diff options
Diffstat (limited to 'examples/test-fsmc.cpp')
| -rw-r--r-- | examples/test-fsmc.cpp | 214 |
1 files changed, 110 insertions, 104 deletions
diff --git a/examples/test-fsmc.cpp b/examples/test-fsmc.cpp index f4fd068..7db3bb7 100644 --- a/examples/test-fsmc.cpp +++ b/examples/test-fsmc.cpp @@ -1,119 +1,125 @@ +#include <stddef.h> // for ptrdiff_t
#include "wirish.h"
#include "fsmc.h"
-#define LED_PIN 23 // hack for maple native
-#define DISC_PIN 14 // hack for USB on native
-
-// System control block registers
-#define SCB_BASE (SCB_Reg*)(0xE000ED00)
-
-// This stuff should ultimately get moved to util.h or scb.h or w/e.
-// Also in interactive test program and the HardFault IRQ handler.
-typedef struct {
- volatile uint32 CPUID;
- volatile uint32 ICSR;
- volatile uint32 VTOR;
- volatile uint32 AIRCR;
- volatile uint32 SCR;
- volatile uint32 CCR;
- volatile uint32 SHPR1;
- volatile uint32 SHPR2;
- volatile uint32 SHPR3;
- volatile uint32 SHCRS;
- volatile uint32 CFSR;
- volatile uint32 HFSR;
- uint32 pad1;
- volatile uint32 MMAR;
- volatile uint32 BFAR;
-} SCB_Reg;
-
-SCB_Reg *scb;
-
-uint16 *ptr;
-int toggle = 0;
-int count = 0;
+#ifndef BOARD_maple_native
+#error "Sorry, this example only works on Maple Native."
+#endif
+
+// Start of FSMC SRAM bank 1
+static uint16 *const sram_start = (uint16*)0x60000000;
+// End of Maple Native SRAM chip address space (512K 16-bit words)
+static uint16 *const sram_end = (uint16*)0x60080000;
+
+void test_single_write(void);
+void test_all_addresses(void);
void setup() {
- uint32 id;
- scb = (SCB_Reg*)SCB_BASE;
-
- pinMode(LED_PIN, OUTPUT);
- pinMode(DISC_PIN, OUTPUT);
- digitalWrite(DISC_PIN,1);
- digitalWrite(LED_PIN,1);
-
- Serial1.begin(9600);
- Serial1.println("Hello World!");
-
- Serial1.print("Init... ");
- fsmc_native_sram_init();
- Serial1.println("Done.");
-
- // Start of channel1 SRAM bank (through to 0x63FFFFFF, though only a chunk
- // of this is valid)
- ptr = (uint16*)(0x60000000);
-
- Serial1.print("Writing... ");
- *ptr = 0x1234;
- Serial1.println("Done.");
-
- Serial1.print("Reading... ");
- id = *ptr;
- Serial1.print("Done: "); // shouldn't be 0xFFFFFFFF
- Serial1.println(id,BIN);
-
- Serial1.println("Dumping System Control Block Registers");
- Serial1.print("CPUID: ");
- id = scb->CPUID;
- Serial1.println(id,BIN);
- Serial1.print("ICSR: ");
- id = scb->ICSR;
- Serial1.println(id,BIN);
- Serial1.print("CFSR: ");
- id = scb->CFSR;
- Serial1.println(id,BIN);
- Serial1.print("HFSR: ");
- id = scb->HFSR;
- Serial1.println(id,BIN);
- Serial1.print("MMAR: ");
- id = scb->MMAR;
- Serial1.println(id,BIN);
- Serial1.print("BFAR: ");
- id = scb->BFAR;
- Serial1.println(id,BIN);
-
- Serial1.println("Now testing all memory addresses... (will hardfault at the end)");
- delay(3000);
+ pinMode(BOARD_LED_PIN, OUTPUT);
+ digitalWrite(BOARD_LED_PIN, HIGH);
+
+ Serial1.begin(115200);
+ Serial1.println("*** Beginning RAM chip test");
+
+ test_single_write();
+ test_all_addresses();
+
+ Serial1.println("Tests pass, finished.");
}
void loop() {
- digitalWrite(LED_PIN, toggle);
- toggle ^= 1;
- delay(1);
-
- for(int i = 0; i<100; i++) { // modify this to speed things up
- count++;
- ptr++;
- //delay(10); // tweak this to test SRAM resiliance over time
- *ptr = (0x0000FFFF & count);
- if(*ptr != (0x0000FFFF & count)) {
- Serial1.println("ERROR: mismatch, halting");
- while(1) { }
+}
+
+void test_single_write() {
+ uint16 *ptr = sram_start;
+ uint16 tmp;
+
+ Serial1.print("Writing 0x1234... ");
+ *ptr = 0x1234;
+ Serial1.println("Done.");
+
+ Serial1.print("Reading... ");
+ tmp = *ptr;
+ Serial1.print("Done: 0x");
+ Serial1.println(tmp, HEX);
+
+ if (tmp != 0x1234) {
+ Serial1.println("Mismatch; abort.");
+ ASSERT(0);
+ }
+}
+
+void test_all_addresses() {
+ uint32 start, end;
+ uint16 count = 0;
+ uint16 *ptr;
+
+ Serial1.println("Now writing all memory addresses (unrolled loop)");
+ // Turn off the USB interrupt, as it interferes most with timing
+ // (don't turn off SysTick, or we won't get micros()).
+ SerialUSB.end();
+ start = micros();
+ for (ptr = sram_start; ptr < sram_end;) {
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ *ptr++ = count++;
+ }
+ end = micros();
+ SerialUSB.begin();
+ Serial1.print("Done. Elapsed time (us): ");
+ Serial1.println(end - start);
+
+ Serial1.println("Validating writes.");
+ for (ptr = sram_start, count = 0; ptr < sram_end; ptr++, count++) {
+ uint16 value = *ptr;
+ if (value != count) {
+ Serial1.print("mismatch: 0x");
+ Serial1.print((uint32)ptr);
+ Serial1.print(" = 0x");
+ Serial1.print(value, HEX);
+ Serial1.print(", should be 0x");
+ Serial1.print(count, HEX);
+ Serial1.println(".");
+ ASSERT(0);
}
- }
-
- Serial1.print((uint32)(ptr),HEX);
- Serial1.print(": ");
- Serial1.println(*ptr,BIN);
+ }
+ Serial1.println("Done; all writes seem valid.");
+
+ ptrdiff_t nwrites = sram_end - sram_start;
+ double us_per_write = double(end-start) / double(nwrites);
+ Serial1.print("Number of writes = ");
+ Serial1.print(nwrites);
+ Serial1.print("; avg. time per write = ");
+ Serial1.print(us_per_write);
+ Serial1.print(" us (");
+ Serial1.print(1 / us_per_write);
+ Serial1.println(" MHz)");
+}
+
+__attribute__((constructor)) void premain() {
+ init();
}
int main(void) {
- init();
- setup();
+ setup();
+
+ while (true) {
+ loop();
+ }
- while (1) {
- loop();
- }
- return 0;
+ return 0;
}
|