aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/include
diff options
context:
space:
mode:
Diffstat (limited to 'libmaple/include')
-rw-r--r--libmaple/include/libmaple/i2c.h52
-rw-r--r--libmaple/include/libmaple/i2c_common.h14
2 files changed, 66 insertions, 0 deletions
diff --git a/libmaple/include/libmaple/i2c.h b/libmaple/include/libmaple/i2c.h
index ff1c313..d4eac61 100644
--- a/libmaple/include/libmaple/i2c.h
+++ b/libmaple/include/libmaple/i2c.h
@@ -93,6 +93,7 @@ typedef struct i2c_msg {
#define I2C_MSG_READ 0x1
#define I2C_MSG_10BIT_ADDR 0x2
+
/**
* Bitwise OR of:
* - I2C_MSG_READ (write is default)
@@ -197,6 +198,10 @@ typedef struct i2c_msg {
#define I2C_DUTY_16_9 0x2 // 16/9 duty ratio
/* Flag 0x4 is reserved; DO NOT USE. */
#define I2C_BUS_RESET 0x8 // Perform a bus reset
+#define I2C_SLAVE_USE_RX_BUFFER 0x10 // Use a buffered message when doing a slave recv
+#define I2C_SLAVE_USE_TX_BUFFER 0x20 // Use a buffered message when doing a slave transmit
+#define I2C_SLAVE_DUAL_ADDRESS 0x40 // Enable the dual slave address scheme
+#define I2C_SLAVE_GENERAL_CALL 0x80 // Enable the dual slave address scheme
void i2c_master_enable(i2c_dev *dev, uint32 flags);
#define I2C_ERROR_PROTOCOL (-1)
@@ -406,6 +411,53 @@ static inline void i2c_set_trise(i2c_dev *dev, uint32 trise) {
dev->regs->TRISE = trise;
}
+/* Barry Carter
+ * Slave support
+ */
+
+/**
+ * @brief Enable Dual addressing mode to allow peripheral to have 2 addresses
+ * @param dev I2C device
+ */
+static inline void i2c_slave_dual_address_enable(i2c_dev *dev) {
+ dev->regs->OAR2 |= I2C_OAR2_ENDUAL;
+}
+
+/**
+ * @brief Enable General Call to allow the unit to respond on addr 0x00
+ * @param dev I2C device
+ */
+static inline void i2c_slave_general_call_enable(i2c_dev *dev) {
+ dev->regs->CR1 |= I2C_CR1_ENGC;
+}
+
+/* callback functions */
+/* Callback handler for data received over the bus */
+void i2c_slave_attach_recv_handler(i2c_dev *dev, i2c_msg *msg, i2c_slave_recv_callback_func func);
+
+/* Callback handler for data being requested over the bus
+ * The callback function must call i2c_write to get the data over the bus
+ */
+void i2c_slave_attach_transmit_handler(i2c_dev *dev, i2c_msg *msg, i2c_slave_transmit_callback_func func);
+
+/**
+ * @brief Set the primary I2c slave address
+ * @param dev I2C device
+ * @param address the 8 or 10 bit i2c address
+ */
+static inline void i2c_slave_set_own_address(i2c_dev *dev, uint16 address) {
+ dev->regs->OAR1 = address <<1;
+}
+
+/**
+ * @brief Set the secondary I2c slave address
+ * @param dev I2C device
+ * @param address the 8 or 10 bit i2c address
+ */
+static inline void i2c_slave_set_own_address2(i2c_dev *dev, uint16 address) {
+dev->regs->OAR2 = (address <<1 ) | I2C_OAR2_ENDUAL;
+}
+
#ifdef __cplusplus
}
#endif
diff --git a/libmaple/include/libmaple/i2c_common.h b/libmaple/include/libmaple/i2c_common.h
index 17cabe3..5debcb8 100644
--- a/libmaple/include/libmaple/i2c_common.h
+++ b/libmaple/include/libmaple/i2c_common.h
@@ -52,9 +52,12 @@ typedef enum i2c_state {
I2C_STATE_IDLE = 1, /**< Idle */
I2C_STATE_XFER_DONE = 2, /**< Done with transfer */
I2C_STATE_BUSY = 3, /**< Busy */
+ I2C_STATE_SL_RX = 4, /**< Slave receiving */
I2C_STATE_ERROR = -1 /**< Error occurred */
} i2c_state;
+typedef void (*i2c_slave_recv_callback_func)(struct i2c_msg *);
+typedef void (*i2c_slave_transmit_callback_func)(struct i2c_msg *);
/**
* @brief I2C device type.
*/
@@ -88,6 +91,17 @@ typedef struct i2c_dev {
nvic_irq_num ev_nvic_line; /**< Event IRQ number */
nvic_irq_num er_nvic_line; /**< Error IRQ number */
volatile i2c_state state; /**< Device state */
+ uint32 config_flags; /**< Configuration flags */
+
+ /* Barry Carter
+ * Slave implementation. Callback functions in this struct allow
+ * for a separate callback function for each I2C unit available onboard
+ */
+ i2c_slave_transmit_callback_func i2c_slave_transmit_callback;
+ i2c_slave_recv_callback_func i2c_slave_recv_callback;
+
+ struct i2c_msg *i2c_slave_msg; /* the message that the i2c slave will use */
+
} i2c_dev;
#endif