1 files changed, 112 insertions, 0 deletions
diff --git a/libmaple/stm32f1/adc.c b/libmaple/stm32f1/adc.c
new file mode 100644
index 0000000..ecfbc1c
--- /dev/null
+++ b/libmaple/stm32f1/adc.c
@@ -0,0 +1,112 @@
+/******************************************************************************
+ * The MIT License
+ *
+ * Copyright (c) 2012 LeafLabs, LLC.
+ * Copyright (c) 2010 Perry Hung.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *****************************************************************************/
+
+/**
+ * @file libmaple/stm32f1/adc.c
+ * @author Marti Bolivar <mbolivar@leaflabs.com>,
+ *         Perry Hung <perry@leaflabs.com>
+ * @brief STM32F1 ADC support.
+ */
+
+#include <libmaple/adc.h>
+#include <libmaple/gpio.h>
+
+/*
+ * Devices
+ */
+
+static adc_dev adc1 = {
+    .regs   = ADC1_BASE,
+    .clk_id = RCC_ADC1,
+};
+/** ADC1 device. */
+const adc_dev *ADC1 = &adc1;
+
+static adc_dev adc2 = {
+    .regs   = ADC2_BASE,
+    .clk_id = RCC_ADC2,
+};
+/** ADC2 device. */
+const adc_dev *ADC2 = &adc2;
+
+#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
+static adc_dev adc3 = {
+    .regs   = ADC3_BASE,
+    .clk_id = RCC_ADC3,
+};
+/** ADC3 device. */
+const adc_dev *ADC3 = &adc3;
+#endif
+
+/*
+ * STM32F1 routines
+ */
+
+/**
+ * @brief Calibrate an ADC peripheral
+ * @param dev adc device
+ */
+void adc_calibrate(const adc_dev *dev) {
+    __io uint32 *rstcal_bit = bb_perip(&(dev->regs->CR2), 3);
+    __io uint32 *cal_bit = bb_perip(&(dev->regs->CR2), 2);
+
+    *rstcal_bit = 1;
+    while (*rstcal_bit)
+        ;
+
+    *cal_bit = 1;
+    while (*cal_bit)
+        ;
+}
+
+/*
+ * Common routines
+ */
+
+void adc_set_prescaler(adc_prescaler pre) {
+    rcc_set_prescaler(RCC_PRESCALER_ADC, (uint32)pre);
+}
+
+void adc_foreach(void (*fn)(const adc_dev*)) {
+    fn(ADC1);
+    fn(ADC2);
+#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
+    fn(ADC3);
+#endif
+}
+
+void adc_config_gpio(const adc_dev *ignored, gpio_dev *gdev, uint8 bit) {
+    gpio_set_mode(gdev, bit, GPIO_INPUT_ANALOG);
+}
+
+void adc_enable_single_swstart(const adc_dev *dev) {
+    adc_init(dev);
+    adc_set_extsel(dev, ADC_SWSTART);
+    adc_set_exttrig(dev, 1);
+    adc_enable(dev);
+    adc_calibrate(dev);
+}