1 files changed, 132 insertions, 0 deletions
diff --git a/libmaple/stm32f10x_conf.h b/libmaple/stm32f10x_conf.h
new file mode 100644
index 0000000..ddd1833
--- /dev/null
+++ b/libmaple/stm32f10x_conf.h
@@ -0,0 +1,132 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : stm32f10x_conf.h
+* Author             : MCD Application Team
+* Version            : V2.0.2
+* Date               : 07/11/2008
+* Description        : Library configuration file.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_type.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to compile the library in DEBUG mode, this will expanse
+   the "assert_param" macro in the firmware library code (see "Exported macro"
+   section below) */
+/* #define DEBUG    1*/
+
+/* Comment the line below to disable the specific peripheral inclusion */
+/************************************* ADC ************************************/
+//#define _ADC
+//#define _ADC1
+//#define _ADC2
+//#define _ADC3
+//#define _BKP 
+//#define _CAN
+//#define _CRC
+//#define _DAC
+//#define _DBGMCU
+//#define _DMA
+//#define _DMA1_Channel1
+//#define _DMA1_Channel2
+//#define _DMA1_Channel3
+//#define _DMA1_Channel4
+//#define _DMA1_Channel5
+//#define _DMA1_Channel6
+//#define _DMA1_Channel7
+//#define _DMA2_Channel1
+//#define _DMA2_Channel2
+//#define _DMA2_Channel3
+//#define _DMA2_Channel4
+//#define _DMA2_Channel5
+#define _EXTI
+#define _FLASH
+
+/* Uncomment the line below to enable FLASH program/erase/protections functions,
+   otherwise only FLASH configuration (latency, prefetch, half cycle) functions
+   are enabled */
+/* #define _FLASH_PROG */
+
+#if 0
+#define _FSMC
+#define _GPIO
+#define _GPIOA
+#define _GPIOB
+#define _GPIOC
+#define _GPIOD
+#define _GPIOE
+#define _GPIOF
+#define _GPIOG
+#define _I2C
+#define _I2C1
+#define _I2C2
+#define _IWDG
+#define _PWR
+#define _RTC
+#define _SDIO
+#define _SPI
+#define _SPI1
+#define _SPI2
+#define _SPI3
+#define _SysTick
+#define _TIM
+#define _TIM1
+#define _TIM2
+#define _TIM3
+#define _TIM4
+#define _TIM5
+#define _TIM6
+#define _TIM7
+#define _TIM8
+#define _USART
+#define _USART1
+#define _USART3
+#define _UART4
+#define _UART5
+#endif
+#define _USART2
+#define _NVIC
+#define _RCC
+#define _AFIO
+
+/************************************* WWDG ***********************************/
+#define _WWDG
+
+/* In the following line adjust the value of External High Speed oscillator (HSE)
+   used in your application */
+#define HSE_Value    ((u32)8000000) /* Value of the External oscillator in Hz*/
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  DEBUG
+/*******************************************************************************
+* Macro Name     : assert_param
+* Description    : The assert_param macro is used for function's parameters check.
+*                  It is used only if the library is compiled in DEBUG mode. 
+* Input          : - expr: If expr is false, it calls assert_failed function
+*                    which reports the name of the source file and the source
+*                    line number of the call that failed. 
+*                    If expr is true, it returns no value.
+* Return         : None
+*******************************************************************************/ 
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(u8* file, u32 line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* DEBUG */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/