diff options
Diffstat (limited to 'docs/source/troubleshooting.rst')
| -rw-r--r-- | docs/source/troubleshooting.rst | 24 |
1 files changed, 11 insertions, 13 deletions
diff --git a/docs/source/troubleshooting.rst b/docs/source/troubleshooting.rst index 9d452d1..0c10d01 100644 --- a/docs/source/troubleshooting.rst +++ b/docs/source/troubleshooting.rst @@ -30,10 +30,8 @@ use :ref:`perpetual bootloader mode My board is bricked! I can't upload via the bootloader no matter what! ---------------------------------------------------------------------- -Use the hardcoded serial STM32 serial bootloader to re-flash the -bootloader. - -.. TODO insert docs on reflashing the bootloader +Use the hardcoded serial STM32 serial bootloader to :ref:`re-flash the +bootloader <bootloader-reflashing>`. If it really is bricked, and you think it's our fault, `contact us <http://leaflabs.com/contact>`_\ ! @@ -43,8 +41,8 @@ My 5v peripheral doesn't work! (I2C, SPI, USART, etc) Yup, the Maple is a 3.3v board. You may need to use a level converter. See the :ref:`compatibility <compatibility>`, :ref:`GPIO -<gpio>`, or other :ref:`hardware specific documentation <hardware>` -for more information. +<gpio>`, or other :ref:`hardware specific documentation +<index-hardware>` for more information. The reset and D38/serial buttons don't seem to work reliably! ------------------------------------------------------------- @@ -100,18 +98,18 @@ a board selected. The work-around is to restart the IDE. Mysterious! ``NullPointerException`` ------------------------ -A classic! Make sure you have selected a board from the pulldown menu. +A classic! Make sure you have selected a board from the pulldown menu. .. TODO: remove when Python version is released ``undefined reference to setup()/loop()`` ----------------------------------------- -Your sketch/program either does not include one of the `setup -<setup()>`_ or `loop <loop()>`_ functions, or it was not found by the -compiler. Your program must include both ``void setup()`` and ``void -loop()`` functions; they don't have to do anything, but they **must** -be there. +Your sketch/program either does not include one of the :ref:`setup() +<lang-setup>` or `loop() <lang-loop>` functions, or it was not found +by the compiler. Your program must include both ``void setup()`` and +``void loop()`` functions; they don't have to do anything, but they +**must** be there. You can start with an example program (to see one in the IDE, click on File > Examples > Stubs > BareMinimum) to get the basic structure. @@ -152,7 +150,7 @@ is several times more FLASH memory available for user programs. ``No DFU capable USB device found`` ----------------------------------- -This probably means you don't have a Maple plugged in or powered on! +This probably means you don't have a Maple plugged in or powered on! I have multiple Maples installed; how do I know which one will get flashed? --------------------------------------------------------------------------- |