aboutsummaryrefslogtreecommitdiffstats
path: root/docs/source
diff options
context:
space:
mode:
Diffstat (limited to 'docs/source')
-rw-r--r--docs/source/hardware/maple.rst87
-rw-r--r--docs/source/i2c.rst2
-rw-r--r--docs/source/index.rst1
-rw-r--r--docs/source/libmaple/api/systick.rst5
-rw-r--r--docs/source/systick.rst13
-rw-r--r--docs/source/timers.rst27
6 files changed, 77 insertions, 58 deletions
diff --git a/docs/source/hardware/maple.rst b/docs/source/hardware/maple.rst
index e460e00..c2dc895 100644
--- a/docs/source/hardware/maple.rst
+++ b/docs/source/hardware/maple.rst
@@ -136,49 +136,54 @@ the header is connected to on the microcontroller. The "5V?" column
documents whether or not the pin is 5 volt tolerant.
.. csv-table::
- :header: "Pin", "STM32", ":ref:`ADC <adc>`", ":ref:`Timer <timers>`", ":ref:`I2C <i2c>`", ":ref:`UART <usart>`", ":ref:`SPI <spi>`", "5v?"
-
- "D0", "PA3", "ADC3", "TIM2_CH4", "-", "USART2_RX", "-", "No"
- "D1", "PA2", "ADC2", "TIM2_CH3", "-", "USART2_TX", "-", "No"
- "D2", "PA0", "ADC0", "TIM2_CH1_ETR", "-", "USART2_CTS", "-", "No"
- "D3", "PA1", "ADC1", "TIM2_CH2", "-", "USART2_RTS", "-", "No"
- "D4", "PB5", "-", "-", "ISC1_SMBA", "-", "-", "No"
- "D5", "PB6", "-", "TIM4_CH1", "I2C1_SCL", "-", "-", "Yes"
- "D6", "PA8", "-", "TIM1_CH1", "-", "USART1_CK", "-", "Yes"
- "D7", "PA9", "-", "TIM1_CH2", "-", "USART1_TX", "-", "Yes"
- "D8", "PA10", "-", "TIM1_CH3", "-", "USART1_RX", "-", "Yes"
- "D9", "PB7", "-", "TIM4_CH2", "I2C1_SDA", "-", "-", "Yes"
- "D10", "PA4", "ADC4", "-", "-", "USART2_CK", "SPI1_NSS", "No"
- "D11", "PA7", "ADC7", "TIM3_CH2", "-", "-", "SPI1_MOSI", "No"
- "D12", "PA6", "ADC6", "TIM3_CH1", "-", "-", "SPI1_MISO", "No"
- "D13", "PA5", "ADC5", "-", "-", "-", "SPI1_SCK", "No"
- "D14", "PB8", "-", "TIM4_CH3", "-", "-", "-", "Yes"
- "D15", "PC0", "ADC10", "-", "-", "-", "-", "No"
- "D16", "PC1", "ADC11", "-", "-", "-", "-", "No"
- "D17", "PC2", "ADC12", "-", "-", "-", "-", "No"
- "D18", "PC3", "ADC13", "-", "-", "-", "-", "No"
- "D19", "PC4", "ADC14", "-", "-", "-", "-", "No"
- "D20", "PC5", "ADC15", "-", "-", "-", "-", "No"
- "D21", "PC13", "-", "-", "-", "-", "-", "No"
- "D22", "PC14", "-", "-", "-", "-", "-", "No"
- "D23", "PC15", "-", "-", "-", "-", "-", "No"
- "D24", "PB9", "-", "TIM4_CH4", "-", "-", "-", "Yes"
- "D25", "PD2", "-", "TIM3_ETR", "-", "-", "-", "Yes"
- "D26", "PC10", "-", "-", "-", "-", "-", "Yes"
- "D27", "PB0", "ADC8", "TIM3_CH3", "-", "-", "-", "No"
- "D28", "PB1", "ADC9", "TIM3_CH4", "-", "-", "-", "No"
- "D29", "PB10", "-", "-", "I2C2_SCL", "USART3_TX", "-", "Yes"
- "D30", "PB11", "-", "-", "I2C2_SDA", "USART3_RX", "-", "Yes"
- "D31", "PB12", "-", "TIM1_BKIN", "I2C2_SMBA", "USART3_CK", "SPI2_NSS", "Yes"
- "D32", "PB13", "-", "TIM1_CH1N", "-", "USART3_CTS", "SPI2_SCK", "Yes"
- "D33", "PB14", "-", "TIM1_CH2N", "-", "USART3_RTS", "SPI2_MISO", "Yes"
- "D34", "PB15", "-", "TIM1_CH3N", "-", "-", "SPI2_MOSI", "Yes"
- "D35", "PC6", "-", "-", "-", "-", "-", "Yes"
- "D36", "PC7", "-", "-", "-", "-", "-", "Yes"
- "D37", "PC8", "-", "-", "-", "-", "-", "Yes"
+ :header: Pin, STM32, :ref:`ADC <adc>`, :ref:`Timer <timers>`, :ref:`I2C <i2c>`, :ref:`UART <usart>`, :ref:`SPI <spi>`, 5v?
+
+ D0, PA3, ADC3, TIM2_CH4, -, USART2_RX, -, No
+ D1, PA2, ADC2, TIM2_CH3, -, USART2_TX, -, No
+ D2, PA0, ADC0, TIM2_CH1_ETR, -, USART2_CTS, -, No
+ D3, PA1, ADC1, TIM2_CH2, -, USART2_RTS, -, No
+ D4, PB5, -, -, ISC1_SMBA, -, -, No
+ D5, PB6, -, TIM4_CH1, I2C1_SCL, -, -, Yes
+ D6, PA8, -, TIM1_CH1, -, USART1_CK, -, Yes
+ D7, PA9, -, TIM1_CH2, -, USART1_TX, -, Yes
+ D8, PA10, -, TIM1_CH3, -, USART1_RX, -, Yes
+ D9, PB7, -, TIM4_CH2, I2C1_SDA, -, -, Yes
+ D10, PA4, ADC4, -, -, USART2_CK, SPI1_NSS, No
+ D11, PA7, ADC7, TIM3_CH2, -, -, SPI1_MOSI, No
+ D12, PA6, ADC6, TIM3_CH1, -, -, SPI1_MISO, No
+ D13, PA5, ADC5, -, -, -, SPI1_SCK, No
+ D14, PB8, -, TIM4_CH3, -, -, -, Yes
+ D15, PC0, ADC10, -, -, -, -, No
+ D16, PC1, ADC11, -, -, -, -, No
+ D17, PC2, ADC12, -, -, -, -, No
+ D18, PC3, ADC13, -, -, -, -, No
+ D19, PC4, ADC14, -, -, -, -, No
+ D20, PC5, ADC15, -, -, -, -, No
+ D21, PC13, -, -, -, -, -, No
+ D22, PC14, -, -, -, -, -, No
+ D23, PC15, -, -, -, -, -, No
+ D24, PB9, -, TIM4_CH4, -, -, -, Yes
+ D25, PD2, -, TIM3_ETR, -, -, -, Yes
+ D26, PC10, -, -, -, -, -, Yes
+ D27, PB0, ADC8, TIM3_CH3, -, -, -, No
+ D28, PB1, ADC9, TIM3_CH4, -, -, -, No
+ D29, PB10, -, -, I2C2_SCL, USART3_TX, -, Yes
+ D30, PB11, -, -, I2C2_SDA, USART3_RX, -, Yes
+ D31, PB12, -, TIM1_BKIN, I2C2_SMBA, USART3_CK, SPI2_NSS, Yes
+ D32, PB13, -, TIM1_CH1N, -, USART3_CTS, SPI2_SCK, Yes
+ D33, PB14, -, TIM1_CH2N, -, USART3_RTS, SPI2_MISO, Yes
+ D34, PB15, -, TIM1_CH3N, -, -, SPI2_MOSI, Yes
+ D35, PC6, -, -, -, -, -, Yes
+ D36, PC7, -, -, -, -, -, Yes
+ D37, PC8, -, -, -, -, -, Yes
.. TODO [0.0.10] JTAG pins
+.. The following pins are used for :ref:`jtag` debugging by default, but
+.. can be used as ordinary GPIOs through the use of the
+.. :ref:`lang-disabledebugports` function. (Though see :ref:`this
+.. erratum <maple-reset-njtrst>`).
+
Timer Pin Map
^^^^^^^^^^^^^
@@ -353,6 +358,8 @@ Rev 5
from its silkscreen. This mistake was fixed in later manufacturing
runs.
+.. _maple-reset-njtrst:
+
* **Reset and NJTRST tied together**: The MCU's reset pin is connected
to PB4, the NJTRST pin, which is pin 43. Thus, attempting to use
pin 43 as a GPIO will reset your board (and also prevents the JTAG
diff --git a/docs/source/i2c.rst b/docs/source/i2c.rst
index e3d68c0..31976ac 100644
--- a/docs/source/i2c.rst
+++ b/docs/source/i2c.rst
@@ -25,7 +25,7 @@ interrupt handlers) at the same time.
Hardware/Circuit Design
-----------------------
-.. FIXME [0.0.10 add links to board-specific values]
+.. FIXME [0.1.0] Link to board-specific values (BOARD_I2C1_SDA_PIN, etc.)
Maple boards have two |i2c| ports. Maples reliably communicate with
up to a 400kHz clock speed; this doesn't translate into a 400kbps data
diff --git a/docs/source/index.rst b/docs/source/index.rst
index f6b7f92..ce3985f 100644
--- a/docs/source/index.rst
+++ b/docs/source/index.rst
@@ -54,6 +54,7 @@ Have fun!
pwm
spi
timers
+ systick
usb
usart
diff --git a/docs/source/libmaple/api/systick.rst b/docs/source/libmaple/api/systick.rst
index a02b8e4..a8c0971 100644
--- a/docs/source/libmaple/api/systick.rst
+++ b/docs/source/libmaple/api/systick.rst
@@ -1,14 +1,13 @@
.. highlight:: c
-
-.. _libmaple-systick:
-
.. FIXME [0.0.10] move these to the right places:
.. _libmaple-systick_disable:
.. _libmaple-systick_resume:
+.. _libmaple-systick:
+
``systick.h``
=============
diff --git a/docs/source/systick.rst b/docs/source/systick.rst
new file mode 100644
index 0000000..6f20133
--- /dev/null
+++ b/docs/source/systick.rst
@@ -0,0 +1,13 @@
+SysTick
+=======
+
+.. TODO Recommended reading and more content.
+
+The SysTick peripheral provides a timer which :ref:`libmaple` uses to
+keep track of the board's uptime.
+
+Library Documentation
+---------------------
+
+See :ref:`libmaple-systick` for more information on library support
+for interfacing with the SysTick peripheral.
diff --git a/docs/source/timers.rst b/docs/source/timers.rst
index 9163e69..403193f 100644
--- a/docs/source/timers.rst
+++ b/docs/source/timers.rst
@@ -5,8 +5,6 @@
Timers
======
-.. FIXME [0.0.10] links to systick.h in a few places on this page
-
There are four general purpose timers in the Maple microcontroller
that can be configured to generate periodic or delayed events with
minimal work done by the microcontroller. For example, the :ref:`PWM
@@ -55,10 +53,11 @@ events to be programmed at 4 different rates on a single timer. Note
that function call overheads mean that the smallest increment rate is
at least a few microseconds.
-Function Reference
-------------------
+Library Documentation
+---------------------
-* :ref:`HardwareTimer <lang-hardwaretimer>`
+See the :ref:`HardwareTimer <lang-hardwaretimer>` reference for more
+information on controlling the built-in timers.
Caveats
-------
@@ -109,12 +108,12 @@ you put your Maple into :ref:`perpetual bootloader mode
to it (or somehow causing your program to re-enable serial over USB
using :ref:`SerialUSB.begin() <lang-serialusb-begin>`).
-The SysTick peripheral another way to perform periodic or delayed
-events. Its separate timer does not conflict with any other
-peripherals, but the associated 1 kHz interrupt can jitter the general
-purpose timer interrupts. The SysTick peripheral can be disabled by
-calling :ref:`systick_disable() <libmaple-systick_disable>`, and
-re-enabled using :ref:`systick_resume() <libmaple-systick_resume>`.
-However, be aware that calling ``systick_disable()`` will stop the
-values coming from :ref:`lang-micros` and :ref:`lang-millis` from
-increasing.
+The :ref:`SysTick <systick>` peripheral another way to perform
+periodic or delayed events. Its separate timer does not conflict with
+any other peripherals, but the associated 1 kHz interrupt can jitter
+the general purpose timer interrupts. The SysTick peripheral can be
+disabled by calling :ref:`systick_disable()
+<libmaple-systick_disable>`, and re-enabled using
+:ref:`systick_resume() <libmaple-systick_resume>`. However, be aware
+that calling ``systick_disable()`` will stop the values coming from
+:ref:`lang-micros` and :ref:`lang-millis` from increasing.