diff options
Diffstat (limited to 'libmaple/exti.h')
| -rw-r--r-- | libmaple/exti.h | 158 |
1 files changed, 32 insertions, 126 deletions
diff --git a/libmaple/exti.h b/libmaple/exti.h index 806578f..e145033 100644 --- a/libmaple/exti.h +++ b/libmaple/exti.h @@ -22,145 +22,51 @@ * THE SOFTWARE. *****************************************************************************/ - /** - * @file exti.h - * - * @brief External interrupt control prototypes and defines + * @file exti.h + * @brief External interrupt control prototypes and defines */ -#ifndef _EXTI_H_ -#define _EXTI_H_ - -/* Notes: - * - * To generate the interrupt, the interrupt line should be configured - * and enabled. This is done by programming the two trigger registers - * with the desired edge detection and by enabling the interrupt - * request by writing a '1' to the corresponding bit in the interrupt - * mask register. When the selected edge occurs on the external - * interrupt line, an interrupt request is generated. The pending bit - * corresponding to the interrupt line is also set. This request is - * reset by writing a '1' in the pending register. - * - * Hardware interrupt selection: - * - * To configure the 20 lines as interrupt sources, use the following - * procedure: - * - * 1) Configure AFIO_EXTIICR[y] to select the source input for EXTIx - * external interrupt - * 2) Configure the mask bits of the 20 interrupt lines (EXTI_IMR) - * 3) Configure the trigger selection bits of the interrupt lines - * (EXTI_RTSR and EXTI_FTSR) - * 4) Configure the enable and mask bits that control the NVIC_IRQ - * channel mapped to the External - * - * Interrupt Controller (EXTI) so that an inerrupt coming from one of - * the 20 lines can be correctly acknowledged. - * - * AFIO clock must be on. - * - * RM0008, page 107: "PD0, PD1 cannot be used for external - * interrupt/event generation on 36, 48, 64-bin packages." - * - * ---------------------------------------------------------------------------- - * Pin to EXTI Line Mappings: - * EXTI0 EXTI1 EXTI2 EXTI3 EXTI4 - * -------------------------------------------------------------------------- - * D2/PA0 D3/PA1 D1/PA2 D0/A6/PA3 D10/A10/PA4 - * D26/EXT7/PB0 D27/EXT8/PB1 D16/A2/PC2 D17/A3/PC3 D18/A4/PC4 - * D14/A0/PC0 D15/PC1 D25/EXT5/PD2 - * - * EXTI5 EXTI6 EXTI7 EXTI8 EXTI9 - * ---------------------------------------------------------------------------- - * D13/A13/PA5 D12/A12/PA6 D11/A11/PA7 D6/PA8 D7/PA9 - * D4/PB5 D5/PB6 D9/PB7 D38/PB8 D23/EXT4/PB9 - * D19/A5/PC5 D34/EXTI15/PC6 D35/EXT16/PC7 D36/PC8 D37/EXT18/PC9 - * - * EXTI10 EXTI11 EXTI12 EXTI13 EXTI14 - * ---------------------------------------------------------------------------- - * D8/PA10 D29/EXT10/PB11 D30/EXTI1/PB12 D31/EXTI12/PB13 D32/EXT13/PB14 - * D28/PB10 D20/EXTI1/PC13 D21/EXT2/PC14 - * D25/PC10 - * - * EXTI15 - * ---------------------------------------------------------------------------- - * D33/EXTI14/PB15 - * D22/EXT3/PC15 - * - * - * The 16 EXTI interrupts are mapped to 7 interrupt handlers. - * - * EXTI Lines to Interrupt Mapping: - * EXTI0 -> EXTI0 - * EXTI1 -> EXTI1 - * EXTI2 -> EXTI2 - * EXTI3 -> EXTI3 - * EXTI4 -> EXTI4 - * EXTI[5-9] -> EXT9_5 - * EXTI[10-15] -> EXT15_10 - * - * */ - -#define NR_EXTI_MODES 3 -#define NR_EXTI_CHANNELS 16 -#define NR_EXTI_PORTS NR_GPIO_PORTS // board specific +/* See notes/exti.txt for more info */ -#define EXTI_RISING 0 -#define EXTI_FALLING 1 -#define EXTI_RISING_FALLING 2 +#include "libmaple.h" +#include "gpio.h" -#define EXTI_IMR 0x40010400 // Interrupt mask register -#define EXTI_EMR (EXTI_IMR + 0x04) // Event mask register -#define EXTI_RTSR (EXTI_IMR + 0x08) // Rising trigger selection register -#define EXTI_FTSR (EXTI_IMR + 0x0C) // Falling trigger selection register -#define EXTI_SWIER (EXTI_IMR + 0x10) // Software interrupt event register -#define EXTI_PR (EXTI_IMR + 0x14) // Pending register - -#define AFIO_EVCR 0x40010000 -#define AFIO_EXTICR1 (AFIO_EVCR + 0x08) -#define AFIO_EXTICR2 (AFIO_EVCR + 0x0C) -#define AFIO_EXTICR3 (AFIO_EVCR + 0x10) -#define AFIO_EXTICR4 (AFIO_EVCR + 0x14) - -#define EXTI0 0 -#define EXTI1 1 -#define EXTI2 2 -#define EXTI3 3 -#define EXTI4 4 -#define EXTI5 5 -#define EXTI6 6 -#define EXTI7 7 -#define EXTI8 8 -#define EXTI9 9 -#define EXTI10 10 -#define EXTI11 11 -#define EXTI12 12 -#define EXTI13 13 -#define EXTI14 14 -#define EXTI15 15 - -#define EXTI_CONFIG_PORTA 0 // Maple, Maple Native, Maple Mini -#define EXTI_CONFIG_PORTB 1 // Maple, Maple Native, Maple Mini -#define EXTI_CONFIG_PORTC 2 // Maple, Maple Native, Maple Mini -#define EXTI_CONFIG_PORTD 3 // Maple and Maple Native only -#define EXTI_CONFIG_PORTE 4 // Native only -#define EXTI_CONFIG_PORTF 5 // Native only -#define EXTI_CONFIG_PORTG 6 // Native only +#ifndef _EXTI_H_ +#define _EXTI_H_ #ifdef __cplusplus extern "C"{ #endif -void exti_attach_interrupt(uint32 port, uint32 pin, voidFuncPtr handler, - uint32 mode); -void exti_detach_interrupt(uint32 channel); +/** EXTI register map type */ +typedef struct exti_reg_map { + __io uint32 IMR; /**< Interrupt mask register */ + __io uint32 EMR; /**< Event mask register */ + __io uint32 RTSR; /**< Rising trigger selection register */ + __io uint32 FTSR; /**< Falling trigger selection register */ + __io uint32 SWIER; /**< Software interrupt event register */ + __io uint32 PR; /**< Pending register */ +} exti_reg_map; + +/** EXTI register map base pointer */ +#define EXTI_BASE ((exti_reg_map*)0x40010400) + +/** External interrupt trigger mode */ +typedef enum exti_trigger_mode { + EXTI_RISING, /**< Trigger on the rising edge */ + EXTI_FALLING, /**< Trigger on the falling edge */ + EXTI_RISING_FALLING /**< Trigger on both the rising and falling edges */ +} exti_trigger_mode; + +void exti_attach_interrupt(afio_exti_num num, + afio_exti_port port, + voidFuncPtr handler, + exti_trigger_mode mode); +void exti_detach_interrupt(afio_exti_num num); #ifdef __cplusplus } // extern "C" #endif - #endif - |