aboutsummaryrefslogtreecommitdiffstats
path: root/examples
diff options
context:
space:
mode:
Diffstat (limited to 'examples')
-rw-r--r--examples/test-timers.cpp143
-rw-r--r--examples/vga-leaf.cpp138
-rw-r--r--examples/vga-scope.cpp28
3 files changed, 50 insertions, 259 deletions
diff --git a/examples/test-timers.cpp b/examples/test-timers.cpp
index c3e3cb9..374b903 100644
--- a/examples/test-timers.cpp
+++ b/examples/test-timers.cpp
@@ -2,7 +2,6 @@
// and turns on PWM on pin 2
#include "wirish.h"
-#include "timers.h"
#define LED_PIN 13
#define PWM_PIN 2
@@ -12,12 +11,8 @@ void handler2(void);
void handler3(void);
void handler4(void);
-void setup_test_timer(void);
-
int toggle = 0;
-int timer = 1;
-int state = 3;
-int last_but = 0;
+int t;
int count1 = 0;
int count2 = 0;
@@ -25,13 +20,15 @@ int count3 = 0;
int count4 = 0;
uint16 rate1 = 1000;
uint16 rate2 = 2000;
-uint16 rate3 = 3000;
-uint16 rate4 = 4000;
+uint16 rate3 = 4000;
+uint16 rate4 = 8000;
uint16 val1 = 10000;
uint16 val2 = 10000;
uint16 val3 = 10000;
uint16 val4 = 10000;
+HardwareTimer Timers[] = {Timer1, Timer2, Timer3, Timer4};
+
void setup()
{
/* Set up the LED to blink */
@@ -42,123 +39,59 @@ void setup()
/* Send a message out USART2 */
//SerialUSB.begin(9600);
SerialUSB.println("Begining timer test...");
-
- /* Send a message out the usb virtual serial port */
- //SerialUSB.println("Hello!");
-
- timer = 1;
- setup_test_timer();
-
+ for(int t=0; t<4; t++) {
+ Timers[t].setChannel1Mode(TIMER_OUTPUTCOMPARE);
+ Timers[t].setChannel2Mode(TIMER_OUTPUTCOMPARE);
+ Timers[t].setChannel3Mode(TIMER_OUTPUTCOMPARE);
+ Timers[t].setChannel4Mode(TIMER_OUTPUTCOMPARE);
+ }
}
-
void loop() {
- toggle ^= 1;
- digitalWrite(LED_PIN, toggle);
- delay(800);
-
-
- if(digitalRead(38) && !last_but) {
- state++;
- switch(state){
- case 1:
- SerialUSB.println("Testing Timer1 ---------------------------");
- timer = 1;
- setup_test_timer();
- break;
- case 2:
- SerialUSB.println("Testing Timer2 ---------------------------");
- timer_set_mode(timer,1,TIMER_DISABLED);
- timer_set_mode(timer,2,TIMER_DISABLED);
- timer_set_mode(timer,3,TIMER_DISABLED);
- timer_set_mode(timer,4,TIMER_DISABLED);
- timer_set_count(1,0);
- timer_set_count(2,0);
- timer_set_count(3,0);
- timer_set_count(4,0);
- timer = 2;
- setup_test_timer();
- break;
- case 3:
- SerialUSB.println("Testing Timer3 ---------------------------");
- timer_set_mode(timer,1,TIMER_DISABLED);
- timer_set_mode(timer,2,TIMER_DISABLED);
- timer_set_mode(timer,3,TIMER_DISABLED);
- timer_set_mode(timer,4,TIMER_DISABLED);
- timer = 3;
- setup_test_timer();
- break;
- case 4:
- SerialUSB.println("Testing Timer4 ---------------------------");
- timer_set_mode(timer,1,TIMER_DISABLED);
- timer_set_mode(timer,2,TIMER_DISABLED);
- timer_set_mode(timer,3,TIMER_DISABLED);
- timer_set_mode(timer,4,TIMER_DISABLED);
- timer = 4;
- setup_test_timer();
- break;
- default:
- state = 0;
- timer_set_mode(timer,1,TIMER_DISABLED);
- timer_set_mode(timer,2,TIMER_DISABLED);
- timer_set_mode(timer,3,TIMER_DISABLED);
- timer_set_mode(timer,4,TIMER_DISABLED);
- timer = 0;
- SerialUSB.println("Restarting -------------------------------");
- }
+ for(t=0; t<4; t++) {
+ toggle ^= 1; digitalWrite(LED_PIN, toggle);
+ delay(1000);
+ SerialUSB.println("-----------------------------------------------------");
+ SerialUSB.print("Testing Timer "); SerialUSB.println(t+1);
+ count1 = count2 = count3 = count4 = 0;
+ Timers[t].setChannel1Mode(TIMER_OUTPUTCOMPARE);
+ Timers[t].setChannel2Mode(TIMER_OUTPUTCOMPARE);
+ Timers[t].setChannel3Mode(TIMER_OUTPUTCOMPARE);
+ Timers[t].setChannel4Mode(TIMER_OUTPUTCOMPARE);
+ Timers[t].attachCompare1Interrupt(handler1);
+ Timers[t].attachCompare2Interrupt(handler2);
+ Timers[t].attachCompare3Interrupt(handler3);
+ Timers[t].attachCompare4Interrupt(handler4);
+ delay(5000);
+ Timers[t].setChannel1Mode(TIMER_DISABLED);
+ Timers[t].setChannel2Mode(TIMER_DISABLED);
+ Timers[t].setChannel3Mode(TIMER_DISABLED);
+ Timers[t].setChannel4Mode(TIMER_DISABLED);
+ SerialUSB.print("Count1: "); SerialUSB.println(count1);
+ SerialUSB.print("Count2: "); SerialUSB.println(count2);
+ SerialUSB.print("Count3: "); SerialUSB.println(count3);
+ SerialUSB.print("Count4: "); SerialUSB.println(count4);
}
-
- SerialUSB.print("Doing ------------------ "); SerialUSB.println(timer,DEC);
- if(timer!=0) { SerialUSB.print("CNT: "); SerialUSB.println(timer_get_count(timer),DEC); }
- SerialUSB.print("Count1 : "); SerialUSB.println(count1,DEC);
- SerialUSB.print("Count2 : "); SerialUSB.println(count2,DEC);
- SerialUSB.print("Count3 : "); SerialUSB.println(count3,DEC);
- SerialUSB.print("Count4 : "); SerialUSB.println(count4,DEC);
- SerialUSB.println();
- /*
- SerialUSB.print("Status : "); SerialUSB.println(get_sr(),HEX);
- */
- last_but = digitalRead(38);
-}
-
-void setup_test_timer(void) {
- timer_set_prescaler(timer,10000);
- timer_set_mode(timer,1,TIMER_OUTPUTCOMPARE);
- timer_set_mode(timer,2,TIMER_OUTPUTCOMPARE);
- timer_set_mode(timer,3,TIMER_OUTPUTCOMPARE);
- timer_set_mode(timer,4,TIMER_OUTPUTCOMPARE);
- val1 = val2 = val3 = val4 = 10000;
- timer_set_compare_value(timer,1,val1);
- timer_set_compare_value(timer,2,val2);
- timer_set_compare_value(timer,3,val3);
- timer_set_compare_value(timer,4,val4);
- timer_attach_interrupt(timer,1,handler1);
- timer_attach_interrupt(timer,2,handler2);
- timer_attach_interrupt(timer,3,handler3);
- timer_attach_interrupt(timer,4,handler4);
- count1 = count2 = count3 = count4 = 0;
}
void handler1(void) {
val1 += rate1;
- timer_set_compare_value(timer,1,val1);
+ Timers[t].setCompare1(val1);
count1++;
- //SerialUSB.print("CC3 Inter: "); SerialUSB.print(get_sr(),HEX);
- // SerialUSB.print(", "); SerialUSB.println(get_sr_buff(),HEX);
}
void handler2(void) {
val2 += rate2;
- timer_set_compare_value(timer,2,val2);
+ Timers[t].setCompare2(val2);
count2++;
}
void handler3(void) {
val3 += rate3;
- timer_set_compare_value(timer,3,val3);
+ Timers[t].setCompare3(val3);
count3++;
}
void handler4(void) {
val4 += rate4;
- timer_set_compare_value(timer,4,val4);
+ Timers[t].setCompare4(val4);
count4++;
}
diff --git a/examples/vga-leaf.cpp b/examples/vga-leaf.cpp
index c2e61ae..3374608 100644
--- a/examples/vga-leaf.cpp
+++ b/examples/vga-leaf.cpp
@@ -1,39 +1,11 @@
-
#include "wirish.h"
-/*
-D5 PB6 - TIM4_CH1 I2C1_SCL - - Y
-D6 PA8 - TIM1_CH1 - USART1_CK - Y
-D7 PA9 - TIM1_CH2 - USART1_TX - Y
-D8 PA10 - TIM1_CH3 - USART1_RX - Y
-D9 PB7 - TIM4_CH2 I2C1_SDA - - Y
-*/
-
-//gpio_write_bit(GPIOB_BASE, 6, 1); // VGA_R
-//gpio_write_bit(GPIOB_BASE, 6, 0);
-
-//(GPIOA_BASE)->BSRR = BIT(8);
-//asm volatile("nop");
-//(GPIOA_BASE)->BRR = BIT(8);
-/*
- gpio_write_bit(GPIOB_BASE, 6, 1); // VGA_R
- gpio_write_bit(GPIOB_BASE, 6, 0);
- gpio_write_bit(GPIOA_BASE, 8, 1); // VGA_G
- gpio_write_bit(GPIOA_BASE, 8, 0);
- gpio_write_bit(GPIOA_BASE, 9, 1); // VGA_B
- gpio_write_bit(GPIOA_BASE, 9, 0);
- gpio_write_bit(GPIOA_BASE, 10, 1); // VGA_V
- gpio_write_bit(GPIOA_BASE, 10, 0);
- gpio_write_bit(GPIOB_BASE, 7, 1); // VGA_H
- gpio_write_bit(GPIOB_BASE, 7, 0);
-*/
-
#define LED_PIN 13
-#define VGA_R 5 // B6
-#define VGA_G 6 // A8
-#define VGA_B 7 // A9
-#define VGA_V 11 // A6
-#define VGA_H 12 // A7
+#define VGA_R 5 // B6
+#define VGA_G 6 // A8
+#define VGA_B 7 // A9
+#define VGA_V 11 // A6
+#define VGA_H 12 // A7
#define VGA_R_HIGH (GPIOB_BASE)->BSRR = BIT(6)
#define VGA_R_LOW (GPIOB_BASE)->BRR = BIT(6)
#define VGA_G_HIGH (GPIOA_BASE)->BSRR = BIT(8)
@@ -89,11 +61,14 @@ void setup()
timer_set_count(4,0);
}
+void loop() {
+ // everything happens in the interrupts!
+}
+
int toggle = 0;
-uint16 x = 0;
+uint16 x = 0;
uint16 y = 0;
uint8 v_active = 1;
-GPIO_Port *portb = GPIOB_BASE;
void isr_porch(void) {
VGA_H_HIGH;
@@ -139,9 +114,9 @@ uint8 logo[18][16] = {
void isr_start(void) {
if(!v_active) { return; }
+ VGA_R_LOW;
VGA_R_HIGH;
- //delayMicroseconds(2);
- //gpio_write_bit(GPIOA_BASE, 8, 1); // VGA_G
+
for(x=0; x<32; x++) {
if(logo[y/28][x/2]) {
VGA_G_HIGH;
@@ -151,7 +126,6 @@ void isr_start(void) {
VGA_B_LOW;
}
}
-
}
void isr_stop(void) {
if(!v_active) { return; }
@@ -163,94 +137,6 @@ void isr_update(void) {
VGA_H_LOW;
}
-void loop() {
- /*
- toggle ^= 1;
- digitalWrite(LED_PIN, toggle);
- delay(100);
- Serial2.println("HIHIHI!");
- */
- //for(y=0; y<480; y++) {
- /*
- for(y=0; y<160; y++) {
- VGA_R_LOW;
- VGA_H_LOW;
- delayMicroseconds(3);
- VGA_H_HIGH;
- VGA_R_HIGH;
- delayMicroseconds(8);
- VGA_G_HIGH;
- delayMicroseconds(10);
- VGA_B_HIGH;
- delayMicroseconds(10);
- VGA_R_LOW;
- VGA_B_LOW;
- VGA_G_LOW;
- //VGA_G_HIGH;
- }
- for(y=0; y<160; y++) {
- VGA_R_LOW;
- VGA_H_LOW;
- delayMicroseconds(3);
- VGA_H_HIGH;
- VGA_G_HIGH;
- delayMicroseconds(8);
- VGA_R_HIGH;
- delayMicroseconds(10);
- VGA_B_HIGH;
- delayMicroseconds(10);
- VGA_R_LOW;
- VGA_B_LOW;
- VGA_G_LOW;
- //VGA_G_HIGH;
- }
- for(y=0; y<160; y++) {
- VGA_R_LOW;
- VGA_H_LOW;
- delayMicroseconds(3);
- VGA_H_HIGH;
- VGA_B_HIGH;
- delayMicroseconds(8);
- VGA_G_HIGH;
- delayMicroseconds(10);
- VGA_R_HIGH;
- delayMicroseconds(10);
- VGA_R_LOW;
- VGA_B_LOW;
- VGA_G_LOW;
- //VGA_G_HIGH;
- }
- for(y=0; y<11; y++) {
- VGA_R_LOW;
- VGA_H_LOW;
- delayMicroseconds(3);
- VGA_R_LOW;
- VGA_H_HIGH;
- delayMicroseconds(28);
- }
- VGA_V_LOW;
- for(y=0; y<2; y++) {
- VGA_R_LOW;
- VGA_H_LOW;
- delayMicroseconds(3);
- VGA_R_LOW;
- VGA_H_HIGH;
- delayMicroseconds(28);
- }
- VGA_V_HIGH;
- for(y=0; y<30; y++) {
- VGA_R_LOW;
- VGA_H_LOW;
- delayMicroseconds(3);
- VGA_R_LOW;
- VGA_H_HIGH;
- delayMicroseconds(28);
- }
- */
-
-}
-
-
int main(void) {
init();
setup();
diff --git a/examples/vga-scope.cpp b/examples/vga-scope.cpp
index 1f597a4..3e7e75e 100644
--- a/examples/vga-scope.cpp
+++ b/examples/vga-scope.cpp
@@ -1,33 +1,6 @@
#include "wirish.h"
-/*
-D5 PB6 - TIM4_CH1 I2C1_SCL - - Y
-D6 PA8 - TIM1_CH1 - USART1_CK - Y
-D7 PA9 - TIM1_CH2 - USART1_TX - Y
-D8 PA10 - TIM1_CH3 - USART1_RX - Y
-D9 PB7 - TIM4_CH2 I2C1_SDA - - Y
-*/
-
-//gpio_write_bit(GPIOB_BASE, 6, 1); // VGA_R
-//gpio_write_bit(GPIOB_BASE, 6, 0);
-
-//(GPIOA_BASE)->BSRR = BIT(8);
-//asm volatile("nop");
-//(GPIOA_BASE)->BRR = BIT(8);
-/*
- gpio_write_bit(GPIOB_BASE, 6, 1); // VGA_R
- gpio_write_bit(GPIOB_BASE, 6, 0);
- gpio_write_bit(GPIOA_BASE, 8, 1); // VGA_G
- gpio_write_bit(GPIOA_BASE, 8, 0);
- gpio_write_bit(GPIOA_BASE, 9, 1); // VGA_B
- gpio_write_bit(GPIOA_BASE, 9, 0);
- gpio_write_bit(GPIOA_BASE, 10, 1); // VGA_V
- gpio_write_bit(GPIOA_BASE, 10, 0);
- gpio_write_bit(GPIOB_BASE, 7, 1); // VGA_H
- gpio_write_bit(GPIOB_BASE, 7, 0);
-*/
-
#define LED_PIN 13
#define ANALOG_PIN 18
#define VGA_R 5 // B6
@@ -152,7 +125,6 @@ void isr_update(void) {
void loop() {
//val = analogRead(ANALOG_PIN);
-
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 03:51:30 +0000