diff options
Diffstat (limited to 'libmaple/i2c.h')
| -rw-r--r-- | libmaple/i2c.h | 126 |
1 files changed, 63 insertions, 63 deletions
diff --git a/libmaple/i2c.h b/libmaple/i2c.h index 394fd57..27e24b2 100644 --- a/libmaple/i2c.h +++ b/libmaple/i2c.h @@ -1,29 +1,32 @@ -/* ***************************************************************************** +/****************************************************************************** * The MIT License * * Copyright (c) 2010 Perry Hung. * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * ****************************************************************************/ + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ /** - * @brief libmaple i2c header + * @file i2c.h + * @brief Inter-Integrated Circuit (I2C) peripheral support */ #ifndef _I2C_H_ @@ -78,57 +81,57 @@ extern i2c_dev* const I2C2; #define I2C2_BASE (i2c_reg_map*)0x40005800 /* i2c enable options */ -#define I2C_FAST_MODE 0x1 // 400 khz -#define I2C_DUTY_16_9 0x2 // 16/9 duty ratio +#define I2C_FAST_MODE 0x1 // 400 khz +#define I2C_DUTY_16_9 0x2 // 16/9 duty ratio /* Control register 1 bits */ -#define I2C_CR1_SWRST BIT(15) // Software reset -#define I2C_CR1_ALERT BIT(13) // SMBus alert -#define I2C_CR1_PEC BIT(12) // Packet error checking -#define I2C_CR1_POS BIT(11) // Acknowledge/PEC position -#define I2C_CR1_ACK BIT(10) // Acknowledge enable -#define I2C_CR1_START BIT(8) // Start generation -#define I2C_CR1_STOP BIT(9) // Stop generation -#define I2C_CR1_PE BIT(0) // Peripheral Enable +#define I2C_CR1_SWRST BIT(15) // Software reset +#define I2C_CR1_ALERT BIT(13) // SMBus alert +#define I2C_CR1_PEC BIT(12) // Packet error checking +#define I2C_CR1_POS BIT(11) // Acknowledge/PEC position +#define I2C_CR1_ACK BIT(10) // Acknowledge enable +#define I2C_CR1_START BIT(8) // Start generation +#define I2C_CR1_STOP BIT(9) // Stop generation +#define I2C_CR1_PE BIT(0) // Peripheral Enable /* Control register 2 bits */ -#define I2C_CR2_LAST BIT(12) // DMA last transfer -#define I2C_CR2_DMAEN BIT(11) // DMA requests enable -#define I2C_CR2_ITBUFEN BIT(10) // Buffer interrupt enable -#define I2C_CR2_ITEVTEN BIT(9) // Event interupt enable -#define I2C_CR2_ITERREN BIT(8) // Error interupt enable -#define I2C_CR2_FREQ 0xFFF // Peripheral input frequency +#define I2C_CR2_LAST BIT(12) // DMA last transfer +#define I2C_CR2_DMAEN BIT(11) // DMA requests enable +#define I2C_CR2_ITBUFEN BIT(10) // Buffer interrupt enable +#define I2C_CR2_ITEVTEN BIT(9) // Event interupt enable +#define I2C_CR2_ITERREN BIT(8) // Error interupt enable +#define I2C_CR2_FREQ 0xFFF // Peripheral input frequency /* Clock control register bits */ -#define I2C_CCR_FS BIT(15) // Fast mode selection -#define I2C_CCR_DUTY BIT(14) // 16/9 duty ratio -#define I2C_CCR_CCR 0xFFF // Clock control bits - -/* Status register 1 bits */ -#define I2C_SR1_SB BIT(0) // Start bit -#define I2C_SR1_ADDR BIT(1) // Address sent/matched -#define I2C_SR1_BTF BIT(2) // Byte transfer finished -#define I2C_SR1_ADD10 BIT(3) // 10-bit header sent -#define I2C_SR1_STOPF BIT(4) // Stop detection -#define I2C_SR1_RXNE BIT(6) // Data register not empty -#define I2C_SR1_TXE BIT(7) // Data register empty -#define I2C_SR1_BERR BIT(8) // Bus error -#define I2C_SR1_ARLO BIT(9) // Arbitration lost -#define I2C_SR1_AF BIT(10) // Acknowledge failure -#define I2C_SR1_OVR BIT(11) // Overrun/underrun -#define I2C_SR1_PECERR BIT(12) // PEC Error in reception -#define I2C_SR1_TIMEOUT BIT(14) // Timeout or Tlow error -#define I2C_SR1_SMBALERT BIT(15) // SMBus alert +#define I2C_CCR_FS BIT(15) // Fast mode selection +#define I2C_CCR_DUTY BIT(14) // 16/9 duty ratio +#define I2C_CCR_CCR 0xFFF // Clock control bits + +/* Status register 1 bits */ +#define I2C_SR1_SB BIT(0) // Start bit +#define I2C_SR1_ADDR BIT(1) // Address sent/matched +#define I2C_SR1_BTF BIT(2) // Byte transfer finished +#define I2C_SR1_ADD10 BIT(3) // 10-bit header sent +#define I2C_SR1_STOPF BIT(4) // Stop detection +#define I2C_SR1_RXNE BIT(6) // Data register not empty +#define I2C_SR1_TXE BIT(7) // Data register empty +#define I2C_SR1_BERR BIT(8) // Bus error +#define I2C_SR1_ARLO BIT(9) // Arbitration lost +#define I2C_SR1_AF BIT(10) // Acknowledge failure +#define I2C_SR1_OVR BIT(11) // Overrun/underrun +#define I2C_SR1_PECERR BIT(12) // PEC Error in reception +#define I2C_SR1_TIMEOUT BIT(14) // Timeout or Tlow error +#define I2C_SR1_SMBALERT BIT(15) // SMBus alert /* Status register 2 bits */ -#define I2C_SR2_MSL BIT(0) // Master/slave -#define I2C_SR2_BUSY BIT(1) // Bus busy -#define I2C_SR2_TRA BIT(2) // Transmitter/receiver -#define I2C_SR2_GENCALL BIT(4) // General call address -#define I2C_SR2_SMBDEFAULT BIT(5) // SMBus device default address -#define I2C_SR2_SMBHOST BIT(6) // SMBus host header -#define I2C_SR2_DUALF BIT(7) // Dual flag -#define I2C_SR2_PEC 0xFF00 // Packet error checking register +#define I2C_SR2_MSL BIT(0) // Master/slave +#define I2C_SR2_BUSY BIT(1) // Bus busy +#define I2C_SR2_TRA BIT(2) // Transmitter/receiver +#define I2C_SR2_GENCALL BIT(4) // General call address +#define I2C_SR2_SMBDEFAULT BIT(5) // SMBus device default address +#define I2C_SR2_SMBHOST BIT(6) // SMBus host header +#define I2C_SR2_DUALF BIT(7) // Dual flag +#define I2C_SR2_PEC 0xFF00 // Packet error checking register #ifdef __cplusplus extern "C" { @@ -166,7 +169,6 @@ static inline void i2c_write(i2c_dev *dev, uint8 byte) { dev->regs->DR = byte; } - /** * @brief Set input clock frequency, in mhz * @param dev i2c @@ -179,7 +181,6 @@ static inline void i2c_set_input_clk(i2c_dev *dev, uint32 freq) { dev->regs->CR2 = freq; } - /** * @brief Set i2c clock control register. See RM008 * @param dev i2c device @@ -257,4 +258,3 @@ static inline void i2c_disable_ack(i2c_dev *dev) { #endif #endif - |