diff options
Diffstat (limited to 'libmaple/stm32f1/include/series')
| -rw-r--r-- | libmaple/stm32f1/include/series/flash.h | 142 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/gpio.h | 479 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/nvic.h | 139 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/rcc.h | 553 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/stm32.h | 100 |
5 files changed, 1413 insertions, 0 deletions
diff --git a/libmaple/stm32f1/include/series/flash.h b/libmaple/stm32f1/include/series/flash.h new file mode 100644 index 0000000..efa608c --- /dev/null +++ b/libmaple/stm32f1/include/series/flash.h @@ -0,0 +1,142 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/flash.h + * @brief STM32F1 Flash header. + * + * Provides register map, base pointer, and register bit definitions + * for the Flash controller on the STM32F1 line, along with + * series-specific configuration values. + */ + +#ifndef _LIBMAPLE_STM32F1_FLASH_H_ +#define _LIBMAPLE_STM32F1_FLASH_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple.h> + +/* + * Register map + */ + +/** Flash register map type */ +typedef struct flash_reg_map { + __io uint32 ACR; /**< Access control register */ + __io uint32 KEYR; /**< Key register */ + __io uint32 OPTKEYR; /**< OPTKEY register */ + __io uint32 SR; /**< Status register */ + __io uint32 CR; /**< Control register */ + __io uint32 AR; /**< Address register */ + __io uint32 OBR; /**< Option byte register */ + __io uint32 WRPR; /**< Write protection register */ +} flash_reg_map; + +/** Flash register map base pointer */ +#define FLASH_BASE ((struct flash_reg_map*)0x40022000) + +/* + * Register bit definitions + */ + +/* Access control register */ + +#define FLASH_ACR_PRFTBS_BIT 5 +#define FLASH_ACR_PRFTBE_BIT 4 +#define FLASH_ACR_HLFCYA_BIT 3 + +#define FLASH_ACR_PRFTBS BIT(FLASH_ACR_PRFTBS_BIT) +#define FLASH_ACR_PRFTBE BIT(FLASH_ACR_PRFTBE_BIT) +#define FLASH_ACR_HLFCYA BIT(FLASH_ACR_HLFCYA_BIT) +#define FLASH_ACR_LATENCY 0x7 + +/* Status register */ + +#define FLASH_SR_EOP_BIT 5 +#define FLASH_SR_WRPRTERR_BIT 4 +#define FLASH_SR_PGERR_BIT 2 +#define FLASH_SR_BSY_BIT 0 + +#define FLASH_SR_EOP BIT(FLASH_SR_EOP_BIT) +#define FLASH_SR_WRPRTERR BIT(FLASH_SR_WRPRTERR_BIT) +#define FLASH_SR_PGERR BIT(FLASH_SR_PGERR_BIT) +#define FLASH_SR_BSY BIT(FLASH_SR_BSY_BIT) + +/* Control register */ + +#define FLASH_CR_EOPIE_BIT 12 +#define FLASH_CR_ERRIE_BIT 10 +#define FLASH_CR_OPTWRE_BIT 9 +#define FLASH_CR_LOCK_BIT 7 +#define FLASH_CR_STRT_BIT 6 +#define FLASH_CR_OPTER_BIT 5 +#define FLASH_CR_OPTPG_BIT 4 +#define FLASH_CR_MER_BIT 2 +#define FLASH_CR_PER_BIT 1 +#define FLASH_CR_PG_BIT 0 + +#define FLASH_CR_EOPIE BIT(FLASH_CR_EOPIE_BIT) +#define FLASH_CR_ERRIE BIT(FLASH_CR_ERRIE_BIT) +#define FLASH_CR_OPTWRE BIT(FLASH_CR_OPTWRE_BIT) +#define FLASH_CR_LOCK BIT(FLASH_CR_LOCK_BIT) +#define FLASH_CR_STRT BIT(FLASH_CR_STRT_BIT) +#define FLASH_CR_OPTER BIT(FLASH_CR_OPTER_BIT) +#define FLASH_CR_OPTPG BIT(FLASH_CR_OPTPG_BIT) +#define FLASH_CR_MER BIT(FLASH_CR_MER_BIT) +#define FLASH_CR_PER BIT(FLASH_CR_PER_BIT) +#define FLASH_CR_PG BIT(FLASH_CR_PG_BIT) + +/* Option byte register */ + +#define FLASH_OBR_nRST_STDBY_BIT 4 +#define FLASH_OBR_nRST_STOP_BIT 3 +#define FLASH_OBR_WDG_SW_BIT 2 +#define FLASH_OBR_RDPRT_BIT 1 +#define FLASH_OBR_OPTERR_BIT 0 + +#define FLASH_OBR_DATA1 (0xFF << 18) +#define FLASH_OBR_DATA0 (0xFF << 10) +#define FLASH_OBR_USER 0x3FF +#define FLASH_OBR_nRST_STDBY BIT(FLASH_OBR_nRST_STDBY_BIT) +#define FLASH_OBR_nRST_STOP BIT(FLASH_OBR_nRST_STOP_BIT) +#define FLASH_OBR_WDG_SW BIT(FLASH_OBR_WDG_SW_BIT) +#define FLASH_OBR_RDPRT BIT(FLASH_OBR_RDPRT_BIT) +#define FLASH_OBR_OPTERR BIT(FLASH_OBR_OPTERR_BIT) + +/* + * Series-specific configuration values. + */ + +#define FLASH_SAFE_WAIT_STATES FLASH_WAIT_STATE_2 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/gpio.h b/libmaple/stm32f1/include/series/gpio.h new file mode 100644 index 0000000..c10244d --- /dev/null +++ b/libmaple/stm32f1/include/series/gpio.h @@ -0,0 +1,479 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file libmaple/stm32f1/gpio.h + * @brief General purpose I/O (GPIO) and Alternate Function I/O + * (AFIO) prototypes, defines, and inlined access functions. + */ + +#ifndef _LIBMAPLE_STM32F1_GPIO_H_ +#define _LIBMAPLE_STM32F1_GPIO_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple.h> +#include <libmaple/rcc.h> + +/* + * GPIO register maps and devices + */ + +/** GPIO register map type */ +typedef struct gpio_reg_map { + __io uint32 CRL; /**< Port configuration register low */ + __io uint32 CRH; /**< Port configuration register high */ + __io uint32 IDR; /**< Port input data register */ + __io uint32 ODR; /**< Port output data register */ + __io uint32 BSRR; /**< Port bit set/reset register */ + __io uint32 BRR; /**< Port bit reset register */ + __io uint32 LCKR; /**< Port configuration lock register */ +} gpio_reg_map; + +/** + * @brief External interrupt line port selector. + * + * Used to determine which GPIO port to map an external interrupt line + * onto. */ +/* (See AFIO sections, below) */ +typedef enum afio_exti_port { + AFIO_EXTI_PA, /**< Use port A (PAx) pin. */ + AFIO_EXTI_PB, /**< Use port B (PBx) pin. */ + AFIO_EXTI_PC, /**< Use port C (PCx) pin. */ + AFIO_EXTI_PD, /**< Use port D (PDx) pin. */ +#ifdef STM32_HIGH_DENSITY + AFIO_EXTI_PE, /**< Use port E (PEx) pin. */ + AFIO_EXTI_PF, /**< Use port F (PFx) pin. */ + AFIO_EXTI_PG, /**< Use port G (PGx) pin. */ +#endif +} afio_exti_port; + +/** GPIO device type */ +typedef struct gpio_dev { + gpio_reg_map *regs; /**< Register map */ + rcc_clk_id clk_id; /**< RCC clock information */ + afio_exti_port exti_port; /**< AFIO external interrupt port value */ +} gpio_dev; + +extern gpio_dev gpioa; +extern gpio_dev* const GPIOA; +extern gpio_dev gpiob; +extern gpio_dev* const GPIOB; +extern gpio_dev gpioc; +extern gpio_dev* const GPIOC; +extern gpio_dev gpiod; +extern gpio_dev* const GPIOD; +#ifdef STM32_HIGH_DENSITY +extern gpio_dev gpioe; +extern gpio_dev* const GPIOE; +extern gpio_dev gpiof; +extern gpio_dev* const GPIOF; +extern gpio_dev gpiog; +extern gpio_dev* const GPIOG; +#endif + +/** GPIO port A register map base pointer */ +#define GPIOA_BASE ((struct gpio_reg_map*)0x40010800) +/** GPIO port B register map base pointer */ +#define GPIOB_BASE ((struct gpio_reg_map*)0x40010C00) +/** GPIO port C register map base pointer */ +#define GPIOC_BASE ((struct gpio_reg_map*)0x40011000) +/** GPIO port D register map base pointer */ +#define GPIOD_BASE ((struct gpio_reg_map*)0x40011400) +#ifdef STM32_HIGH_DENSITY +/** GPIO port E register map base pointer */ +#define GPIOE_BASE ((struct gpio_reg_map*)0x40011800) +/** GPIO port F register map base pointer */ +#define GPIOF_BASE ((struct gpio_reg_map*)0x40011C00) +/** GPIO port G register map base pointer */ +#define GPIOG_BASE ((struct gpio_reg_map*)0x40012000) +#endif + +/* + * GPIO register bit definitions + */ + +/* Control registers, low and high */ + +#define GPIO_CR_CNF (0x3 << 2) +#define GPIO_CR_CNF_INPUT_ANALOG (0x0 << 2) +#define GPIO_CR_CNF_INPUT_FLOATING (0x1 << 2) +#define GPIO_CR_CNF_INPUT_PU_PD (0x2 << 2) +#define GPIO_CR_CNF_OUTPUT_PP (0x0 << 2) +#define GPIO_CR_CNF_OUTPUT_OD (0x1 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_PP (0x2 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_OD (0x3 << 2) +#define GPIO_CR_MODE 0x3 +#define GPIO_CR_MODE_INPUT 0x0 +#define GPIO_CR_MODE_OUTPUT_10MHZ 0x1 +#define GPIO_CR_MODE_OUTPUT_2MHZ 0x2 +#define GPIO_CR_MODE_OUTPUT_50MHZ 0x3 + +/** + * @brief GPIO Pin modes. + * + * These only allow for 50MHZ max output speeds; if you want slower, + * use direct register access. + */ +typedef enum gpio_pin_mode { + GPIO_OUTPUT_PP = (GPIO_CR_CNF_OUTPUT_PP | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output push-pull. */ + GPIO_OUTPUT_OD = (GPIO_CR_CNF_OUTPUT_OD | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output open-drain. */ + GPIO_AF_OUTPUT_PP = (GPIO_CR_CNF_AF_OUTPUT_PP | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function + output push-pull. */ + GPIO_AF_OUTPUT_OD = (GPIO_CR_CNF_AF_OUTPUT_OD | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function + output open drain. */ + GPIO_INPUT_ANALOG = (GPIO_CR_CNF_INPUT_ANALOG | + GPIO_CR_MODE_INPUT), /**< Analog input. */ + GPIO_INPUT_FLOATING = (GPIO_CR_CNF_INPUT_FLOATING | + GPIO_CR_MODE_INPUT), /**< Input floating. */ + GPIO_INPUT_PD = (GPIO_CR_CNF_INPUT_PU_PD | + GPIO_CR_MODE_INPUT), /**< Input pull-down. */ + GPIO_INPUT_PU /**< Input pull-up. */ + /* GPIO_INPUT_PU treated as a special case, for ODR twiddling */ +} gpio_pin_mode; + +/** + * @brief Get a GPIO port's corresponding afio_exti_port. + * @param dev GPIO device whose afio_exti_port to return. + */ +static inline afio_exti_port gpio_exti_port(gpio_dev *dev) { + return dev->exti_port; +} + +/* + * AFIO register map + */ + +/** AFIO register map */ +typedef struct afio_reg_map { + __io uint32 EVCR; /**< Event control register. */ + __io uint32 MAPR; /**< AF remap and debug I/O configuration + register. */ + __io uint32 EXTICR1; /**< External interrupt configuration + register 1. */ + __io uint32 EXTICR2; /**< External interrupt configuration + register 2. */ + __io uint32 EXTICR3; /**< External interrupt configuration + register 3. */ + __io uint32 EXTICR4; /**< External interrupt configuration + register 4. */ + __io uint32 MAPR2; /**< AF remap and debug I/O configuration + register 2. */ +} afio_reg_map; + +/** AFIO register map base pointer. */ +#define AFIO_BASE ((struct afio_reg_map *)0x40010000) + +/* + * AFIO register bit definitions + */ + +/* Event control register */ + +#define AFIO_EVCR_EVOE (0x1 << 7) +#define AFIO_EVCR_PORT_PA (0x0 << 4) +#define AFIO_EVCR_PORT_PB (0x1 << 4) +#define AFIO_EVCR_PORT_PC (0x2 << 4) +#define AFIO_EVCR_PORT_PD (0x3 << 4) +#define AFIO_EVCR_PORT_PE (0x4 << 4) +#define AFIO_EVCR_PIN_0 0x0 +#define AFIO_EVCR_PIN_1 0x1 +#define AFIO_EVCR_PIN_2 0x2 +#define AFIO_EVCR_PIN_3 0x3 +#define AFIO_EVCR_PIN_4 0x4 +#define AFIO_EVCR_PIN_5 0x5 +#define AFIO_EVCR_PIN_6 0x6 +#define AFIO_EVCR_PIN_7 0x7 +#define AFIO_EVCR_PIN_8 0x8 +#define AFIO_EVCR_PIN_9 0x9 +#define AFIO_EVCR_PIN_10 0xA +#define AFIO_EVCR_PIN_11 0xB +#define AFIO_EVCR_PIN_12 0xC +#define AFIO_EVCR_PIN_13 0xD +#define AFIO_EVCR_PIN_14 0xE +#define AFIO_EVCR_PIN_15 0xF + +/* AF remap and debug I/O configuration register */ + +#define AFIO_MAPR_SWJ_CFG (0x7 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ (0x0 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST (0x1 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_SW (0x2 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW (0x4 << 24) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP BIT(20) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP BIT(19) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP BIT(18) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP BIT(17) +#define AFIO_MAPR_TIM5CH4_IREMAP BIT(16) +#define AFIO_MAPR_PD01_REMAP BIT(15) +#define AFIO_MAPR_CAN_REMAP (0x3 << 13) +#define AFIO_MAPR_CAN_REMAP_NONE (0x0 << 13) +#define AFIO_MAPR_CAN_REMAP_PB8_PB9 (0x2 << 13) +#define AFIO_MAPR_CAN_REMAP_PD0_PD1 (0x3 << 13) +#define AFIO_MAPR_TIM4_REMAP BIT(12) +#define AFIO_MAPR_TIM3_REMAP (0x3 << 10) +#define AFIO_MAPR_TIM3_REMAP_NONE (0x0 << 10) +#define AFIO_MAPR_TIM3_REMAP_PARTIAL (0x2 << 10) +#define AFIO_MAPR_TIM3_REMAP_FULL (0x3 << 10) +#define AFIO_MAPR_TIM2_REMAP (0x3 << 8) +#define AFIO_MAPR_TIM2_REMAP_NONE (0x0 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3 (0x1 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11 (0x2 << 8) +#define AFIO_MAPR_TIM2_REMAP_FULL (0x3 << 8) +#define AFIO_MAPR_TIM1_REMAP (0x3 << 6) +#define AFIO_MAPR_TIM1_REMAP_NONE (0x0 << 6) +#define AFIO_MAPR_TIM1_REMAP_PARTIAL (0x1 << 6) +#define AFIO_MAPR_TIM1_REMAP_FULL (0x3 << 6) +#define AFIO_MAPR_USART3_REMAP (0x3 << 4) +#define AFIO_MAPR_USART3_REMAP_NONE (0x0 << 4) +#define AFIO_MAPR_USART3_REMAP_PARTIAL (0x1 << 4) +#define AFIO_MAPR_USART3_REMAP_FULL (0x3 << 4) +#define AFIO_MAPR_USART2_REMAP BIT(3) +#define AFIO_MAPR_USART1_REMAP BIT(2) +#define AFIO_MAPR_I2C1_REMAP BIT(1) +#define AFIO_MAPR_SPI1_REMAP BIT(0) + +/* External interrupt configuration register 1 */ + +#define AFIO_EXTICR1_EXTI3 (0xF << 12) +#define AFIO_EXTICR1_EXTI3_PA (0x0 << 12) +#define AFIO_EXTICR1_EXTI3_PB (0x1 << 12) +#define AFIO_EXTICR1_EXTI3_PC (0x2 << 12) +#define AFIO_EXTICR1_EXTI3_PD (0x3 << 12) +#define AFIO_EXTICR1_EXTI3_PE (0x4 << 12) +#define AFIO_EXTICR1_EXTI3_PF (0x5 << 12) +#define AFIO_EXTICR1_EXTI3_PG (0x6 << 12) +#define AFIO_EXTICR1_EXTI2 (0xF << 8) +#define AFIO_EXTICR1_EXTI2_PA (0x0 << 8) +#define AFIO_EXTICR1_EXTI2_PB (0x1 << 8) +#define AFIO_EXTICR1_EXTI2_PC (0x2 << 8) +#define AFIO_EXTICR1_EXTI2_PD (0x3 << 8) +#define AFIO_EXTICR1_EXTI2_PE (0x4 << 8) +#define AFIO_EXTICR1_EXTI2_PF (0x5 << 8) +#define AFIO_EXTICR1_EXTI2_PG (0x6 << 8) +#define AFIO_EXTICR1_EXTI1 (0xF << 4) +#define AFIO_EXTICR1_EXTI1_PA (0x0 << 4) +#define AFIO_EXTICR1_EXTI1_PB (0x1 << 4) +#define AFIO_EXTICR1_EXTI1_PC (0x2 << 4) +#define AFIO_EXTICR1_EXTI1_PD (0x3 << 4) +#define AFIO_EXTICR1_EXTI1_PE (0x4 << 4) +#define AFIO_EXTICR1_EXTI1_PF (0x5 << 4) +#define AFIO_EXTICR1_EXTI1_PG (0x6 << 4) +#define AFIO_EXTICR1_EXTI0 0xF +#define AFIO_EXTICR1_EXTI0_PA 0x0 +#define AFIO_EXTICR1_EXTI0_PB 0x1 +#define AFIO_EXTICR1_EXTI0_PC 0x2 +#define AFIO_EXTICR1_EXTI0_PD 0x3 +#define AFIO_EXTICR1_EXTI0_PE 0x4 +#define AFIO_EXTICR1_EXTI0_PF 0x5 +#define AFIO_EXTICR1_EXTI0_PG 0x6 + +/* External interrupt configuration register 2 */ + +#define AFIO_EXTICR2_EXTI7 (0xF << 12) +#define AFIO_EXTICR2_EXTI7_PA (0x0 << 12) +#define AFIO_EXTICR2_EXTI7_PB (0x1 << 12) +#define AFIO_EXTICR2_EXTI7_PC (0x2 << 12) +#define AFIO_EXTICR2_EXTI7_PD (0x3 << 12) +#define AFIO_EXTICR2_EXTI7_PE (0x4 << 12) +#define AFIO_EXTICR2_EXTI7_PF (0x5 << 12) +#define AFIO_EXTICR2_EXTI7_PG (0x6 << 12) +#define AFIO_EXTICR2_EXTI6 (0xF << 8) +#define AFIO_EXTICR2_EXTI6_PA (0x0 << 8) +#define AFIO_EXTICR2_EXTI6_PB (0x1 << 8) +#define AFIO_EXTICR2_EXTI6_PC (0x2 << 8) +#define AFIO_EXTICR2_EXTI6_PD (0x3 << 8) +#define AFIO_EXTICR2_EXTI6_PE (0x4 << 8) +#define AFIO_EXTICR2_EXTI6_PF (0x5 << 8) +#define AFIO_EXTICR2_EXTI6_PG (0x6 << 8) +#define AFIO_EXTICR2_EXTI5 (0xF << 4) +#define AFIO_EXTICR2_EXTI5_PA (0x0 << 4) +#define AFIO_EXTICR2_EXTI5_PB (0x1 << 4) +#define AFIO_EXTICR2_EXTI5_PC (0x2 << 4) +#define AFIO_EXTICR2_EXTI5_PD (0x3 << 4) +#define AFIO_EXTICR2_EXTI5_PE (0x4 << 4) +#define AFIO_EXTICR2_EXTI5_PF (0x5 << 4) +#define AFIO_EXTICR2_EXTI5_PG (0x6 << 4) +#define AFIO_EXTICR2_EXTI4 0xF +#define AFIO_EXTICR2_EXTI4_PA 0x0 +#define AFIO_EXTICR2_EXTI4_PB 0x1 +#define AFIO_EXTICR2_EXTI4_PC 0x2 +#define AFIO_EXTICR2_EXTI4_PD 0x3 +#define AFIO_EXTICR2_EXTI4_PE 0x4 +#define AFIO_EXTICR2_EXTI4_PF 0x5 +#define AFIO_EXTICR2_EXTI4_PG 0x6 + +/* AF remap and debug I/O configuration register 2 */ + +#define AFIO_MAPR2_FSMC_NADV BIT(10) +#define AFIO_MAPR2_TIM14_REMAP BIT(9) +#define AFIO_MAPR2_TIM13_REMAP BIT(8) +#define AFIO_MAPR2_TIM11_REMAP BIT(7) +#define AFIO_MAPR2_TIM10_REMAP BIT(6) +#define AFIO_MAPR2_TIM9_REMAP BIT(5) + +/* + * AFIO convenience routines + */ + +void afio_init(void); + +/** + * External interrupt line numbers. + */ +typedef enum afio_exti_num { + AFIO_EXTI_0, /**< External interrupt line 0. */ + AFIO_EXTI_1, /**< External interrupt line 1. */ + AFIO_EXTI_2, /**< External interrupt line 2. */ + AFIO_EXTI_3, /**< External interrupt line 3. */ + AFIO_EXTI_4, /**< External interrupt line 4. */ + AFIO_EXTI_5, /**< External interrupt line 5. */ + AFIO_EXTI_6, /**< External interrupt line 6. */ + AFIO_EXTI_7, /**< External interrupt line 7. */ + AFIO_EXTI_8, /**< External interrupt line 8. */ + AFIO_EXTI_9, /**< External interrupt line 9. */ + AFIO_EXTI_10, /**< External interrupt line 10. */ + AFIO_EXTI_11, /**< External interrupt line 11. */ + AFIO_EXTI_12, /**< External interrupt line 12. */ + AFIO_EXTI_13, /**< External interrupt line 13. */ + AFIO_EXTI_14, /**< External interrupt line 14. */ + AFIO_EXTI_15, /**< External interrupt line 15. */ +} afio_exti_num; + +void afio_exti_select(afio_exti_num exti, afio_exti_port gpio_port); + +/* HACK: Use upper bit to denote MAPR2, Bit 31 is reserved and + * not used in either MAPR or MAPR2 */ +#define AFIO_REMAP_USE_MAPR2 (1 << 31) + +/** + * @brief Available peripheral remaps. + * @see afio_remap() + */ +typedef enum afio_remap_peripheral { + AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP, /**< + ADC 2 external trigger regular conversion remapping */ + AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP, /**< + ADC 2 external trigger injected conversion remapping */ + AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP, /**< + ADC 1 external trigger regular conversion remapping */ + AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP, /**< + ADC 1 external trigger injected conversion remapping */ + AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP, /**< + Timer 5 channel 4 internal remapping */ + AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP, /**< + Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + AFIO_REMAP_CAN_1 = AFIO_MAPR_CAN_REMAP_PB8_PB9, /**< + CAN alternate function remapping 1 (RX on PB8, TX on PB9) */ + AFIO_REMAP_CAN_2 = AFIO_MAPR_CAN_REMAP_PD0_PD1, /**< + CAN alternate function remapping 2 (RX on PD0, TX on PD1) */ + AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP, /**< + Timer 4 remapping */ + AFIO_REMAP_TIM3_PARTIAL = AFIO_MAPR_TIM3_REMAP_PARTIAL, /**< + Timer 3 partial remapping */ + AFIO_REMAP_TIM3_FULL = AFIO_MAPR_TIM3_REMAP_FULL, /**< + Timer 3 full remapping */ + AFIO_REMAP_TIM2_PARTIAL_1 = AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3, /**< + Timer 2 partial remapping 1 (CH1 and ETR on PA15, CH2 on PB3, CH3 + on PA2, CH4 on PA3) */ + AFIO_REMAP_TIM2_PARTIAL_2 = AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11, /**< + Timer 2 partial remapping 2 (CH1 and ETR on PA0, CH2 on PA1, CH3 + on PB10, CH4 on PB11) */ + AFIO_REMAP_TIM2_FULL = AFIO_MAPR_TIM2_REMAP_FULL, /**< + Timer 2 full remapping */ + AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP, /**< + USART 2 remapping */ + AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP, /**< + USART 1 remapping */ + AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP, /**< + I2C 1 remapping */ + AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP, /**< + SPI 1 remapping */ + AFIO_REMAP_FSMC_NADV = (AFIO_MAPR2_FSMC_NADV | + AFIO_REMAP_USE_MAPR2), /**< + NADV signal not connected */ + AFIO_REMAP_TIM14 = (AFIO_MAPR2_TIM14_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 14 remapping */ + AFIO_REMAP_TIM13 = (AFIO_MAPR2_TIM13_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 13 remapping */ + AFIO_REMAP_TIM11 = (AFIO_MAPR2_TIM11_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 11 remapping */ + AFIO_REMAP_TIM10 = (AFIO_MAPR2_TIM10_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 10 remapping */ + AFIO_REMAP_TIM9 = (AFIO_MAPR2_TIM9_REMAP | + AFIO_REMAP_USE_MAPR2) /**< + Timer 9 */ +} afio_remap_peripheral; + +void afio_remap(afio_remap_peripheral p); + +/** + * @brief Debug port configuration + * + * Used to configure the behavior of JTAG and Serial Wire (SW) debug + * ports and their associated GPIO pins. + * + * @see afio_cfg_debug_ports() + */ +typedef enum afio_debug_cfg { + AFIO_DEBUG_FULL_SWJ = AFIO_MAPR_SWJ_CFG_FULL_SWJ, /**< + Full Serial Wire and JTAG debug */ + AFIO_DEBUG_FULL_SWJ_NO_NJRST = AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST, /**< + Full Serial Wire and JTAG, but no NJTRST. */ + AFIO_DEBUG_SW_ONLY = AFIO_MAPR_SWJ_CFG_NO_JTAG_SW, /**< + Serial Wire debug only (JTAG-DP disabled, + SW-DP enabled) */ + AFIO_DEBUG_NONE = AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW /**< + No debug; all JTAG and SW pins are free + for use as GPIOs. */ +} afio_debug_cfg; + +/** + * @brief Enable or disable the JTAG and SW debug ports. + * @param config Desired debug port configuration + * @see afio_debug_cfg + */ +static inline void afio_cfg_debug_ports(afio_debug_cfg config) { + __io uint32 *mapr = &AFIO_BASE->MAPR; + *mapr = (*mapr & ~AFIO_MAPR_SWJ_CFG) | config; +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/nvic.h b/libmaple/stm32f1/include/series/nvic.h new file mode 100644 index 0000000..69fd945 --- /dev/null +++ b/libmaple/stm32f1/include/series/nvic.h @@ -0,0 +1,139 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/nvic.h + * @brief STM32F1 Nested Vectored Interrupt Controller (NVIC) support. + */ + +#ifndef _LIBMAPLE_STM32F1_NVIC_H_ +#define _LIBMAPLE_STM32F1_NVIC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/** + * @brief Interrupt vector table interrupt numbers. + * @see <libmaple/scb.h> + */ +typedef enum nvic_irq_num { + NVIC_NMI = -14, /**< Non-maskable interrupt */ + NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ + NVIC_MEM_MANAGE = -12, /**< Memory management */ + NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory + access fault. */ + NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or + illegal state. */ + NVIC_SVC = -5, /**< System service call via SWI insruction */ + NVIC_DEBUG_MON = -4, /**< Debug monitor */ + NVIC_PEND_SVC = -2, /**< Pendable request for system service */ + NVIC_SYSTICK = -1, /**< System tick timer */ + NVIC_WWDG = 0, /**< Window watchdog interrupt */ + NVIC_PVD = 1, /**< PVD through EXTI line detection */ + NVIC_TAMPER = 2, /**< Tamper */ + NVIC_RTC = 3, /**< Real-time clock */ + NVIC_FLASH = 4, /**< Flash */ + NVIC_RCC = 5, /**< Reset and clock control */ + NVIC_EXTI0 = 6, /**< EXTI line 0 */ + NVIC_EXTI1 = 7, /**< EXTI line 1 */ + NVIC_EXTI2 = 8, /**< EXTI line 2 */ + NVIC_EXTI3 = 9, /**< EXTI line 3 */ + NVIC_EXTI4 = 10, /**< EXTI line 4 */ + NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ + NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ + NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ + NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ + NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ + NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ + NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ + NVIC_ADC_1_2 = 18, /**< ADC1 and ADC2 */ + NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ + NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ + NVIC_CAN_RX1 = 21, /**< CAN RX1 */ + NVIC_CAN_SCE = 22, /**< CAN SCE */ + NVIC_EXTI_9_5 = 23, /**< EXTI line [9:5] */ + NVIC_TIMER1_BRK = 24, /**< Timer 1 break */ + NVIC_TIMER1_UP = 25, /**< Timer 1 update */ + NVIC_TIMER1_TRG_COM = 26, /**< Timer 1 trigger and commutation */ + NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ + NVIC_TIMER2 = 28, /**< Timer 2 */ + NVIC_TIMER3 = 29, /**< Timer 3 */ + NVIC_TIMER4 = 30, /**< Timer 4 */ + NVIC_I2C1_EV = 31, /**< I2C1 event */ + NVIC_I2C1_ER = 32, /**< I2C1 error */ + NVIC_I2C2_EV = 33, /**< I2C2 event */ + NVIC_I2C2_ER = 34, /**< I2C2 error */ + NVIC_SPI1 = 35, /**< SPI1 */ + NVIC_SPI2 = 36, /**< SPI2 */ + NVIC_USART1 = 37, /**< USART1 */ + NVIC_USART2 = 38, /**< USART2 */ + NVIC_USART3 = 39, /**< USART3 */ + NVIC_EXTI_15_10 = 40, /**< EXTI line [15:10] */ + NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ + NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through + EXTI line */ + NVIC_TIMER8_BRK = 43, /**< Timer 8 break */ + NVIC_TIMER8_UP = 44, /**< Timer 8 update */ + NVIC_TIMER8_TRG_COM = 45, /**< Timer 8 trigger and commutation */ + NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ +#ifdef STM32_HIGH_DENSITY + NVIC_ADC3 = 47, /**< ADC3 */ + NVIC_FSMC = 48, /**< FSMC */ + NVIC_SDIO = 49, /**< SDIO */ + NVIC_TIMER5 = 50, /**< Timer 5 */ + NVIC_SPI3 = 51, /**< SPI3 */ + NVIC_UART4 = 52, /**< UART4 */ + NVIC_UART5 = 53, /**< UART5 */ + NVIC_TIMER6 = 54, /**< Timer 6 */ + NVIC_TIMER7 = 55, /**< Timer 7 */ + NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ + NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ + NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ + NVIC_DMA2_CH_4_5 = 59, /**< DMA2 channels 4 and 5 */ +#endif +} nvic_irq_num; + +static inline void nvic_irq_disable_all(void) { + /* Note: This only works up to XL density. The fix for + * connectivity line is: + * + * NVIC_BASE->ICER[2] = 0xF; + * + * We don't support connectivity line devices (yet), so leave it + * alone for now. + */ + NVIC_BASE->ICER[0] = 0xFFFFFFFF; + NVIC_BASE->ICER[1] = 0xFFFFFFFF; +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/rcc.h b/libmaple/stm32f1/include/series/rcc.h new file mode 100644 index 0000000..261dc5d --- /dev/null +++ b/libmaple/stm32f1/include/series/rcc.h @@ -0,0 +1,553 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/rcc.h + * @brief STM32F1 reset and clock control (RCC) header. + */ + +#ifndef _LIBMAPLE_STM32F1_RCC_H_ +#define _LIBMAPLE_STM32F1_RCC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +/* + * Register map + */ + +/** RCC register map type */ +typedef struct rcc_reg_map { + __io uint32 CR; /**< Clock control register */ + __io uint32 CFGR; /**< Clock configuration register */ + __io uint32 CIR; /**< Clock interrupt register */ + __io uint32 APB2RSTR; /**< APB2 peripheral reset register */ + __io uint32 APB1RSTR; /**< APB1 peripheral reset register */ + __io uint32 AHBENR; /**< AHB peripheral clock enable register */ + __io uint32 APB2ENR; /**< APB2 peripheral clock enable register */ + __io uint32 APB1ENR; /**< APB1 peripheral clock enable register */ + __io uint32 BDCR; /**< Backup domain control register */ + __io uint32 CSR; /**< Control/status register */ +} rcc_reg_map; + +/** RCC register map base pointer */ +#define RCC_BASE ((struct rcc_reg_map*)0x40021000) + +/* + * Register bit definitions + */ + +/* Clock control register */ + +#define RCC_CR_PLLRDY_BIT 25 +#define RCC_CR_PLLON_BIT 24 +#define RCC_CR_CSSON_BIT 19 +#define RCC_CR_HSEBYP_BIT 18 +#define RCC_CR_HSERDY_BIT 17 +#define RCC_CR_HSEON_BIT 16 +#define RCC_CR_HSIRDY_BIT 1 +#define RCC_CR_HSION_BIT 0 + +#define RCC_CR_PLLRDY BIT(RCC_CR_PLLRDY_BIT) +#define RCC_CR_PLLON BIT(RCC_CR_PLLON_BIT) +#define RCC_CR_CSSON BIT(RCC_CR_CSSON_BIT) +#define RCC_CR_HSEBYP BIT(RCC_CR_HSEBYP_BIT) +#define RCC_CR_HSERDY BIT(RCC_CR_HSERDY_BIT) +#define RCC_CR_HSEON BIT(RCC_CR_HSEON_BIT) +#define RCC_CR_HSICAL (0xFF << 8) +#define RCC_CR_HSITRIM (0x1F << 3) +#define RCC_CR_HSIRDY BIT(RCC_CR_HSIRDY_BIT) +#define RCC_CR_HSION BIT(RCC_CR_HSION_BIT) + +/* Clock configuration register */ + +#define RCC_CFGR_USBPRE_BIT 22 +#define RCC_CFGR_PLLXTPRE_BIT 17 +#define RCC_CFGR_PLLSRC_BIT 16 + +#define RCC_CFGR_MCO (0x3 << 24) +#define RCC_CFGR_USBPRE BIT(RCC_CFGR_USBPRE_BIT) +#define RCC_CFGR_PLLMUL (0xF << 18) +#define RCC_CFGR_PLLXTPRE BIT(RCC_CFGR_PLLXTPRE_BIT) +#define RCC_CFGR_PLLSRC BIT(RCC_CFGR_PLLSRC_BIT) +#define RCC_CFGR_ADCPRE (0x3 << 14) +#define RCC_CFGR_PPRE2 (0x7 << 11) +#define RCC_CFGR_PPRE1 (0x7 << 8) +#define RCC_CFGR_HPRE (0xF << 4) +#define RCC_CFGR_SWS (0x3 << 2) +#define RCC_CFGR_SWS_PLL (0x2 << 2) +#define RCC_CFGR_SWS_HSE (0x1 << 2) +#define RCC_CFGR_SW 0x3 +#define RCC_CFGR_SW_PLL 0x2 +#define RCC_CFGR_SW_HSE 0x1 + +/* Clock interrupt register */ + +#define RCC_CIR_CSSC_BIT 23 +#define RCC_CIR_PLLRDYC_BIT 20 +#define RCC_CIR_HSERDYC_BIT 19 +#define RCC_CIR_HSIRDYC_BIT 18 +#define RCC_CIR_LSERDYC_BIT 17 +#define RCC_CIR_LSIRDYC_BIT 16 +#define RCC_CIR_PLLRDYIE_BIT 12 +#define RCC_CIR_HSERDYIE_BIT 11 +#define RCC_CIR_HSIRDYIE_BIT 10 +#define RCC_CIR_LSERDYIE_BIT 9 +#define RCC_CIR_LSIRDYIE_BIT 8 +#define RCC_CIR_CSSF_BIT 7 +#define RCC_CIR_PLLRDYF_BIT 4 +#define RCC_CIR_HSERDYF_BIT 3 +#define RCC_CIR_HSIRDYF_BIT 2 +#define RCC_CIR_LSERDYF_BIT 1 +#define RCC_CIR_LSIRDYF_BIT 0 + +#define RCC_CIR_CSSC BIT(RCC_CIR_CSSC_BIT) +#define RCC_CIR_PLLRDYC BIT(RCC_CIR_PLLRDYC_BIT) +#define RCC_CIR_HSERDYC BIT(RCC_CIR_HSERDYC_BIT) +#define RCC_CIR_HSIRDYC BIT(RCC_CIR_HSIRDYC_BIT) +#define RCC_CIR_LSERDYC BIT(RCC_CIR_LSERDYC_BIT) +#define RCC_CIR_LSIRDYC BIT(RCC_CIR_LSIRDYC_BIT) +#define RCC_CIR_PLLRDYIE BIT(RCC_CIR_PLLRDYIE_BIT) +#define RCC_CIR_HSERDYIE BIT(RCC_CIR_HSERDYIE_BIT) +#define RCC_CIR_HSIRDYIE BIT(RCC_CIR_HSIRDYIE_BIT) +#define RCC_CIR_LSERDYIE BIT(RCC_CIR_LSERDYIE_BIT) +#define RCC_CIR_LSIRDYIE BIT(RCC_CIR_LSIRDYIE_BIT) +#define RCC_CIR_CSSF BIT(RCC_CIR_CSSF_BIT) +#define RCC_CIR_PLLRDYF BIT(RCC_CIR_PLLRDYF_BIT) +#define RCC_CIR_HSERDYF BIT(RCC_CIR_HSERDYF_BIT) +#define RCC_CIR_HSIRDYF BIT(RCC_CIR_HSIRDYF_BIT) +#define RCC_CIR_LSERDYF BIT(RCC_CIR_LSERDYF_BIT) +#define RCC_CIR_LSIRDYF BIT(RCC_CIR_LSIRDYF_BIT) + +/* APB2 peripheral reset register */ + +#define RCC_APB2RSTR_TIM11RST_BIT 21 +#define RCC_APB2RSTR_TIM10RST_BIT 20 +#define RCC_APB2RSTR_TIM9RST_BIT 19 +#define RCC_APB2RSTR_ADC3RST_BIT 15 +#define RCC_APB2RSTR_USART1RST_BIT 14 +#define RCC_APB2RSTR_TIM8RST_BIT 13 +#define RCC_APB2RSTR_SPI1RST_BIT 12 +#define RCC_APB2RSTR_TIM1RST_BIT 11 +#define RCC_APB2RSTR_ADC2RST_BIT 10 +#define RCC_APB2RSTR_ADC1RST_BIT 9 +#define RCC_APB2RSTR_IOPGRST_BIT 8 +#define RCC_APB2RSTR_IOPFRST_BIT 7 +#define RCC_APB2RSTR_IOPERST_BIT 6 +#define RCC_APB2RSTR_IOPDRST_BIT 5 +#define RCC_APB2RSTR_IOPCRST_BIT 4 +#define RCC_APB2RSTR_IOPBRST_BIT 3 +#define RCC_APB2RSTR_IOPARST_BIT 2 +#define RCC_APB2RSTR_AFIORST_BIT 0 + +#define RCC_APB2RSTR_TIM11RST BIT(RCC_APB2RSTR_TIM11RST_BIT) +#define RCC_APB2RSTR_TIM10RST BIT(RCC_APB2RSTR_TIM10RST_BIT) +#define RCC_APB2RSTR_TIM9RST BIT(RCC_APB2RSTR_TIM9RST_BIT) +#define RCC_APB2RSTR_ADC3RST BIT(RCC_APB2RSTR_ADC3RST_BIT) +#define RCC_APB2RSTR_USART1RST BIT(RCC_APB2RSTR_USART1RST_BIT) +#define RCC_APB2RSTR_TIM8RST BIT(RCC_APB2RSTR_TIM8RST_BIT) +#define RCC_APB2RSTR_SPI1RST BIT(RCC_APB2RSTR_SPI1RST_BIT) +#define RCC_APB2RSTR_TIM1RST BIT(RCC_APB2RSTR_TIM1RST_BIT) +#define RCC_APB2RSTR_ADC2RST BIT(RCC_APB2RSTR_ADC2RST_BIT) +#define RCC_APB2RSTR_ADC1RST BIT(RCC_APB2RSTR_ADC1RST_BIT) +#define RCC_APB2RSTR_IOPGRST BIT(RCC_APB2RSTR_IOPGRST_BIT) +#define RCC_APB2RSTR_IOPFRST BIT(RCC_APB2RSTR_IOPFRST_BIT) +#define RCC_APB2RSTR_IOPERST BIT(RCC_APB2RSTR_IOPERST_BIT) +#define RCC_APB2RSTR_IOPDRST BIT(RCC_APB2RSTR_IOPDRST_BIT) +#define RCC_APB2RSTR_IOPCRST BIT(RCC_APB2RSTR_IOPCRST_BIT) +#define RCC_APB2RSTR_IOPBRST BIT(RCC_APB2RSTR_IOPBRST_BIT) +#define RCC_APB2RSTR_IOPARST BIT(RCC_APB2RSTR_IOPARST_BIT) +#define RCC_APB2RSTR_AFIORST BIT(RCC_APB2RSTR_AFIORST_BIT) + +/* APB1 peripheral reset register */ + +#define RCC_APB1RSTR_DACRST_BIT 29 +#define RCC_APB1RSTR_PWRRST_BIT 28 +#define RCC_APB1RSTR_BKPRST_BIT 27 +#define RCC_APB1RSTR_CANRST_BIT 25 +#define RCC_APB1RSTR_USBRST_BIT 23 +#define RCC_APB1RSTR_I2C2RST_BIT 22 +#define RCC_APB1RSTR_I2C1RST_BIT 21 +#define RCC_APB1RSTR_UART5RST_BIT 20 +#define RCC_APB1RSTR_UART4RST_BIT 19 +#define RCC_APB1RSTR_USART3RST_BIT 18 +#define RCC_APB1RSTR_USART2RST_BIT 17 +#define RCC_APB1RSTR_SPI3RST_BIT 15 +#define RCC_APB1RSTR_SPI2RST_BIT 14 +#define RCC_APB1RSTR_WWDRST_BIT 11 +#define RCC_APB1RSTR_TIM14RST_BIT 8 +#define RCC_APB1RSTR_TIM13RST_BIT 7 +#define RCC_APB1RSTR_TIM12RST_BIT 6 +#define RCC_APB1RSTR_TIM7RST_BIT 5 +#define RCC_APB1RSTR_TIM6RST_BIT 4 +#define RCC_APB1RSTR_TIM5RST_BIT 3 +#define RCC_APB1RSTR_TIM4RST_BIT 2 +#define RCC_APB1RSTR_TIM3RST_BIT 1 +#define RCC_APB1RSTR_TIM2RST_BIT 0 + +#define RCC_APB1RSTR_DACRST BIT(RCC_APB1RSTR_DACRST_BIT) +#define RCC_APB1RSTR_PWRRST BIT(RCC_APB1RSTR_PWRRST_BIT) +#define RCC_APB1RSTR_BKPRST BIT(RCC_APB1RSTR_BKPRST_BIT) +#define RCC_APB1RSTR_CANRST BIT(RCC_APB1RSTR_CANRST_BIT) +#define RCC_APB1RSTR_USBRST BIT(RCC_APB1RSTR_USBRST_BIT) +#define RCC_APB1RSTR_I2C2RST BIT(RCC_APB1RSTR_I2C2RST_BIT) +#define RCC_APB1RSTR_I2C1RST BIT(RCC_APB1RSTR_I2C1RST_BIT) +#define RCC_APB1RSTR_UART5RST BIT(RCC_APB1RSTR_UART5RST_BIT) +#define RCC_APB1RSTR_UART4RST BIT(RCC_APB1RSTR_UART4RST_BIT) +#define RCC_APB1RSTR_USART3RST BIT(RCC_APB1RSTR_USART3RST_BIT) +#define RCC_APB1RSTR_USART2RST BIT(RCC_APB1RSTR_USART2RST_BIT) +#define RCC_APB1RSTR_SPI3RST BIT(RCC_APB1RSTR_SPI3RST_BIT) +#define RCC_APB1RSTR_SPI2RST BIT(RCC_APB1RSTR_SPI2RST_BIT) +#define RCC_APB1RSTR_WWDRST BIT(RCC_APB1RSTR_WWDRST_BIT) +#define RCC_APB1RSTR_TIM14RST BIT(RCC_APB1RSTR_TIM14RST_BIT) +#define RCC_APB1RSTR_TIM13RST BIT(RCC_APB1RSTR_TIM13RST_BIT) +#define RCC_APB1RSTR_TIM12RST BIT(RCC_APB1RSTR_TIM12RST_BIT) +#define RCC_APB1RSTR_TIM7RST BIT(RCC_APB1RSTR_TIM7RST_BIT) +#define RCC_APB1RSTR_TIM6RST BIT(RCC_APB1RSTR_TIM6RST_BIT) +#define RCC_APB1RSTR_TIM5RST BIT(RCC_APB1RSTR_TIM5RST_BIT) +#define RCC_APB1RSTR_TIM4RST BIT(RCC_APB1RSTR_TIM4RST_BIT) +#define RCC_APB1RSTR_TIM3RST BIT(RCC_APB1RSTR_TIM3RST_BIT) +#define RCC_APB1RSTR_TIM2RST BIT(RCC_APB1RSTR_TIM2RST_BIT) + +/* AHB peripheral clock enable register */ + +#define RCC_AHBENR_SDIOEN_BIT 10 +#define RCC_AHBENR_FSMCEN_BIT 8 +#define RCC_AHBENR_CRCEN_BIT 7 +#define RCC_AHBENR_FLITFEN_BIT 4 +#define RCC_AHBENR_SRAMEN_BIT 2 +#define RCC_AHBENR_DMA2EN_BIT 1 +#define RCC_AHBENR_DMA1EN_BIT 0 + +#define RCC_AHBENR_SDIOEN BIT(RCC_AHBENR_SDIOEN_BIT) +#define RCC_AHBENR_FSMCEN BIT(RCC_AHBENR_FSMCEN_BIT) +#define RCC_AHBENR_CRCEN BIT(RCC_AHBENR_CRCEN_BIT) +#define RCC_AHBENR_FLITFEN BIT(RCC_AHBENR_FLITFEN_BIT) +#define RCC_AHBENR_SRAMEN BIT(RCC_AHBENR_SRAMEN_BIT) +#define RCC_AHBENR_DMA2EN BIT(RCC_AHBENR_DMA2EN_BIT) +#define RCC_AHBENR_DMA1EN BIT(RCC_AHBENR_DMA1EN_BIT) + +/* APB2 peripheral clock enable register */ + +#define RCC_APB2ENR_TIM11EN_BIT 21 +#define RCC_APB2ENR_TIM10EN_BIT 20 +#define RCC_APB2ENR_TIM9EN_BIT 19 +#define RCC_APB2ENR_ADC3EN_BIT 15 +#define RCC_APB2ENR_USART1EN_BIT 14 +#define RCC_APB2ENR_TIM8EN_BIT 13 +#define RCC_APB2ENR_SPI1EN_BIT 12 +#define RCC_APB2ENR_TIM1EN_BIT 11 +#define RCC_APB2ENR_ADC2EN_BIT 10 +#define RCC_APB2ENR_ADC1EN_BIT 9 +#define RCC_APB2ENR_IOPGEN_BIT 8 +#define RCC_APB2ENR_IOPFEN_BIT 7 +#define RCC_APB2ENR_IOPEEN_BIT 6 +#define RCC_APB2ENR_IOPDEN_BIT 5 +#define RCC_APB2ENR_IOPCEN_BIT 4 +#define RCC_APB2ENR_IOPBEN_BIT 3 +#define RCC_APB2ENR_IOPAEN_BIT 2 +#define RCC_APB2ENR_AFIOEN_BIT 0 + +#define RCC_APB2ENR_TIM11EN BIT(RCC_APB2ENR_TIM11EN_BIT) +#define RCC_APB2ENR_TIM10EN BIT(RCC_APB2ENR_TIM10EN_BIT) +#define RCC_APB2ENR_TIM9EN BIT(RCC_APB2ENR_TIM9EN_BIT) +#define RCC_APB2ENR_ADC3EN BIT(RCC_APB2ENR_ADC3EN_BIT) +#define RCC_APB2ENR_USART1EN BIT(RCC_APB2ENR_USART1EN_BIT) +#define RCC_APB2ENR_TIM8EN BIT(RCC_APB2ENR_TIM8EN_BIT) +#define RCC_APB2ENR_SPI1EN BIT(RCC_APB2ENR_SPI1EN_BIT) +#define RCC_APB2ENR_TIM1EN BIT(RCC_APB2ENR_TIM1EN_BIT) +#define RCC_APB2ENR_ADC2EN BIT(RCC_APB2ENR_ADC2EN_BIT) +#define RCC_APB2ENR_ADC1EN BIT(RCC_APB2ENR_ADC1EN_BIT) +#define RCC_APB2ENR_IOPGEN BIT(RCC_APB2ENR_IOPGEN_BIT) +#define RCC_APB2ENR_IOPFEN BIT(RCC_APB2ENR_IOPFEN_BIT) +#define RCC_APB2ENR_IOPEEN BIT(RCC_APB2ENR_IOPEEN_BIT) +#define RCC_APB2ENR_IOPDEN BIT(RCC_APB2ENR_IOPDEN_BIT) +#define RCC_APB2ENR_IOPCEN BIT(RCC_APB2ENR_IOPCEN_BIT) +#define RCC_APB2ENR_IOPBEN BIT(RCC_APB2ENR_IOPBEN_BIT) +#define RCC_APB2ENR_IOPAEN BIT(RCC_APB2ENR_IOPAEN_BIT) +#define RCC_APB2ENR_AFIOEN BIT(RCC_APB2ENR_AFIOEN_BIT) + +/* APB1 peripheral clock enable register */ + +#define RCC_APB1ENR_DACEN_BIT 29 +#define RCC_APB1ENR_PWREN_BIT 28 +#define RCC_APB1ENR_BKPEN_BIT 27 +#define RCC_APB1ENR_CANEN_BIT 25 +#define RCC_APB1ENR_USBEN_BIT 23 +#define RCC_APB1ENR_I2C2EN_BIT 22 +#define RCC_APB1ENR_I2C1EN_BIT 21 +#define RCC_APB1ENR_UART5EN_BIT 20 +#define RCC_APB1ENR_UART4EN_BIT 19 +#define RCC_APB1ENR_USART3EN_BIT 18 +#define RCC_APB1ENR_USART2EN_BIT 17 +#define RCC_APB1ENR_SPI3EN_BIT 15 +#define RCC_APB1ENR_SPI2EN_BIT 14 +#define RCC_APB1ENR_WWDEN_BIT 11 +#define RCC_APB1ENR_TIM14EN_BIT 8 +#define RCC_APB1ENR_TIM13EN_BIT 7 +#define RCC_APB1ENR_TIM12EN_BIT 6 +#define RCC_APB1ENR_TIM7EN_BIT 5 +#define RCC_APB1ENR_TIM6EN_BIT 4 +#define RCC_APB1ENR_TIM5EN_BIT 3 +#define RCC_APB1ENR_TIM4EN_BIT 2 +#define RCC_APB1ENR_TIM3EN_BIT 1 +#define RCC_APB1ENR_TIM2EN_BIT 0 + +#define RCC_APB1ENR_DACEN BIT(RCC_APB1ENR_DACEN_BIT) +#define RCC_APB1ENR_PWREN BIT(RCC_APB1ENR_PWREN_BIT) +#define RCC_APB1ENR_BKPEN BIT(RCC_APB1ENR_BKPEN_BIT) +#define RCC_APB1ENR_CANEN BIT(RCC_APB1ENR_CANEN_BIT) +#define RCC_APB1ENR_USBEN BIT(RCC_APB1ENR_USBEN_BIT) +#define RCC_APB1ENR_I2C2EN BIT(RCC_APB1ENR_I2C2EN_BIT) +#define RCC_APB1ENR_I2C1EN BIT(RCC_APB1ENR_I2C1EN_BIT) +#define RCC_APB1ENR_UART5EN BIT(RCC_APB1ENR_UART5EN_BIT) +#define RCC_APB1ENR_UART4EN BIT(RCC_APB1ENR_UART4EN_BIT) +#define RCC_APB1ENR_USART3EN BIT(RCC_APB1ENR_USART3EN_BIT) +#define RCC_APB1ENR_USART2EN BIT(RCC_APB1ENR_USART2EN_BIT) +#define RCC_APB1ENR_SPI3EN BIT(RCC_APB1ENR_SPI3EN_BIT) +#define RCC_APB1ENR_SPI2EN BIT(RCC_APB1ENR_SPI2EN_BIT) +#define RCC_APB1ENR_WWDEN BIT(RCC_APB1ENR_WWDEN_BIT) +#define RCC_APB1ENR_TIM14EN BIT(RCC_APB1ENR_TIM14EN_BIT) +#define RCC_APB1ENR_TIM13EN BIT(RCC_APB1ENR_TIM13EN_BIT) +#define RCC_APB1ENR_TIM12EN BIT(RCC_APB1ENR_TIM12EN_BIT) +#define RCC_APB1ENR_TIM7EN BIT(RCC_APB1ENR_TIM7EN_BIT) +#define RCC_APB1ENR_TIM6EN BIT(RCC_APB1ENR_TIM6EN_BIT) +#define RCC_APB1ENR_TIM5EN BIT(RCC_APB1ENR_TIM5EN_BIT) +#define RCC_APB1ENR_TIM4EN BIT(RCC_APB1ENR_TIM4EN_BIT) +#define RCC_APB1ENR_TIM3EN BIT(RCC_APB1ENR_TIM3EN_BIT) +#define RCC_APB1ENR_TIM2EN BIT(RCC_APB1ENR_TIM2EN_BIT) + +/* Backup domain control register */ + +#define RCC_BDCR_BDRST_BIT 16 +#define RCC_BDCR_RTCEN_BIT 15 +#define RCC_BDCR_LSEBYP_BIT 2 +#define RCC_BDCR_LSERDY_BIT 1 +#define RCC_BDCR_LSEON_BIT 0 + +#define RCC_BDCR_BDRST BIT(RCC_BDCR_BDRST_BIT) +#define RCC_BDCR_RTCEN BIT(RCC_BDCR_RTC_BIT) +#define RCC_BDCR_RTCSEL (0x3 << 8) +#define RCC_BDCR_RTCSEL_NONE (0x0 << 8) +#define RCC_BDCR_RTCSEL_LSE (0x1 << 8) +#define RCC_BDCR_RTCSEL_HSE (0x3 << 8) +#define RCC_BDCR_LSEBYP BIT(RCC_BDCR_LSEBYP_BIT) +#define RCC_BDCR_LSERDY BIT(RCC_BDCR_LSERDY_BIT) +#define RCC_BDCR_LSEON BIT(RCC_BDCR_LSEON_BIT) + +/* Control/status register */ + +#define RCC_CSR_LPWRRSTF_BIT 31 +#define RCC_CSR_WWDGRSTF_BIT 30 +#define RCC_CSR_IWDGRSTF_BIT 29 +#define RCC_CSR_SFTRSTF_BIT 28 +#define RCC_CSR_PORRSTF_BIT 27 +#define RCC_CSR_PINRSTF_BIT 26 +#define RCC_CSR_RMVF_BIT 24 +#define RCC_CSR_LSIRDY_BIT 1 +#define RCC_CSR_LSION_BIT 0 + +#define RCC_CSR_LPWRRSTF BIT(RCC_CSR_LPWRRSTF_BIT) +#define RCC_CSR_WWDGRSTF BIT(RCC_CSR_WWDGRSTF_BIT) +#define RCC_CSR_IWDGRSTF BIT(RCC_CSR_IWDGRSTF_BIT) +#define RCC_CSR_SFTRSTF BIT(RCC_CSR_SFTRSTF_BIT) +#define RCC_CSR_PORRSTF BIT(RCC_CSR_PORRSTF_BIT) +#define RCC_CSR_PINRSTF BIT(RCC_CSR_PINRSTF_BIT) +#define RCC_CSR_RMVF BIT(RCC_CSR_RMVF_BIT) +#define RCC_CSR_LSIRDY BIT(RCC_CSR_LSIRDY_BIT) +#define RCC_CSR_LSION BIT(RCC_CSR_LSION_BIT) + +/* + * Other types + */ + +/** + * @brief Identifies bus and clock line for a peripheral. + * + * Also generally useful as a unique identifier for that peripheral + * (or its corresponding device struct). + */ +typedef enum rcc_clk_id { + RCC_GPIOA, + RCC_GPIOB, + RCC_GPIOC, + RCC_GPIOD, + RCC_AFIO, + RCC_ADC1, + RCC_ADC2, + RCC_ADC3, + RCC_USART1, + RCC_USART2, + RCC_USART3, + RCC_TIMER1, + RCC_TIMER2, + RCC_TIMER3, + RCC_TIMER4, + RCC_SPI1, + RCC_SPI2, + RCC_DMA1, + RCC_PWR, + RCC_BKP, + RCC_I2C1, + RCC_I2C2, + RCC_CRC, + RCC_FLITF, + RCC_SRAM, + RCC_USB, +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) + RCC_GPIOE, + RCC_GPIOF, + RCC_GPIOG, + RCC_UART4, + RCC_UART5, + RCC_TIMER5, + RCC_TIMER6, + RCC_TIMER7, + RCC_TIMER8, + RCC_FSMC, + RCC_DAC, + RCC_DMA2, + RCC_SDIO, + RCC_SPI3, +#endif +#ifdef STM32_XL_DENSITY + RCC_TIMER9, + RCC_TIMER10, + RCC_TIMER11, + RCC_TIMER12, + RCC_TIMER13, + RCC_TIMER14, +#endif +} rcc_clk_id; + +/** + * PLL multipliers + * @see rcc_clk_init() + */ +typedef enum rcc_pll_multiplier { + RCC_PLLMUL_2 = (0x0 << 18), + RCC_PLLMUL_3 = (0x1 << 18), + RCC_PLLMUL_4 = (0x2 << 18), + RCC_PLLMUL_5 = (0x3 << 18), + RCC_PLLMUL_6 = (0x4 << 18), + RCC_PLLMUL_7 = (0x5 << 18), + RCC_PLLMUL_8 = (0x6 << 18), + RCC_PLLMUL_9 = (0x7 << 18), + RCC_PLLMUL_10 = (0x8 << 18), + RCC_PLLMUL_11 = (0x9 << 18), + RCC_PLLMUL_12 = (0xA << 18), + RCC_PLLMUL_13 = (0xB << 18), + RCC_PLLMUL_14 = (0xC << 18), + RCC_PLLMUL_15 = (0xD << 18), + RCC_PLLMUL_16 = (0xE << 18), +} rcc_pll_multiplier; + +/** + * PLL entry clock source + * @see rcc_clk_init() + */ +typedef enum rcc_pllsrc { + RCC_PLLSRC_HSE = (0x1 << 16), + RCC_PLLSRC_HSI_DIV_2 = (0x0 << 16) +} rcc_pllsrc; + +typedef enum rcc_clk_domain { + RCC_APB1, + RCC_APB2, + RCC_AHB +} rcc_clk_domain; + +/** + * Prescaler identifiers + * @see rcc_set_prescaler() + */ +typedef enum rcc_prescaler { + RCC_PRESCALER_AHB, + RCC_PRESCALER_APB1, + RCC_PRESCALER_APB2, + RCC_PRESCALER_USB, + RCC_PRESCALER_ADC +} rcc_prescaler; + +/** + * ADC prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_adc_divider { + RCC_ADCPRE_PCLK_DIV_2 = 0x0 << 14, + RCC_ADCPRE_PCLK_DIV_4 = 0x1 << 14, + RCC_ADCPRE_PCLK_DIV_6 = 0x2 << 14, + RCC_ADCPRE_PCLK_DIV_8 = 0x3 << 14, +} rcc_adc_divider; + +/** + * APB1 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb1_divider { + RCC_APB1_HCLK_DIV_1 = 0x0 << 8, + RCC_APB1_HCLK_DIV_2 = 0x4 << 8, + RCC_APB1_HCLK_DIV_4 = 0x5 << 8, + RCC_APB1_HCLK_DIV_8 = 0x6 << 8, + RCC_APB1_HCLK_DIV_16 = 0x7 << 8, +} rcc_apb1_divider; + +/** + * APB2 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb2_divider { + RCC_APB2_HCLK_DIV_1 = 0x0 << 11, + RCC_APB2_HCLK_DIV_2 = 0x4 << 11, + RCC_APB2_HCLK_DIV_4 = 0x5 << 11, + RCC_APB2_HCLK_DIV_8 = 0x6 << 11, + RCC_APB2_HCLK_DIV_16 = 0x7 << 11, +} rcc_apb2_divider; + +/** + * AHB prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_ahb_divider { + RCC_AHB_SYSCLK_DIV_1 = 0x0 << 4, + RCC_AHB_SYSCLK_DIV_2 = 0x8 << 4, + RCC_AHB_SYSCLK_DIV_4 = 0x9 << 4, + RCC_AHB_SYSCLK_DIV_8 = 0xA << 4, + RCC_AHB_SYSCLK_DIV_16 = 0xB << 4, + RCC_AHB_SYSCLK_DIV_32 = 0xC << 4, + RCC_AHB_SYSCLK_DIV_64 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_128 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_256 = 0xE << 4, + RCC_AHB_SYSCLK_DIV_512 = 0xF << 4, +} rcc_ahb_divider; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/stm32.h b/libmaple/stm32f1/include/series/stm32.h new file mode 100644 index 0000000..f0ca616 --- /dev/null +++ b/libmaple/stm32f1/include/series/stm32.h @@ -0,0 +1,100 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010, 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/stm32.h + * @brief STM32F1 chip- and series-specific definitions. + */ + +#ifndef _LIBMAPLE_STM32F1_H_ +#define _LIBMAPLE_STM32F1_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Clock configuration. + */ + +#ifndef STM32_PCLK1 +#define STM32_PCLK1 36000000U +#endif + +#ifndef STM32_PCLK2 +#define STM32_PCLK2 72000000U +#endif + +#ifndef STM32_DELAY_US_MULT +#define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */ +#endif + +/* + * Density-specific values. + */ + +#ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 43 +#elif defined(STM32_HIGH_DENSITY) +# define STM32_NR_INTERRUPTS 60 +#else +#error "Unsupported STM32F1 density, or no density specified. Add something " \ + "like -DSTM32_MEDIUM_DENSITY to your compiler arguments." +#endif + +/* + * MCU-specific values. + */ + +#if defined(MCU_STM32F103RB) +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20005000) + +#elif defined(MCU_STM32F103ZE) +# define STM32_NR_GPIO_PORTS 7 +# define STM32_SRAM_END ((void*)0x20010000) + +#elif defined(MCU_STM32F103CB) + /* This STM32_NR_GPIO_PORTS is not stricly true, but only pins 0 + * and exist, and they're used for OSC (e.g. on e.g. LeafLabs + * Maple Mini), so we'll live with this for now. */ +# define STM32_NR_GPIO_PORTS 3 +# define STM32_SRAM_END ((void*)0x20005000) + +#elif defined(MCU_STM32F103RE) +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20010000) + +#else +#error "Unrecognized STM32F1 MCU, or no MCU specified. Add something like " \ + "-DMCU_STM32F103RB to your compiler arguments." +#endif + +#ifdef __cplusplus +} +#endif + +#endif |