DMA_SCR_PSIZE_16BITS (0x1 << 11) +#define DMA_SCR_PSIZE_32BITS (0x2 << 11) +#define DMA_SCR_MINC (1U << DMA_SCR_MINC_BIT) +#define DMA_SCR_PINC (1U << DMA_SCR_PINC_BIT) +#define DMA_SCR_CIRC (1U << DMA_SCR_CIRC_BIT) +#define DMA_SCR_DIR (0x3 << 6) +#define DMA_SCR_DIR_PER_TO_MEM (0x0 << 6) +#define DMA_SCR_DIR_MEM_TO_PER (0x1 << 6) +#define DMA_SCR_DIR_MEM_TO_MEM (0x2 << 6) +#define DMA_SCR_PFCTRL (1U << DMA_SCR_PFCTRL_BIT) +#define DMA_SCR_TCIE (1U << DMA_SCR_TCIE_BIT) +#define DMA_SCR_HTIE (1U << DMA_SCR_HTIE_BIT) +#define DMA_SCR_TEIE (1U << DMA_SCR_TEIE_BIT) +#define DMA_SCR_DMEIE (1U << DMA_SCR_DMEIE_BIT) +#define DMA_SCR_EN (1U << DMA_SCR_EN_BIT) + +/* Stream FIFO control register */ + +#define DMA_SFCR_FEIE_BIT 7 +#define DMA_SFCR_DMDIS_BIT 2 + +#define DMA_SFCR_FEIE (1U << DMA_SFCR_FEIE_BIT) +#define DMA_SFCR_FS (0x7 << 3) +#define DMA_SFCR_FS_ZERO_TO_QUARTER (0x0 << 3) +#define DMA_SFCR_FS_QUARTER_TO_HALF (0x1 << 3) +#define DMA_SFCR_FS_HALF_TO_THREE_QUARTERS (0x2 << 3) +#define DMA_SFCR_FS_THREE_QUARTERS_TO_FULL (0x3 << 3) +#define DMA_SFCR_FS_EMPTY (0x4 << 3) +#define DMA_SFCR_FS_FULL (0x5 << 3) +#define DMA_SFCR_DMDIS (1U << DMA_SFCR_DMDIS_BIT) +#define DMA_SFCR_FTH (0x3 << 0) +#define DMA_SFCR_FTH_QUARTER_FULL (0x0 << 3) +#define DMA_SFCR_FTH_HALF_FULL (0x1 << 3) +#define DMA_SFCR_FTH_THREE_QUARTERS_FULL (0x2 << 3) +#define DMA_SFCR_FTH_FULL (0x3 << 3) + +/* + * Devices + */ + +extern dma_dev *DMA1; +extern dma_dev *DMA2; + +/* + * Other types needed by, or useful for, <libmaple/dma.h> + */ + +/** + * @brief DMA streams + * This is also the dma_tube type for STM32F2. + * @see dma_tube + */ +typedef enum dma_stream { + DMA_S0 = 0, + DMA_S1 = 1, + DMA_S2 = 2, + DMA_S3 = 3, + DMA_S4 = 4, + DMA_S5 = 5, + DMA_S6 = 6, + DMA_S7 = 7, +} dma_stream; + +/** STM32F2 dma_tube (=dma_stream) */ +#define dma_tube dma_stream + +/** + * @brief STM32F2 configuration flags for dma_tube_config. + * @see struct dma_tube_config + */ +typedef enum dma_cfg_flags { + /* NB: flags that aren't SCR bits are treated specially. */ + + /** + * Source address increment mode + * + * If this flag is set, the source address is incremented (by the + * source size) after each DMA transfer. + */ + DMA_CFG_SRC_INC = 1U << 31, + + /** + * Destination address increment mode + * + * If this flag is set, the destination address is incremented (by + * the destination size) after each DMA transfer. + */ + DMA_CFG_DST_INC = 1U << 30, + + /** + * Circular mode + * + * This mode is not available for memory-to-memory transfers. + */ + DMA_CFG_CIRC = DMA_SCR_CIRC, + + /** Transfer complete interrupt enable */ + DMA_CFG_CMPLT_IE = DMA_SCR_TCIE, + /** Transfer half-complete interrupt enable */ + DMA_CFG_HALF_CMPLT_IE = DMA_SCR_HTIE, + /** Transfer error interrupt enable */ + DMA_CFG_ERR_IE = DMA_SCR_TEIE, + /** Direct mode error interrupt enable */ + DMA_CFG_DM_ERR_IE = DMA_SCR_DMEIE, + /** FIFO error interrupt enable */ + DMA_CFG_FIFO_ERR_IE = (1U << 29), +} dma_cfg_flags; + +/** + * @brief STM32F2 DMA request sources. + * + * IMPORTANT: + * + * 1. On STM32F2, a particular dma_request_src is always tied to a + * single DMA controller, but often can be supported by multiple + * streams. For example, DMA requests from ADC1 (DMA_REQ_SRC_ADC1) can + * only be handled by DMA2, but they can go to either stream 0 or + * stream 4 (though not any other stream). If you try to use a request + * source with the wrong DMA controller or the wrong stream on + * STM32F2, dma_tube_cfg() will fail. + * + * 2. A single stream can only handle a single request source at a + * time. If you change a stream's request source later, it will stop + * serving requests from the old source. However, for some streams, + * some sources conflict with one another (when they correspond to the + * same channel on that stream), and on STM32F2, Terrible Super-Bad + * Things will happen if two conflicting request sources are active at + * the same time. + * + * @see struct dma_tube_config + * @see dma_tube_cfg() + */ +typedef enum dma_request_src { + /* These are constructed like so (though this may change, so user + * code shouldn't depend on it): + * + * Bits 0--2: Channel associated with request source + * + * Bits 3--9: rcc_clk_id of DMA controller associated with request source + * + * Bits 10--17: Bit mask of streams which can handle that request + * source. (E.g., bit 10 set means stream 0 can + * handle the source, bit 11 set means stream 1 can, + * etc.) + * + * Among other things, this is used for error checking in + * dma_tube_cfg(). If you change this bit encoding, you need to + * update the helper functions in stm32f2/dma.c. + */ +#define _DMA_STM32F2_REQ_SRC(stream_mask, clk_id, channel) \ + (((stream_mask) << 10) | ((clk_id) << 3) | (channel)) +#define _DMA_S(n) (1U << (n)) + + /* DMA1 request sources */ +#define _DMA_1_REQ_SRC(stream_mask, channel) \ + _DMA_STM32F2_REQ_SRC(stream_mask, RCC_DMA1, channel) + + /* Channel 0 */ + DMA_REQ_SRC_SPI3_RX = _DMA_1_REQ_SRC(_DMA_S(0) | _DMA_S(2), 0), + DMA_REQ_SRC_SPI2_RX = _DMA_1_REQ_SRC(_DMA_S(3), 0), + DMA_REQ_SRC_SPI2_TX = _DMA_1_REQ_SRC(_DMA_S(4), 0), + DMA_REQ_SRC_SPI3_TX = _DMA_1_REQ_SRC(_DMA_S(5) | _DMA_S(7), 0), + + /* Channel 1 */ + DMA_REQ_SRC_I2C1_RX = _DMA_1_REQ_SRC(_DMA_S(0) | _DMA_S(5), 1), + DMA_REQ_SRC_TIM7_UP = _DMA_1_REQ_SRC(_DMA_S(2) | _DMA_S(4), 1), + DMA_REQ_SRC_I2C1_TX = _DMA_1_REQ_SRC(_DMA_S(6) | _DMA_S(7), 1), + + /* Channel 2 */ + DMA_REQ_SRC_TIM4_CH1 = _DMA_1_REQ_SRC(_DMA_S(0), 2), + DMA_REQ_SRC_TIM4_CH2 = _DMA_1_REQ_SRC(_DMA_S(3), 2), + DMA_REQ_SRC_TIM4_UP = _DMA_1_REQ_SRC(_DMA_S(6), 2), + DMA_REQ_SRC_TIM4_CH3 = _DMA_1_REQ_SRC(_DMA_S(7), 2), + + /* Channel 3 */ + DMA_REQ_SRC_TIM2_UP = _DMA_1_REQ_SRC(_DMA_S(1) | _DMA_S(7), 3), + DMA_REQ_SRC_TIM2_CH3 = _DMA_1_REQ_SRC(_DMA_S(1), 3), + DMA_REQ_SRC_I2C3_RX = _DMA_1_REQ_SRC(_DMA_S(2), 3), + DMA_REQ_SRC_I2C3_TX = _DMA_1_REQ_SRC(_DMA_S(4), 3), + DMA_REQ_SRC_TIM2_CH1 = _DMA_1_REQ_SRC(_DMA_S(5), 3), + DMA_REQ_SRC_TIM2_CH2 = _DMA_1_REQ_SRC(_DMA_S(6), 3), + DMA_REQ_SRC_TIM2_CH4 = _DMA_1_REQ_SRC(_DMA_S(6) | _DMA_S(7), 3), + + /* Channel 4 */ + DMA_REQ_SRC_UART5_RX = _DMA_1_REQ_SRC(_DMA_S(0), 4), + DMA_REQ_SRC_USART3_RX = _DMA_1_REQ_SRC(_DMA_S(1), 4), + DMA_REQ_SRC_UART4_RX = _DMA_1_REQ_SRC(_DMA_S(2), 4), + DMA_REQ_SRC_USART3_TX = _DMA_1_REQ_SRC(_DMA_S(3), 4), + DMA_REQ_SRC_UART4_TX = _DMA_1_REQ_SRC(_DMA_S(4), 4), + DMA_REQ_SRC_USART2_RX = _DMA_1_REQ_SRC(_DMA_S(5), 4), + DMA_REQ_SRC_USART2_TX = _DMA_1_REQ_SRC(_DMA_S(6), 4), + DMA_REQ_SRC_UART5_TX = _DMA_1_REQ_SRC(_DMA_S(7), 4), + + /* Channel 5 */ + DMA_REQ_SRC_TIM3_CH4 = _DMA_1_REQ_SRC(_DMA_S(2), 5), + DMA_REQ_SRC_TIM3_UP = _DMA_1_REQ_SRC(_DMA_S(2), 5), + DMA_REQ_SRC_TIM3_CH1 = _DMA_1_REQ_SRC(_DMA_S(4), 5), + DMA_REQ_SRC_TIM3_TRIG = _DMA_1_REQ_SRC(_DMA_S(4), 5), + DMA_REQ_SRC_TIM3_CH2 = _DMA_1_REQ_SRC(_DMA_S(5), 5), + DMA_REQ_SRC_TIM3_CH3 = _DMA_1_REQ_SRC(_DMA_S(7), 5), + + /* Channel 6 */ + DMA_REQ_SRC_TIM5_CH3 = _DMA_1_REQ_SRC(_DMA_S(0), 6), + DMA_REQ_SRC_TIM5_UP = _DMA_1_REQ_SRC(_DMA_S(0) | _DMA_S(6), 6), + DMA_REQ_SRC_TIM5_CH4 = _DMA_1_REQ_SRC(_DMA_S(1) | _DMA_S(3), 6), + DMA_REQ_SRC_TIM5_TRIG = _DMA_1_REQ_SRC(_DMA_S(1) | _DMA_S(3), 6), + DMA_REQ_SRC_TIM5_CH1 = _DMA_1_REQ_SRC(_DMA_S(2), 6), + DMA_REQ_SRC_TIM5_CH2 = _DMA_1_REQ_SRC(_DMA_S(4), 6), + + /* Channel 7 */ + DMA_REQ_SRC_TIM6_UP = _DMA_1_REQ_SRC(_DMA_S(1), 7), + DMA_REQ_SRC_I2C2_RX = _DMA_1_REQ_SRC(_DMA_S(2) | _DMA_S(3), 7), + DMA_REQ_SRC_USART3_TX_ALTERNATE = _DMA_1_REQ_SRC(_DMA_S(4), 7), + DMA_REQ_SRC_DAC1 = _DMA_1_REQ_SRC(_DMA_S(5), 7), + DMA_REQ_SRC_DAC2 = _DMA_1_REQ_SRC(_DMA_S(6), 7), + DMA_REQ_SRC_I2C2_TX = _DMA_1_REQ_SRC(_DMA_S(7), 7), +#undef _DMA_1_REQ_SRC + + /* DMA2 request sources */ +#define _DMA_2_REQ_SRC(stream_mask, channel) \ + _DMA_STM32F2_REQ_SRC(stream_mask, RCC_DMA2, channel) + + /* Channel 0 */ + DMA_REQ_SRC_ADC1 = _DMA_2_REQ_SRC(_DMA_S(0) | _DMA_S(4), 0), + /* You can use these "DMA_REQ_SRC_TIMx_CHx_ALTERNATE" if you know + * what you're doing, but the other ones (for channels 6 and 7), + * are better, in that they don't conflict with one another. */ + DMA_REQ_SRC_TIM8_CH1_ALTERNATE = _DMA_2_REQ_SRC(_DMA_S(2), 0), + DMA_REQ_SRC_TIM8_CH2_ALTERNATE = _DMA_2_REQ_SRC(_DMA_S(2), 0), + DMA_REQ_SRC_TIM8_CH3_ALTERNATE = _DMA_2_REQ_SRC(_DMA_S(2), 0), + DMA_REQ_SRC_TIM1_CH1_ALTERNATE = _DMA_2_REQ_SRC(_DMA_S(6), 0), + DMA_REQ_SRC_TIM1_CH2_ALTERNATE = _DMA_2_REQ_SRC(_DMA_S(6), 0), + DMA_REQ_SRC_TIM1_CH3_ALTENRATE = _DMA_2_REQ_SRC(_DMA_S(6), 0), + + /* Channel 1 */ + DMA_REQ_SRC_DCMI = _DMA_2_REQ_SRC(_DMA_S(1) | _DMA_S(7), 1), + DMA_REQ_SRC_ADC2 = _DMA_2_REQ_SRC(_DMA_S(2) | _DMA_S(3), 1), + + /* Channel 2 */ + DMA_REQ_SRC_ADC3 = _DMA_2_REQ_SRC(_DMA_S(0) | _DMA_S(1), 2), + DMA_REQ_SRC_CRYP_OUT = _DMA_2_REQ_SRC(_DMA_S(5), 2), + DMA_REQ_SRC_CRYP_IN = _DMA_2_REQ_SRC(_DMA_S(6), 2), + DMA_REQ_SRC_HASH_IN = _DMA_2_REQ_SRC(_DMA_S(7), 2), + + /* Channel 3 */ + DMA_REQ_SRC_SPI1_RX = _DMA_2_REQ_SRC(_DMA_S(0) | _DMA_S(2), 3), + DMA_REQ_SRC_SPI1_TX = _DMA_2_REQ_SRC(_DMA_S(3) | _DMA_S(5), 3), + + /* Channel 4 */ + DMA_REQ_SRC_USART1_RX = _DMA_2_REQ_SRC(_DMA_S(2) | _DMA_S(5), 4), + DMA_REQ_SRC_SDIO = _DMA_2_REQ_SRC(_DMA_S(3) | _DMA_S(6), 4), + DMA_REQ_SRC_USART1_TX = _DMA_2_REQ_SRC(_DMA_S(7), 4), + + /* Channel 5 */ + DMA_REQ_SRC_USART6_RX = _DMA_2_REQ_SRC(_DMA_S(1) | _DMA_S(2), 5), + DMA_REQ_SRC_USART6_TX = _DMA_2_REQ_SRC(_DMA_S(6) | _DMA_S(7), 5), + + /* Channel 6 */ + DMA_REQ_SRC_TIM1_TRIG = _DMA_2_REQ_SRC(_DMA_S(0) | _DMA_S(4), 6), + DMA_REQ_SRC_TIM1_CH1 = _DMA_2_REQ_SRC(_DMA_S(1) | _DMA_S(3), 6), + DMA_REQ_SRC_TIM1_CH2 = _DMA_2_REQ_SRC(_DMA_S(3), 6), + DMA_REQ_SRC_TIM1_CH4 = _DMA_2_REQ_SRC(_DMA_S(4), 6), + DMA_REQ_SRC_TIM1_COM = _DMA_2_REQ_SRC(_DMA_S(4), 6), + DMA_REQ_SRC_TIM1_UP = _DMA_2_REQ_SRC(_DMA_S(5), 6), + DMA_REQ_SRC_TIM1_CH3 = _DMA_2_REQ_SRC(_DMA_S(6), 6), + + /* Channel 7 */ + DMA_REQ_SRC_TIM8_UP = _DMA_2_REQ_SRC(_DMA_S(1), 7), + DMA_REQ_SRC_TIM8_CH1 = _DMA_2_REQ_SRC(_DMA_S(2), 7), + DMA_REQ_SRC_TIM8_CH2 = _DMA_2_REQ_SRC(_DMA_S(3), 7), + DMA_REQ_SRC_TIM8_CH3 = _DMA_2_REQ_SRC(_DMA_S(4), 7), + DMA_REQ_SRC_TIM8_CH4 = _DMA_2_REQ_SRC(_DMA_S(7), 7), + DMA_REQ_SRC_TIM8_TRIG = _DMA_2_REQ_SRC(_DMA_S(7), 7), + DMA_REQ_SRC_TIM8_COM = _DMA_2_REQ_SRC(_DMA_S(7), 7), +#undef _DMA_2_REQ_SRC +#undef _DMA_S +} dma_request_src; + +/* + * Tube conveniences + */ + +static inline dma_tube_reg_map* dma_tube_regs(dma_dev *dev, + dma_tube tube) { + ASSERT(DMA_S0 <= tube && tube <= DMA_S7); + switch (dev->clk_id) { + case RCC_DMA1: + return DMA1S0_BASE + (int)tube; + case RCC_DMA2: + return DMA2S0_BASE + (int)tube; + default: + /* Can't happen */ + ASSERT(0); + return 0; + } +} + +static inline uint8 dma_is_enabled(dma_dev *dev, dma_tube tube) { + return dma_tube_regs(dev, tube)->SCR & DMA_SCR_EN; +} + +/* F2-only; available because of double-buffering. */ +void dma_set_mem_n_addr(dma_dev *dev, dma_tube tube, int n, + __io void *address); + +/** + * @brief Set memory 0 address. + * Availability: STM32F2. + * + * @param dev DMA device + * @param tube Tube whose memory 0 address to set + * @param addr Address to use as memory 0 + */ +static __always_inline void +dma_set_mem0_addr(dma_dev *dev, dma_tube tube, __io void *addr) { + dma_set_mem_n_addr(dev, tube, 0, addr); +} + +/** + * @brief Set memory 1 address. + * Availability: STM32F2. + * + * @param dev DMA device + * @param tube Tube whose memory 1 address to set + * @param addr Address to use as memory 1 + */ +static __always_inline void +dma_set_mem1_addr(dma_dev *dev, dma_tube tube, __io void *addr) { + dma_set_mem_n_addr(dev, tube, 1, addr); +} + +/* Assume the user means SM0AR in a non-double-buffered configuration. */ +static __always_inline void +dma_set_mem_addr(dma_dev *dev, dma_tube tube, __io void *addr) { + dma_set_mem0_addr(dev, tube, addr); +} + +/* SM0AR and SM1AR are treated as though they have the same size */ +static inline dma_xfer_size dma_get_mem_size(dma_dev *dev, dma_tube tube) { + return (dma_xfer_size)(dma_tube_regs(dev, tube)->SCR >> 13); +} + +static inline dma_xfer_size dma_get_per_size(dma_dev *dev, dma_tube tube) { + return (dma_xfer_size)(dma_tube_regs(dev, tube)->SCR >> 11); +} + +void dma_enable_fifo(dma_dev *dev, dma_tube tube); +void dma_disable_fifo(dma_dev *dev, dma_tube tube); + +static __always_inline int dma_is_fifo_enabled(dma_dev *dev, dma_tube tube) { + return dma_tube_regs(dev, tube)->SFCR & DMA_SFCR_DMDIS; +} + +/* + * TODO: + * - Double-buffer configuration function + * - FIFO configuration function + * - MBURST/PBURST configuration function + */ + +/* + * ISR/IFCR conveniences. + */ + +/* (undocumented) helper for reading LISR/HISR and writing + * LIFCR/HIFCR. For these registers, + * + * S0, S4: bits start at bit 0 + * S1, S5: 6 + * S2, S6: 16 + * S3, S7: 22 + * + * I can't imagine why ST didn't just use a byte for each group. The + * bits fit, and it would have made functions like these simpler and + * faster. Oh well. */ +static __always_inline uint32 _dma_sr_fcr_shift(dma_tube tube) { + switch (tube) { + case DMA_S0: /* fall through */ + case DMA_S4: + return 0; + case DMA_S1: /* fall through */ + case DMA_S5: + return 6; + case DMA_S2: /* fall through */ + case DMA_S6: + return 16; + case DMA_S3: /* fall through */ + case DMA_S7: + return 22; + } + /* Can't happen */ + ASSERT(0); + return 0; +} + +static inline uint8 dma_get_isr_bits(dma_dev *dev, dma_tube tube) { + dma_reg_map *regs = dev->regs; + __io uint32 *isr = tube > DMA_S3 ? ®s->HISR : ®s->LISR; + return (*isr >> _dma_sr_fcr_shift(tube)) & 0x3D; +} + +static inline void dma_clear_isr_bits(dma_dev *dev, dma_tube tube) { + dma_reg_map *regs = dev->regs; + __io uint32 *ifcr = tube > DMA_S3 ? ®s->HIFCR : ®s->LIFCR; + *ifcr = (0x3D << _dma_sr_fcr_shift(tube)); +} + +#undef _DMA_IRQ_BIT_SHIFT + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/exti.h b/libmaple/stm32f2/include/series/exti.h new file mode 100644 index 0000000..4643fcf --- /dev/null +++ b/libmaple/stm32f2/include/series/exti.h @@ -0,0 +1,46 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/exti.h + * @brief STM32F2 external interrupts + */ + +#ifndef _LIBMAPLE_STM32F2_EXTI_H_ +#define _LIBMAPLE_STM32F2_EXTI_H_ + +#ifdef __cpluspus +extern "C" { +#endif + +struct exti_reg_map; +#define EXTI_BASE ((struct exti_reg_map*)0x40013C00) + +#ifdef __cpluspus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/flash.h b/libmaple/stm32f2/include/series/flash.h new file mode 100644 index 0000000..a3c3933 --- /dev/null +++ b/libmaple/stm32f2/include/series/flash.h @@ -0,0 +1,202 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/flash.h + * @brief STM32F2 Flash header. + * + * Provides register map, base pointer, and register bit definitions + * for the Flash controller on the STM32F2 series, along with + * series-specific configuration values. + */ + +#ifndef _LIBMAPLE_STM32F2_FLASH_H_ +#define _LIBMAPLE_STM32F2_FLASH_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * Register map + */ + +/** @brief STM32F2 Flash register map type */ +typedef struct flash_reg_map { + __io uint32 ACR; /**< Access control register */ + __io uint32 KEYR; /**< Key register */ + __io uint32 OPTKEYR; /**< Option key register */ + __io uint32 SR; /**< Status register */ + __io uint32 CR; /**< Control register */ + __io uint32 OPTCR; /**< Option control register */ +} flash_reg_map; + +#define FLASH_BASE ((struct flash_reg_map*)0x40023C00) + +/* + * Register bit definitions + */ + +/* Access control register */ + +#define FLASH_ACR_DCRST_BIT 12 +#define FLASH_ACR_ICRST_BIT 11 +#define FLASH_ACR_DCEN_BIT 10 +#define FLASH_ACR_ICEN_BIT 9 +#define FLASH_ACR_PRFTEN_BIT 8 + +#define FLASH_ACR_DCRST (1U << FLASH_ACR_DCRST_BIT) +#define FLASH_ACR_ICRST (1U << FLASH_ACR_ICRST_BIT) +#define FLASH_ACR_DCEN (1U << FLASH_ACR_DCEN_BIT) +#define FLASH_ACR_ICEN (1U << FLASH_ACR_ICEN_BIT) +#define FLASH_ACR_PRFTEN (1U << FLASH_ACR_PRFTEN_BIT) +#define FLASH_ACR_LATENCY 0x7 +#define FLASH_ACR_LATENCY_0WS 0x0 +#define FLASH_ACR_LATENCY_1WS 0x1 +#define FLASH_ACR_LATENCY_2WS 0x2 +#define FLASH_ACR_LATENCY_3WS 0x3 +#define FLASH_ACR_LATENCY_4WS 0x4 +#define FLASH_ACR_LATENCY_5WS 0x5 +#define FLASH_ACR_LATENCY_6WS 0x6 +#define FLASH_ACR_LATENCY_7WS 0x7 + +/* Key register */ + +#define FLASH_KEYR_KEY1 0x45670123 +#define FLASH_KEYR_KEY2 0xCDEF89AB + +/* Option key register */ + +#define FLASH_OPTKEYR_OPTKEY1 0x08192A3B +#define FLASH_OPTKEYR_OPTKEY2 0x4C5D6E7F + +/* Status register */ + +#define FLASH_SR_BSY_BIT 16 +#define FLASH_SR_PGSERR_BIT 7 +#define FLASH_SR_PGPERR_BIT 6 +#define FLASH_SR_PGAERR_BIT 5 +#define FLASH_SR_WRPERR_BIT 4 +#define FLASH_SR_OPERR_BIT 1 +#define FLASH_SR_EOP_BIT 0 + +#define FLASH_SR_BSY (1U << FLASH_SR_BSY_BIT) +#define FLASH_SR_PGSERR (1U << FLASH_SR_PGSERR_BIT) +#define FLASH_SR_PGPERR (1U << FLASH_SR_PGPERR_BIT) +#define FLASH_SR_PGAERR (1U << FLASH_SR_PGAERR_BIT) +#define FLASH_SR_WRPERR (1U << FLASH_SR_WRPERR_BIT) +#define FLASH_SR_OPERR (1U << FLASH_SR_OPERR_BIT) +#define FLASH_SR_EOP (1U << FLASH_SR_EOP_BIT) + +/* Control register */ + +#define FLASH_CR_LOCK_BIT 31 +#define FLASH_CR_ERRIE_BIT 25 +#define FLASH_CR_EOPIE_BIT 24 +#define FLASH_CR_STRT_BIT 16 +#define FLASH_CR_MER_BIT 2 +#define FLASH_CR_SER_BIT 1 +#define FLASH_CR_PG_BIT 0 + +#define FLASH_CR_LOCK (1U << FLASH_CR_LOCK_BIT) +#define FLASH_CR_ERRIE (1U << FLASH_CR_ERRIE_BIT) +#define FLASH_CR_EOPIE (1U << FLASH_CR_EOPIE_BIT) +#define FLASH_CR_STRT (1U << FLASH_CR_STRT_BIT) + +#define FLASH_CR_PSIZE (0x3 << 8) +#define FLASH_CR_PSIZE_MUL8 (0x0 << 8) +#define FLASH_CR_PSIZE_MUL16 (0x1 << 8) +#define FLASH_CR_PSIZE_MUL32 (0x2 << 8) +#define FLASH_CR_PSIZE_MUL64 (0x3 << 8) + +#define FLASH_CR_SNB (0xF << 3) +#define FLASH_CR_SNB_0 (0x0 << 3) +#define FLASH_CR_SNB_1 (0x1 << 3) +#define FLASH_CR_SNB_2 (0x2 << 3) +#define FLASH_CR_SNB_3 (0x3 << 3) +#define FLASH_CR_SNB_4 (0x4 << 3) +#define FLASH_CR_SNB_5 (0x5 << 3) +#define FLASH_CR_SNB_6 (0x6 << 3) +#define FLASH_CR_SNB_7 (0x7 << 3) +#define FLASH_CR_SNB_8 (0x8 << 3) +#define FLASH_CR_SNB_9 (0x9 << 3) +#define FLASH_CR_SNB_10 (0xA << 3) +#define FLASH_CR_SNB_11 (0xB << 3) + +#define FLASH_CR_MER (1U << FLASH_CR_MER_BIT) +#define FLASH_CR_SER (1U << FLASH_CR_SER_BIT) +#define FLASH_CR_PG (1U << FLASH_CR_PG_BIT) + +/* Option control register */ + +#define FLASH_OPTCR_NRST_STDBY_BIT 7 +#define FLASH_OPTCR_NRST_STOP_BIT 6 +#define FLASH_OPTCR_WDG_SW_BIT 5 +#define FLASH_OPTCR_OPTSTRT_BIT 1 +#define FLASH_OPTCR_OPTLOCK_BIT 0 + +#define FLASH_OPTCR_NWRP (0x3FF << 16) + +/* Excluded: The many level 1 values */ +#define FLASH_OPTCR_RDP (0xFF << 8) +#define FLASH_OPTCR_RDP_LEVEL0 (0xAA << 8) +#define FLASH_OPTCR_RDP_LEVEL2 (0xCC << 8) + +#define FLASH_OPTCR_USER (0x7 << 5) +#define FLASH_OPTCR_nRST_STDBY (1U << FLASH_OPTCR_nRST_STDBY_BIT) +#define FLASH_OPTCR_nRST_STOP (1U << FLASH_OPTCR_nRST_STOP_BIT) +#define FLASH_OPTCR_WDG_SW (1U << FLASH_OPTCR_WDG_SW_BIT) + +#define FLASH_OPTCR_BOR_LEV (0x3 << 2) +#define FLASH_OPTCR_BOR_LEVEL3 (0x0 << 2) +#define FLASH_OPTCR_BOR_LEVEL2 (0x1 << 2) +#define FLASH_OPTCR_BOR_LEVEL1 (0x2 << 2) +#define FLASH_OPTCR_BOR_OFF (0x3 << 2) + +#define FLASH_OPTCR_OPTSTRT (1U << FLASH_OPTCR_OPTSTRT_BIT) +#define FLASH_OPTCR_OPTLOCK (1U << FLASH_OPTCR_OPTLOCK_BIT) + +/* + * Series-specific configuration values + */ + +/* Note that this value depends on a 2.7V--3.6V supply voltage */ +#define FLASH_SAFE_WAIT_STATES FLASH_WAIT_STATE_3 + +/* Flash memory features available via ACR. */ +enum { + FLASH_PREFETCH = 0x100, + FLASH_ICACHE = 0x200, + FLASH_DCACHE = 0x400, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/gpio.h b/libmaple/stm32f2/include/series/gpio.h new file mode 100644 index 0000000..1496e8e --- /dev/null +++ b/libmaple/stm32f2/include/series/gpio.h @@ -0,0 +1,264 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011, 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/gpio.h + * @brief STM32F2 GPIO support. + */ + +#ifndef _LIBMAPLE_STM32F2_GPIO_H_ +#define _LIBMAPLE_STM32F2_GPIO_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * GPIO register maps and devices + */ + +/** GPIO register map type */ +typedef struct gpio_reg_map { + __io uint32 MODER; /**< Mode register */ + __io uint32 OTYPER; /**< Output type register */ + __io uint32 OSPEEDR; /**< Output speed register */ + __io uint32 PUPDR; /**< Pull-up/pull-down register */ + __io uint32 IDR; /**< Input data register */ + __io uint32 ODR; /**< Output data register */ + __io uint32 BSRR; /**< Bit set/reset register */ + __io uint32 LCKR; /**< Configuration lock register */ + __io uint32 AFRL; /**< Alternate function low register */ + __io uint32 AFRH; /**< Alternate function high register */ +} gpio_reg_map; + +/** GPIO port A register map base pointer */ +#define GPIOA_BASE ((struct gpio_reg_map*)0x40020000) +/** GPIO port B register map base pointer */ +#define GPIOB_BASE ((struct gpio_reg_map*)0x40020400) +/** GPIO port C register map base pointer */ +#define GPIOC_BASE ((struct gpio_reg_map*)0x40020800) +/** GPIO port D register map base pointer */ +#define GPIOD_BASE ((struct gpio_reg_map*)0x40020C00) +/** GPIO port E register map base pointer */ +#define GPIOE_BASE ((struct gpio_reg_map*)0x40021000) +/** GPIO port F register map base pointer */ +#define GPIOF_BASE ((struct gpio_reg_map*)0x40021400) +/** GPIO port G register map base pointer */ +#define GPIOG_BASE ((struct gpio_reg_map*)0x40021800) +/** GPIO port H register map base pointer */ +#define GPIOH_BASE ((struct gpio_reg_map*)0x40021C00) +/** GPIO port I register map base pointer */ +#define GPIOI_BASE ((struct gpio_reg_map*)0x40022000) + +struct gpio_dev; +extern struct gpio_dev* const GPIOA; +extern struct gpio_dev gpioa; +extern struct gpio_dev* const GPIOB; +extern struct gpio_dev gpiob; +extern struct gpio_dev* const GPIOC; +extern struct gpio_dev gpioc; +extern struct gpio_dev* const GPIOD; +extern struct gpio_dev gpiod; +extern struct gpio_dev* const GPIOE; +extern struct gpio_dev gpioe; +extern struct gpio_dev* const GPIOF; +extern struct gpio_dev gpiof; +extern struct gpio_dev* const GPIOG; +extern struct gpio_dev gpiog; +extern struct gpio_dev* const GPIOH; +extern struct gpio_dev gpioh; +extern struct gpio_dev* const GPIOI; +extern struct gpio_dev gpioi; + +/* + * Register bit definitions + * + * Currently, we only provide masks to be used for shifting for some + * registers, rather than repeating the same values 16 times. + */ + +/* Mode register */ + +#define GPIO_MODER_INPUT 0x0 +#define GPIO_MODER_OUTPUT 0x1 +#define GPIO_MODER_AF 0x2 +#define GPIO_MODER_ANALOG 0x3 + +/* Output type register */ + +#define GPIO_OTYPER_PP 0x0 +#define GPIO_OTYPER_OD 0x1 + +/* Output speed register */ + +#define GPIO_OSPEEDR_LOW 0x0 +#define GPIO_OSPEEDR_MED 0x1 +#define GPIO_OSPEEDR_FAST 0x2 +#define GPIO_OSPEEDR_HIGH 0x3 + +/* Pull-up/pull-down register */ + +#define GPIO_PUPDR_NOPUPD 0x0 +#define GPIO_PUPDR_PU 0x1 +#define GPIO_PUPDR_PD 0x2 + +/* Alternate function register low */ + +#define GPIO_AFRL_AF0 (0xFU << 0) +#define GPIO_AFRL_AF1 (0xFU << 4) +#define GPIO_AFRL_AF2 (0xFU << 8) +#define GPIO_AFRL_AF3 (0xFU << 12) +#define GPIO_AFRL_AF4 (0xFU << 16) +#define GPIO_AFRL_AF5 (0xFU << 20) +#define GPIO_AFRL_AF6 (0xFU << 24) +#define GPIO_AFRL_AF7 (0xFU << 28) + +/* Alternate function register high */ + +#define GPIO_AFRH_AF8 (0xFU << 0) +#define GPIO_AFRH_AF9 (0xFU << 4) +#define GPIO_AFRH_AF10 (0xFU << 8) +#define GPIO_AFRH_AF11 (0xFU << 12) +#define GPIO_AFRH_AF12 (0xFU << 16) +#define GPIO_AFRH_AF13 (0xFU << 20) +#define GPIO_AFRH_AF14 (0xFU << 24) +#define GPIO_AFRH_AF15 (0xFU << 28) + +/* + * GPIO routines + */ + +/** + * @brief GPIO pin modes + */ +typedef enum gpio_pin_mode { + GPIO_MODE_INPUT = GPIO_MODER_INPUT, /**< Input mode */ + GPIO_MODE_OUTPUT = GPIO_MODER_OUTPUT, /**< Output mode */ + GPIO_MODE_AF = GPIO_MODER_AF, /**< Alternate function mode */ + GPIO_MODE_ANALOG = GPIO_MODER_ANALOG, /**< Analog mode */ +} gpio_pin_mode; + +/** + * @brief Additional flags to be used when setting a pin's mode. + * + * Beyond the basic modes (input, general purpose output, alternate + * function, and analog), there are three parameters that can affect a + * pin's mode: + * + * 1. Output type: push/pull or open-drain. This only has an effect + * for output modes. Choices are: GPIO_MODEF_TYPE_PP (the default) + * and GPIO_MODEF_TYPE_OD. + * + * 2. Output speed: specifies the frequency at which a pin changes + * state. This only has an effect for output modes. Choices are: + * GPIO_MODEF_SPEED_LOW (default), GPIO_MODEF_SPEED_MED, + * GPIO_MODEF_SPEED_FAST, and GPIO_MODEF_SPEED_HIGH. + * + * 3. Push/pull setting: All GPIO pins have weak pull-up and pull-down + * resistors that can be enabled when the pin's mode is + * set. Choices are: GPIO_MODEF_PUPD_NONE (default), + * GPIO_MODEF_PUPD_PU, and GPIO_MODEF_PUPD_PD. + */ +typedef enum gpio_mode_flags { + /* Output type in bit 0 */ + GPIO_MODEF_TYPE_PP = GPIO_OTYPER_PP, /**< Output push/pull (default). + Applies only when the mode + specifies output. */ + GPIO_MODEF_TYPE_OD = GPIO_OTYPER_OD, /**< Output open drain. + Applies only when the mode + specifies output. */ + + /* Speed in bits 2:1 */ + GPIO_MODEF_SPEED_LOW = GPIO_OSPEEDR_LOW << 1, /**< Low speed (default): + 2 MHz. */ + GPIO_MODEF_SPEED_MED = GPIO_OSPEEDR_MED << 1, /**< Medium speed: 25 MHz. */ + GPIO_MODEF_SPEED_FAST = GPIO_OSPEEDR_FAST << 1, /**< Fast speed: 50 MHz. */ + GPIO_MODEF_SPEED_HIGH = GPIO_OSPEEDR_HIGH << 1, /**< High speed: + 100 MHz on 30 pF, + 80 MHz on 15 pF. */ + + /* Pull-up/pull-down in bits 4:3 */ + GPIO_MODEF_PUPD_NONE = GPIO_PUPDR_NOPUPD << 3, /**< No pull-up/pull-down + (default). */ + GPIO_MODEF_PUPD_PU = GPIO_PUPDR_PU << 3, /**< Pull-up */ + GPIO_MODEF_PUPD_PD = GPIO_PUPDR_PD << 3, /**< Pull-down */ +} gpio_mode_flags; + +void gpio_set_modef(struct gpio_dev *dev, + uint8 bit, + gpio_pin_mode mode, + unsigned flags); + +/** + * @brief Set the mode of a GPIO pin. + * + * Calling this function is equivalent to calling gpio_set_modef(dev, + * pin, mode, GPIO_MODE_SPEED_HIGH). Note that this overrides the + * default speed. + * + * @param dev GPIO device. + * @param pin Pin on the device whose mode to set, 0--15. + * @param mode Mode to set the pin to. + */ +static inline void gpio_set_mode(struct gpio_dev *dev, + uint8 bit, + gpio_pin_mode mode) { + gpio_set_modef(dev, bit, mode, GPIO_MODEF_SPEED_HIGH); +} + +/** + * @brief GPIO alternate functions. + * Use these to select an alternate function for a pin. + * @see gpio_set_af() + */ +typedef enum gpio_af { + GPIO_AF_SYS = 0, /**< System. */ + GPIO_AF_TIM_1_2 = 1, /**< Timers 1 and 2. */ + GPIO_AF_TIM_3_4_5 = 2, /**< Timers 3, 4, and 5. */ + GPIO_AF_TIM_8_9_10_11 = 3, /**< Timers 8 through 11. */ + GPIO_AF_I2C = 4, /**< I2C 1, 2, and 3. */ + GPIO_AF_SPI_1_2 = 5, /**< SPI1, SPI2/I2S2. */ + GPIO_AF_SPI3 = 6, /**< SPI3/I2S3. */ + GPIO_AF_USART_1_2_3 = 7, /**< USART 1, 2, and 3. */ + GPIO_AF_USART_4_5_6 = 8, /**< UART 4 and 5, USART 6. */ + GPIO_AF_CAN_1_2_TIM_12_13_14 = 9, /**< + * CAN 1 and 2, timers 12, 13, and 14. */ + GPIO_AF_USB_OTG_FS_HS = 10, /**< USB OTG HS and FS. */ + GPIO_AF_ETH = 11, /**< Ethernet MII and RMII. */ + GPIO_AF_FSMC_SDIO_OTG_FS = 12, /**< FSMC, SDIO, and USB OTG FS. */ + GPIO_AF_DCMI = 13, /**< DCMI. */ + GPIO_AF_EVENTOUT = 15, /**< EVENTOUT. */ +} gpio_af; + +void gpio_set_af(struct gpio_dev *dev, uint8 bit, gpio_af af); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/nvic.h b/libmaple/stm32f2/include/series/nvic.h new file mode 100644 index 0000000..dc03806 --- /dev/null +++ b/libmaple/stm32f2/include/series/nvic.h @@ -0,0 +1,160 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/nvic.h + * @brief STM32F2 nested vectored interrupt controller (NVIC) header. + */ + +#ifndef _LIBMAPLE_STM32F2_NVIC_H_ +#define _LIBMAPLE_STM32F2_NVIC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +/** + * @brief STM32F2 interrupt vector table interrupt numbers. + */ +typedef enum nvic_irq_num { + NVIC_NMI = -14, /**< Non-maskable interrupt */ + NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ + NVIC_MEM_MANAGE = -12, /**< Memory management */ + NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory + access fault. */ + NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction + or illegal state. */ + NVIC_SVC = -5, /**< System service call via SWI + instruction */ + NVIC_DEBUG_MON = -4, /**< Debug monitor */ + NVIC_PEND_SVC = -2, /**< Pendable request for system + service */ + NVIC_SYSTICK = -1, /**< System tick timer */ + NVIC_WWDG = 0, /**< Window watchdog interrupt */ + NVIC_PVD = 1, /**< PVD through EXTI line detection */ + NVIC_TAMP_STAMP = 2, /**< Tamper and TimeStamp */ + NVIC_RTC_WKUP = 3, /**< Real-time clock wakeup */ + NVIC_FLASH = 4, /**< Flash */ + NVIC_RCC = 5, /**< Reset and clock control */ + NVIC_EXTI0 = 6, /**< EXTI line 0 */ + NVIC_EXTI1 = 7, /**< EXTI line 1 */ + NVIC_EXTI2 = 8, /**< EXTI line 2 */ + NVIC_EXTI3 = 9, /**< EXTI line 3 */ + NVIC_EXTI4 = 10, /**< EXTI line 4 */ + NVIC_DMA1_STREAM0 = 11, /**< DMA1 stream 0 */ + NVIC_DMA1_STREAM1 = 12, /**< DMA1 stream 1 */ + NVIC_DMA1_STREAM2 = 13, /**< DMA1 stream 2 */ + NVIC_DMA1_STREAM3 = 14, /**< DMA1 stream 3 */ + NVIC_DMA1_STREAM4 = 15, /**< DMA1 stream 4 */ + NVIC_DMA1_STREAM5 = 16, /**< DMA1 stream 5 */ + NVIC_DMA1_STREAM6 = 17, /**< DMA1 stream 6 */ + NVIC_ADC = 18, /**< ADC */ + NVIC_CAN1_TX = 19, /**< CAN1 TX */ + NVIC_CAN1_RX0 = 20, /**< CAN1 RX0 */ + NVIC_CAN1_RX1 = 21, /**< CAN1 RX1 */ + NVIC_CAN1_SCE = 22, /**< CAN1 SCE */ + NVIC_EXTI_9_5 = 23, /**< EXTI lines [9:5] */ + NVIC_TIMER1_BRK_TIMER9 = 24, /**< Timer 1 break and timer 9 */ + NVIC_TIMER1_UP_TIMER10 = 25, /**< Timer 1 update and timer 10 */ + NVIC_TIMER1_TRG_COM_TIMER11 = 26, /**< Timer 1 trigger and commutation and + timer 11.*/ + NVIC_TIMER1_CC = 27, /**< Timer 1 capture and compare */ + NVIC_TIMER2 = 28, /**< Timer 2 */ + NVIC_TIMER3 = 29, /**< Timer 3 */ + NVIC_TIMER4 = 30, /**< Timer 4 */ + NVIC_I2C1_EV = 31, /**< I2C1 event */ + NVIC_I2C1_ER = 32, /**< I2C2 error */ + NVIC_I2C2_EV = 33, /**< I2C2 event */ + NVIC_I2C2_ER = 34, /**< I2C2 error */ + NVIC_SPI1 = 35, /**< SPI1 */ + NVIC_SPI2 = 36, /**< SPI2 */ + NVIC_USART1 = 37, /**< USART1 */ + NVIC_USART2 = 38, /**< USART2 */ + NVIC_USART3 = 39, /**< USART3 */ + NVIC_EXTI_15_10 = 40, /**< EXTI lines [15:10] */ + NVIC_RTCALARM = 41, /**< RTC alarms A and B through EXTI */ + NVIC_OTG_FS_WKUP = 42, /**< USB on-the-go full-speed wakeup + through EXTI*/ + NVIC_TIMER8_BRK_TIMER12 = 43, /**< Timer 8 break and timer 12 */ + NVIC_TIMER8_UP_TIMER13 = 44, /**< Timer 8 update and timer 13 */ + NVIC_TIMER8_TRG_COM_TIMER14 = 45, /**< Timer 8 trigger and commutation and + timer 14 */ + NVIC_TIMER8_CC = 46, /**< Timer 8 capture and compare */ + NVIC_DMA1_STREAM7 = 47, /**< DMA1 stream 7 */ + NVIC_FSMC = 48, /**< FSMC */ + NVIC_SDIO = 49, /**< SDIO */ + NVIC_TIMER5 = 50, /**< Timer 5 */ + NVIC_SPI3 = 51, /**< SPI3 */ + NVIC_UART4 = 52, /**< UART4 */ + NVIC_UART5 = 53, /**< UART5 */ + NVIC_TIMER6_DAC = 54, /**< Timer 6 and DAC underrun */ + NVIC_TIMER7 = 55, /**< Timer 7 */ + NVIC_DMA2_STREAM0 = 56, /**< DMA2 stream 0 */ + NVIC_DMA2_STREAM1 = 57, /**< DMA2 stream 1 */ + NVIC_DMA2_STREAM2 = 58, /**< DMA2 stream 2 */ + NVIC_DMA2_STREAM3 = 59, /**< DMA2 stream 3 */ + NVIC_DMA2_STREAM4 = 60, /**< DMA2 stream 4 */ + NVIC_ETH = 61, /**< Ethernet */ + NVIC_ETH_WKUP = 62, /**< Ethernet wakeup through EXTI */ + NVIC_CAN2_TX = 63, /**< CAN2 TX */ + NVIC_CAN2_RX0 = 64, /**< CAN2 RX0 */ + NVIC_CAN2_RX1 = 65, /**< CAN2 RX1 */ + NVIC_CAN2_SCE = 66, /**< CAN2 SCE */ + NVIC_OTG_FS = 67, /**< USB on-the-go full-speed */ + NVIC_DMA2_STREAM5 = 68, /**< DMA2 stream 5 */ + NVIC_DMA2_STREAM6 = 69, /**< DMA2 stream 6 */ + NVIC_DMA2_STREAM7 = 70, /**< DMA2 stream 7 */ + NVIC_USART6 = 71, /**< USART6 */ + NVIC_I2C3_EV = 72, /**< I2C3 event */ + NVIC_I2C3_ER = 73, /**< I2C3 error */ + NVIC_OTG_HS_EP1_OUT = 74, /**< USB on-the-go high-speed + endpoint 1 OUT */ + NVIC_OTG_HS_EP1_IN = 75, /**< USB on-the-go high-speed + endpoint 1 IN */ + NVIC_OTG_HS_WKUP = 76, /**< USB on-the-go high-speed wakeup + through EXTI*/ + NVIC_OTG_HS = 77, /**< USB on-the-go high-speed */ + NVIC_DCMI = 78, /**< DCMI */ + NVIC_CRYP = 79, /**< Cryptographic processor */ + NVIC_HASH_RNG = 80, /**< Hash and random number + generation */ + + /* Fake enumerator values, for compatiblity with F1. + * TODO decide if this is actually a good idea. */ + NVIC_TIMER6 = NVIC_TIMER6_DAC, /**< For compatibility with STM32F1. */ +} nvic_irq_num; + +static inline void nvic_irq_disable_all(void) { + NVIC_BASE->ICER[0] = 0xFFFFFFFF; + NVIC_BASE->ICER[1] = 0xFFFFFFFF; + NVIC_BASE->ICER[2] = 0xFFFFFFFF; +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/pwr.h b/libmaple/stm32f2/include/series/pwr.h new file mode 100644 index 0000000..96353a4 --- /dev/null +++ b/libmaple/stm32f2/include/series/pwr.h @@ -0,0 +1,73 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/pwr.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 Power control (PWR) support. + */ + +#ifndef _LIBMAPLE_STM32F2_PWR_H_ +#define _LIBMAPLE_STM32F2_PWR_H_ + +/* + * Additional register bits + */ + +/* Control register */ + +/** + * @brief Flash power down in stop mode bit. + * Availability: STM32F2 */ +#define PWR_CR_FPDS_BIT 9 +/** + * @brief Flash power down in stop mode. + * Availability: STM32F2 */ +#define PWR_CR_FPDS (1U << PWR_CR_FPDS_BIT) + +/* PVD level selection */ +#define PWR_CR_PLS_2_0V (0x0 << 5) +#define PWR_CR_PLS_2_1V (0x1 << 5) +#define PWR_CR_PLS_2_3V (0x2 << 5) +#define PWR_CR_PLS_2_5V (0x3 << 5) +#define PWR_CR_PLS_2_6V (0x4 << 5) +#define PWR_CR_PLS_2_7V (0x5 << 5) +#define PWR_CR_PLS_2_8V (0x6 << 5) +#define PWR_CR_PLS_2_9V (0x7 << 5) + +/* Control/Status register */ + +/** Backup regulator enable bit. */ +#define PWR_CSR_BRE_BIT 9 +/** Backup regulator ready bit. */ +#define PWR_CSR_BRR_BIT 3 + +/** Backup regulator enable. */ +#define PWR_CSR_BRE (1U << PWR_CSR_BRE_BIT) +/** Backup regulator ready. */ +#define PWR_CSR_BRR (1U << PWR_CSR_BRR_BIT) + +#endif diff --git a/libmaple/stm32f2/include/series/rcc.h b/libmaple/stm32f2/include/series/rcc.h new file mode 100644 index 0000000..441a5a8 --- /dev/null +++ b/libmaple/stm32f2/include/series/rcc.h @@ -0,0 +1,951 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/rcc.h + * @brief STM32F2 reset and clock control (RCC) support. + */ + +#ifndef _LIBMAPLE_STM32F2_RCC_H_ +#define _LIBMAPLE_STM32F2_RCC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * Register map + */ + +/** STM32F2 RCC register map type */ +typedef struct rcc_reg_map { + __io uint32 CR; /**< Clock control register */ + __io uint32 PLLCFGR; /**< PLL configuration register */ + __io uint32 CFGR; /**< Clock configuration register */ + __io uint32 CIR; /**< Clock interrupt register */ + __io uint32 AHB1RSTR; /**< AHB1 peripheral reset register */ + __io uint32 AHB2RSTR; /**< AHB2 peripheral reset register */ + __io uint32 AHB3RSTR; /**< AHB3 peripheral reset register */ + const uint32 RESERVED1; /**< Reserved */ + __io uint32 APB1RSTR; /**< APB1 peripheral reset register */ + __io uint32 APB2RSTR; /**< APB2 peripheral reset register */ + const uint32 RESERVED2; /**< Reserved */ + const uint32 RESERVED3; /**< Reserved */ + __io uint32 AHB1ENR; /**< AHB1 peripheral clock enable register */ + __io uint32 AHB2ENR; /**< AHB2 peripheral clock enable register */ + __io uint32 AHB3ENR; /**< AHB3 peripheral clock enable register */ + const uint32 RESERVED4; /**< Reserved */ + __io uint32 APB1ENR; /**< APB1 peripheral clock enable register */ + __io uint32 APB2ENR; /**< APB2 peripheral clock enable register */ + const uint32 RESERVED5; /**< Reserved */ + const uint32 RESERVED6; /**< Reserved */ + __io uint32 AHB1LPENR; /**< AHB1 peripheral clock enable in + low power mode register */ + __io uint32 AHB2LPENR; /**< AHB2 peripheral clock enable in + low power mode register */ + __io uint32 AHB3LPENR; /**< AHB3 peripheral clock enable in + low power mode register */ + const uint32 RESERVED7; /**< Reserved */ + __io uint32 APB1LPENR; /**< APB1 peripheral clock enable in + low power mode register */ + __io uint32 APB2LPENR; /**< APB2 peripheral clock enable in + low power mode register */ + const uint32 RESERVED8; /**< Reserved */ + const uint32 RESERVED9; /**< Reserved */ + __io uint32 BDCR; /**< Backup domain control register */ + __io uint32 CSR; /**< Clock control and status register */ + const uint32 RESERVED10; /**< Reserved */ + const uint32 RESERVED11; /**< Reserved */ + __io uint32 SSCGR; /**< Spread spectrum clock generation + register */ + __io uint32 PLLI2SCFGR; /**< PLLI2S configuration register */ +} rcc_reg_map; + +#define RCC_BASE ((struct rcc_reg_map*)0x40023800) + +/* + * Register bit definitions + */ + +/* Clock control register */ + +#define RCC_CR_PLLI2SRDY_BIT 27 +#define RCC_CR_PLLI2SON_BIT 26 +#define RCC_CR_PLLRDY_BIT 25 +#define RCC_CR_PLLON_BIT 24 +#define RCC_CR_CSSON_BIT 19 +#define RCC_CR_HSEBYP_BIT 18 +#define RCC_CR_HSERDY_BIT 17 +#define RCC_CR_HSEON_BIT 16 +#define RCC_CR_HSIRDY_BIT 1 +#define RCC_CR_HSION_BIT 0 + +#define RCC_CR_PLLI2SRDY (1U << RCC_CR_PLLI2SRDY_BIT) +#define RCC_CR_PLLI2SON (1U << RCC_CR_PLLI2SON_BIT) +#define RCC_CR_PLLRDY (1U << RCC_CR_PLLRDY_BIT) +#define RCC_CR_PLLON (1U << RCC_CR_PLLON_BIT) +#define RCC_CR_CSSON (1U << RCC_CR_CSSON_BIT) +#define RCC_CR_HSEBYP (1U << RCC_CR_HSEBYP_BIT) +#define RCC_CR_HSERDY (1U << RCC_CR_HSERDY_BIT) +#define RCC_CR_HSEON (1U << RCC_CR_HSEON_BIT) +#define RCC_CR_HSICAL (0xFF << 8) +#define RCC_CR_HSITRIM (0x1F << 3) +#define RCC_CR_HSIRDY (1U << RCC_CR_HSIRDY_BIT) +#define RCC_CR_HSION (1U << RCC_CR_HSION_BIT) + +/* PLL configuration register */ + +#define RCC_PLLCFGR_PLLSRC_BIT 22 + +#define RCC_PLLCFGR_PLLQ (0xF << 24) +#define RCC_PLLCFGR_PLLSRC (1U << RCC_PLLCFGR_PLLSRC_BIT) +#define RCC_PLLCFGR_PLLSRC_HSI (0x0 << RCC_PLLCFGR_PLLSRC_BIT) +#define RCC_PLLCFGR_PLLSRC_HSE (0x1 << RCC_PLLCFGR_PLLSRC_BIT) +#define RCC_PLLCFGR_PLLP (0x3 << 16) +#define RCC_PLLCFGR_PLLN (0x1FF << 6) +#define RCC_PLLCFGR_PLLM 0x1F + +/* Clock configuration register */ + +#define RCC_CFGR_I2SSRC_BIT 23 + +#define RCC_CFGR_MCO2 (0x3 << 30) +#define RCC_CFGR_MCO2_SYSCLK (0x0 << 30) +#define RCC_CFGR_MCO2_PLLI2S (0x1 << 30) +#define RCC_CFGR_MCO2_HSE (0x2 << 30) +#define RCC_CFGR_MCO2_PLL (0x3 << 30) + +#define RCC_CFGR_MCO2PRE (0x7 << 27) +#define RCC_CFGR_MCO2PRE_DIV_1 (0x0 << 27) +#define RCC_CFGR_MCO2PRE_DIV_2 (0x4 << 27) +#define RCC_CFGR_MCO2PRE_DIV_3 (0x5 << 27) +#define RCC_CFGR_MCO2PRE_DIV_4 (0x6 << 27) +#define RCC_CFGR_MCO2PRE_DIV_5 (0x7 << 27) + +#define RCC_CFGR_MCO1PRE (0x7 << 24) +#define RCC_CFGR_MCO1PRE_DIV_1 (0x0 << 24) +#define RCC_CFGR_MCO1PRE_DIV_2 (0x4 << 24) +#define RCC_CFGR_MCO1PRE_DIV_3 (0x5 << 24) +#define RCC_CFGR_MCO1PRE_DIV_4 (0x6 << 24) +#define RCC_CFGR_MCO1PRE_DIV_5 (0x7 << 24) + +#define RCC_CFGR_I2SSRC (1U << RCC_CFGR_I2SSRC_BIT) +#define RCC_CFGR_I2SSRC_PLLI2S (0 << RCC_CFGR_I2SSRC_BIT) +#define RCC_CFGR_I2SSRC_I2S_CKIN (1 << RCC_CFGR_I2SSRC_BIT) + +#define RCC_CFGR_MCO1 (0x3 << 21) +#define RCC_CFGR_MCO1_HSI (0x0 << 21) +#define RCC_CFGR_MCO1_LSE (0x1 << 21) +#define RCC_CFGR_MCO1_HSE (0x2 << 21) +#define RCC_CFGR_MCO1_PLL (0x3 << 21) + +#define RCC_CFGR_RTCPRE (0x1F << 16) + +/* Skipped: all the 0b0xx values meaning "not divided" */ +#define RCC_CFGR_PPRE2 (0x7 << 13) +#define RCC_CFGR_PPRE2_AHB_DIV_2 (0x4 << 13) +#define RCC_CFGR_PPRE2_AHB_DIV_4 (0x5 << 13) +#define RCC_CFGR_PPRE2_AHB_DIV_8 (0x6 << 13) +#define RCC_CFGR_PPRE2_AHB_DIV_16 (0x7 << 13) + +/* Skipped: all the 0b0xx values meaning "not divided" */ +#define RCC_CFGR_PPRE1 (0x7 << 10) +#define RCC_CFGR_PPRE1_AHB_DIV_2 (0x4 << 10) +#define RCC_CFGR_PPRE1_AHB_DIV_4 (0x5 << 10) +#define RCC_CFGR_PPRE1_AHB_DIV_8 (0x6 << 10) +#define RCC_CFGR_PPRE1_AHB_DIV_16 (0x7 << 10) + +/* Skipped: all the 0b0xxx values meaning "not divided" */ +#define RCC_CFGR_HPRE (0xF << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_2 (0x8 << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_4 (0x9 << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_8 (0xA << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_16 (0xB << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_64 (0xC << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_128 (0xD << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_256 (0xE << 4) +#define RCC_CFGR_HPRE_SYSCLK_DIV_512 (0xF << 4) + +#define RCC_CFGR_SWS (0x3 << 2) +#define RCC_CFGR_SWS_HSI (0x0 << 2) +#define RCC_CFGR_SWS_HSE (0x1 << 2) +#define RCC_CFGR_SWS_PLL (0x2 << 2) + +#define RCC_CFGR_SW 0x3 +#define RCC_CFGR_SW_HSI 0x0 +#define RCC_CFGR_SW_HSE 0x1 +#define RCC_CFGR_SW_PLL 0x2 + +/* Clock interrupt register */ + +#define RCC_CIR_CSSC_BIT 23 + +#define RCC_CIR_PLLI2SRDYC_BIT 21 +#define RCC_CIR_PLLRDYC_BIT 20 +#define RCC_CIR_HSERDYC_BIT 19 +#define RCC_CIR_HSIRDYC_BIT 18 +#define RCC_CIR_LSERDYC_BIT 17 +#define RCC_CIR_LSIRDYC_BIT 16 + +#define RCC_CIR_PLLI2SRDYIE_BIT 13 +#define RCC_CIR_PLLRDYIE_BIT 12 +#define RCC_CIR_HSERDYIE_BIT 11 +#define RCC_CIR_HSIRDYIE_BIT 10 +#define RCC_CIR_LSERDYIE_BIT 9 +#define RCC_CIR_LSIRDYIE_BIT 8 + +#define RCC_CIR_CSSF_BIT 7 + +#define RCC_CIR_PLLI2SRDYF_BIT 5 +#define RCC_CIR_PLLRDYF_BIT 4 +#define RCC_CIR_HSERDYF_BIT 3 +#define RCC_CIR_HSIRDYF_BIT 2 +#define RCC_CIR_LSERDYF_BIT 1 +#define RCC_CIR_LSIRDYF_BIT 0 + +#define RCC_CIR_CSSC (1U << RCC_CIR_CSSC_BIT) + +#define RCC_CIR_PLLI2SRDYC (1U << RCC_CIR_PLLI2SRDYC_BIT) +#define RCC_CIR_PLLRDYC (1U << RCC_CIR_PLLRDYC_BIT) +#define RCC_CIR_HSERDYC (1U << RCC_CIR_HSERDYC_BIT) +#define RCC_CIR_HSIRDYC (1U << RCC_CIR_HSIRDYC_BIT) +#define RCC_CIR_LSERDYC (1U << RCC_CIR_LSERDYC_BIT) +#define RCC_CIR_LSIRDYC (1U << RCC_CIR_LSIRDYC_BIT) + +#define RCC_CIR_PLLI2SRDYIE (1U << RCC_CIR_PLLI2SRDYIE_BIT) +#define RCC_CIR_PLLRDYIE (1U << RCC_CIR_PLLRDYIE_BIT) +#define RCC_CIR_HSERDYIE (1U << RCC_CIR_HSERDYIE_BIT) +#define RCC_CIR_HSIRDYIE (1U << RCC_CIR_HSIRDYIE_BIT) +#define RCC_CIR_LSERDYIE (1U << RCC_CIR_LSERDYIE_BIT) +#define RCC_CIR_LSIRDYIE (1U << RCC_CIR_LSIRDYIE_BIT) + +#define RCC_CIR_CSSF (1U << RCC_CIR_CSSF_BIT) + +#define RCC_CIR_PLLI2SRDYF (1U << RCC_CIR_PLLI2SRDYF_BIT) +#define RCC_CIR_PLLRDYF (1U << RCC_CIR_PLLRDYF_BIT) +#define RCC_CIR_HSERDYF (1U << RCC_CIR_HSERDYF_BIT) +#define RCC_CIR_HSIRDYF (1U << RCC_CIR_HSIRDYF_BIT) +#define RCC_CIR_LSERDYF (1U << RCC_CIR_LSERDYF_BIT) +#define RCC_CIR_LSIRDYF (1U << RCC_CIR_LSIRDYF_BIT) + +/* AHB1 peripheral reset register */ + +#define RCC_AHB1RSTR_OTGHSRST_BIT 29 +#define RCC_AHB1RSTR_ETHMACRST_BIT 25 +#define RCC_AHB1RSTR_DMA2RST_BIT 22 +#define RCC_AHB1RSTR_DMA1RST_BIT 21 +#define RCC_AHB1RSTR_CRCRST_BIT 12 +#define RCC_AHB1RSTR_GPIOIRST_BIT 8 +#define RCC_AHB1RSTR_GPIOHRST_BIT 7 +#define RCC_AHB1RSTR_GPIOGRST_BIT 6 +#define RCC_AHB1RSTR_GPIOFRST_BIT 5 +#define RCC_AHB1RSTR_GPIOERST_BIT 4 +#define RCC_AHB1RSTR_GPIODRST_BIT 3 +#define RCC_AHB1RSTR_GPIOCRST_BIT 2 +#define RCC_AHB1RSTR_GPIOBRST_BIT 1 +#define RCC_AHB1RSTR_GPIOARST_BIT 0 + +#define RCC_AHB1RSTR_OTGHSRST (1U << RCC_AHB1RSTR_OTGHSRST_BIT) +#define RCC_AHB1RSTR_ETHMACRST (1U << RCC_AHB1RSTR_ETHMACRST_BIT) +#define RCC_AHB1RSTR_DMA2RST (1U << RCC_AHB1RSTR_DMA2RST_BIT) +#define RCC_AHB1RSTR_DMA1RST (1U << RCC_AHB1RSTR_DMA1RST_BIT) +#define RCC_AHB1RSTR_CRCRST (1U << RCC_AHB1RSTR_CRCRST_BIT) +#define RCC_AHB1RSTR_GPIOIRST (1U << RCC_AHB1RSTR_GPIOIRST_BIT) +#define RCC_AHB1RSTR_GPIOHRST (1U << RCC_AHB1RSTR_GPIOHRST_BIT) +#define RCC_AHB1RSTR_GPIOGRST (1U << RCC_AHB1RSTR_GPIOGRST_BIT) +#define RCC_AHB1RSTR_GPIOFRST (1U << RCC_AHB1RSTR_GPIOFRST_BIT) +#define RCC_AHB1RSTR_GPIOERST (1U << RCC_AHB1RSTR_GPIOERST_BIT) +#define RCC_AHB1RSTR_GPIODRST (1U << RCC_AHB1RSTR_GPIODRST_BIT) +#define RCC_AHB1RSTR_GPIOCRST (1U << RCC_AHB1RSTR_GPIOCRST_BIT) +#define RCC_AHB1RSTR_GPIOBRST (1U << RCC_AHB1RSTR_GPIOBRST_BIT) +#define RCC_AHB1RSTR_GPIOARST (1U << RCC_AHB1RSTR_GPIOARST_BIT) + +/* AHB2 peripheral reset register */ + +#define RCC_AHB2RSTR_OTGFSRST_BIT 7 +#define RCC_AHB2RSTR_RNGRST_BIT 6 +#define RCC_AHB2RSTR_HASHRST_BIT 5 +#define RCC_AHB2RSTR_CRYPRST_BIT 4 +#define RCC_AHB2RSTR_DCMIRST_BIT 0 + +#define RCC_AHB2RSTR_OTGFSRST (1U << RCC_AHB2RSTR_OTGFSRST_BIT) +#define RCC_AHB2RSTR_RNGRST (1U << RCC_AHB2RSTR_RNGRST_BIT) +#define RCC_AHB2RSTR_HASHRST (1U << RCC_AHB2RSTR_HASHRST_BIT) +#define RCC_AHB2RSTR_CRYPRST (1U << RCC_AHB2RSTR_CRYPRST_BIT) +#define RCC_AHB2RSTR_DCMIRST (1U << RCC_AHB2RSTR_DCMIRST_BIT) + +/* AHB3 peripheral reset register */ + +#define RCC_AHB3RSTR_FSMCRST_BIT 0 + +#define RCC_AHB3RSTR_FSMCRST (1U << RCC_AHB3RSTR_FSMCRST_BIT) + +/* APB1 peripheral reset register */ + +#define RCC_APB1RSTR_DACRST_BIT 29 +#define RCC_APB1RSTR_PWRRST_BIT 28 +#define RCC_APB1RSTR_CAN2RST_BIT 26 +#define RCC_APB1RSTR_CAN1RST_BIT 25 +#define RCC_APB1RSTR_I2C3RST_BIT 23 +#define RCC_APB1RSTR_I2C2RST_BIT 22 +#define RCC_APB1RSTR_I2C1RST_BIT 21 +#define RCC_APB1RSTR_UART5RST_BIT 20 +#define RCC_APB1RSTR_UART4RST_BIT 19 +#define RCC_APB1RSTR_UART3RST_BIT 18 +#define RCC_APB1RSTR_UART2RST_BIT 17 +#define RCC_APB1RSTR_SPI3RST_BIT 15 +#define RCC_APB1RSTR_SPI2RST_BIT 14 +#define RCC_APB1RSTR_WWDGRST_BIT 11 +#define RCC_APB1RSTR_TIM14RST_BIT 8 +#define RCC_APB1RSTR_TIM13RST_BIT 7 +#define RCC_APB1RSTR_TIM12RST_BIT 6 +#define RCC_APB1RSTR_TIM7RST_BIT 5 +#define RCC_APB1RSTR_TIM6RST_BIT 4 +#define RCC_APB1RSTR_TIM5RST_BIT 3 +#define RCC_APB1RSTR_TIM4RST_BIT 2 +#define RCC_APB1RSTR_TIM3RST_BIT 1 +#define RCC_APB1RSTR_TIM2RST_BIT 0 + +#define RCC_APB1RSTR_DACRST (1U << RCC_APB1RSTR_DACRST_BIT) +#define RCC_APB1RSTR_PWRRST (1U << RCC_APB1RSTR_PWRRST_BIT) +#define RCC_APB1RSTR_CAN2RST (1U << RCC_APB1RSTR_CAN2RST_BIT) +#define RCC_APB1RSTR_CAN1RST (1U << RCC_APB1RSTR_CAN1RST_BIT) +#define RCC_APB1RSTR_I2C3RST (1U << RCC_APB1RSTR_I2C3RST_BIT) +#define RCC_APB1RSTR_I2C2RST (1U << RCC_APB1RSTR_I2C2RST_BIT) +#define RCC_APB1RSTR_I2C1RST (1U << RCC_APB1RSTR_I2C1RST_BIT) +#define RCC_APB1RSTR_UART5RST (1U << RCC_APB1RSTR_UART5RST_BIT) +#define RCC_APB1RSTR_UART4RST (1U << RCC_APB1RSTR_UART4RST_BIT) +#define RCC_APB1RSTR_UART3RST (1U << RCC_APB1RSTR_UART3RST_BIT) +#define RCC_APB1RSTR_UART2RST (1U << RCC_APB1RSTR_UART2RST_BIT) +#define RCC_APB1RSTR_SPI3RST (1U << RCC_APB1RSTR_SPI3RST_BIT) +#define RCC_APB1RSTR_SPI2RST (1U << RCC_APB1RSTR_SPI2RST_BIT) +#define RCC_APB1RSTR_WWDGRST (1U << RCC_APB1RSTR_WWDGRST_BIT) +#define RCC_APB1RSTR_TIM14RST (1U << RCC_APB1RSTR_TIM14RST_BIT) +#define RCC_APB1RSTR_TIM13RST (1U << RCC_APB1RSTR_TIM13RST_BIT) +#define RCC_APB1RSTR_TIM12RST (1U << RCC_APB1RSTR_TIM12RST_BIT) +#define RCC_APB1RSTR_TIM7RST (1U << RCC_APB1RSTR_TIM7RST_BIT) +#define RCC_APB1RSTR_TIM6RST (1U << RCC_APB1RSTR_TIM6RST_BIT) +#define RCC_APB1RSTR_TIM5RST (1U << RCC_APB1RSTR_TIM5RST_BIT) +#define RCC_APB1RSTR_TIM4RST (1U << RCC_APB1RSTR_TIM4RST_BIT) +#define RCC_APB1RSTR_TIM3RST (1U << RCC_APB1RSTR_TIM3RST_BIT) +#define RCC_APB1RSTR_TIM2RST (1U << RCC_APB1RSTR_TIM2RST_BIT) + +/* APB2 peripheral reset register */ + +#define RCC_APB2RSTR_TIM11RST_BIT 18 +#define RCC_APB2RSTR_TIM10RST_BIT 17 +#define RCC_APB2RSTR_TIM9RST_BIT 16 +#define RCC_APB2RSTR_SYSCFGRST_BIT 14 +#define RCC_APB2RSTR_SPI1RST_BIT 12 +#define RCC_APB2RSTR_SDIORST_BIT 11 +#define RCC_APB2RSTR_ADCRST_BIT 8 +#define RCC_APB2RSTR_USART6RST_BIT 5 +#define RCC_APB2RSTR_USART1RST_BIT 4 +#define RCC_APB2RSTR_TIM8RST_BIT 1 +#define RCC_APB2RSTR_TIM1RST_BIT 0 + +#define RCC_APB2RSTR_TIM11RST (1U << RCC_APB2RSTR_TIM11RST_BIT) +#define RCC_APB2RSTR_TIM10RST (1U << RCC_APB2RSTR_TIM10RST_BIT) +#define RCC_APB2RSTR_TIM9RST (1U << RCC_APB2RSTR_TIM9RST_BIT) +#define RCC_APB2RSTR_SYSCFGRST (1U << RCC_APB2RSTR_SYSCFGRST_BIT) +#define RCC_APB2RSTR_SPI1RST (1U << RCC_APB2RSTR_SPI1RST_BIT) +#define RCC_APB2RSTR_SDIORST (1U << RCC_APB2RSTR_SDIORST_BIT) +#define RCC_APB2RSTR_ADCRST (1U << RCC_APB2RSTR_ADCRST_BIT) +#define RCC_APB2RSTR_USART6RST (1U << RCC_APB2RSTR_USART6RST_BIT) +#define RCC_APB2RSTR_USART1RST (1U << RCC_APB2RSTR_USART1RST_BIT) +#define RCC_APB2RSTR_TIM8RST (1U << RCC_APB2RSTR_TIM8RST_BIT) +#define RCC_APB2RSTR_TIM1RST (1U << RCC_APB2RSTR_TIM1RST_BIT) + +/* AHB1 peripheral clock enable register */ + +#define RCC_AHB1ENR_OTGHSULPIEN_BIT 30 +#define RCC_AHB1ENR_OTGHSEN_BIT 29 +#define RCC_AHB1ENR_ETHMACPTPEN_BIT 28 +#define RCC_AHB1ENR_ETHMACRXEN_BIT 27 +#define RCC_AHB1ENR_ETHMACTXEN_BIT 26 +#define RCC_AHB1ENR_ETHMACEN_BIT 25 +#define RCC_AHB1ENR_DMA2EN_BIT 22 +#define RCC_AHB1ENR_DMA1EN_BIT 21 +#define RCC_AHB1ENR_BKPSRAMEN_BIT 18 +#define RCC_AHB1ENR_CRCEN_BIT 12 +#define RCC_AHB1ENR_GPIOIEN_BIT 8 +#define RCC_AHB1ENR_GPIOHEN_BIT 7 +#define RCC_AHB1ENR_GPIOGEN_BIT 6 +#define RCC_AHB1ENR_GPIOFEN_BIT 5 +#define RCC_AHB1ENR_GPIOEEN_BIT 4 +#define RCC_AHB1ENR_GPIODEN_BIT 3 +#define RCC_AHB1ENR_GPIOCEN_BIT 2 +#define RCC_AHB1ENR_GPIOBEN_BIT 1 +#define RCC_AHB1ENR_GPIOAEN_BIT 0 + +#define RCC_AHB1ENR_OTGHSULPIEN (1U << RCC_AHB1ENR_OTGHSULPIEN_BIT) +#define RCC_AHB1ENR_OTGHSEN (1U << RCC_AHB1ENR_OTGHSEN_BIT) +#define RCC_AHB1ENR_ETHMACPTPEN (1U << RCC_AHB1ENR_ETHMACPTPEN_BIT) +#define RCC_AHB1ENR_ETHMACRXEN (1U << RCC_AHB1ENR_ETHMACRXEN_BIT) +#define RCC_AHB1ENR_ETHMACTXEN (1U << RCC_AHB1ENR_ETHMACTXEN_BIT) +#define RCC_AHB1ENR_ETHMACEN (1U << RCC_AHB1ENR_ETHMACEN_BIT) +#define RCC_AHB1ENR_DMA2EN (1U << RCC_AHB1ENR_DMA2EN_BIT) +#define RCC_AHB1ENR_DMA1EN (1U << RCC_AHB1ENR_DMA1EN_BIT) +#define RCC_AHB1ENR_BKPSRAMEN (1U << RCC_AHB1ENR_BKPSRAMEN_BIT) +#define RCC_AHB1ENR_CRCEN (1U << RCC_AHB1ENR_CRCEN_BIT) +#define RCC_AHB1ENR_GPIOIEN (1U << RCC_AHB1ENR_GPIOIEN_BIT) +#define RCC_AHB1ENR_GPIOHEN (1U << RCC_AHB1ENR_GPIOHEN_BIT) +#define RCC_AHB1ENR_GPIOGEN (1U << RCC_AHB1ENR_GPIOGEN_BIT) +#define RCC_AHB1ENR_GPIOFEN (1U << RCC_AHB1ENR_GPIOFEN_BIT) +#define RCC_AHB1ENR_GPIOEEN (1U << RCC_AHB1ENR_GPIOEEN_BIT) +#define RCC_AHB1ENR_GPIODEN (1U << RCC_AHB1ENR_GPIODEN_BIT) +#define RCC_AHB1ENR_GPIOCEN (1U << RCC_AHB1ENR_GPIOCEN_BIT) +#define RCC_AHB1ENR_GPIOBEN (1U << RCC_AHB1ENR_GPIOBEN_BIT) +#define RCC_AHB1ENR_GPIOAEN (1U << RCC_AHB1ENR_GPIOAEN_BIT) + +/* AHB2 peripheral clock enable register */ + +#define RCC_AHB2ENR_OTGFSEN_BIT 7 +#define RCC_AHB2ENR_RNGEN_BIT 6 +#define RCC_AHB2ENR_HASHEN_BIT 5 +#define RCC_AHB2ENR_CRYPEN_BIT 4 +#define RCC_AHB2ENR_DCMIEN_BIT 0 + +#define RCC_AHB2ENR_OTGFSEN (1U << RCC_AHB2ENR_OTGFSEN_BIT) +#define RCC_AHB2ENR_RNGEN (1U << RCC_AHB2ENR_RNGEN_BIT) +#define RCC_AHB2ENR_HASHEN (1U << RCC_AHB2ENR_HASHEN_BIT) +#define RCC_AHB2ENR_CRYPEN (1U << RCC_AHB2ENR_CRYPEN_BIT) +#define RCC_AHB2ENR_DCMIEN (1U << RCC_AHB2ENR_DCMIEN_BIT) + +/* AHB3 peripheral clock enable register */ + +#define RCC_AHB3ENR_FSMCEN_BIT 0 + +#define RCC_AHB3ENR_FSMCEN (1U << RCC_AHB3ENR_FSMCEN_BIT) + +/* APB1 peripheral clock enable register */ + +#define RCC_APB1ENR_DACEN_BIT 29 +#define RCC_APB1ENR_PWREN_BIT 28 +#define RCC_APB1ENR_CAN2EN_BIT 26 +#define RCC_APB1ENR_CAN1EN_BIT 25 +#define RCC_APB1ENR_I2C3EN_BIT 23 +#define RCC_APB1ENR_I2C2EN_BIT 22 +#define RCC_APB1ENR_I2C1EN_BIT 21 +#define RCC_APB1ENR_UART5EN_BIT 20 +#define RCC_APB1ENR_UART4EN_BIT 19 +#define RCC_APB1ENR_USART3EN_BIT 18 +#define RCC_APB1ENR_USART2EN_BIT 17 +#define RCC_APB1ENR_SPI3EN_BIT 15 +#define RCC_APB1ENR_SPI2EN_BIT 14 +#define RCC_APB1ENR_WWDGEN_BIT 11 +#define RCC_APB1ENR_TIM14EN_BIT 8 +#define RCC_APB1ENR_TIM13EN_BIT 7 +#define RCC_APB1ENR_TIM12EN_BIT 6 +#define RCC_APB1ENR_TIM7EN_BIT 5 +#define RCC_APB1ENR_TIM6EN_BIT 4 +#define RCC_APB1ENR_TIM5EN_BIT 3 +#define RCC_APB1ENR_TIM4EN_BIT 2 +#define RCC_APB1ENR_TIM3EN_BIT 1 +#define RCC_APB1ENR_TIM2EN_BIT 0 + +#define RCC_APB1ENR_DACEN (1U << RCC_APB1ENR_DACEN_BIT) +#define RCC_APB1ENR_PWREN (1U << RCC_APB1ENR_PWREN_BIT) +#define RCC_APB1ENR_CAN2EN (1U << RCC_APB1ENR_CAN2EN_BIT) +#define RCC_APB1ENR_CAN1EN (1U << RCC_APB1ENR_CAN1EN_BIT) +#define RCC_APB1ENR_I2C3EN (1U << RCC_APB1ENR_I2C3EN_BIT) +#define RCC_APB1ENR_I2C2EN (1U << RCC_APB1ENR_I2C2EN_BIT) +#define RCC_APB1ENR_I2C1EN (1U << RCC_APB1ENR_I2C1EN_BIT) +#define RCC_APB1ENR_UART5EN (1U << RCC_APB1ENR_UART5EN_BIT) +#define RCC_APB1ENR_UART4EN (1U << RCC_APB1ENR_UART4EN_BIT) +#define RCC_APB1ENR_USART3EN (1U << RCC_APB1ENR_USART3EN_BIT) +#define RCC_APB1ENR_USART2EN (1U << RCC_APB1ENR_USART2EN_BIT) +#define RCC_APB1ENR_SPI3EN (1U << RCC_APB1ENR_SPI3EN_BIT) +#define RCC_APB1ENR_SPI2EN (1U << RCC_APB1ENR_SPI2EN_BIT) +#define RCC_APB1ENR_WWDGEN (1U << RCC_APB1ENR_WWDGEN_BIT) +#define RCC_APB1ENR_TIM14EN (1U << RCC_APB1ENR_TIM14EN_BIT) +#define RCC_APB1ENR_TIM13EN (1U << RCC_APB1ENR_TIM13EN_BIT) +#define RCC_APB1ENR_TIM12EN (1U << RCC_APB1ENR_TIM12EN_BIT) +#define RCC_APB1ENR_TIM7EN (1U << RCC_APB1ENR_TIM7EN_BIT) +#define RCC_APB1ENR_TIM6EN (1U << RCC_APB1ENR_TIM6EN_BIT) +#define RCC_APB1ENR_TIM5EN (1U << RCC_APB1ENR_TIM5EN_BIT) +#define RCC_APB1ENR_TIM4EN (1U << RCC_APB1ENR_TIM4EN_BIT) +#define RCC_APB1ENR_TIM3EN (1U << RCC_APB1ENR_TIM3EN_BIT) +#define RCC_APB1ENR_TIM2EN (1U << RCC_APB1ENR_TIM2EN_BIT) + +/* APB2 peripheral clock enable register */ + +#define RCC_APB2ENR_TIM11EN_BIT 18 +#define RCC_APB2ENR_TIM10EN_BIT 17 +#define RCC_APB2ENR_TIM9EN_BIT 16 +#define RCC_APB2ENR_SYSCFGEN_BIT 14 +#define RCC_APB2ENR_SPI1EN_BIT 12 +#define RCC_APB2ENR_SDIOEN_BIT 11 +#define RCC_APB2ENR_ADC3EN_BIT 10 +#define RCC_APB2ENR_ADC2EN_BIT 9 +#define RCC_APB2ENR_ADC1EN_BIT 8 +#define RCC_APB2ENR_USART6EN_BIT 5 +#define RCC_APB2ENR_USART1EN_BIT 4 +#define RCC_APB2ENR_TIM8EN_BIT 1 +#define RCC_APB2ENR_TIM1EN_BIT 0 + +#define RCC_APB2ENR_TIM11EN (1U << RCC_APB2ENR_TIM11EN_BIT) +#define RCC_APB2ENR_TIM10EN (1U << RCC_APB2ENR_TIM10EN_BIT) +#define RCC_APB2ENR_TIM9EN (1U << RCC_APB2ENR_TIM9EN_BIT) +#define RCC_APB2ENR_SYSCFGEN (1U << RCC_APB2ENR_SYSCFGEN_BIT) +#define RCC_APB2ENR_SPI1EN (1U << RCC_APB2ENR_SPI1EN_BIT) +#define RCC_APB2ENR_SDIOEN (1U << RCC_APB2ENR_SDIOEN_BIT) +#define RCC_APB2ENR_ADC3EN (1U << RCC_APB2ENR_ADC3EN_BIT) +#define RCC_APB2ENR_ADC2EN (1U << RCC_APB2ENR_ADC2EN_BIT) +#define RCC_APB2ENR_ADC1EN (1U << RCC_APB2ENR_ADC1EN_BIT) +#define RCC_APB2ENR_USART6EN (1U << RCC_APB2ENR_USART6EN_BIT) +#define RCC_APB2ENR_USART1EN (1U << RCC_APB2ENR_USART1EN_BIT) +#define RCC_APB2ENR_TIM8EN (1U << RCC_APB2ENR_TIM8EN_BIT) +#define RCC_APB2ENR_TIM1EN (1U << RCC_APB2ENR_TIM1EN_BIT) + +/* AHB1 peripheral clock enable in low power mode register */ + +#define RCC_AHB1LPENR_OTGHSULPILPEN_BIT 30 +#define RCC_AHB1LPENR_OTGHSLPEN_BIT 29 +#define RCC_AHB1LPENR_ETHMACPTPLPEN_BIT 28 +#define RCC_AHB1LPENR_ETHMACRXLPEN_BIT 27 +#define RCC_AHB1LPENR_ETHMACTXLPEN_BIT 26 +#define RCC_AHB1LPENR_ETHMACLPEN_BIT 25 +#define RCC_AHB1LPENR_DMA2LPEN_BIT 22 +#define RCC_AHB1LPENR_DMA1LPEN_BIT 21 +#define RCC_AHB1LPENR_BKPSRAMLPEN_BIT 18 +#define RCC_AHB1LPENR_SRAM2LPEN_BIT 17 +#define RCC_AHB1LPENR_SRAM1LPEN_BIT 16 +#define RCC_AHB1LPENR_FLITFLPEN_BIT 15 +#define RCC_AHB1LPENR_CRCLPEN_BIT 12 +#define RCC_AHB1LPENR_GPIOILPEN_BIT 8 +#define RCC_AHB1LPENR_GPIOGLPEN_BIT 6 +#define RCC_AHB1LPENR_GPIOFLPEN_BIT 5 +#define RCC_AHB1LPENR_GPIOELPEN_BIT 4 +#define RCC_AHB1LPENR_GPIODLPEN_BIT 3 +#define RCC_AHB1LPENR_GPIOCLPEN_BIT 2 +#define RCC_AHB1LPENR_GPIOBLPEN_BIT 1 +#define RCC_AHB1LPENR_GPIOALPEN_BIT 0 + +#define RCC_AHB1LPENR_OTGHSULPILPEN (1U << RCC_AHB1LPENR_OTGHSULPILPEN_BIT) +#define RCC_AHB1LPENR_OTGHSLPEN (1U << RCC_AHB1LPENR_OTGHSLPEN_BIT) +#define RCC_AHB1LPENR_ETHMACPTPLPEN (1U << RCC_AHB1LPENR_ETHMACPTPLPEN_BIT) +#define RCC_AHB1LPENR_ETHMACRXLPEN (1U << RCC_AHB1LPENR_ETHMACRXLPEN_BIT) +#define RCC_AHB1LPENR_ETHMACTXLPEN (1U << RCC_AHB1LPENR_ETHMACTXLPEN_BIT) +#define RCC_AHB1LPENR_ETHMACLPEN (1U << RCC_AHB1LPENR_ETHMACLPEN_BIT) +#define RCC_AHB1LPENR_DMA2LPEN (1U << RCC_AHB1LPENR_DMA2LPEN_BIT) +#define RCC_AHB1LPENR_DMA1LPEN (1U << RCC_AHB1LPENR_DMA1LPEN_BIT) +#define RCC_AHB1LPENR_BKPSRAMLPEN (1U << RCC_AHB1LPENR_BKPSRAMLPEN_BIT) +#define RCC_AHB1LPENR_SRAM2LPEN (1U << RCC_AHB1LPENR_SRAM2LPEN_BIT) +#define RCC_AHB1LPENR_SRAM1LPEN (1U << RCC_AHB1LPENR_SRAM1LPEN_BIT) +#define RCC_AHB1LPENR_FLITFLPEN (1U << RCC_AHB1LPENR_FLITFLPEN_BIT) +#define RCC_AHB1LPENR_CRCLPEN (1U << RCC_AHB1LPENR_CRCLPEN_BIT) +#define RCC_AHB1LPENR_GPIOILPEN (1U << RCC_AHB1LPENR_GPIOILPEN_BIT) +#define RCC_AHB1LPENR_GPIOGLPEN (1U << RCC_AHB1LPENR_GPIOGLPEN_BIT) +#define RCC_AHB1LPENR_GPIOFLPEN (1U << RCC_AHB1LPENR_GPIOFLPEN_BIT) +#define RCC_AHB1LPENR_GPIOELPEN (1U << RCC_AHB1LPENR_GPIOELPEN_BIT) +#define RCC_AHB1LPENR_GPIODLPEN (1U << RCC_AHB1LPENR_GPIODLPEN_BIT) +#define RCC_AHB1LPENR_GPIOCLPEN (1U << RCC_AHB1LPENR_GPIOCLPEN_BIT) +#define RCC_AHB1LPENR_GPIOBLPEN (1U << RCC_AHB1LPENR_GPIOBLPEN_BIT) +#define RCC_AHB1LPENR_GPIOALPEN (1U << RCC_AHB1LPENR_GPIOALPEN_BIT) + +/* AHB2 peripheral clock enable in low power mode register */ + +#define RCC_AHB2LPENR_OTGFSLPEN_BIT 7 +#define RCC_AHB2LPENR_RNGLPEN_BIT 6 +#define RCC_AHB2LPENR_HASHLPEN_BIT 5 +#define RCC_AHB2LPENR_CRYPLPEN_BIT 4 +#define RCC_AHB2LPENR_DCMILPEN_BIT 0 + +#define RCC_AHB2LPENR_OTGFSLPEN (1U << RCC_AHB2LPENR_OTGFSLPEN_BIT) +#define RCC_AHB2LPENR_RNGLPEN (1U << RCC_AHB2LPENR_RNGLPEN_BIT) +#define RCC_AHB2LPENR_HASHLPEN (1U << RCC_AHB2LPENR_HASHLPEN_BIT) +#define RCC_AHB2LPENR_CRYPLPEN (1U << RCC_AHB2LPENR_CRYPLPEN_BIT) +#define RCC_AHB2LPENR_DCMILPEN (1U << RCC_AHB2LPENR_DCMILPEN_BIT) + +/* AHB3 peripheral clock enable in low power mode register */ + +#define RCC_AHB3LPENR_FSMCLPEN_BIT 0 + +#define RCC_AHB3LPENR_FSMCLPEN (1U << RCC_AHB3LPENR_FSMCLPEN_BIT) + +/* APB1 peripheral clock enable in low power mode register */ + +#define RCC_APB1LPENR_DACLPEN_BIT 29 +#define RCC_APB1LPENR_PWRLPEN_BIT 28 +#define RCC_APB1LPENR_CAN2LPEN_BIT 26 +#define RCC_APB1LPENR_CAN1LPEN_BIT 25 +#define RCC_APB1LPENR_I2C3LPEN_BIT 23 +#define RCC_APB1LPENR_I2C2LPEN_BIT 22 +#define RCC_APB1LPENR_I2C1LPEN_BIT 21 +#define RCC_APB1LPENR_UART5LPEN_BIT 20 +#define RCC_APB1LPENR_UART4LPEN_BIT 19 +#define RCC_APB1LPENR_USART3LPEN_BIT 18 +#define RCC_APB1LPENR_USART2LPEN_BIT 17 +#define RCC_APB1LPENR_SPI3LPEN_BIT 15 +#define RCC_APB1LPENR_SPI2LPEN_BIT 14 +#define RCC_APB1LPENR_WWDGLPEN_BIT 11 +#define RCC_APB1LPENR_TIM14LPEN_BIT 8 +#define RCC_APB1LPENR_TIM13LPEN_BIT 7 +#define RCC_APB1LPENR_TIM12LPEN_BIT 6 +#define RCC_APB1LPENR_TIM7LPEN_BIT 5 +#define RCC_APB1LPENR_TIM6LPEN_BIT 4 +#define RCC_APB1LPENR_TIM5LPEN_BIT 3 +#define RCC_APB1LPENR_TIM4LPEN_BIT 2 +#define RCC_APB1LPENR_TIM3LPEN_BIT 1 +#define RCC_APB1LPENR_TIM2LPEN_BIT 0 + +#define RCC_APB1LPENR_DACLPEN (1U << RCC_APB1LPENR_DACLPEN_BIT) +#define RCC_APB1LPENR_PWRLPEN (1U << RCC_APB1LPENR_PWRLPEN_BIT) +#define RCC_APB1LPENR_CAN2LPEN (1U << RCC_APB1LPENR_CAN2LPEN_BIT) +#define RCC_APB1LPENR_CAN1LPEN (1U << RCC_APB1LPENR_CAN1LPEN_BIT) +#define RCC_APB1LPENR_I2C3LPEN (1U << RCC_APB1LPENR_I2C3LPEN_BIT) +#define RCC_APB1LPENR_I2C2LPEN (1U << RCC_APB1LPENR_I2C2LPEN_BIT) +#define RCC_APB1LPENR_I2C1LPEN (1U << RCC_APB1LPENR_I2C1LPEN_BIT) +#define RCC_APB1LPENR_UART5LPEN (1U << RCC_APB1LPENR_UART5LPEN_BIT) +#define RCC_APB1LPENR_UART4LPEN (1U << RCC_APB1LPENR_UART4LPEN_BIT) +#define RCC_APB1LPENR_USART3LPEN (1U << RCC_APB1LPENR_USART3LPEN_BIT) +#define RCC_APB1LPENR_USART2LPEN (1U << RCC_APB1LPENR_USART2LPEN_BIT) +#define RCC_APB1LPENR_SPI3LPEN (1U << RCC_APB1LPENR_SPI3LPEN_BIT) +#define RCC_APB1LPENR_SPI2LPEN (1U << RCC_APB1LPENR_SPI2LPEN_BIT) +#define RCC_APB1LPENR_WWDGLPEN (1U << RCC_APB1LPENR_WWDGLPEN_BIT) +#define RCC_APB1LPENR_TIM14LPEN (1U << RCC_APB1LPENR_TIM14LPEN_BIT) +#define RCC_APB1LPENR_TIM13LPEN (1U << RCC_APB1LPENR_TIM13LPEN_BIT) +#define RCC_APB1LPENR_TIM12LPEN (1U << RCC_APB1LPENR_TIM12LPEN_BIT) +#define RCC_APB1LPENR_TIM7LPEN (1U << RCC_APB1LPENR_TIM7LPEN_BIT) +#define RCC_APB1LPENR_TIM6LPEN (1U << RCC_APB1LPENR_TIM6LPEN_BIT) +#define RCC_APB1LPENR_TIM5LPEN (1U << RCC_APB1LPENR_TIM5LPEN_BIT) +#define RCC_APB1LPENR_TIM4LPEN (1U << RCC_APB1LPENR_TIM4LPEN_BIT) +#define RCC_APB1LPENR_TIM3LPEN (1U << RCC_APB1LPENR_TIM3LPEN_BIT) +#define RCC_APB1LPENR_TIM2LPEN (1U << RCC_APB1LPENR_TIM2LPEN_BIT) + +/* APB2 peripheral clock enable in low power mode register */ + +#define RCC_APB2LPENR_TIM11LPEN_BIT 18 +#define RCC_APB2LPENR_TIM10LPEN_BIT 17 +#define RCC_APB2LPENR_TIM9LPEN_BIT 16 +#define RCC_APB2LPENR_SYSCFGLPEN_BIT 14 +#define RCC_APB2LPENR_SPI1LPEN_BIT 12 +#define RCC_APB2LPENR_SDIOLPEN_BIT 11 +#define RCC_APB2LPENR_ADC3LPEN_BIT 10 +#define RCC_APB2LPENR_ADC2LPEN_BIT 9 +#define RCC_APB2LPENR_ADC1LPEN_BIT 8 +#define RCC_APB2LPENR_USART6LPEN_BIT 5 +#define RCC_APB2LPENR_USART1LPEN_BIT 4 +#define RCC_APB2LPENR_TIM8LPEN_BIT 1 +#define RCC_APB2LPENR_TIM1LPEN_BIT 0 + +#define RCC_APB2LPENR_TIM11LPEN (1U << RCC_APB2LPENR_TIM11LPEN_BIT) +#define RCC_APB2LPENR_TIM10LPEN (1U << RCC_APB2LPENR_TIM10LPEN_BIT) +#define RCC_APB2LPENR_TIM9LPEN (1U << RCC_APB2LPENR_TIM9LPEN_BIT) +#define RCC_APB2LPENR_SYSCFGLPEN (1U << RCC_APB2LPENR_SYSCFGLPEN_BIT) +#define RCC_APB2LPENR_SPI1LPEN (1U << RCC_APB2LPENR_SPI1LPEN_BIT) +#define RCC_APB2LPENR_SDIOLPEN (1U << RCC_APB2LPENR_SDIOLPEN_BIT) +#define RCC_APB2LPENR_ADC3LPEN (1U << RCC_APB2LPENR_ADC3LPEN_BIT) +#define RCC_APB2LPENR_ADC2LPEN (1U << RCC_APB2LPENR_ADC2LPEN_BIT) +#define RCC_APB2LPENR_ADC1LPEN (1U << RCC_APB2LPENR_ADC1LPEN_BIT) +#define RCC_APB2LPENR_USART6LPEN (1U << RCC_APB2LPENR_USART6LPEN_BIT) +#define RCC_APB2LPENR_USART1LPEN (1U << RCC_APB2LPENR_USART1LPEN_BIT) +#define RCC_APB2LPENR_TIM8LPEN (1U << RCC_APB2LPENR_TIM8LPEN_BIT) +#define RCC_APB2LPENR_TIM1LPEN (1U << RCC_APB2LPENR_TIM1LPEN_BIT) + +/* Backup domain control register */ + +#define RCC_BDCR_BDRST_BIT 16 +#define RCC_BDCR_RTCEN_BIT 15 +#define RCC_BDCR_LSEBYP_BIT 2 +#define RCC_BDCR_LSERDY_BIT 1 +#define RCC_BDCR_LSEON_BIT 0 + +#define RCC_BDCR_BDRST (1U << RCC_BDCR_BDRST_BIT) +#define RCC_BDCR_RTCEN (1U << RCC_BDCR_RTCEN_BIT) +#define RCC_BDCR_RTCSEL (0x3 << 8) +#define RCC_BDCR_RTCSEL_NOCLOCK (0x0 << 8) +#define RCC_BDCR_RTCSEL_LSE (0x1 << 8) +#define RCC_BDCR_RTCSEL_LSI (0x2 << 8) +#define RCC_BDCR_RTCSEL_HSE_DIV (0x3 << 8) +#define RCC_BDCR_LSEBYP (1U << RCC_BDCR_LSEBYP_BIT) +#define RCC_BDCR_LSERDY (1U << RCC_BDCR_LSERDY_BIT) +#define RCC_BDCR_LSEON (1U << RCC_BDCR_LSEON_BIT) + +/* Clock control and status register */ + +#define RCC_CSR_LPWRRSTF_BIT 31 +#define RCC_CSR_WWDGRSTF_BIT 30 +#define RCC_CSR_IWDGRSTF_BIT 29 +#define RCC_CSR_SFTRSTF_BIT 28 +#define RCC_CSR_PORRSTF_BIT 27 +#define RCC_CSR_PINRSTF_BIT 26 +#define RCC_CSR_BORRSTF_BIT 25 +#define RCC_CSR_RMVF_BIT 24 +#define RCC_CSR_LSIRDY_BIT 1 +#define RCC_CSR_LSION_BIT 0 + +#define RCC_CSR_LPWRRSTF (1U << RCC_CSR_LPWRRSTF_BIT) +#define RCC_CSR_WWDGRSTF (1U << RCC_CSR_WWDGRSTF_BIT) +#define RCC_CSR_IWDGRSTF (1U << RCC_CSR_IWDGRSTF_BIT) +#define RCC_CSR_SFTRSTF (1U << RCC_CSR_SFTRSTF_BIT) +#define RCC_CSR_PORRSTF (1U << RCC_CSR_PORRSTF_BIT) +#define RCC_CSR_PINRSTF (1U << RCC_CSR_PINRSTF_BIT) +#define RCC_CSR_BORRSTF (1U << RCC_CSR_BORRSTF_BIT) +#define RCC_CSR_RMVF (1U << RCC_CSR_RMVF_BIT) +#define RCC_CSR_LSIRDY (1U << RCC_CSR_LSIRDY_BIT) +#define RCC_CSR_LSION (1U << RCC_CSR_LSION_BIT) + +/* Spread spectrum clock generation register */ + +#define RCC_SSCGR_SSCGEN_BIT 31 +#define RCC_SSCGR_SPREADSEL_BIT 30 + +#define RCC_SSCGR_SSCGEN (1U << RCC_SSCGR_SSCGEN_BIT) +#define RCC_SSCGR_SPREADSEL (1U << RCC_SSCGR_SPREADSEL_BIT) +#define RCC_SSCGR_SPREADSEL_CENTER (0x0 << RCC_SSCGR_SPREADSEL_BIT) +#define RCC_SSCGR_SPREADSEL_DOWN (0x1 << RCC_SSCGR_SPREADSEL_BIT) +#define RCC_SSCGR_INCSTEP (0xFFF << 16) +#define RCC_SSCGR_MODPER 0xFFFF + +/* PLLI2S configuration register */ + +#define RCC_PLLI2SCFGR_PLLI2SR (0x7 << 28) +#define RCC_PLLI2SCFGR_PLLI2SN (0x1FF << 6) + +/* + * Clock sources, domains, and peripheral clock IDs. + */ + +/** + * @brief STM32F2 clock sources. + */ +typedef enum rcc_clk { + RCC_CLK_PLLI2S = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_PLLI2SON_BIT), /**< Dedicated PLL + for I2S. */ + RCC_CLK_PLL = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_PLLON_BIT), /**< Main PLL, clocked by + HSI or HSE. */ + RCC_CLK_HSE = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_HSEON_BIT), /**< High speed external. */ + RCC_CLK_HSI = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_HSION_BIT), /**< High speed internal. */ + RCC_CLK_LSE = (uint16)((offsetof(struct rcc_reg_map, BDCR) << 8) | + RCC_BDCR_LSEON_BIT), /**< Low-speed external + * (32.768 KHz). */ + RCC_CLK_LSI = (uint16)((offsetof(struct rcc_reg_map, CSR) << 8) | + RCC_CSR_LSION_BIT), /**< Low-speed internal + * (approximately 32 KHz). */ +} rcc_clk; + +/** + * @brief STM32F2 rcc_clk_id. + */ +typedef enum rcc_clk_id { + RCC_ADC1, + RCC_ADC2, + RCC_ADC3, + RCC_BKPSRAM, + RCC_CAN1, + RCC_CAN2, + RCC_CRC, + RCC_CRYP, + RCC_DAC, + RCC_DCMI, + RCC_DMA1, + RCC_DMA2, + RCC_ETHMAC, + RCC_ETHMACPTP, + RCC_ETHMACRX, + RCC_ETHMACTX, + RCC_FSMC, + RCC_GPIOA, + RCC_GPIOB, + RCC_GPIOC, + RCC_GPIOD, + RCC_GPIOE, + RCC_GPIOF, + RCC_GPIOG, + RCC_GPIOH, + RCC_GPIOI, + RCC_HASH, + RCC_I2C1, + RCC_I2C2, + RCC_I2C3, + RCC_OTGFS, + RCC_OTGHS, + RCC_OTGHSULPI, + RCC_PWR, + RCC_RNG, + RCC_SDIO, + RCC_SPI1, + RCC_SPI2, + RCC_SPI3, + RCC_SYSCFG, + RCC_TIMER1, + RCC_TIMER10, + RCC_TIMER11, + RCC_TIMER12, + RCC_TIMER13, + RCC_TIMER14, + RCC_TIMER2, + RCC_TIMER3, + RCC_TIMER4, + RCC_TIMER5, + RCC_TIMER6, + RCC_TIMER7, + RCC_TIMER8, + RCC_TIMER9, + RCC_USART1, + RCC_USART2, + RCC_USART3, + RCC_UART4, + RCC_UART5, + RCC_USART6, + RCC_WWDG, +} rcc_clk_id; + +/** + * @brief STM32F2 PLL entry clock source + * @see rcc_configure_pll() + */ +typedef enum rcc_pllsrc { + RCC_PLLSRC_HSI = 0, + RCC_PLLSRC_HSE = RCC_PLLCFGR_PLLSRC, +} rcc_pllsrc; + +/** + * @brief STM32F2 Peripheral clock domains. + */ +typedef enum rcc_clk_domain { + RCC_APB1, + RCC_APB2, + RCC_AHB1, + RCC_AHB2, + RCC_AHB3, +} rcc_clk_domain; + +/* + * Prescalers and dividers. + */ + +/** + * @brief STM32F2 Prescaler identifiers. + */ +typedef enum rcc_prescaler { + RCC_PRESCALER_MCO2, + RCC_PRESCALER_MCO1, + RCC_PRESCALER_RTC, + RCC_PRESCALER_APB2, + RCC_PRESCALER_APB1, + RCC_PRESCALER_AHB +} rcc_prescaler; + +/** + * @brief STM32F2 MCO2 prescaler dividers. + */ +typedef enum rcc_mco2_divider { + RCC_MCO2_DIV_1 = RCC_CFGR_MCO2PRE_DIV_1, + RCC_MCO2_DIV_2 = RCC_CFGR_MCO2PRE_DIV_2, + RCC_MCO2_DIV_3 = RCC_CFGR_MCO2PRE_DIV_3, + RCC_MCO2_DIV_4 = RCC_CFGR_MCO2PRE_DIV_4, + RCC_MCO2_DIV_5 = RCC_CFGR_MCO2PRE_DIV_5, +} rcc_mco2_divider; + +/** + * @brief STM32F2 MCO1 prescaler dividers. + */ +typedef enum rcc_mco1_divider { + RCC_MCO1_DIV_1 = RCC_CFGR_MCO1PRE_DIV_1, + RCC_MCO1_DIV_2 = RCC_CFGR_MCO1PRE_DIV_2, + RCC_MCO1_DIV_3 = RCC_CFGR_MCO1PRE_DIV_3, + RCC_MCO1_DIV_4 = RCC_CFGR_MCO1PRE_DIV_4, + RCC_MCO1_DIV_5 = RCC_CFGR_MCO1PRE_DIV_5, +} rcc_mco1_divider; + +/** + * @brief STM32F2 RTC prescaler dividers. + */ +typedef enum rcc_rtc_divider { /* FIXME [0.0.13] TODO */ + RCC_RTC_DIV_TODO = 0xFFFFFFFF, +} rcc_rtc_divider; + +/** + * @brief STM32F2 AP2 prescaler dividers. + */ +typedef enum rcc_apb2_divider { + RCC_APB2_HCLK_DIV_1 = 0, + RCC_APB2_HCLK_DIV_2 = RCC_CFGR_PPRE2_AHB_DIV_2, + RCC_APB2_HCLK_DIV_4 = RCC_CFGR_PPRE2_AHB_DIV_4, + RCC_APB2_HCLK_DIV_8 = RCC_CFGR_PPRE2_AHB_DIV_8, + RCC_APB2_HCLK_DIV_16 = RCC_CFGR_PPRE2_AHB_DIV_16, +} rcc_apb2_divider; + +/** + * @brief STM32F2 APB1 prescaler dividers. + */ +typedef enum rcc_apb1_divider { + RCC_APB1_HCLK_DIV_1 = 0, + RCC_APB1_HCLK_DIV_2 = RCC_CFGR_PPRE1_AHB_DIV_2, + RCC_APB1_HCLK_DIV_4 = RCC_CFGR_PPRE1_AHB_DIV_4, + RCC_APB1_HCLK_DIV_8 = RCC_CFGR_PPRE1_AHB_DIV_8, + RCC_APB1_HCLK_DIV_16 = RCC_CFGR_PPRE1_AHB_DIV_16, +} rcc_apb1_divider; + +/** + * @brief STM32F2 AHB prescaler dividers. + */ +typedef enum rcc_ahb_divider { + RCC_AHB_SYSCLK_DIV_1 = 0, + RCC_AHB_SYSCLK_DIV_2 = RCC_CFGR_HPRE_SYSCLK_DIV_2, + RCC_AHB_SYSCLK_DIV_4 = RCC_CFGR_HPRE_SYSCLK_DIV_4, + RCC_AHB_SYSCLK_DIV_8 = RCC_CFGR_HPRE_SYSCLK_DIV_8, + RCC_AHB_SYSCLK_DIV_16 = RCC_CFGR_HPRE_SYSCLK_DIV_16, + RCC_AHB_SYSCLK_DIV_64 = RCC_CFGR_HPRE_SYSCLK_DIV_64, + RCC_AHB_SYSCLK_DIV_128 = RCC_CFGR_HPRE_SYSCLK_DIV_128, + RCC_AHB_SYSCLK_DIV_256 = RCC_CFGR_HPRE_SYSCLK_DIV_256, + RCC_AHB_SYSCLK_DIV_512 = RCC_CFGR_HPRE_SYSCLK_DIV_512, +} rcc_ahb_divider; + +/** + * @brief STM32F2 PLL configuration values. + * Point to one of these with the "data" field in a struct rcc_pll_cfg. + * @see struct rcc_pll_cfg. + */ +typedef struct stm32f2_rcc_pll_data { + uint8 pllq; /**< + * @brief PLLQ value. + * Allowed values: 4, 5, ..., 15. */ + uint8 pllp; /**< + * @brief PLLP value. + * Allowed values: 2, 4, 6, 8. */ + uint16 plln; /**< + * @brief PLLN value. + * Allowed values: 192, 193, ..., 432. */ + uint8 pllm; /**< + * @brief PLLM value. + * Allowed values: 2, 3, ..., 63. */ +} stm32f2_rcc_pll_data; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/spi.h b/libmaple/stm32f2/include/series/spi.h new file mode 100644 index 0000000..7b9f94a --- /dev/null +++ b/libmaple/stm32f2/include/series/spi.h @@ -0,0 +1,88 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/spi.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 SPI/I2S series header. + */ + +#ifndef _LIBMAPLE_STM32F2_SPI_H_ +#define _LIBMAPLE_STM32F2_SPI_H_ + +#include <libmaple/gpio.h> /* for gpio_af */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Register map base pointers + */ + +struct spi_reg_map; + +#define SPI1_BASE ((struct spi_reg_map*)0x40013000) +#define SPI2_BASE ((struct spi_reg_map*)0x40003800) +#define SPI3_BASE ((struct spi_reg_map*)0x40003C00) + +/* + * Register bit definitions + */ + +/* Control register 2 */ + +#define SPI_CR2_FRF_BIT 4 + +#define SPI_CR2_FRF (1U << SPI_CR2_FRF_BIT) + +/* Status register */ + +#define SPI_SR_TIFRFE_BIT 8 + +#define SPI_SR_TIFRFE (1U << SPI_SR_TIFRFE_BIT) + +/* + * Device pointers + */ + +struct spi_dev; + +extern struct spi_dev *SPI1; +extern struct spi_dev *SPI2; +extern struct spi_dev *SPI3; + +/* + * Routines + */ + +gpio_af spi_get_af(struct spi_dev *dev); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/stm32.h b/libmaple/stm32f2/include/series/stm32.h new file mode 100644 index 0000000..180ab30 --- /dev/null +++ b/libmaple/stm32f2/include/series/stm32.h @@ -0,0 +1,77 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/stm32.h + * @brief STM32F2 chip- and series-specific definitions. + */ + +#ifndef _LIBMAPLE_STM32F2_STM32_H_ +#define _LIBMAPLE_STM32F2_STM32_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Chip configuration + */ + +#ifndef STM32_PCLK1 +#define STM32_PCLK1 30000000U +#endif + +#ifndef STM32_PCLK2 +#define STM32_PCLK2 60000000U +#endif + +#ifndef STM32_DELAY_US_MULT +#define STM32_DELAY_US_MULT 20 /* FIXME: dummy value. */ +#endif + +/* + * Series- and MCU-specific values + */ + +#define STM32_MCU_SERIES STM32_SERIES_F2 +#define STM32_NR_INTERRUPTS 81 +#define STM32_HAVE_FSMC 1 +#define STM32_HAVE_USB 1 +#define STM32_HAVE_DAC 1 + +#if defined(MCU_STM32F207IC) || defined(MCU_STM32F207IG) +# define STM32_NR_GPIO_PORTS 9 +# define STM32_TIMER_MASK 0x7FFE /* TIMER1-TIMER14. */ +# define STM32_SRAM_END ((void*)0x20020000) +#else +#warning "Unsupported or unspecified STM32F2 MCU." +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/include/series/timer.h b/libmaple/stm32f2/include/series/timer.h new file mode 100644 index 0000000..a7ac276 --- /dev/null +++ b/libmaple/stm32f2/include/series/timer.h @@ -0,0 +1,176 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011,2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/timer.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 timer support. + */ + +#ifndef _LIBMAPLE_STM32F2_TIMER_H_ +#define _LIBMAPLE_STM32F2_TIMER_H_ + +#include <libmaple/libmaple_types.h> +#include <libmaple/gpio.h> /* for gpio_af */ + +/* + * Register maps and base pointers + */ + +/** + * @brief STM32F2 general purpose timer register map type + * + * Note that not all general purpose timers have all of these + * registers. Consult your chip's reference manual for the details. + */ +typedef struct timer_gen_reg_map { + __io uint32 CR1; /**< Control register 1 */ + __io uint32 CR2; /**< Control register 2 */ + __io uint32 SMCR; /**< Slave mode control register */ + __io uint32 DIER; /**< DMA/Interrupt enable register */ + __io uint32 SR; /**< Status register */ + __io uint32 EGR; /**< Event generation register */ + __io uint32 CCMR1; /**< Capture/compare mode register 1 */ + __io uint32 CCMR2; /**< Capture/compare mode register 2 */ + __io uint32 CCER; /**< Capture/compare enable register */ + __io uint32 CNT; /**< Counter */ + __io uint32 PSC; /**< Prescaler */ + __io uint32 ARR; /**< Auto-reload register */ + const uint32 RESERVED1; /**< Reserved */ + __io uint32 CCR1; /**< Capture/compare register 1 */ + __io uint32 CCR2; /**< Capture/compare register 2 */ + __io uint32 CCR3; /**< Capture/compare register 3 */ + __io uint32 CCR4; /**< Capture/compare register 4 */ + const uint32 RESERVED2; /**< Reserved */ + __io uint32 DCR; /**< DMA control register */ + __io uint32 DMAR; /**< DMA address for full transfer */ + __io uint32 OR; /**< Option register. */ +} timer_gen_reg_map; + +struct timer_adv_reg_map; +struct timer_bas_reg_map; + +/** Timer 1 register map base pointer */ +#define TIMER1_BASE ((struct timer_adv_reg_map*)0x40010000) +/** Timer 2 register map base pointer */ +#define TIMER2_BASE ((struct timer_gen_reg_map*)0x40000000) +/** Timer 3 register map base pointer */ +#define TIMER3_BASE ((struct timer_gen_reg_map*)0x40000400) +/** Timer 4 register map base pointer */ +#define TIMER4_BASE ((struct timer_gen_reg_map*)0x40000800) +/** Timer 5 register map base pointer */ +#define TIMER5_BASE ((struct timer_gen_reg_map*)0x40000C00) +/** Timer 6 register map base pointer */ +#define TIMER6_BASE ((struct timer_bas_reg_map*)0x40001000) +/** Timer 7 register map base pointer */ +#define TIMER7_BASE ((struct timer_bas_reg_map*)0x40001400) +/** Timer 8 register map base pointer */ +#define TIMER8_BASE ((struct timer_adv_reg_map*)0x40010400) +/** Timer 9 register map base pointer */ +#define TIMER9_BASE ((struct timer_gen_reg_map*)0x40014000) +/** Timer 10 register map base pointer */ +#define TIMER10_BASE ((struct timer_gen_reg_map*)0x40014400) +/** Timer 11 register map base pointer */ +#define TIMER11_BASE ((struct timer_gen_reg_map*)0x40014800) +/** Timer 12 register map base pointer */ +#define TIMER12_BASE ((struct timer_gen_reg_map*)0x40001800) +/** Timer 13 register map base pointer */ +#define TIMER13_BASE ((struct timer_gen_reg_map*)0x40001C00) +/** Timer 14 register map base pointer */ +#define TIMER14_BASE ((struct timer_gen_reg_map*)0x40002000) + +/* + * Register bit definitions + */ + +/* TIM2 option register */ + +/** Timer 2 option register internal trigger 1 remap */ +#define TIMER2_OR_ITR1_RMP (0x3 << 10) +/** Timer 2 OR internal trigger 1: TIM8_TRGOUT */ +#define TIMER2_OR_ITR1_RMP_TIM8_TRGOUT (0x0 << 10) +/** Timer 2 OR internal trigger 1: Ethernet PTP trigger output */ +#define TIMER2_OR_ITR1_RMP_PTP_TRGOUT (0x1 << 10) +/** Timer 2 OR internal trigger 1: USB OTG full speed start of frame */ +#define TIMER2_OR_ITR1_RMP_OTG_FS_SOF (0x2 << 10) +/** Timer 2 OR internal trigger 1: USB OTG high speed start of frame */ +#define TIMER2_OR_ITR1_RMP_OTG_HS_SOF (0x3 << 10) + +/* TIM5 option register */ + +/** + * Timer 5 option register input 4 remap. + * + * These bits control whether TIM5_CH4 is connected to a GPIO or a + * clock. Connecting to a GPIO is the normal mode, useful for e.g. PWM + * generation or input pulse duration measurement. Connecting to a + * clock is useful for calibrating that clock. + */ +#define TIMER5_OR_TI4_RMP (0x3 << 6) +/** + * Timer 5 OR input 4: Timer 5 channel 4 connected to GPIO. */ +#define TIMER5_OR_TI4_RMP_GPIO (0x0 << 6) +/** + * Timer 5 OR input 4: low speed internal clock (LSI) is connected to + * TIM5_CH4. */ +#define TIMER5_OR_TI4_RMP_LSI (0x1 << 6) +/** + * Timer 5 OR input 4: low speed external clock (LSE) is connected to + * TIM5_CH4. */ +#define TIMER5_OR_TI4_RMP_LSE (0x2 << 6) +/** + * Timer 5 OR input 4: real time clock (RTC) output is connected to + * TIM5_CH4. */ +#define TIMER5_OR_TI4_RMP_RTC (0x3 << 6) + +/* + * Device pointers + */ + +struct timer_dev; + +extern struct timer_dev *TIMER1; +extern struct timer_dev *TIMER2; +extern struct timer_dev *TIMER3; +extern struct timer_dev *TIMER4; +extern struct timer_dev *TIMER5; +extern struct timer_dev *TIMER6; +extern struct timer_dev *TIMER7; +extern struct timer_dev *TIMER8; +extern struct timer_dev *TIMER9; +extern struct timer_dev *TIMER10; +extern struct timer_dev *TIMER11; +extern struct timer_dev *TIMER12; +extern struct timer_dev *TIMER13; +extern struct timer_dev *TIMER14; + +/* + * Routines + */ + +gpio_af timer_get_af(struct timer_dev *dev); + +#endif diff --git a/libmaple/stm32f2/include/series/usart.h b/libmaple/stm32f2/include/series/usart.h new file mode 100644 index 0000000..8936efa --- /dev/null +++ b/libmaple/stm32f2/include/series/usart.h @@ -0,0 +1,111 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/include/series/usart.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 USART support. + */ + +#ifndef _LIBMAPLE_STM32F2_USART_H_ +#define _LIBMAPLE_STM32F2_USART_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/gpio.h> /* for gpio_af */ + +/* + * Register map base pointers. + */ + +struct usart_reg_map; + +/** USART1 register map base pointer */ +#define USART1_BASE ((struct usart_reg_map*)0x40011000) +/** USART2 register map base pointer */ +#define USART2_BASE ((struct usart_reg_map*)0x40004400) +/** USART3 register map base pointer */ +#define USART3_BASE ((struct usart_reg_map*)0x40004800) +/** UART4 register map base pointer */ +#define UART4_BASE ((struct usart_reg_map*)0x40004C00) +/** UART5 register map base pointer */ +#define UART5_BASE ((struct usart_reg_map*)0x40005000) +/** USART6 register map base pointer */ +#define USART6_BASE ((struct usart_reg_map*)0x40011400) + +/* + * F2-only register bit definitions. + */ + +/* Control register 1 */ + +/** + * @brief Oversampling mode bit. + * Availability: STM32F2. */ +#define USART_CR1_OVER8_BIT 15 + +/** + * @brief Oversampling mode. + * Availability: STM32F2. */ +#define USART_CR1_OVER8 (1U << USART_CR1_OVER8_BIT) + +/* Control register 3 */ + +/** One sample bit method enable bit. */ +#define USART_CR3_ONEBIT_BIT 11 + +/** One bit sample method enable. */ +#define USART_CR3_ONEBIT (1 << USART_CR3_ONEBIT_BIT) +/** Sample method: Three sample bit method. */ +#define USART_CR3_ONEBIT_3SAMPLE (0 << USART_CR3_ONEBIT_BIT) +/** Sample method: One sample bit method. */ +#define USART_CR3_ONEBIT_1SAMPLE (1 << USART_CR3_ONEBIT_BIT) + +/* + * Devices + */ + +struct usart_dev; +extern struct usart_dev *USART1; +extern struct usart_dev *USART2; +extern struct usart_dev *USART3; +extern struct usart_dev *UART4; +extern struct usart_dev *UART5; +extern struct usart_dev *USART6; + +/* + * Routines + */ + +gpio_af usart_get_af(struct usart_dev *dev); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/isrs.S b/libmaple/stm32f2/isrs.S new file mode 100644 index 0000000..5baaf8b --- /dev/null +++ b/libmaple/stm32f2/isrs.S @@ -0,0 +1,322 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/* STM32F2 ISR weak declarations */ + + .thumb + +/* Default handler, as with STM32F1 */ + .globl __default_handler + .type __default_handler, %function + +__default_handler: + b . + + .weak __exc_nmi + .globl __exc_nmi + .set __exc_nmi, __default_handler + .weak __exc_hardfault + .globl __exc_hardfault + .set __exc_hardfault, __default_handler + .weak __exc_memmanage + .globl __exc_memmanage + .set __exc_memmanage, __default_handler + .weak __exc_busfault + .globl __exc_busfault + .set __exc_busfault, __default_handler + .weak __exc_usagefault + .globl __exc_usagefault + .set __exc_usagefault, __default_handler + .weak __stm32reservedexception7 + .globl __stm32reservedexception7 + .set __stm32reservedexception7, __default_handler + .weak __stm32reservedexception8 + .globl __stm32reservedexception8 + .set __stm32reservedexception8, __default_handler + .weak __stm32reservedexception9 + .globl __stm32reservedexception9 + .set __stm32reservedexception9, __default_handler + .weak __stm32reservedexception10 + .globl __stm32reservedexception10 + .set __stm32reservedexception10, __default_handler + .weak __exc_svc + .globl __exc_svc + .set __exc_svc, __default_handler + .weak __exc_debug_monitor + .globl __exc_debug_monitor + .set __exc_debug_monitor, __default_handler + .weak __stm32reservedexception13 + .globl __stm32reservedexception13 + .set __stm32reservedexception13, __default_handler + .weak __exc_pendsv + .globl __exc_pendsv + .set __exc_pendsv, __default_handler + .weak __exc_systick + .globl __exc_systick + .set __exc_systick, __default_handler + .weak __irq_wwdg + .globl __irq_wwdg + .set __irq_wwdg, __default_handler + .weak __irq_pvd + .globl __irq_pvd + .set __irq_pvd, __default_handler + .weak __irq_tamp_stamp + .globl __irq_tamp_stamp + .set __irq_tamp_stamp, __default_handler + .weak __irq_rtc_wkup + .globl __irq_rtc_wkup + .set __irq_rtc_wkup, __default_handler + .weak __irq_flash + .globl __irq_flash + .set __irq_flash, __default_handler + .weak __irq_rcc + .globl __irq_rcc + .set __irq_rcc, __default_handler + .weak __irq_exti0 + .globl __irq_exti0 + .set __irq_exti0, __default_handler + .weak __irq_exti1 + .globl __irq_exti1 + .set __irq_exti1, __default_handler + .weak __irq_exti2 + .globl __irq_exti2 + .set __irq_exti2, __default_handler + .weak __irq_exti3 + .globl __irq_exti3 + .set __irq_exti3, __default_handler + .weak __irq_exti4 + .globl __irq_exti4 + .set __irq_exti4, __default_handler + .weak __irq_dma1_stream0 + .globl __irq_dma1_stream0 + .set __irq_dma1_stream0, __default_handler + .weak __irq_dma1_stream1 + .globl __irq_dma1_stream1 + .set __irq_dma1_stream1, __default_handler + .weak __irq_dma1_stream2 + .globl __irq_dma1_stream2 + .set __irq_dma1_stream2, __default_handler + .weak __irq_dma1_stream3 + .globl __irq_dma1_stream3 + .set __irq_dma1_stream3, __default_handler + .weak __irq_dma1_stream4 + .globl __irq_dma1_stream4 + .set __irq_dma1_stream4, __default_handler + .weak __irq_dma1_stream5 + .globl __irq_dma1_stream5 + .set __irq_dma1_stream5, __default_handler + .weak __irq_dma1_stream6 + .globl __irq_dma1_stream6 + .set __irq_dma1_stream6, __default_handler + .weak __irq_adc + .globl __irq_adc + .set __irq_adc, __default_handler + .weak __irq_can1_tx + .globl __irq_can1_tx + .set __irq_can1_tx, __default_handler + .weak __irq_can1_rx0 + .globl __irq_can1_rx0 + .set __irq_can1_rx0, __default_handler + .weak __irq_can1_rx1 + .globl __irq_can1_rx1 + .set __irq_can1_rx1, __default_handler + .weak __irq_can1_sce + .globl __irq_can1_sce + .set __irq_can1_sce, __default_handler + .weak __irq_exti9_5 + .globl __irq_exti9_5 + .set __irq_exti9_5, __default_handler + .weak __irq_tim1_brk_tim9 + .globl __irq_tim1_brk_tim9 + .set __irq_tim1_brk_tim9, __default_handler + .weak __irq_tim1_up_tim10 + .globl __irq_tim1_up_tim10 + .set __irq_tim1_up_tim10, __default_handler + .weak __irq_tim1_trg_com_tim11 + .globl __irq_tim1_trg_com_tim11 + .set __irq_tim1_trg_com_tim11, __default_handler + .weak __irq_tim1_cc + .globl __irq_tim1_cc + .set __irq_tim1_cc, __default_handler + .weak __irq_tim2 + .globl __irq_tim2 + .set __irq_tim2, __default_handler + .weak __irq_tim3 + .globl __irq_tim3 + .set __irq_tim3, __default_handler + .weak __irq_tim4 + .globl __irq_tim4 + .set __irq_tim4, __default_handler + .weak __irq_i2c1_ev + .globl __irq_i2c1_ev + .set __irq_i2c1_ev, __default_handler + .weak __irq_i2c1_er + .globl __irq_i2c1_er + .set __irq_i2c1_er, __default_handler + .weak __irq_i2c2_ev + .globl __irq_i2c2_ev + .set __irq_i2c2_ev, __default_handler + .weak __irq_i2c2_er + .globl __irq_i2c2_er + .set __irq_i2c2_er, __default_handler + .weak __irq_spi1 + .globl __irq_spi1 + .set __irq_spi1, __default_handler + .weak __irq_spi2 + .globl __irq_spi2 + .set __irq_spi2, __default_handler + .weak __irq_usart1 + .globl __irq_usart1 + .set __irq_usart1, __default_handler + .weak __irq_usart2 + .globl __irq_usart2 + .set __irq_usart2, __default_handler + .weak __irq_usart3 + .globl __irq_usart3 + .set __irq_usart3, __default_handler + .weak __irq_exti15_10 + .globl __irq_exti15_10 + .set __irq_exti15_10, __default_handler + .weak __irq_rtc_alarm + .globl __irq_rtc_alarm + .set __irq_rtc_alarm, __default_handler + .weak __irq_otg_fs_wkup + .globl __irq_otg_fs_wkup + .set __irq_otg_fs_wkup, __default_handler + .weak __irq_tim8_brk_tim12 + .globl __irq_tim8_brk_tim12 + .set __irq_tim8_brk_tim12, __default_handler + .weak __irq_tim8_up_tim13 + .globl __irq_tim8_up_tim13 + .set __irq_tim8_up_tim13, __default_handler + .weak __irq_tim8_trg_com_tim14 + .globl __irq_tim8_trg_com_tim14 + .set __irq_tim8_trg_com_tim14, __default_handler + .weak __irq_tim8_cc + .globl __irq_tim8_cc + .set __irq_tim8_cc, __default_handler + .weak __irq_dma1_stream7 + .globl __irq_dma1_stream7 + .set __irq_dma1_stream7, __default_handler + .weak __irq_fsmc + .globl __irq_fsmc + .set __irq_fsmc, __default_handler + .weak __irq_sdio + .globl __irq_sdio + .set __irq_sdio, __default_handler + .weak __irq_tim5 + .globl __irq_tim5 + .set __irq_tim5, __default_handler + .weak __irq_spi3 + .globl __irq_spi3 + .set __irq_spi3, __default_handler + .weak __irq_uart4 + .globl __irq_uart4 + .set __irq_uart4, __default_handler + .weak __irq_uart5 + .globl __irq_uart5 + .set __irq_uart5, __default_handler + .weak __irq_tim6_dac + .globl __irq_tim6_dac + .set __irq_tim6_dac, __default_handler + .weak __irq_tim7 + .globl __irq_tim7 + .set __irq_tim7, __default_handler + .weak __irq_dma2_stream0 + .globl __irq_dma2_stream0 + .set __irq_dma2_stream0, __default_handler + .weak __irq_dma2_stream1 + .globl __irq_dma2_stream1 + .set __irq_dma2_stream1, __default_handler + .weak __irq_dma2_stream2 + .globl __irq_dma2_stream2 + .set __irq_dma2_stream2, __default_handler + .weak __irq_dma2_stream3 + .globl __irq_dma2_stream3 + .set __irq_dma2_stream3, __default_handler + .weak __irq_dma2_stream4 + .globl __irq_dma2_stream4 + .set __irq_dma2_stream4, __default_handler + .weak __irq_eth + .globl __irq_eth + .set __irq_eth, __default_handler + .weak __irq_eth_wkup + .globl __irq_eth_wkup + .set __irq_eth_wkup, __default_handler + .weak __irq_can2_tx + .globl __irq_can2_tx + .set __irq_can2_tx, __default_handler + .weak __irq_can2_rx0 + .globl __irq_can2_rx0 + .set __irq_can2_rx0, __default_handler + .weak __irq_can2_rx1 + .globl __irq_can2_rx1 + .set __irq_can2_rx1, __default_handler + .weak __irq_can2_sce + .globl __irq_can2_sce + .set __irq_can2_sce, __default_handler + .weak __irq_otg_fs + .globl __irq_otg_fs + .set __irq_otg_fs, __default_handler + .weak __irq_dma2_stream5 + .globl __irq_dma2_stream5 + .set __irq_dma2_stream5, __default_handler + .weak __irq_dma2_stream6 + .globl __irq_dma2_stream6 + .set __irq_dma2_stream6, __default_handler + .weak __irq_dma2_stream7 + .globl __irq_dma2_stream7 + .set __irq_dma2_stream7, __default_handler + .weak __irq_usart6 + .globl __irq_usart6 + .set __irq_usart6, __default_handler + .weak __irq_i2c3_ev + .globl __irq_i2c3_ev + .set __irq_i2c3_ev, __default_handler + .weak __irq_i2c3_er + .globl __irq_i2c3_er + .set __irq_i2c3_er, __default_handler + .weak __irq_otg_hs_ep1_out + .globl __irq_otg_hs_ep1_out + .set __irq_otg_hs_ep1_out, __default_handler + .weak __irq_otg_hs_ep1_in + .globl __irq_otg_hs_ep1_in + .set __irq_otg_hs_ep1_in, __default_handler + .weak __irq_otg_hs_wkup + .globl __irq_otg_hs_wkup + .set __irq_otg_hs_wkup, __default_handler + .weak __irq_otg_hs + .globl __irq_otg_hs + .set __irq_otg_hs, __default_handler + .weak __irq_dcmi + .globl __irq_dcmi + .set __irq_dcmi, __default_handler + .weak __irq_cryp + .globl __irq_cryp + .set __irq_cryp, __default_handler + .weak __irq_hash_rng + .globl __irq_hash_rng + .set __irq_hash_rng, __default_handler diff --git a/libmaple/stm32f2/rcc.c b/libmaple/stm32f2/rcc.c new file mode 100644 index 0000000..7fc7eb0 --- /dev/null +++ b/libmaple/stm32f2/rcc.c @@ -0,0 +1,175 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/rcc.c + * @brief STM32F2 RCC. + */ + +#include <libmaple/rcc.h> +#include <libmaple/libmaple.h> + +#include "rcc_private.h" + +#define DEV_ENTRY(domain, dev) \ + {.clk_domain = RCC_##domain, .line_num = RCC_##domain##ENR_##dev##EN_BIT} + +const struct rcc_dev_info rcc_dev_table[] = { + /* AHB1 */ + [RCC_OTGHSULPI] = DEV_ENTRY(AHB1, OTGHSULPI), + [RCC_OTGHS] = DEV_ENTRY(AHB1, OTGHS), + [RCC_ETHMACPTP] = DEV_ENTRY(AHB1, ETHMACPTP), + [RCC_ETHMACRX] = DEV_ENTRY(AHB1, ETHMACRX), + [RCC_ETHMACTX] = DEV_ENTRY(AHB1, ETHMACTX), + [RCC_ETHMAC] = DEV_ENTRY(AHB1, ETHMAC), + [RCC_DMA2] = DEV_ENTRY(AHB1, DMA2), + [RCC_DMA1] = DEV_ENTRY(AHB1, DMA1), + [RCC_BKPSRAM] = DEV_ENTRY(AHB1, BKPSRAM), + [RCC_CRC] = DEV_ENTRY(AHB1, CRC), + [RCC_GPIOI] = DEV_ENTRY(AHB1, GPIOI), + [RCC_GPIOH] = DEV_ENTRY(AHB1, GPIOH), + [RCC_GPIOG] = DEV_ENTRY(AHB1, GPIOG), + [RCC_GPIOF] = DEV_ENTRY(AHB1, GPIOF), + [RCC_GPIOE] = DEV_ENTRY(AHB1, GPIOE), + [RCC_GPIOD] = DEV_ENTRY(AHB1, GPIOD), + [RCC_GPIOC] = DEV_ENTRY(AHB1, GPIOC), + [RCC_GPIOB] = DEV_ENTRY(AHB1, GPIOB), + [RCC_GPIOA] = DEV_ENTRY(AHB1, GPIOA), + + /* AHB2 */ + [RCC_OTGFS] = DEV_ENTRY(AHB2, OTGFS), + [RCC_RNG] = DEV_ENTRY(AHB2, RNG), + [RCC_HASH] = DEV_ENTRY(AHB2, HASH), + [RCC_CRYP] = DEV_ENTRY(AHB2, CRYP), + [RCC_DCMI] = DEV_ENTRY(AHB2, DCMI), + + /* AHB3 */ + [RCC_FSMC] = DEV_ENTRY(AHB3, FSMC), + + /* APB1 */ + [RCC_DAC] = DEV_ENTRY(APB1, DAC), + [RCC_PWR] = DEV_ENTRY(APB1, PWR), + [RCC_CAN2] = DEV_ENTRY(APB1, CAN2), + [RCC_CAN1] = DEV_ENTRY(APB1, CAN1), + [RCC_I2C3] = DEV_ENTRY(APB1, I2C3), + [RCC_I2C2] = DEV_ENTRY(APB1, I2C2), + [RCC_I2C1] = DEV_ENTRY(APB1, I2C1), + [RCC_UART5] = DEV_ENTRY(APB1, UART5), + [RCC_UART4] = DEV_ENTRY(APB1, UART4), + [RCC_USART3] = DEV_ENTRY(APB1, USART3), + [RCC_USART2] = DEV_ENTRY(APB1, USART2), + [RCC_SPI3] = DEV_ENTRY(APB1, SPI3), + [RCC_SPI2] = DEV_ENTRY(APB1, SPI2), + [RCC_WWDG] = DEV_ENTRY(APB1, WWDG), + [RCC_TIMER14] = DEV_ENTRY(APB1, TIM14), + [RCC_TIMER13] = DEV_ENTRY(APB1, TIM13), + [RCC_TIMER12] = DEV_ENTRY(APB1, TIM12), + [RCC_TIMER7] = DEV_ENTRY(APB1, TIM7), + [RCC_TIMER6] = DEV_ENTRY(APB1, TIM6), + [RCC_TIMER5] = DEV_ENTRY(APB1, TIM5), + [RCC_TIMER4] = DEV_ENTRY(APB1, TIM4), + [RCC_TIMER3] = DEV_ENTRY(APB1, TIM3), + [RCC_TIMER2] = DEV_ENTRY(APB1, TIM2), + + /* APB2 */ + [RCC_TIMER11] = DEV_ENTRY(APB2, TIM11), + [RCC_TIMER10] = DEV_ENTRY(APB2, TIM10), + [RCC_TIMER9] = DEV_ENTRY(APB2, TIM9), + [RCC_SYSCFG] = DEV_ENTRY(APB2, SYSCFG), + [RCC_SPI1] = DEV_ENTRY(APB2, SPI1), + [RCC_SDIO] = DEV_ENTRY(APB2, SDIO), + [RCC_ADC3] = DEV_ENTRY(APB2, ADC3), + [RCC_ADC2] = DEV_ENTRY(APB2, ADC2), + [RCC_ADC1] = DEV_ENTRY(APB2, ADC1), + [RCC_USART6] = DEV_ENTRY(APB2, USART6), + [RCC_USART1] = DEV_ENTRY(APB2, USART1), + [RCC_TIMER8] = DEV_ENTRY(APB2, TIM8), + [RCC_TIMER1] = DEV_ENTRY(APB2, TIM1), +}; + +void rcc_clk_enable(rcc_clk_id id) { + static __io uint32* enable_regs[] = { + [RCC_AHB1] = &RCC_BASE->AHB1ENR, + [RCC_AHB2] = &RCC_BASE->AHB2ENR, + [RCC_AHB3] = &RCC_BASE->AHB3ENR, + [RCC_APB1] = &RCC_BASE->APB1ENR, + [RCC_APB2] = &RCC_BASE->APB2ENR, + }; + rcc_do_clk_enable(enable_regs, id); +} + +void rcc_reset_dev(rcc_clk_id id) { + static __io uint32* reset_regs[] = { + [RCC_AHB1] = &RCC_BASE->AHB1RSTR, + [RCC_AHB2] = &RCC_BASE->AHB2RSTR, + [RCC_AHB3] = &RCC_BASE->AHB3RSTR, + [RCC_APB1] = &RCC_BASE->AHB3RSTR, + [RCC_APB2] = &RCC_BASE->AHB3RSTR, + }; + rcc_do_reset_dev(reset_regs, id); +} + +void rcc_set_prescaler(rcc_prescaler prescaler, uint32 divider) { + static const uint32 masks[] = { + [RCC_PRESCALER_MCO2] = RCC_CFGR_MCO2PRE, + [RCC_PRESCALER_MCO1] = RCC_CFGR_MCO1PRE, + [RCC_PRESCALER_RTC] = RCC_CFGR_RTCPRE, + [RCC_PRESCALER_APB2] = RCC_CFGR_PPRE2, + [RCC_PRESCALER_APB1] = RCC_CFGR_PPRE1, + [RCC_PRESCALER_AHB] = RCC_CFGR_HPRE, + }; + rcc_do_set_prescaler(masks, prescaler, divider); +} + +/* pll_cfg->data must point to a struct stm32f2_rcc_pll_data. */ +void rcc_configure_pll(rcc_pll_cfg *pll_cfg) { + stm32f2_rcc_pll_data *data = pll_cfg->data; + uint32 pllcfgr; + + /* Check that the PLL is disabled. */ + ASSERT_FAULT(!rcc_is_clk_on(RCC_CLK_PLL)); + + /* Sanity-check all the parameters */ + ASSERT_FAULT((data->pllq >= 4) && (data->pllq <= 15)); + ASSERT_FAULT((data->pllp >= 2) && (data->pllp <= 8)); + ASSERT_FAULT(!(data->pllp & 1)); + ASSERT_FAULT((data->plln >= 192) && (data->plln <= 432)); + ASSERT_FAULT((data->pllm >= 2) && (data->pllm <= 63)); + + /* Update RCC_PLLCFGR to reflect new values. */ + pllcfgr = RCC_BASE->PLLCFGR; + pllcfgr &= ~(RCC_PLLCFGR_PLLQ | + RCC_PLLCFGR_PLLP | + RCC_PLLCFGR_PLLN | + RCC_PLLCFGR_PLLM | + RCC_PLLCFGR_PLLSRC); + pllcfgr |= (pll_cfg->pllsrc | + (data->pllq << 24) | + (((data->pllp >> 1) - 1) << 16) | + (data->plln << 6) | + data->pllm); + RCC_BASE->PLLCFGR = pllcfgr; +} diff --git a/libmaple/stm32f2/rules.mk b/libmaple/stm32f2/rules.mk new file mode 100644 index 0000000..4c62cc2 --- /dev/null +++ b/libmaple/stm32f2/rules.mk @@ -0,0 +1,40 @@ +# Standard things +sp := $(sp).x +dirstack_$(sp) := $(d) +d := $(dir) +BUILDDIRS += $(BUILD_PATH)/$(d) + +# Local flags +CFLAGS_$(d) = -I$(d) $(LIBMAPLE_INCLUDES) $(LIBMAPLE_PRIVATE_INCLUDES) -Wall -Werror + +# Local rules and targets +sSRCS_$(d) := isrs.S +sSRCS_$(d) += vector_table.S + +cSRCS_$(d) := adc.c +cSRCS_$(d) += dma.c +cSRCS_$(d) += exti.c +cSRCS_$(d) += fsmc.c +cSRCS_$(d) += gpio.c +cSRCS_$(d) += rcc.c +cSRCS_$(d) += spi.c +cSRCS_$(d) += syscfg.c +cSRCS_$(d) += timer.c +cSRCS_$(d) += usart.c + +sFILES_$(d) := $(sSRCS_$(d):%=$(d)/%) +cFILES_$(d) := $(cSRCS_$(d):%=$(d)/%) + +OBJS_$(d) := $(sFILES_$(d):%.S=$(BUILD_PATH)/%.o) \ + $(cFILES_$(d):%.c=$(BUILD_PATH)/%.o) +DEPS_$(d) := $(OBJS_$(d):%.o=%.d) + +$(OBJS_$(d)): TGT_ASFLAGS := +$(OBJS_$(d)): TGT_CFLAGS := $(CFLAGS_$(d)) + +TGT_BIN += $(OBJS_$(d)) + +# Standard things +-include $(DEPS_$(d)) +d := $(dirstack_$(sp)) +sp := $(basename $(sp)) diff --git a/libmaple/stm32f2/spi.c b/libmaple/stm32f2/spi.c new file mode 100644 index 0000000..cfd9995 --- /dev/null +++ b/libmaple/stm32f2/spi.c @@ -0,0 +1,88 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/spi.c + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 SPI/I2S. + */ + +#include <libmaple/spi.h> +#include "spi_private.h" + +/* + * Devices + */ + +static spi_dev spi1 = SPI_DEV(1); +static spi_dev spi2 = SPI_DEV(2); +static spi_dev spi3 = SPI_DEV(3); + +spi_dev *SPI1 = &spi1; +spi_dev *SPI2 = &spi2; +spi_dev *SPI3 = &spi3; + +/* + * Routines + */ + +void spi_config_gpios(spi_dev *dev, + uint8 as_master, + gpio_dev *nss_dev, + uint8 nss_bit, + gpio_dev *comm_dev, + uint8 sck_bit, + uint8 miso_bit, + uint8 mosi_bit) { + gpio_af dev_af = spi_get_af(dev); + gpio_set_mode(nss_dev, nss_bit, GPIO_MODE_AF); + gpio_set_mode(comm_dev, sck_bit, GPIO_MODE_AF); + gpio_set_mode(comm_dev, miso_bit, GPIO_MODE_AF); + gpio_set_mode(comm_dev, mosi_bit, GPIO_MODE_AF); + gpio_set_af(nss_dev, nss_bit, dev_af); + gpio_set_af(comm_dev, sck_bit, dev_af); + gpio_set_af(comm_dev, miso_bit, dev_af); + gpio_set_af(comm_dev, mosi_bit, dev_af); +} + +void spi_foreach(void (*fn)(spi_dev*)) { + fn(SPI1); + fn(SPI2); + fn(SPI3); +} + +gpio_af spi_get_af(spi_dev *dev) { + switch (dev->clk_id) { + case RCC_SPI1: /* Fall through */ + case RCC_SPI2: + return GPIO_AF_SPI_1_2; + case RCC_SPI3: + return GPIO_AF_SPI3; + default: + ASSERT(0); /* Can't happen */ + return (gpio_af)-1; + } +} diff --git a/libmaple/stm32f2/syscfg.c b/libmaple/stm32f2/syscfg.c new file mode 100644 index 0000000..19e932e --- /dev/null +++ b/libmaple/stm32f2/syscfg.c @@ -0,0 +1,78 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/syscfg.c + * @brief SYSCFG routines. + */ + +#include <libmaple/syscfg.h> +#include <libmaple/bitband.h> +#include <libmaple/rcc.h> + +/** + * @brief Initialize the SYSCFG peripheral. + */ +void syscfg_init(void) { + rcc_clk_enable(RCC_SYSCFG); + rcc_reset_dev(RCC_SYSCFG); +} + +/** + * @brief Turn on the I/O compensation cell. + * + * It's only safe to do this when the supply voltage is between 2.4 V + * and 3.6 V. + */ +void syscfg_enable_io_compensation(void) { + bb_peri_set_bit(&SYSCFG_BASE->CMPCR, SYSCFG_CMPCR_CMP_PD_BIT, 1); + while (!(SYSCFG_BASE->CMPCR & SYSCFG_CMPCR_READY)) + ; +} + +/** + * @brief Turn off the I/O compensation cell. + */ +void syscfg_disable_io_compensation(void) { + bb_peri_set_bit(&SYSCFG_BASE->CMPCR, SYSCFG_CMPCR_CMP_PD_BIT, 0); +} + +/** + * @brief Set the memory to be mapped at address 0x00000000. + * + * This function can be used to override the BOOT pin + * configuration. Some restrictions apply; see your chip's reference + * manual for the details. + * + * @param mode Mode to set + * @see syscfg_mem_mode + */ +void syscfg_set_mem_mode(syscfg_mem_mode mode) { + uint32 memrmp = SYSCFG_BASE->MEMRMP; + memrmp &= ~SYSCFG_MEMRMP_MEM_MODE; + memrmp |= (uint32)mode; + SYSCFG_BASE->MEMRMP = memrmp; +} diff --git a/libmaple/stm32f2/timer.c b/libmaple/stm32f2/timer.c new file mode 100644 index 0000000..a85bea0 --- /dev/null +++ b/libmaple/stm32f2/timer.c @@ -0,0 +1,148 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/timer.c + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 timers. + */ + +#include <libmaple/timer.h> +#include "timer_private.h" + +/* + * Routines + */ + +/** + * @brief Get the GPIO alternate function corresponding to a timer. + * + * For example, if dev is TIMER1, this function returns + * GPIO_AF_TIM_1_2. This is useful for e.g. using gpio_set_af() to set + * a pin's alternate function to a timer. + * + * @param dev Timer device, must not be TIMER6 or TIMER7. + * @return gpio_af corresponding to dev + * @see gpio_set_af + * @see gpio_af + */ +gpio_af timer_get_af(timer_dev *dev) { + rcc_clk_id clk_id = dev->clk_id; + /* Timers 6 and 7 don't have any capture/compare, so they can't do + * PWM (and in fact have no AF values). */ + ASSERT(clk_id != RCC_TIMER6 && clk_id != RCC_TIMER7); + switch(dev->clk_id) { + case RCC_TIMER1: // fall-through + case RCC_TIMER2: + return GPIO_AF_TIM_1_2; + case RCC_TIMER3: // fall-through + case RCC_TIMER4: // ... + case RCC_TIMER5: + return GPIO_AF_TIM_3_4_5; + case RCC_TIMER8: // fall-through + case RCC_TIMER9: // ... + case RCC_TIMER10: // ... + case RCC_TIMER11: + return GPIO_AF_TIM_8_9_10_11; + case RCC_TIMER12: // fall-through + case RCC_TIMER13: // ... + case RCC_TIMER14: + return GPIO_AF_CAN_1_2_TIM_12_13_14; + default: + ASSERT(0); // Can't happen + return (gpio_af)-1; + } +} + +/* + * IRQ handlers + * + * Defer to the timer_private dispatch API. + */ + +void __irq_tim1_brk_tim9(void) { + dispatch_adv_brk(TIMER1); + dispatch_tim_9_12(TIMER9); +} + +void __irq_tim1_up_tim10(void) { + dispatch_adv_up(TIMER1); + dispatch_tim_10_11_13_14(TIMER10); +} + +void __irq_tim1_trg_com_tim11(void) { + dispatch_adv_trg_com(TIMER1); + dispatch_tim_10_11_13_14(TIMER11); +} + +void __irq_tim1_cc(void) { + dispatch_adv_cc(TIMER1); +} + +void __irq_tim2(void) { + dispatch_general(TIMER2); +} + +void __irq_tim3(void) { + dispatch_general(TIMER3); +} + +void __irq_tim4(void) { + dispatch_general(TIMER4); +} + +void __irq_tim5(void) { + dispatch_general(TIMER5); +} + +/* FIXME: this is also the DAC DMA underrun interrupt, so it needs a + * different name (and to be supported?). */ +void __irq_tim6(void) { + dispatch_basic(TIMER6); +} + +void __irq_tim7(void) { + dispatch_basic(TIMER7); +} + +void __irq_tim8_brk_tim12(void) { + dispatch_adv_brk(TIMER8); + dispatch_tim_9_12(TIMER12); +} + +void __irq_tim8_up_tim13(void) { + dispatch_adv_up(TIMER8); + dispatch_tim_10_11_13_14(TIMER13); +} + +void __irq_tim8_trg_com_tim14(void) { + dispatch_adv_trg_com(TIMER8); + dispatch_tim_10_11_13_14(TIMER14); +} + +void __irq_tim8_cc(void) { + dispatch_adv_cc(TIMER8); +} diff --git a/libmaple/stm32f2/usart.c b/libmaple/stm32f2/usart.c new file mode 100644 index 0000000..1472d13 --- /dev/null +++ b/libmaple/stm32f2/usart.c @@ -0,0 +1,204 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/usart.c + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F2 USART. + */ + +#include <libmaple/usart.h> +#include <libmaple/gpio.h> +#include "usart_private.h" + +/* + * Devices + */ + +static ring_buffer usart1_rb; +static usart_dev usart1 = { + .regs = USART1_BASE, + .rb = &usart1_rb, + .max_baud = 4500000UL, /* TODO: are these correct? */ + .clk_id = RCC_USART1, + .irq_num = NVIC_USART1, +}; +/** USART1 device */ +usart_dev *USART1 = &usart1; + +static ring_buffer usart2_rb; +static usart_dev usart2 = { + .regs = USART2_BASE, + .rb = &usart2_rb, + .max_baud = 2250000UL, /* TODO: are these correct? */ + .clk_id = RCC_USART2, + .irq_num = NVIC_USART2, +}; +/** USART2 device */ +usart_dev *USART2 = &usart2; + +static ring_buffer usart3_rb; +static usart_dev usart3 = { + .regs = USART3_BASE, + .rb = &usart3_rb, + .max_baud = 2250000UL, /* TODO: are these correct? */ + .clk_id = RCC_USART3, + .irq_num = NVIC_USART3, +}; +/** USART3 device */ +usart_dev *USART3 = &usart3; + +static ring_buffer uart4_rb; +static usart_dev uart4 = { + .regs = UART4_BASE, + .rb = &uart4_rb, + .max_baud = 2250000UL, /* TODO: are these correct? */ + .clk_id = RCC_UART4, + .irq_num = NVIC_UART4, +}; +/** UART4 device */ +usart_dev *UART4 = &uart4; + +static ring_buffer uart5_rb; +static usart_dev uart5 = { + .regs = UART5_BASE, + .rb = &uart5_rb, + .max_baud = 2250000UL, /* TODO: are these correct? */ + .clk_id = RCC_UART5, + .irq_num = NVIC_UART5, +}; +/** UART5 device */ +usart_dev *UART5 = &uart5; + +static ring_buffer usart6_rb; +static usart_dev usart6 = { + .regs = USART6_BASE, + .rb = &usart6_rb, + .max_baud = 4500000UL, /* TODO: are these correct? */ + .clk_id = RCC_USART6, + .irq_num = NVIC_USART6, +}; +usart_dev *USART6 = &usart6; + +/* + * Routines + */ + +void usart_config_gpios_async(usart_dev *udev, + gpio_dev *rx_dev, uint8 rx, + gpio_dev *tx_dev, uint8 tx, + unsigned flags) { + gpio_af af = usart_get_af(udev); + gpio_set_modef(rx_dev, rx, GPIO_MODE_AF, 0); + gpio_set_modef(tx_dev, tx, GPIO_MODE_AF, 0); + gpio_set_af(rx_dev, rx, af); + gpio_set_af(tx_dev, tx, af); +} + +void usart_set_baud_rate(usart_dev *dev, uint32 clock_speed, uint32 baud) { + uint32 integer_part; + uint32 fractional_part; + uint32 tmp; + uint32 over8 = !!(dev->regs->CR1 & USART_CR1_OVER8); + + ASSERT(!over8); /* OVER8 is currently unsupported. */ + + /* Figure out the clock speed, if the user doesn't give one. */ + if (clock_speed == 0) { + clock_speed = _usart_clock_freq(dev); + } + ASSERT(clock_speed); + + /* Convert desired baud rate to baud rate register setting. */ + integer_part = (25 * clock_speed) / (2 * (2 - over8) * baud); + tmp = (integer_part / 100) << 4; + fractional_part = integer_part - (100 * (tmp >> 4)); + tmp |= ((fractional_part * 16 + 50) / 100) & (uint8)0x0F; + + dev->regs->BRR = tmp; +} + +/** + * @brief Call a function on each USART. + * @param fn Function to call. + */ +void usart_foreach(void (*fn)(usart_dev*)) { + fn(USART1); + fn(USART2); + fn(USART3); + fn(UART4); + fn(UART5); + fn(USART6); +} + +/** + * @brief Get GPIO alternate function mode for a USART. + * @param dev USART whose gpio_af to get. + * @return gpio_af corresponding to dev. + */ +gpio_af usart_get_af(usart_dev *dev) { + switch (dev->clk_id) { + case RCC_USART1: + case RCC_USART2: + case RCC_USART3: + return GPIO_AF_USART_1_2_3; + case RCC_UART4: + case RCC_UART5: + case RCC_USART6: + return GPIO_AF_USART_4_5_6; + default: + ASSERT(0); /* Can't happen */ + return (gpio_af)-1; + } +} + +/* + * Interrupt handlers. + */ + +void __irq_usart1(void) { + usart_irq(&usart1_rb, USART1_BASE); +} + +void __irq_usart2(void) { + usart_irq(&usart2_rb, USART2_BASE); +} + +void __irq_usart3(void) { + usart_irq(&usart3_rb, USART3_BASE); +} + +void __irq_uart4(void) { + usart_irq(&uart4_rb, UART4_BASE); +} + +void __irq_uart5(void) { + usart_irq(&uart5_rb, UART5_BASE); +} + +void __irq_usart6(void) { + usart_irq(&usart6_rb, USART6_BASE); +} diff --git a/libmaple/stm32f2/vector_table.S b/libmaple/stm32f2/vector_table.S new file mode 100644 index 0000000..147e516 --- /dev/null +++ b/libmaple/stm32f2/vector_table.S @@ -0,0 +1,135 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/* STM32F2 vector table */ + + .section ".stm32.interrupt_vector" + + .globl __stm32_vector_table + .type __stm32_vector_table, %object + +__stm32_vector_table: +/* CM3 core interrupts */ + .long __msp_init + .long __exc_reset + .long __exc_nmi + .long __exc_hardfault + .long __exc_memmanage + .long __exc_busfault + .long __exc_usagefault + .long __stm32reservedexception7 + .long __stm32reservedexception8 + .long __stm32reservedexception9 + .long __stm32reservedexception10 + .long __exc_svc + .long __exc_debug_monitor + .long __stm32reservedexception13 + .long __exc_pendsv + .long __exc_systick +/* Peripheral interrupts */ + .long __irq_wwdg + .long __irq_pvd + .long __irq_tamp_stamp + .long __irq_rtc_wkup + .long __irq_flash + .long __irq_rcc + .long __irq_exti0 + .long __irq_exti1 + .long __irq_exti2 + .long __irq_exti3 + .long __irq_exti4 + .long __irq_dma1_stream0 + .long __irq_dma1_stream1 + .long __irq_dma1_stream2 + .long __irq_dma1_stream3 + .long __irq_dma1_stream4 + .long __irq_dma1_stream5 + .long __irq_dma1_stream6 + .long __irq_adc + .long __irq_can1_tx + .long __irq_can1_rx0 + .long __irq_can1_rx1 + .long __irq_can1_sce + .long __irq_exti9_5 + .long __irq_tim1_brk_tim9 + .long __irq_tim1_up_tim10 + .long __irq_tim1_trg_com_tim11 + .long __irq_tim1_cc + .long __irq_tim2 + .long __irq_tim3 + .long __irq_tim4 + .long __irq_i2c1_ev + .long __irq_i2c1_er + .long __irq_i2c2_ev + .long __irq_i2c2_er + .long __irq_spi1 + .long __irq_spi2 + .long __irq_usart1 + .long __irq_usart2 + .long __irq_usart3 + .long __irq_exti15_10 + .long __irq_rtc_alarm + .long __irq_otg_fs_wkup + .long __irq_tim8_brk_tim12 + .long __irq_tim8_up_tim13 + .long __irq_tim8_trg_com_tim14 + .long __irq_tim8_cc + .long __irq_dma1_stream7 + .long __irq_fsmc + .long __irq_sdio + .long __irq_tim5 + .long __irq_spi3 + .long __irq_uart4 + .long __irq_uart5 + .long __irq_tim6_dac + .long __irq_tim7 + .long __irq_dma2_stream0 + .long __irq_dma2_stream1 + .long __irq_dma2_stream2 + .long __irq_dma2_stream3 + .long __irq_dma2_stream4 + .long __irq_eth + .long __irq_eth_wkup + .long __irq_can2_tx + .long __irq_can2_rx0 + .long __irq_can2_rx1 + .long __irq_can2_sce + .long __irq_otg_fs + .long __irq_dma2_stream5 + .long __irq_dma2_stream6 + .long __irq_dma2_stream7 + .long __irq_usart6 + .long __irq_i2c3_ev + .long __irq_i2c3_er + .long __irq_otg_hs_ep1_out + .long __irq_otg_hs_ep1_in + .long __irq_otg_hs_wkup + .long __irq_otg_hs + .long __irq_dcmi + .long __irq_cryp + .long __irq_hash_rng + + .size __stm32_vector_table, . - __stm32_vector_table |