diff options
Diffstat (limited to 'libmaple/stm32f1/include/family')
| -rw-r--r-- | libmaple/stm32f1/include/family/nvic.h | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/libmaple/stm32f1/include/family/nvic.h b/libmaple/stm32f1/include/family/nvic.h new file mode 100644 index 0000000..69fd945 --- /dev/null +++ b/libmaple/stm32f1/include/family/nvic.h @@ -0,0 +1,139 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/nvic.h + * @brief STM32F1 Nested Vectored Interrupt Controller (NVIC) support. + */ + +#ifndef _LIBMAPLE_STM32F1_NVIC_H_ +#define _LIBMAPLE_STM32F1_NVIC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/** + * @brief Interrupt vector table interrupt numbers. + * @see <libmaple/scb.h> + */ +typedef enum nvic_irq_num { + NVIC_NMI = -14, /**< Non-maskable interrupt */ + NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ + NVIC_MEM_MANAGE = -12, /**< Memory management */ + NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory + access fault. */ + NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or + illegal state. */ + NVIC_SVC = -5, /**< System service call via SWI insruction */ + NVIC_DEBUG_MON = -4, /**< Debug monitor */ + NVIC_PEND_SVC = -2, /**< Pendable request for system service */ + NVIC_SYSTICK = -1, /**< System tick timer */ + NVIC_WWDG = 0, /**< Window watchdog interrupt */ + NVIC_PVD = 1, /**< PVD through EXTI line detection */ + NVIC_TAMPER = 2, /**< Tamper */ + NVIC_RTC = 3, /**< Real-time clock */ + NVIC_FLASH = 4, /**< Flash */ + NVIC_RCC = 5, /**< Reset and clock control */ + NVIC_EXTI0 = 6, /**< EXTI line 0 */ + NVIC_EXTI1 = 7, /**< EXTI line 1 */ + NVIC_EXTI2 = 8, /**< EXTI line 2 */ + NVIC_EXTI3 = 9, /**< EXTI line 3 */ + NVIC_EXTI4 = 10, /**< EXTI line 4 */ + NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ + NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ + NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ + NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ + NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ + NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ + NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ + NVIC_ADC_1_2 = 18, /**< ADC1 and ADC2 */ + NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ + NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ + NVIC_CAN_RX1 = 21, /**< CAN RX1 */ + NVIC_CAN_SCE = 22, /**< CAN SCE */ + NVIC_EXTI_9_5 = 23, /**< EXTI line [9:5] */ + NVIC_TIMER1_BRK = 24, /**< Timer 1 break */ + NVIC_TIMER1_UP = 25, /**< Timer 1 update */ + NVIC_TIMER1_TRG_COM = 26, /**< Timer 1 trigger and commutation */ + NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ + NVIC_TIMER2 = 28, /**< Timer 2 */ + NVIC_TIMER3 = 29, /**< Timer 3 */ + NVIC_TIMER4 = 30, /**< Timer 4 */ + NVIC_I2C1_EV = 31, /**< I2C1 event */ + NVIC_I2C1_ER = 32, /**< I2C1 error */ + NVIC_I2C2_EV = 33, /**< I2C2 event */ + NVIC_I2C2_ER = 34, /**< I2C2 error */ + NVIC_SPI1 = 35, /**< SPI1 */ + NVIC_SPI2 = 36, /**< SPI2 */ + NVIC_USART1 = 37, /**< USART1 */ + NVIC_USART2 = 38, /**< USART2 */ + NVIC_USART3 = 39, /**< USART3 */ + NVIC_EXTI_15_10 = 40, /**< EXTI line [15:10] */ + NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ + NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through + EXTI line */ + NVIC_TIMER8_BRK = 43, /**< Timer 8 break */ + NVIC_TIMER8_UP = 44, /**< Timer 8 update */ + NVIC_TIMER8_TRG_COM = 45, /**< Timer 8 trigger and commutation */ + NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ +#ifdef STM32_HIGH_DENSITY + NVIC_ADC3 = 47, /**< ADC3 */ + NVIC_FSMC = 48, /**< FSMC */ + NVIC_SDIO = 49, /**< SDIO */ + NVIC_TIMER5 = 50, /**< Timer 5 */ + NVIC_SPI3 = 51, /**< SPI3 */ + NVIC_UART4 = 52, /**< UART4 */ + NVIC_UART5 = 53, /**< UART5 */ + NVIC_TIMER6 = 54, /**< Timer 6 */ + NVIC_TIMER7 = 55, /**< Timer 7 */ + NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ + NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ + NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ + NVIC_DMA2_CH_4_5 = 59, /**< DMA2 channels 4 and 5 */ +#endif +} nvic_irq_num; + +static inline void nvic_irq_disable_all(void) { + /* Note: This only works up to XL density. The fix for + * connectivity line is: + * + * NVIC_BASE->ICER[2] = 0xF; + * + * We don't support connectivity line devices (yet), so leave it + * alone for now. + */ + NVIC_BASE->ICER[0] = 0xFFFFFFFF; + NVIC_BASE->ICER[1] = 0xFFFFFFFF; +} + +#ifdef __cplusplus +} +#endif + +#endif |