aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/libmaple.h
diff options
context:
space:
mode:
Diffstat (limited to 'libmaple/libmaple.h')
-rw-r--r--libmaple/libmaple.h163
1 files changed, 23 insertions, 140 deletions
diff --git a/libmaple/libmaple.h b/libmaple/libmaple.h
index 3e7fea9..6b75c96 100644
--- a/libmaple/libmaple.h
+++ b/libmaple/libmaple.h
@@ -24,164 +24,50 @@
/**
* @file libmaple.h
- *
- * @brief general include file for libmaple
+ * @brief General include file for libmaple
*/
#ifndef _LIBMAPLE_H_
#define _LIBMAPLE_H_
#include "libmaple_types.h"
-#include "stm32.h"
-
-/* General configuration */
-#define DEBUG_NONE 0
-#define DEBUG_FAULT 1
-#define DEBUG_ALL 2
+#include "util.h"
-#ifndef DEBUG_LEVEL
-#define DEBUG_LEVEL DEBUG_ALL
-#endif
+/*
+ * Where to put usercode, based on space reserved for bootloader.
+ *
+ * FIXME this has no business being here
+ */
+#define USER_ADDR_ROM 0x08005000
+#define USER_ADDR_RAM 0x20000C00
+#define STACK_TOP 0x20000800
/* MCU-specific configuration */
#if defined(MCU_STM32F103RB)
/* e.g., LeafLabs Maple */
/* Number of GPIO ports (GPIOA, GPIOB, etc.) */
- #define NR_GPIO_PORTS 4
-
- /* Total number of GPIO pins */
- #define NR_GPIO_PINS 39
-
- /* Number of 16-bit backup registers */
- #define NR_BKP_REGS 10
-
- /* Number of timer devices ports, definitely used */
- #define NR_TIMERS 4
-
- /* Number of USART ports */
- #define NR_USART 3
-
- /* Has an FSMC bus? */
- #define NR_FSMC 0
-
- /* Has a DAC? */
- #define NR_DAC_PINS 0
-
- /* Number of maskable interrupts */
- #define NR_INTERRUPTS 43
-
- /* USB Identifier numbers */
- /* Descriptor strings must be modified by hand in
- usb/descriptors.c for now */
- #define VCOM_ID_VENDOR 0x1EAF
- #define VCOM_ID_PRODUCT 0x0004
- #define USB_DISC_BANK GPIOC_BASE
- #define USB_DISC_PIN 12
- #define USB_CONFIG_MAX_POWER (100 >> 1)
- #define RESET_DELAY (100)
-
- /* Where to put usercode (based on space reserved for bootloader) */
- #define USER_ADDR_ROM 0x08005000
- #define USER_ADDR_RAM 0x20000C00
- #define STACK_TOP 0x20000800
-
- /* Debug port settings (from ASSERT) */
- #define ERROR_LED_PORT GPIOB_BASE
- #define ERROR_LED_PIN 12
- #define ERROR_USART_NUM USART2
- #define ERROR_USART_BAUD 9600
- #define ERROR_TX_PORT GPIOA_BASE
- #define ERROR_TX_PIN 2
-
- /* Just in case, most boards have at least some memory */
- #ifndef RAMSIZE
- # define RAMSIZE (caddr_t)0x50000
- #endif
-
- /* Bitbanded Memory sections */
- #define BITBAND_SRAM_REF 0x20000000
- #define BITBAND_SRAM_BASE 0x22000000
- #define BITBAND_PERI_REF 0x40000000
- #define BITBAND_PERI_BASE 0x42000000
+ #define NR_GPIO_PORTS 4
+
+ /* SRAM size, in bytes */
+ #define SRAM_SIZE 0x5000
#elif defined(MCU_STM32F103ZE)
/* e.g., LeafLabs Maple Native */
- #define NR_GPIO_PORTS 7
- #define NR_GPIO_PINS 100
- #define NR_BKP_REGS 42 /* TODO test on Native */
- #define NR_TIMERS 8
- #define NR_USART 5 /* NB: 4 and 5 are UART only */
- #define NR_FSMC 1
- #define NR_DAC_PINS 2
- #define NR_INTERRUPTS 60
-
- #define VCOM_ID_VENDOR 0x1EAF
- #define VCOM_ID_PRODUCT 0x0004
- #define USB_DISC_BANK GPIOB_BASE
- #define USB_DISC_PIN 8
- #define USB_CONFIG_MAX_POWER (100 >> 1)
- #define RESET_DELAY (100)
-
- #define USER_ADDR_ROM 0x08005000
- #define USER_ADDR_RAM 0x20000C00
- #define STACK_TOP 0x20000800
-
- #define ERROR_LED_PORT GPIOC_BASE
- #define ERROR_LED_PIN 15
- #define ERROR_USART_NUM USART1
- #define ERROR_USART_BAUD 9600
- #define ERROR_TX_PORT GPIOA_BASE
- #define ERROR_TX_PIN 10
-
- #ifndef RAMSIZE
- # define RAMSIZE (caddr_t)0x50000
- #endif
-
- #define BITBAND_SRAM_REF 0x20000000
- #define BITBAND_SRAM_BASE 0x22000000
- #define BITBAND_PERI_REF 0x40000000
- #define BITBAND_PERI_BASE 0x42000000
+ #define NR_GPIO_PORTS 7
+
+ #define SRAM_SIZE 0x10000
#elif defined(MCU_STM32F103CB)
/* e.g., LeafLabs Maple Mini */
- #define NR_GPIO_PORTS 3
- #define NR_GPIO_PINS 34
- #define NR_BKP_REGS 10 /* TODO test on Mini */
- #define NR_TIMERS 4
- #define NR_USART 3
- #define NR_FSMC 0
- #define NR_DAC_PINS 0
-
- #define VCOM_ID_VENDOR 0x1EAF
- #define VCOM_ID_PRODUCT 0x0005
- #define USB_DISC_BANK GPIOB_BASE
- #define USB_DISC_PIN 9
- #define USB_CONFIG_MAX_POWER (100 >> 1)
- #define RESET_DELAY 100
-
- #define USER_ADDR_ROM 0x08005000
- #define USER_ADDR_RAM 0x20000C00
- #define STACK_TOP 0x20000800
-
- #define ERROR_LED_PORT GPIOB_BASE
- #define ERROR_LED_PIN 12
- #define ERROR_USART_NUM USART2
- #define ERROR_USART_BAUD 9600
- #define ERROR_TX_PORT GPIOA_BASE
- #define ERROR_TX_PIN 2
-
- #ifndef RAMSIZE
- # define RAMSIZE (caddr_t)0x50000
- #endif
-
- /* Bitbanded Memory sections */
- #define BITBAND_SRAM_REF 0x20000000
- #define BITBAND_SRAM_BASE 0x22000000
- #define BITBAND_PERI_REF 0x40000000
- #define BITBAND_PERI_BASE 0x42000000
+ /* Note that this is not, strictly speaking, true. But only pins
+ 0 and 1 exist, and they're used for OSC on the Mini, so we'll
+ live with this for now. */
+ #define NR_GPIO_PORTS 3
+
+ #define SRAM_SIZE 0x5000
#else
@@ -190,8 +76,5 @@
#endif
-/* Requires board configuration info */
-#include "util.h"
-
#endif