1 files changed, 313 insertions, 86 deletions

diff --git a/libmaple/dma.c b/libmaple/dma.c
index 15c96e1..04cdcea 100644
--- a/libmaple/dma.c
+++ b/libmaple/dma.c
@@ -23,126 +23,353 @@
  *****************************************************************************/
 
 /**
- *  @file dma.c
- *
- *  @brief Direct Memory Access peripheral support
+ * @file dma.c
+ * @author Marti Bolivar <mbolivar@leaflabs.com>;
+ *         Original implementation by Michael Hope
+ * @brief Direct Memory Access peripheral support
  */
 
-#include "libmaple.h"
 #include "dma.h"
-#include "rcc.h"
-#include "nvic.h"
-
-#define DMA_EN    BIT(0)
-
-typedef struct dma_regs {
-    uint32 CCR;
-    uint32 CNDTR;
-    uint32 CPAR;
-    uint32 CMAR;
-} dma_regs;
-
-typedef struct DMAChannel {
-    void (*handler)(void);
-    uint32 irq_line;
-} DMAChannel;
-
-volatile static DMAChannel dma_channels[] = {
-    { .handler = NULL, .irq_line = NVIC_DMA_CH1 },
-    { .handler = NULL, .irq_line = NVIC_DMA_CH2 },
-    { .handler = NULL, .irq_line = NVIC_DMA_CH3 },
-    { .handler = NULL, .irq_line = NVIC_DMA_CH4 },
-    { .handler = NULL, .irq_line = NVIC_DMA_CH5 },
-    { .handler = NULL, .irq_line = NVIC_DMA_CH6 },
-    { .handler = NULL, .irq_line = NVIC_DMA_CH7 }
+#include "bitband.h"
+#include "util.h"
+
+/*
+ * Devices
+ */
+
+static dma_dev dma1 = {
+    .regs     = DMA1_BASE,
+    .clk_id   = RCC_DMA1,
+    .handlers = {{ .handler = NULL, .irq_line = NVIC_DMA_CH1 },
+                 { .handler = NULL, .irq_line = NVIC_DMA_CH2 },
+                 { .handler = NULL, .irq_line = NVIC_DMA_CH3 },
+                 { .handler = NULL, .irq_line = NVIC_DMA_CH4 },
+                 { .handler = NULL, .irq_line = NVIC_DMA_CH5 },
+                 { .handler = NULL, .irq_line = NVIC_DMA_CH6 },
+                 { .handler = NULL, .irq_line = NVIC_DMA_CH7 }}
+};
+dma_dev *DMA1 = &dma1;
+
+#ifdef STM32_HIGH_DENSITY
+static dma_dev dma2 = {
+    .regs     = DMA2_BASE,
+    .clk_id   = RCC_DMA2,
+    .handlers = {{ .handler = NULL, .irq_line = NVIC_DMA2_CH1   },
+                 { .handler = NULL, .irq_line = NVIC_DMA2_CH2   },
+                 { .handler = NULL, .irq_line = NVIC_DMA2_CH3   },
+                 { .handler = NULL, .irq_line = NVIC_DMA2_CH_4_5 },
+                 { .handler = NULL, .irq_line = NVIC_DMA2_CH_4_5 }} /* !@#$ */
 };
+dma_dev *DMA2 = &dma2;
+#endif
 
-/** Get the base address of the given channel, asserting and returning
- * NULL on illegal
+/*
+ * Convenience routines
  */
-static dma_regs *dma_get_regs(uint8 channel) {
-    if (channel >= 1 && channel <= 7) {
-        return (dma_regs *)(DMA1_CCR1 + DMA_CHANNEL_STRIDE * (channel-1));
-    } else {
-        ASSERT(0);
-        return NULL;
-    }
+
+/**
+ * @brief Initialize a DMA device.
+ * @param dev Device to initialize.
+ */
+void dma_init(dma_dev *dev) {
+    rcc_clk_enable(dev->clk_id);
 }
 
-/* Zero-based indexing */
-static inline void dispatch_handler(uint8 channel_idx) {
-    ASSERT(dma_channels[channel_idx].handler);
-    if (dma_channels[channel_idx].handler) {
-        (dma_channels[channel_idx].handler)();
-    }
+/**
+ * @brief Set up a DMA transfer.
+ *
+ * The channel will be disabled before being reconfigured.  The
+ * transfer will have low priority by default.  You may choose another
+ * priority before the transfer begins using dma_set_priority(), as
+ * well as performing any other configuration you desire.  When the
+ * channel is configured to your liking, enable it using dma_enable().
+ *
+ * @param dev DMA device.
+ * @param channel DMA channel.
+ * @param peripheral_address Base address of peripheral data register
+ *                           involved in the transfer.
+ * @param peripheral_size Peripheral data transfer size.
+ * @param memory_address Base memory address involved in the transfer.
+ * @param memory_size Memory data transfer size.
+ * @param mode Logical OR of dma_mode_flags
+ * @sideeffect Disables the given DMA channel.
+ * @see dma_xfer_size
+ * @see dma_mode_flags
+ * @see dma_set_num_transfers()
+ * @see dma_set_priority()
+ * @see dma_attach_interrupt()
+ * @see dma_enable()
+ */
+void dma_setup_transfer(dma_dev       *dev,
+                        dma_channel    channel,
+                        __io void     *peripheral_address,
+                        dma_xfer_size  peripheral_size,
+                        __io void     *memory_address,
+                        dma_xfer_size  memory_size,
+                        uint32         mode) {
+    dma_channel_reg_map *channel_regs = dma_channel_regs(dev, channel);
+
+    dma_disable(dev, channel);  /* can't write to CMAR/CPAR otherwise */
+    channel_regs->CCR = (memory_size << 10) | (peripheral_size << 8) | mode;
+    channel_regs->CMAR = (uint32)memory_address;
+    channel_regs->CPAR = (uint32)peripheral_address;
 }
 
-void DMAChannel1_IRQHandler(void) {
-    dispatch_handler(0);
+/**
+ * @brief Set the number of data to be transferred on a DMA channel.
+ *
+ * You may not call this function while the channel is enabled.
+ *
+ * @param dev DMA device
+ * @param channel Channel through which the transfer occurs.
+ * @param num_transfers
+ */
+void dma_set_num_transfers(dma_dev *dev,
+                           dma_channel channel,
+                           uint16 num_transfers) {
+    dma_channel_reg_map *channel_regs;
+
+    ASSERT_FAULT(!dma_is_channel_enabled(dev, channel));
+
+    channel_regs = dma_channel_regs(dev, channel);
+    channel_regs->CNDTR = num_transfers;
+}
+
+/**
+ * @brief Set the priority of a DMA transfer.
+ *
+ * You may not call this function while the channel is enabled.
+ *
+ * @param dev DMA device
+ * @param channel DMA channel
+ * @param priority priority to set.
+ */
+void dma_set_priority(dma_dev *dev,
+                      dma_channel channel,
+                      dma_priority priority) {
+    dma_channel_reg_map *channel_regs;
+    uint32 ccr;
+
+    ASSERT_FAULT(!dma_is_channel_enabled(dev, channel));
+
+    channel_regs = dma_channel_regs(dev, channel);
+    ccr = channel_regs->CCR;
+    ccr &= ~DMA_CCR_PL;
+    ccr |= priority;
+    channel_regs->CCR = ccr;
 }
 
-void DMAChannel2_IRQHandler(void) {
-    dispatch_handler(1);
+/**
+ * @brief Attach an interrupt to a DMA transfer.
+ *
+ * Interrupts are enabled using appropriate mode flags in
+ * dma_setup_transfer().
+ *
+ * @param dev DMA device
+ * @param channel Channel to attach handler to
+ * @param handler Interrupt handler to call when channel interrupt fires.
+ * @see dma_setup_transfer()
+ * @see dma_get_irq_cause()
+ * @see dma_detach_interrupt()
+ */
+void dma_attach_interrupt(dma_dev *dev,
+                          dma_channel channel,
+                          void (*handler)(void)) {
+    dev->handlers[channel - 1].handler = handler;
+    nvic_irq_enable(dev->handlers[channel - 1].irq_line);
 }
 
-void DMAChannel3_IRQHandler(void) {
-    dispatch_handler(2);
+/**
+ * @brief Detach a DMA transfer interrupt handler.
+ *
+ * After calling this function, the given channel's interrupts will be
+ * disabled.
+ *
+ * @param dev DMA device
+ * @param channel Channel whose handler to detach
+ * @sideeffect Clears interrupt enable bits in the channel's CCR register.
+ * @see dma_attach_interrupt()
+ */
+void dma_detach_interrupt(dma_dev *dev, dma_channel channel) {
+    /* Don't use nvic_irq_disable()! Think about DMA2 channels 4 and 5. */
+    dma_channel_regs(dev, channel)->CCR &= ~0xF;
+    dev->handlers[channel - 1].handler = NULL;
 }
 
-void DMAChannel4_IRQHandler(void) {
-    dispatch_handler(3);
+/**
+ * @brief Discover the reason why a DMA interrupt was called.
+ *
+ * You may only call this function within an attached interrupt
+ * handler for the given channel.
+ *
+ * This function resets the internal DMA register state which encodes
+ * the cause of the interrupt; consequently, it can only be called
+ * once per interrupt handler invocation.
+ *
+ * @brief dev DMA device
+ * @brief channel Channel whose interrupt is being handled.
+ * @return Reason why the interrupt fired.
+ * @sideeffect Clears channel status flags in dev->regs->ISR.
+ * @see dma_attach_interrupt()
+ * @see dma_irq_cause
+ */
+dma_irq_cause dma_get_irq_cause(dma_dev *dev, dma_channel channel) {
+    uint8 status_bits = dma_get_isr_bits(dev, channel);
+
+    /* If the channel global interrupt flag is cleared, then
+     * something's very wrong. */
+    ASSERT(status_bits & BIT(0));
+
+    dma_clear_isr_bits(dev, channel);
+
+    /* ISR flags get set even if the corresponding interrupt enable
+     * bits in the channel's configuration register are cleared, so we
+     * can't use a switch here.
+     *
+     * Don't change the order of these if statements. */
+    if (status_bits & BIT(3)) {
+        return DMA_TRANSFER_ERROR;
+    } else if (status_bits & BIT(1)) {
+        return DMA_TRANSFER_COMPLETE;
+    } else if (status_bits & BIT(2)) {
+        return DMA_TRANSFER_HALF_COMPLETE;
+    } else if (status_bits & BIT(0)) {
+        /* Shouldn't happen (unless someone messed up an IFCR write). */
+        throb();
+    }
+#if DEBUG_LEVEL < DEBUG_ALL
+    else {
+        /* We shouldn't have been called, but the debug level is too
+         * low for the above ASSERT() to have had any effect.  In
+         * order to fail fast, mimic the DMA controller's behavior
+         * when an error occurs. */
+        dma_disable(dev, channel);
+        return DMA_TRANSFER_ERROR;
+    }
+#endif
 }
 
-void DMAChannel5_IRQHandler(void) {
-    dispatch_handler(4);
+/**
+ * @brief Enable a DMA channel.
+ * @param dev DMA device
+ * @param channel Channel to enable
+ */
+void dma_enable(dma_dev *dev, dma_channel channel) {
+    dma_channel_reg_map *chan_regs = dma_channel_regs(dev, channel);
+    bb_peri_set_bit(&chan_regs->CCR, DMA_CCR_EN_BIT, 1);
 }
 
-void DMAChannel6_IRQHandler(void) {
-    dispatch_handler(5);
+/**
+ * @brief Disable a DMA channel.
+ * @param dev DMA device
+ * @param channel Channel to disable
+ */
+void dma_disable(dma_dev *dev, dma_channel channel) {
+    dma_channel_reg_map *chan_regs = dma_channel_regs(dev, channel);
+    bb_peri_set_bit(&chan_regs->CCR, DMA_CCR_EN_BIT, 0);
 }
 
-void DMAChannel7_IRQHandler(void) {
-    dispatch_handler(6);
+/**
+ * @brief Set the base memory address where data will be read from or
+ *        written to.
+ *
+ * You must not call this function while the channel is enabled.
+ *
+ * If the DMA memory size is 16 bits, the address is automatically
+ * aligned to a half-word.  If the DMA memory size is 32 bits, the
+ * address is aligned to a word.
+ *
+ * @param dev DMA Device
+ * @param channel Channel whose base memory address to set.
+ * @param addr Memory base address to use.
+ */
+void dma_set_mem_addr(dma_dev *dev, dma_channel channel, __io void *addr) {
+    dma_channel_reg_map *chan_regs;
+
+    ASSERT_FAULT(!dma_is_channel_enabled(dev, channel));
+
+    chan_regs = dma_channel_regs(dev, channel);
+    chan_regs->CMAR = (uint32)addr;
 }
 
-void dma_init(uint8 channel, volatile void *paddr,
-              dma_transfer_size psize, dma_transfer_size msize,
-              int mode) {
-    volatile dma_regs *regs = dma_get_regs(channel);
+/**
+ * @brief Set the base peripheral address where data will be read from
+ *        or written to.
+ *
+ * You must not call this function while the channel is enabled.
+ *
+ * If the DMA peripheral size is 16 bits, the address is automatically
+ * aligned to a half-word.  If the DMA peripheral size is 32 bits, the
+ * address is aligned to a word.
+ *
+ * @param dev DMA Device
+ * @param channel Channel whose peripheral data register base address to set.
+ * @param addr Peripheral memory base address to use.
+ */
+void dma_set_per_addr(dma_dev *dev, dma_channel channel, __io void *addr) {
+    dma_channel_reg_map *chan_regs;
 
-    if (regs != NULL) {
-        rcc_clk_enable(RCC_DMA1);
+    ASSERT_FAULT(!dma_is_channel_enabled(dev, channel));
 
-        regs->CCR = ((0 << 12)        /* Low priority */
-                     | (msize << 10)
-                     | (psize <<  8)
-                     | (0 << 0)       /* Disabled (until started) */
-                     | mode);
+    chan_regs = dma_channel_regs(dev, channel);
+    chan_regs->CPAR = (uint32)addr;
+}
+
+/*
+ * IRQ handlers
+ */
 
-        regs->CPAR = (uint32)paddr;
+static inline void dispatch_handler(dma_dev *dev, dma_channel channel) {
+    void (*handler)(void) = dev->handlers[channel - 1].handler;
+    if (handler) {
+        handler();
+        dma_clear_isr_bits(dev, channel); /* in case handler doesn't */
     }
 }
 
-void dma_start(uint8 channel, volatile void *buffer, uint16 count) {
-    volatile dma_regs *regs = dma_get_regs(channel);
+void __irq_dma_channel1(void) {
+    dispatch_handler(DMA1, DMA_CH1);
+}
 
-    if (regs != NULL) {
-        regs->CCR &= ~DMA_EN; /* CMAR may not be written with EN set */
-        regs->CMAR = (uint32)buffer;
-        regs->CNDTR = count;
+void __irq_dma_channel2(void) {
+    dispatch_handler(DMA1, DMA_CH2);
+}
 
-        regs->CCR |= DMA_EN;
-    }
+void __irq_dma_channel3(void) {
+    dispatch_handler(DMA1, DMA_CH3);
+}
+
+void __irq_dma_channel4(void) {
+    dispatch_handler(DMA1, DMA_CH4);
+}
+
+void __irq_dma_channel5(void) {
+    dispatch_handler(DMA1, DMA_CH5);
+}
+
+void __irq_dma_channel6(void) {
+    dispatch_handler(DMA1, DMA_CH6);
+}
+
+void __irq_dma_channel7(void) {
+    dispatch_handler(DMA1, DMA_CH7);
+}
+
+#ifdef STM32_HIGH_DENSITY
+void __irq_dma2_channel1(void) {
+    dispatch_handler(DMA2, DMA_CH1);
+}
+
+void __irq_dma2_channel2(void) {
+    dispatch_handler(DMA2, DMA_CH2);
 }
 
-void dma_attach_interrupt(uint8 channel, voidFuncPtr handler) {
-    channel--;                  /* 1-based -> 0-based indexing */
-    dma_channels[channel].handler = handler;
-    nvic_irq_enable(dma_channels[channel].irq_line);
+void __irq_dma2_channel3(void) {
+    dispatch_handler(DMA2, DMA_CH3);
 }
 
-void dma_detach_interrupt(uint8 channel) {
-    channel--;
-    nvic_irq_disable(dma_channels[channel].irq_line);
-    dma_channels[channel].handler = NULL;
+void __irq_dma2_channel4_5(void) {
+    dispatch_handler(DMA2, DMA_CH4);
+    dispatch_handler(DMA2, DMA_CH5);
 }
+#endif