diff options
Diffstat (limited to 'libmaple/i2c.c')
| -rw-r--r-- | libmaple/i2c.c | 37 |
1 files changed, 4 insertions, 33 deletions
diff --git a/libmaple/i2c.c b/libmaple/i2c.c index d2447a4..0e6a64c 100644 --- a/libmaple/i2c.c +++ b/libmaple/i2c.c @@ -33,6 +33,8 @@ * Currently, only master mode is supported. */ +#include "i2c_private.h" + #include <libmaple/libmaple.h> #include <libmaple/rcc.h> #include <libmaple/gpio.h> @@ -172,10 +174,6 @@ void i2c_init(i2c_dev *dev) { * SDA/PB9. */ void i2c_master_enable(i2c_dev *dev, uint32 flags) { -#define I2C_CLK (STM32_PCLK1/1000000) - uint32 ccr = 0; - uint32 trise = 0; - /* PE must be disabled to configure the device */ ASSERT(!(dev->regs->CR1 & I2C_CR1_PE)); @@ -191,35 +189,8 @@ void i2c_master_enable(i2c_dev *dev, uint32 flags) { i2c_init(dev); i2c_config_gpios(dev); - /* I2C1 and I2C2 are fed from APB1, clocked at 36MHz */ - i2c_set_input_clk(dev, I2C_CLK); - - if (flags & I2C_FAST_MODE) { - ccr |= I2C_CCR_FS; - - if (flags & I2C_DUTY_16_9) { - /* Tlow/Thigh = 16/9 */ - ccr |= I2C_CCR_DUTY; - ccr |= STM32_PCLK1/(400000 * 25); - } else { - /* Tlow/Thigh = 2 */ - ccr |= STM32_PCLK1/(400000 * 3); - } - - trise = (300 * (I2C_CLK)/1000) + 1; - } else { - /* Tlow/Thigh = 1 */ - ccr = STM32_PCLK1/(100000 * 2); - trise = I2C_CLK + 1; - } - - /* Set minimum required value if CCR < 1*/ - if ((ccr & I2C_CCR_CCR) == 0) { - ccr |= 0x1; - } - - i2c_set_clk_control(dev, ccr); - i2c_set_trise(dev, trise); + /* Configure clock and rise time */ + _i2c_set_ccr_trise(dev, flags); /* Enable event and buffer interrupts */ nvic_irq_enable(dev->ev_nvic_line); |