diff options
Diffstat (limited to 'libmaple/include')
| -rw-r--r-- | libmaple/include/libmaple/nvic.h | 122 |
1 files changed, 11 insertions, 111 deletions
diff --git a/libmaple/include/libmaple/nvic.h b/libmaple/include/libmaple/nvic.h index d631eeb..afcb769 100644 --- a/libmaple/include/libmaple/nvic.h +++ b/libmaple/include/libmaple/nvic.h @@ -26,7 +26,7 @@ /** * @file nvic.h - * @brief Nested vector interrupt controller support. + * @brief Nested vectored interrupt controller support. * * Basic usage: * @@ -73,109 +73,20 @@ typedef struct nvic_reg_map { /** NVIC register map base pointer. */ #define NVIC_BASE ((struct nvic_reg_map*)0xE000E100) -/** - * @brief Interrupt vector table interrupt numbers. - * - * Each positive-valued enumerator is the position of the - * corresponding interrupt in the vector table. Negative-valued - * enumerators correspond to interrupts controlled by the system - * handler block. - * - * @see scb.h - */ -typedef enum nvic_irq_num { - NVIC_NMI = -14, /**< Non-maskable interrupt */ - NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ - NVIC_MEM_MANAGE = -12, /**< Memory management */ - NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory - access fault. */ - NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or - illegal state. */ - NVIC_SVC = -5, /**< System service call via SWI insruction */ - NVIC_DEBUG_MON = -4, /**< Debug monitor */ - NVIC_PEND_SVC = -2, /**< Pendable request for system service */ - NVIC_SYSTICK = -1, /**< System tick timer */ - NVIC_WWDG = 0, /**< Window watchdog interrupt */ - NVIC_PVD = 1, /**< PVD through EXTI line detection */ - NVIC_TAMPER = 2, /**< Tamper */ - NVIC_RTC = 3, /**< Real-time clock */ - NVIC_FLASH = 4, /**< Flash */ - NVIC_RCC = 5, /**< Reset and clock control */ - NVIC_EXTI0 = 6, /**< EXTI line 0 */ - NVIC_EXTI1 = 7, /**< EXTI line 1 */ - NVIC_EXTI2 = 8, /**< EXTI line 2 */ - NVIC_EXTI3 = 9, /**< EXTI line 3 */ - NVIC_EXTI4 = 10, /**< EXTI line 4 */ - NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ - NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ - NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ - NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ - NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ - NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ - NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ - NVIC_ADC_1_2 = 18, /**< ADC1 and ADC2 */ - NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ - NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ - NVIC_CAN_RX1 = 21, /**< CAN RX1 */ - NVIC_CAN_SCE = 22, /**< CAN SCE */ - NVIC_EXTI_9_5 = 23, /**< EXTI line [9:5] */ - NVIC_TIMER1_BRK = 24, /**< Timer 1 break */ - NVIC_TIMER1_UP = 25, /**< Timer 1 update */ - NVIC_TIMER1_TRG_COM = 26, /**< Timer 1 trigger and commutation */ - NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ - NVIC_TIMER2 = 28, /**< Timer 2 */ - NVIC_TIMER3 = 29, /**< Timer 3 */ - NVIC_TIMER4 = 30, /**< Timer 4 */ - NVIC_I2C1_EV = 31, /**< I2C1 event */ - NVIC_I2C1_ER = 32, /**< I2C1 error */ - NVIC_I2C2_EV = 33, /**< I2C2 event */ - NVIC_I2C2_ER = 34, /**< I2C2 error */ - NVIC_SPI1 = 35, /**< SPI1 */ - NVIC_SPI2 = 36, /**< SPI2 */ - NVIC_USART1 = 37, /**< USART1 */ - NVIC_USART2 = 38, /**< USART2 */ - NVIC_USART3 = 39, /**< USART3 */ - NVIC_EXTI_15_10 = 40, /**< EXTI line [15:10] */ - NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ - NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through - EXTI line */ - NVIC_TIMER8_BRK = 43, /**< Timer 8 break */ - NVIC_TIMER8_UP = 44, /**< Timer 8 update */ - NVIC_TIMER8_TRG_COM = 45, /**< Timer 8 trigger and commutation */ - NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ -#ifdef STM32_HIGH_DENSITY - NVIC_ADC3 = 47, /**< ADC3 */ - NVIC_FSMC = 48, /**< FSMC */ - NVIC_SDIO = 49, /**< SDIO */ - NVIC_TIMER5 = 50, /**< Timer 5 */ - NVIC_SPI3 = 51, /**< SPI3 */ - NVIC_UART4 = 52, /**< UART4 */ - NVIC_UART5 = 53, /**< UART5 */ - NVIC_TIMER6 = 54, /**< Timer 6 */ - NVIC_TIMER7 = 55, /**< Timer 7 */ - NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ - NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ - NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ - NVIC_DMA2_CH_4_5 = 59, /**< DMA2 channels 4 and 5 */ -#endif -} nvic_irq_num; - /* - * Initialises the interrupt controller and sets all interrupts to the - * lowest priority. + * Note: The family header must define enum nvic_irq_num, which gives + * descriptive names to the interrupts and exceptions from NMI (-14) + * to the largest interrupt available in the family, where the value + * for nonnegative enumerators corresponds to its position in the + * vector table. * - * For stand-alone products, the base address is normally the start of - * flash (0x08000000). - * - * @param vector_table_address base address of the vector table + * It also must define a static inline nvic_irq_disable_all(), which + * writes 0xFFFFFFFF to all ICE registers available in the family. */ -void nvic_init(uint32 vector_table_address, uint32 offset); +#include <family/nvic.h> -/** - * Sets the base address of the vector table. - */ +void nvic_init(uint32 address, uint32 offset); void nvic_set_vector_table(uint32 address, uint32 offset); - void nvic_irq_set_priority(nvic_irq_num irqn, uint8 priority); void nvic_sys_reset(); @@ -221,18 +132,7 @@ static inline void nvic_irq_disable(nvic_irq_num irq_num) { * Calling this function is significantly faster than calling * nvic_irq_disable() in a loop. */ -static inline void nvic_irq_disable_all(void) { - /* Note: This only works up to XL density. The fix for - * connectivity line is: - * - * NVIC_BASE->ICER[2] = 0xF; - * - * We don't support connectivity line devices (yet), so leave it - * alone for now. - */ - NVIC_BASE->ICER[0] = 0xFFFFFFFF; - NVIC_BASE->ICER[1] = 0xFFFFFFFF; -} +static inline void nvic_irq_disable_all(void); #ifdef __cplusplus } |