diff options
Diffstat (limited to 'libmaple/stm32f1')
| -rw-r--r-- | libmaple/stm32f1/exti.c | 32 | ||||
| -rw-r--r-- | libmaple/stm32f1/gpio.c | 36 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/gpio.h | 215 | ||||
| -rw-r--r-- | libmaple/stm32f1/rules.mk | 1 |
4 files changed, 161 insertions, 123 deletions
diff --git a/libmaple/stm32f1/exti.c b/libmaple/stm32f1/exti.c new file mode 100644 index 0000000..b9ff401 --- /dev/null +++ b/libmaple/stm32f1/exti.c @@ -0,0 +1,32 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +#include <libmaple/gpio.h> +#include "exti_private.h" + +void exti_select(exti_num num, exti_cfg port) { + exti_do_select(&AFIO_BASE->EXTICR1 + num / 4, num, port); +} diff --git a/libmaple/stm32f1/gpio.c b/libmaple/stm32f1/gpio.c index 2cbe299..4b596e9 100644 --- a/libmaple/stm32f1/gpio.c +++ b/libmaple/stm32f1/gpio.c @@ -39,7 +39,7 @@ gpio_dev gpioa = { .regs = GPIOA_BASE, .clk_id = RCC_GPIOA, - .exti_port = AFIO_EXTI_PA, + .exti_port = EXTI_PA, }; /** GPIO port A device. */ gpio_dev* const GPIOA = &gpioa; @@ -47,7 +47,7 @@ gpio_dev* const GPIOA = &gpioa; gpio_dev gpiob = { .regs = GPIOB_BASE, .clk_id = RCC_GPIOB, - .exti_port = AFIO_EXTI_PB, + .exti_port = EXTI_PB, }; /** GPIO port B device. */ gpio_dev* const GPIOB = &gpiob; @@ -55,7 +55,7 @@ gpio_dev* const GPIOB = &gpiob; gpio_dev gpioc = { .regs = GPIOC_BASE, .clk_id = RCC_GPIOC, - .exti_port = AFIO_EXTI_PC, + .exti_port = EXTI_PC, }; /** GPIO port C device. */ gpio_dev* const GPIOC = &gpioc; @@ -63,7 +63,7 @@ gpio_dev* const GPIOC = &gpioc; gpio_dev gpiod = { .regs = GPIOD_BASE, .clk_id = RCC_GPIOD, - .exti_port = AFIO_EXTI_PD, + .exti_port = EXTI_PD, }; /** GPIO port D device. */ gpio_dev* const GPIOD = &gpiod; @@ -72,7 +72,7 @@ gpio_dev* const GPIOD = &gpiod; gpio_dev gpioe = { .regs = GPIOE_BASE, .clk_id = RCC_GPIOE, - .exti_port = AFIO_EXTI_PE, + .exti_port = EXTI_PE, }; /** GPIO port E device. */ gpio_dev* const GPIOE = &gpioe; @@ -80,7 +80,7 @@ gpio_dev* const GPIOE = &gpioe; gpio_dev gpiof = { .regs = GPIOF_BASE, .clk_id = RCC_GPIOF, - .exti_port = AFIO_EXTI_PF, + .exti_port = EXTI_PF, }; /** GPIO port F device. */ gpio_dev* const GPIOF = &gpiof; @@ -88,7 +88,7 @@ gpio_dev* const GPIOF = &gpiof; gpio_dev gpiog = { .regs = GPIOG_BASE, .clk_id = RCC_GPIOG, - .exti_port = AFIO_EXTI_PG, + .exti_port = EXTI_PG, }; /** GPIO port G device. */ gpio_dev* const GPIOG = &gpiog; @@ -132,9 +132,9 @@ void gpio_set_mode(gpio_dev *dev, uint8 pin, gpio_pin_mode mode) { *cr = tmp; if (mode == GPIO_INPUT_PD) { - regs->ODR &= ~BIT(pin); + regs->ODR &= ~(1U << pin); } else if (mode == GPIO_INPUT_PU) { - regs->ODR |= BIT(pin); + regs->ODR |= (1U << pin); } } @@ -153,24 +153,6 @@ void afio_init(void) { #define AFIO_EXTI_SEL_MASK 0xF /** - * @brief Select a source input for an external interrupt. - * - * @param exti External interrupt. - * @param gpio_port Port which contains pin to use as source input. - * @see afio_exti_num - * @see afio_exti_port - */ -void afio_exti_select(afio_exti_num exti, afio_exti_port gpio_port) { - __io uint32 *exti_cr = &AFIO_BASE->EXTICR1 + exti / 4; - uint32 shift = 4 * (exti % 4); - uint32 cr = *exti_cr; - - cr &= ~(AFIO_EXTI_SEL_MASK << shift); - cr |= gpio_port << shift; - *exti_cr = cr; -} - -/** * @brief Perform an alternate function remap. * @param remapping Remapping to perform. */ diff --git a/libmaple/stm32f1/include/series/gpio.h b/libmaple/stm32f1/include/series/gpio.h index 1f209fe..0ca6d56 100644 --- a/libmaple/stm32f1/include/series/gpio.h +++ b/libmaple/stm32f1/include/series/gpio.h @@ -2,7 +2,7 @@ * The MIT License * * Copyright (c) 2010 Perry Hung. - * Copyright (c) 2011 LeafLabs, LLC. + * Copyright (c) 2011, 2012 LeafLabs, LLC. * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation @@ -27,7 +27,7 @@ /** * @file libmaple/stm32f1/include/series/gpio.h - * @brief STM32F1 GPIO support. + * @brief STM32F1 GPIO and AFIO support. * * General purpose I/O (GPIO) and Alternate Function I/O (AFIO) * prototypes, defines, and support functions. @@ -40,8 +40,9 @@ extern "C"{ #endif -#include <libmaple/libmaple.h> -#include <libmaple/rcc.h> +#include <libmaple/stm32.h> +#include <libmaple/libmaple_types.h> +#include <libmaple/exti.h> /* * GPIO register maps and devices @@ -58,46 +59,22 @@ typedef struct gpio_reg_map { __io uint32 LCKR; /**< Port configuration lock register */ } gpio_reg_map; -/** - * @brief External interrupt line port selector. - * - * Used to determine which GPIO port to map an external interrupt line - * onto. */ -/* (See AFIO sections, below) */ -typedef enum afio_exti_port { - AFIO_EXTI_PA, /**< Use port A (PAx) pin. */ - AFIO_EXTI_PB, /**< Use port B (PBx) pin. */ - AFIO_EXTI_PC, /**< Use port C (PCx) pin. */ - AFIO_EXTI_PD, /**< Use port D (PDx) pin. */ -#ifdef STM32_HIGH_DENSITY - AFIO_EXTI_PE, /**< Use port E (PEx) pin. */ - AFIO_EXTI_PF, /**< Use port F (PFx) pin. */ - AFIO_EXTI_PG, /**< Use port G (PGx) pin. */ -#endif -} afio_exti_port; - -/** GPIO device type */ -typedef struct gpio_dev { - gpio_reg_map *regs; /**< Register map */ - rcc_clk_id clk_id; /**< RCC clock information */ - afio_exti_port exti_port; /**< AFIO external interrupt port value */ -} gpio_dev; - -extern gpio_dev gpioa; -extern gpio_dev* const GPIOA; -extern gpio_dev gpiob; -extern gpio_dev* const GPIOB; -extern gpio_dev gpioc; -extern gpio_dev* const GPIOC; -extern gpio_dev gpiod; -extern gpio_dev* const GPIOD; +struct gpio_dev; +extern struct gpio_dev gpioa; +extern struct gpio_dev* const GPIOA; +extern struct gpio_dev gpiob; +extern struct gpio_dev* const GPIOB; +extern struct gpio_dev gpioc; +extern struct gpio_dev* const GPIOC; +extern struct gpio_dev gpiod; +extern struct gpio_dev* const GPIOD; #ifdef STM32_HIGH_DENSITY -extern gpio_dev gpioe; -extern gpio_dev* const GPIOE; -extern gpio_dev gpiof; -extern gpio_dev* const GPIOF; -extern gpio_dev gpiog; -extern gpio_dev* const GPIOG; +extern struct gpio_dev gpioe; +extern struct gpio_dev* const GPIOE; +extern struct gpio_dev gpiof; +extern struct gpio_dev* const GPIOF; +extern struct gpio_dev gpiog; +extern struct gpio_dev* const GPIOG; #endif /** GPIO port A register map base pointer */ @@ -108,14 +85,12 @@ extern gpio_dev* const GPIOG; #define GPIOC_BASE ((struct gpio_reg_map*)0x40011000) /** GPIO port D register map base pointer */ #define GPIOD_BASE ((struct gpio_reg_map*)0x40011400) -#ifdef STM32_HIGH_DENSITY /** GPIO port E register map base pointer */ #define GPIOE_BASE ((struct gpio_reg_map*)0x40011800) /** GPIO port F register map base pointer */ #define GPIOF_BASE ((struct gpio_reg_map*)0x40011C00) /** GPIO port G register map base pointer */ #define GPIOG_BASE ((struct gpio_reg_map*)0x40012000) -#endif /* * GPIO register bit definitions @@ -138,7 +113,7 @@ extern gpio_dev* const GPIOG; #define GPIO_CR_MODE_OUTPUT_50MHZ 0x3 /** - * @brief GPIO Pin modes. + * @brief GPIO pin modes. * * These only allow for 50MHZ max output speeds; if you want slower, * use direct register access. @@ -164,14 +139,6 @@ typedef enum gpio_pin_mode { /* GPIO_INPUT_PU treated as a special case, for ODR twiddling */ } gpio_pin_mode; -/** - * @brief Get a GPIO port's corresponding afio_exti_port. - * @param dev GPIO device whose afio_exti_port to return. - */ -static inline afio_exti_port gpio_exti_port(gpio_dev *dev) { - return dev->exti_port; -} - /* * AFIO register map */ @@ -232,17 +199,17 @@ typedef struct afio_reg_map { #define AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST (0x1 << 24) #define AFIO_MAPR_SWJ_CFG_NO_JTAG_SW (0x2 << 24) #define AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW (0x4 << 24) -#define AFIO_MAPR_ADC2_ETRGREG_REMAP BIT(20) -#define AFIO_MAPR_ADC2_ETRGINJ_REMAP BIT(19) -#define AFIO_MAPR_ADC1_ETRGREG_REMAP BIT(18) -#define AFIO_MAPR_ADC1_ETRGINJ_REMAP BIT(17) -#define AFIO_MAPR_TIM5CH4_IREMAP BIT(16) -#define AFIO_MAPR_PD01_REMAP BIT(15) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP (1U << 20) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP (1U << 19) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP (1U << 18) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP (1U << 17) +#define AFIO_MAPR_TIM5CH4_IREMAP (1U << 16) +#define AFIO_MAPR_PD01_REMAP (1U << 15) #define AFIO_MAPR_CAN_REMAP (0x3 << 13) #define AFIO_MAPR_CAN_REMAP_NONE (0x0 << 13) #define AFIO_MAPR_CAN_REMAP_PB8_PB9 (0x2 << 13) #define AFIO_MAPR_CAN_REMAP_PD0_PD1 (0x3 << 13) -#define AFIO_MAPR_TIM4_REMAP BIT(12) +#define AFIO_MAPR_TIM4_REMAP (1U << 12) #define AFIO_MAPR_TIM3_REMAP (0x3 << 10) #define AFIO_MAPR_TIM3_REMAP_NONE (0x0 << 10) #define AFIO_MAPR_TIM3_REMAP_PARTIAL (0x2 << 10) @@ -260,10 +227,10 @@ typedef struct afio_reg_map { #define AFIO_MAPR_USART3_REMAP_NONE (0x0 << 4) #define AFIO_MAPR_USART3_REMAP_PARTIAL (0x1 << 4) #define AFIO_MAPR_USART3_REMAP_FULL (0x3 << 4) -#define AFIO_MAPR_USART2_REMAP BIT(3) -#define AFIO_MAPR_USART1_REMAP BIT(2) -#define AFIO_MAPR_I2C1_REMAP BIT(1) -#define AFIO_MAPR_SPI1_REMAP BIT(0) +#define AFIO_MAPR_USART2_REMAP (1U << 3) +#define AFIO_MAPR_USART1_REMAP (1U << 2) +#define AFIO_MAPR_I2C1_REMAP (1U << 1) +#define AFIO_MAPR_SPI1_REMAP (1U << 0) /* External interrupt configuration register 1 */ @@ -337,12 +304,12 @@ typedef struct afio_reg_map { /* AF remap and debug I/O configuration register 2 */ -#define AFIO_MAPR2_FSMC_NADV BIT(10) -#define AFIO_MAPR2_TIM14_REMAP BIT(9) -#define AFIO_MAPR2_TIM13_REMAP BIT(8) -#define AFIO_MAPR2_TIM11_REMAP BIT(7) -#define AFIO_MAPR2_TIM10_REMAP BIT(6) -#define AFIO_MAPR2_TIM9_REMAP BIT(5) +#define AFIO_MAPR2_FSMC_NADV (1U << 10) +#define AFIO_MAPR2_TIM14_REMAP (1U << 9) +#define AFIO_MAPR2_TIM13_REMAP (1U << 8) +#define AFIO_MAPR2_TIM11_REMAP (1U << 7) +#define AFIO_MAPR2_TIM10_REMAP (1U << 6) +#define AFIO_MAPR2_TIM9_REMAP (1U << 5) /* * AFIO convenience routines @@ -350,33 +317,9 @@ typedef struct afio_reg_map { void afio_init(void); -/** - * External interrupt line numbers. - */ -typedef enum afio_exti_num { - AFIO_EXTI_0, /**< External interrupt line 0. */ - AFIO_EXTI_1, /**< External interrupt line 1. */ - AFIO_EXTI_2, /**< External interrupt line 2. */ - AFIO_EXTI_3, /**< External interrupt line 3. */ - AFIO_EXTI_4, /**< External interrupt line 4. */ - AFIO_EXTI_5, /**< External interrupt line 5. */ - AFIO_EXTI_6, /**< External interrupt line 6. */ - AFIO_EXTI_7, /**< External interrupt line 7. */ - AFIO_EXTI_8, /**< External interrupt line 8. */ - AFIO_EXTI_9, /**< External interrupt line 9. */ - AFIO_EXTI_10, /**< External interrupt line 10. */ - AFIO_EXTI_11, /**< External interrupt line 11. */ - AFIO_EXTI_12, /**< External interrupt line 12. */ - AFIO_EXTI_13, /**< External interrupt line 13. */ - AFIO_EXTI_14, /**< External interrupt line 14. */ - AFIO_EXTI_15, /**< External interrupt line 15. */ -} afio_exti_num; - -void afio_exti_select(afio_exti_num exti, afio_exti_port gpio_port); - /* HACK: Use upper bit to denote MAPR2, Bit 31 is reserved and * not used in either MAPR or MAPR2 */ -#define AFIO_REMAP_USE_MAPR2 (1 << 31) +#define AFIO_REMAP_USE_MAPR2 (1U << 31) /** * @brief Available peripheral remaps. @@ -474,6 +417,86 @@ static inline void afio_cfg_debug_ports(afio_debug_cfg config) { *mapr = (*mapr & ~AFIO_MAPR_SWJ_CFG) | config; } +/* + * Deprecated bits + */ + +/** + * @brief Deprecated. Use exti_cfg instead. + * + * In previous versions of libmaple, exti_attach_interrupt() took an + * afio_exti_port argument; afio_exti_port was also a member of struct + * gpio_dev. This isn't portable, so we now use exti_cfg + * instead. This typedef (and the macros AFIO_EXTI_PA, ..., + * AFIO_EXTI_PG) exist to preserve backwards compatibility. + */ +typedef exti_cfg afio_exti_port; + +/** Deprecated. Use EXTI_PA instead. */ +#define AFIO_EXTI_PA EXTI_PA +/** Deprecated. Use EXTI_PB instead. */ +#define AFIO_EXTI_PB EXTI_PB +/** Deprecated. Use EXTI_PC instead. */ +#define AFIO_EXTI_PC EXTI_PC +/** Deprecated. Use EXTI_PD instead. */ +#define AFIO_EXTI_PD EXTI_PD +/** Deprecated. Use EXTI_PE instead. */ +#define AFIO_EXTI_PE EXTI_PE +/** Deprecated. Use EXTI_PF instead. */ +#define AFIO_EXTI_PF EXTI_PF +/** Deprecated. Use EXTI_PG instead. */ +#define AFIO_EXTI_PG EXTI_PG + +/** + * @brief Deprecated. Use exti_num instead. + * + * In previous versions of libmaple, exti_attach_interrupt() took an + * afio_exti_num argument. This isn't portable, so we use exti_num + * instead. This typedef (and the macros AFIO_EXTI_0, ..., + * AFIO_EXTI_15) exist to preserve backwards compatibility. + */ +typedef exti_num afio_exti_num; + +/** Deprecated. Use EXTI0 instead. */ +#define AFIO_EXTI_0 EXTI0 +/** Deprecated. Use EXTI1 instead. */ +#define AFIO_EXTI_1 EXTI1 +/** Deprecated. Use EXTI2 instead. */ +#define AFIO_EXTI_2 EXTI2 +/** Deprecated. Use EXTI3 instead. */ +#define AFIO_EXTI_3 EXTI3 +/** Deprecated. Use EXTI4 instead. */ +#define AFIO_EXTI_4 EXTI4 +/** Deprecated. Use EXTI5 instead. */ +#define AFIO_EXTI_5 EXTI5 +/** Deprecated. Use EXTI6 instead. */ +#define AFIO_EXTI_6 EXTI6 +/** Deprecated. Use EXTI7 instead. */ +#define AFIO_EXTI_7 EXTI7 +/** Deprecated. Use EXTI8 instead. */ +#define AFIO_EXTI_8 EXTI8 +/** Deprecated. Use EXTI9 instead. */ +#define AFIO_EXTI_9 EXTI9 +/** Deprecated. Use EXTI10 instead. */ +#define AFIO_EXTI_10 EXTI10 +/** Deprecated. Use EXTI11 instead. */ +#define AFIO_EXTI_11 EXTI11 +/** Deprecated. Use EXTI12 instead. */ +#define AFIO_EXTI_12 EXTI12 +/** Deprecated. Use EXTI13 instead. */ +#define AFIO_EXTI_13 EXTI13 +/** Deprecated. Use EXTI14 instead. */ +#define AFIO_EXTI_14 EXTI14 +/** Deprecated. Use EXTI15 instead. */ +#define AFIO_EXTI_15 EXTI15 + +/** + * @brief Deprecated. Use exti_select(exti, port) instead. + */ +static __always_inline void afio_exti_select(exti_num exti, exti_cfg port) { + exti_select(exti, port); +} + #ifdef __cplusplus } #endif diff --git a/libmaple/stm32f1/rules.mk b/libmaple/stm32f1/rules.mk index 0effea3..15f6fdb 100644 --- a/libmaple/stm32f1/rules.mk +++ b/libmaple/stm32f1/rules.mk @@ -17,6 +17,7 @@ sSRCS_$(d) += $(MCU_F1_LINE)/vector_table.S cSRCS_$(d) := adc.c cSRCS_$(d) += bkp.c cSRCS_$(d) += dma.c +cSRCS_$(d) += exti.c cSRCS_$(d) += fsmc.c cSRCS_$(d) += gpio.c cSRCS_$(d) += rcc.c |