aboutsummaryrefslogtreecommitdiffstats
path: root/docs/source/lang
diff options
context:
space:
mode:
Diffstat (limited to 'docs/source/lang')
-rw-r--r--docs/source/lang/api/abs.rst49
-rw-r--r--docs/source/lang/api/analogread.rst154
-rw-r--r--docs/source/lang/api/analogwrite.rst169
-rw-r--r--docs/source/lang/api/attachinterrupt.rst102
-rw-r--r--docs/source/lang/api/bit.rst44
-rw-r--r--docs/source/lang/api/bitclear.rst44
-rw-r--r--docs/source/lang/api/bitread.rst46
-rw-r--r--docs/source/lang/api/bitset.rst46
-rw-r--r--docs/source/lang/api/bitwrite.rst46
-rw-r--r--docs/source/lang/api/cc-attribution.txt9
-rw-r--r--docs/source/lang/api/constants.rst304
-rw-r--r--docs/source/lang/api/constrain.rst69
-rw-r--r--docs/source/lang/api/cos.rst32
-rw-r--r--docs/source/lang/api/delay.rst72
-rw-r--r--docs/source/lang/api/delaymicroseconds.rst65
-rw-r--r--docs/source/lang/api/detachinterrupt.rst37
-rw-r--r--docs/source/lang/api/digitalread.rst58
-rw-r--r--docs/source/lang/api/digitalwrite.rst68
-rw-r--r--docs/source/lang/api/highbyte.rst59
-rw-r--r--docs/source/lang/api/loop.rst45
-rw-r--r--docs/source/lang/api/lowbyte.rst25
-rw-r--r--docs/source/lang/api/map.rst68
-rw-r--r--docs/source/lang/api/max.rst65
-rw-r--r--docs/source/lang/api/micros.rst46
-rw-r--r--docs/source/lang/api/millis.rst52
-rw-r--r--docs/source/lang/api/min.rst66
-rw-r--r--docs/source/lang/api/pinmode.rst77
-rw-r--r--docs/source/lang/api/pow.rst23
-rw-r--r--docs/source/lang/api/pwmwrite.rst49
-rw-r--r--docs/source/lang/api/random.rst73
-rw-r--r--docs/source/lang/api/randomseed.rst60
-rw-r--r--docs/source/lang/api/serial.rst226
-rw-r--r--docs/source/lang/api/serialusb.rst242
-rw-r--r--docs/source/lang/api/setup.rst29
-rw-r--r--docs/source/lang/api/sin.rst32
-rw-r--r--docs/source/lang/api/sq.rst46
-rw-r--r--docs/source/lang/api/tan.rst31
-rw-r--r--docs/source/lang/api/volatile.rst65
-rw-r--r--docs/source/lang/cpp/arithmetic.rst127
-rw-r--r--docs/source/lang/cpp/array.rst123
-rw-r--r--docs/source/lang/cpp/assignment.rst70
-rw-r--r--docs/source/lang/cpp/bitshift.rst144
-rw-r--r--docs/source/lang/cpp/bitwisemath.rst186
-rw-r--r--docs/source/lang/cpp/boolean.rst91
-rw-r--r--docs/source/lang/cpp/booleanvariables.rst54
-rw-r--r--docs/source/lang/cpp/break.rst35
-rw-r--r--docs/source/lang/cpp/byte.rst34
-rw-r--r--docs/source/lang/cpp/bytecast.rst50
-rw-r--r--docs/source/lang/cpp/cc-attribution.txt9
-rw-r--r--docs/source/lang/cpp/char.rst50
-rw-r--r--docs/source/lang/cpp/charcast.rst36
-rw-r--r--docs/source/lang/cpp/comments.rst67
-rw-r--r--docs/source/lang/cpp/comparison.rst87
-rw-r--r--docs/source/lang/cpp/compoundarithmetic.rst44
-rw-r--r--docs/source/lang/cpp/compoundbitwise.rst231
-rw-r--r--docs/source/lang/cpp/const.rst52
-rw-r--r--docs/source/lang/cpp/continue.rst32
-rw-r--r--docs/source/lang/cpp/curly-braces.rst109
-rw-r--r--docs/source/lang/cpp/define.rst56
-rw-r--r--docs/source/lang/cpp/double.rst48
-rw-r--r--docs/source/lang/cpp/doublecast.rst27
-rw-r--r--docs/source/lang/cpp/dowhile.rst27
-rw-r--r--docs/source/lang/cpp/enum.rst53
-rw-r--r--docs/source/lang/cpp/float.rst50
-rw-r--r--docs/source/lang/cpp/floatcast.rst28
-rw-r--r--docs/source/lang/cpp/for.rst142
-rw-r--r--docs/source/lang/cpp/goto.rst130
-rw-r--r--docs/source/lang/cpp/if.rst121
-rw-r--r--docs/source/lang/cpp/include.rst72
-rw-r--r--docs/source/lang/cpp/increment.rst37
-rw-r--r--docs/source/lang/cpp/int.rst64
-rw-r--r--docs/source/lang/cpp/intcast.rst29
-rw-r--r--docs/source/lang/cpp/keywords.rst205
-rw-r--r--docs/source/lang/cpp/long.rst52
-rw-r--r--docs/source/lang/cpp/longcast.rst27
-rw-r--r--docs/source/lang/cpp/modulo.rst70
-rw-r--r--docs/source/lang/cpp/numeric-types.rst79
-rw-r--r--docs/source/lang/cpp/pointer.rst31
-rw-r--r--docs/source/lang/cpp/return.rst61
-rw-r--r--docs/source/lang/cpp/scope.rst120
-rw-r--r--docs/source/lang/cpp/semicolon.rst25
-rw-r--r--docs/source/lang/cpp/sizeof.rst64
-rw-r--r--docs/source/lang/cpp/sqrt.rst25
-rw-r--r--docs/source/lang/cpp/static.rst57
-rw-r--r--docs/source/lang/cpp/string.rst128
-rw-r--r--docs/source/lang/cpp/switchcase.rst118
-rw-r--r--docs/source/lang/cpp/unsignedchar.rst33
-rw-r--r--docs/source/lang/cpp/unsignedint.rst55
-rw-r--r--docs/source/lang/cpp/unsignedlong.rst41
-rw-r--r--docs/source/lang/cpp/variables.rst170
-rw-r--r--docs/source/lang/cpp/void.rst31
-rw-r--r--docs/source/lang/cpp/while.rst38
92 files changed, 6738 insertions, 0 deletions
diff --git a/docs/source/lang/api/abs.rst b/docs/source/lang/api/abs.rst
new file mode 100644
index 0000000..0cc6c23
--- /dev/null
+++ b/docs/source/lang/api/abs.rst
@@ -0,0 +1,49 @@
+.. highlight:: cpp
+
+.. _lang-abs:
+
+
+abs()
+======
+
+(Macro) computes the absolute value of a number.
+
+Syntax
+------
+
+::
+
+ abs(x)
+
+Parameters
+----------
+
+**x**: the number.
+
+Returns
+-------
+
+**x**: if **x** is greater than or equal to 0.
+
+**-x**: if **x** is less than 0.
+
+Warning
+-------
+
+Because of the way ``abs()`` is implemented, avoid using other
+functions or causing side effects inside the parentheses, as it may
+lead to incorrect results::
+
+ abs(a++); // avoid this - yields incorrect results
+
+ abs(a); // use this instead -
+ a++; // keep other operations outside abs()
+
+
+Arduino Compatibility
+---------------------
+
+Maple's implementation of ``abs()`` is compatible with Arduino.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/analogread.rst b/docs/source/lang/api/analogread.rst
new file mode 100644
index 0000000..c614aca
--- /dev/null
+++ b/docs/source/lang/api/analogread.rst
@@ -0,0 +1,154 @@
+.. highlight:: cpp
+
+.. _lang-analogread:
+
+.. _lang-api-analogread:
+
+analogRead()
+============
+
+Used to perform ADC conversion.
+
+.. contents:: Contents
+ :local:
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: analogRead
+
+Discussion
+----------
+
+Reads the value from the specified analog pin. The Maple board
+contains a 16-channel, 12-bit analog to digital converter. This means
+that it will map input voltages between 0 and 3.3 volts into integer
+values between 0 and 4095. This yields a resolution between readings
+of 3.3V / 4096 units, or 0.8 millivolts. However, a number of factors
+interfere with getting full accuracy and precision. For more
+information, see :ref:`adc`.
+
+Before calling analogRead() on a pin, that pin must first be
+configured for analog input, using :ref:`lang-pinMode` (you only
+have to do this once, so it's usually done in :ref:`lang-setup`\ ).
+
+It takes about 0.8 microseconds (.0000008 seconds) to read an analog
+input, so the maximum sample rate using this function is approximately
+1.3 million samples per second\ [#fsamp]_.
+
+
+Parameter Discussion
+--------------------
+
+The pin parameter is the number of the analog input pin to read from.
+Header pins on the Maple with ADC functionality (marked as "AIN" on
+the silkscreen) are:
+
+ 0, 1, 2, 3, 10, 11, 12, 13, 15, 16, 17, 18, 19, 20, 27, 28
+
+Note that pins 3, 27, and 28 are not marked AIN on the silkscreen
+for Maple revisions through Rev 5, however, they **do work** as
+analog input pins.
+
+Note
+----
+
+If the analog input pin is not connected to anything, the value
+returned by analogRead() will fluctuate based on a number of factors
+(e.g. the values of the other analog inputs, how close your hand is to
+the board, etc.) in a seemingly random way.
+
+
+Example
+-------
+
+ ::
+
+
+ int analogPin = 3; // potentiometer wiper (middle terminal) connected
+ // to analog pin 3. outside leads to ground and +3.3V
+ int val = 0; // variable to store the value read
+
+ void setup() {
+ pinMode(analogPin, INPUT_ANALOG); // set up pin for analog input
+ SerialUSB.begin(); // set up usb virtual COM port
+ }
+
+ void loop() {
+ val = analogRead(analogPin); // read the input pin
+ SerialUSB.println(val); // print the value, for debugging with
+ // a serial monitor
+ }
+
+
+Arduino Compatibility
+---------------------
+
+The Arduino board contains a 6 channel (8 channels on the Mini and
+Nano, 16 on the Mega), 10-bit analog to digital converter with an
+input voltage range of 0V--5V. This means that it will map input
+voltages between 0 and 5 volts (which is **larger** than Maple's range
+of 0V-3.3V) into integer values between 0 and 1023 (which is
+**smaller** than the Maple's range of 0--4095).
+
+This yields a theoretical resolution between readings of: 5 volts /
+1024 units or .0049 volts (4.9 mV) per unit on Arduino boards, which
+is larger, and thus less precise, than Maple's 0.0008 volts (0.8 mV).
+
+If your program expects Arduino-style 10-bit ADC, you can :ref:`right
+shift <lang-bitshift>` the value of a Maple readout by 2, like so::
+
+ // right shift means that the result will be between 0 and 1023;
+ // be aware that you're losing a lot of precision if you do this
+ int adc_reading = analogRead(pin) >> 2;
+
+On the Arduino, the input range and resolution can be changed using
+their implementation of `analogReference()
+<http://arduino.cc/en/Reference/AnalogReference>`_\ . Because of the
+way its hardware (as of Rev 5) was designed, it's not possible to
+implement analogReference on the Maple, so this function doesn't
+exist. If your inputs lie in a different voltage range than 0V--3.3V,
+you'll need to bring them into that range before using analogRead.
+Some basic tools to accomplish this are `resistor dividers
+<http://en.wikipedia.org/wiki/Voltage_divider>`_ and `Zener diodes
+<http://en.wikipedia.org/wiki/Voltage_source#Zener_voltage_source>`_\
+. However, opamps and other powered components can also be used if
+greater precision is required.
+
+Finally, On the Arduino, it takes significantly longer to read analog
+input: about 100 microseconds (0.0001 s), so the maximum reading rate
+is 10,000 times a second.
+
+
+See also
+--------
+
+- :ref:`ADC note <adc>`
+- `(Arduino) Tutorial: Analog Input Pins <http://arduino.cc/en/Tutorial/AnalogInputPins>`_
+
+
+.. rubric:: Footnotes
+
+.. [#fsamp] This is based on the current configuration of a 55.5 cycle
+ sample time, at 72 MHz. However, the minimum sample time *possible*
+ is 1.5 cycles, leading to a theoretical maximum of approximately 48
+ million samples per second (of course, doing anything with the
+ readings also consumes cycles, so this maximum can't be reached in
+ practice).
+
+ See the `STM32 Reference Manual <full-manual>`_, §§11.12.4--5
+ (pp. 225--226), for more information on the low-level bit twiddling
+ currently necessary to change the sample time. For examples of how
+ the ADCs are configured in libmaple, see `adc.h
+ <http://github.com/leaflabs/libmaple/blob/master/libmaple/adc.h>`_
+ and `adc.c
+ <http://github.com/leaflabs/libmaple/blob/master/libmaple/adc.c>`_\
+ . Be aware that changing the sample time has important
+ consequences related to the impedance of the device connected to
+ the input pin. If you want to make changes, as a minimum, you
+ should first read ST's application notes on `ADC modes
+ <stm32-adc-modes>`_ and `ADC oversampling
+ <stm32-adc-oversampling>`_.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/analogwrite.rst b/docs/source/lang/api/analogwrite.rst
new file mode 100644
index 0000000..01820ef
--- /dev/null
+++ b/docs/source/lang/api/analogwrite.rst
@@ -0,0 +1,169 @@
+.. highlight:: cpp
+
+.. _lang-analogwrite:
+
+.. _lang-api-analogwrite:
+
+
+analogWrite()
+=============
+
+.. note::
+
+ On the Maple, calling analogWrite() is the same as calling
+ :ref:`lang-pwmwrite`\ ; see that function's documentation for more
+ information.
+
+ This is because PWM is not true analog output (i.e., is not the
+ output of a `DAC
+ <http://en.wikipedia.org/wiki/Digital-to-analog_converter>`_\ ), so
+ the function is badly named. For instance, **analogWrite() has
+ absolutely nothing to do with** :ref:`lang-analogread`\ , which is
+ potentially confusing.
+
+ The alias of analogWrite() to pwmWrite() is provided (sigh) for the
+ sake of compatibility with Arduino, but we recommend using
+ :ref:`lang-pwmwrite` when writing new software, for clarity.
+
+.. contents:: Contents
+ :local:
+
+.. _lang-analogwrite-compatibility:
+
+Arduino Compatibility
+---------------------
+
+There are a few important differences between Arduino's `analogWrite()
+<http://arduino.cc/en/Reference/AnalogWrite>`_ and Maple's
+:ref:`lang-pwmwrite` that you should keep in mind. In each case, we
+have some recommendations you can use to help converting from Arduino
+to Maple.
+
+Difference 1: Duty cycle range is different
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The first and most important difference is that the largest possible
+value for the duty cycle is much bigger on the Maple. Using Arduino's
+analogWrite(), the duty cycle ranges between 0--255 (always off --
+always on)\ [#fbytemax]_\ . Using Maple's pwmWrite(), the duty cycle
+ranges from 0--65,535 by default\ [#fuint16max]_\ .
+
+This is a good thing! The greater range of values on the Maple gives
+you much more precise control over the duty cycle of your PWM output.
+
+If you're porting code from the Arduino and want a quick-and-dirty
+fix, one solution is to :ref:`map <lang-map>` the argument to
+analogWrite into the right range::
+
+ // Arduino code:
+ analogWrite(pin, duty);
+
+ // Becomes Maple code:
+ analogWrite(pin, map(duty, 0, 255, 0, 65535));
+
+This will convert values in the range 0-255 to values in the range
+0--65,635, which is the correct default range for all of the timers
+which control PWM output. See the :ref:`timers reference <timers>`
+for more information.
+
+Another fix is to consult the :ref:`pin mapping mega table
+<pin-mapping-mega-table>` to find the timer which controls PWM on the
+pin you're using, then set that Timer's overflow to 255. Subsequent
+calls to analogWrite() should work as on the Arduino (with the same
+loss of precision). Note, however, that that affects the overflow for
+the **entire timer**, so other code relying on that timer (such as any
+:ref:`interrupts <lang-attachinterrupt>` the timer controls) will
+likely need to be modified as well.
+
+Difference 2: You must use pinMode() to set up PWM
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The second difference is that on the Maple, you **must** set up the pin
+for PWM output using :ref:`lang-pinmode`\ , with argument ``PWM``.
+This should just be one extra line of code in your
+:ref:`lang-setup` function. Example::
+
+ void setup() {
+ // set up pin 9 for PWM
+ pinMode(9, PWM);
+ }
+
+This also means that you can't later call :ref:`lang-digitalread`
+or :ref:`lang-digitalwrite` on that pin (unless some time in
+between, you use pinMode() to reconfigure that pin for ``INPUT`` or
+``OUTPUT``; see the :ref:`lang-pinmode` page for more information).
+
+Difference 3: No PWM on pin 10
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+On the Maple, the pins which support PWM are: 0, 1, 2, 3, 5, 6, 7, 8,
+9, 11, 12, and 14, or twelve pins in total. That is at least as
+*many* PWM pins as any Arduino board, but there are differences in
+*which* pins support it.
+
+* On **most Arduino boards** (those with the ATmega168 or ATmega328;
+ this includes the **Arduino Uno**), this function works on pins 3,
+ 5, 6, 9, 10, and 11, or six pins total. Note that these boards
+ support PWM on pin 10, while Maple does not.
+
+* On the **Arduino Mega**, PWM works on pins 2 through 13, or twelve pins
+ total. Note that this board supports PWM on pins 4, 10, and 13,
+ while the Maple does not. Maple supports PWM on pins 0, 1, and 14,
+ which the Mega does not, making the total number of pins supporting
+ PWM equal on these boards.
+
+* **Older Arduino boards** with an ATmega8 only support analogWrite() on
+ pins 9, 10, and 11. Maple does not support PWM on pin 10.
+
+In all cases, Arduino boards support PWM on pin 10, unlike Maple. We
+did our best to make PWM as pin-compatible as possible; however,
+circuit layout constraints prevented us from achieving perfect
+compatibility.
+
+The "safest" pins to use for PWM output are pins 9 and 11. These pins
+work on any Arduino board and on Maple. The "safe" pins, which work
+on most recent Arduino boards, the Arduino Mega and the Maple, are
+pins 3, 5, 6, 9, and 11. Thus, if you want your project to be as
+portable as possible between Maple and Arduino, we recommend using the
+"safest" pins first, then the "safe" pins, as necessary.
+
+Difference 4: PWM frequency
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The frequency of the PWM signal (i.e., the frequency of a complete
+on/off cycle) on the Arduino is approximately 490 Hz.
+
+On the Maple, the frequency is configurable, defaulting to about 1100
+Hz, or 1.1 KHz. This is because the PWM frequency is the frequency of
+the timer which controls PWM output on the particular pin (\
+:ref:`the PWM tutorial has the details <pwm>`\ ).
+
+If your application absolutely requires Arduino's PWM frequency (it
+probably doesn't), then the steps are:
+
+1. Figure out which timer controls PWM output on your pin (\ :ref:`this table <pwm-timer-table>` is your friend here). Let's say it's ``Timern``\ , where ``n`` is some number 1, 2, 3, or 4.
+
+2. Call ``Timern.setPeriod(2041)``\ . This will set the timer's period to approximately 2041 microseconds, which is a frequency of approximately 490 Hz.
+
+Be aware that this will change the period for the **entire timer**\ ,
+and will affect anything else in your program that depends on that
+timer. One example is :ref:`interrupts <timers-attachinterrupt>`\ .
+You've been :ref:`warned <timers-pwm-conflicts>`\ .
+
+See also
+--------
+
+- :ref:`Maple PWM tutorial <pwm>`
+
+.. rubric:: Footnotes
+
+.. [#fbytemax] This is because the value for the duty cycle on Arduino
+ must fit in 1 byte of memory, and an unsigned (i.e., nonnegative)
+ integer with size 1 byte can hold the values between 0 and 255.
+
+.. [#fuint16max] This is because the value for the duty cycle on the
+ Maple uses 2 bytes of memory, and an unsigned (i.e., nonnegative)
+ integer with size 2 bytes can hold the values between 0 and 65,535.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/attachinterrupt.rst b/docs/source/lang/api/attachinterrupt.rst
new file mode 100644
index 0000000..0b8907f
--- /dev/null
+++ b/docs/source/lang/api/attachinterrupt.rst
@@ -0,0 +1,102 @@
+.. highlight:: cpp
+
+.. _lang-attachinterrupt:
+
+attachInterrupt()
+=================
+
+Used to specify a function to call when an external interrupt (like an
+GPIO changing from LOW to HIGH, a button getting pressed, etc.)
+occurs.
+
+.. contents:: Contents
+ :local:
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: attachInterrupt
+
+.. doxygenenum:: ExtIntTriggerMode
+
+.. doxygentypedef:: voidFuncPtr
+
+Discussion
+----------
+
+Because the function will run in interrupt context, inside of it,
+:ref:`lang-delay` won't work, and the value returned by
+:ref:`lang-millis` will not increment. Serial data received while
+in the function may be lost. You should declare as ``volatile`` any
+global variables that you modify within the attached function.
+
+There are a few constraints you should be aware of if you're using
+more than one interrupt at a time; the :ref:`external-interrupts` page
+has the details.
+
+
+Using Interrupts
+----------------
+
+Interrupts are useful for making things happen automatically in
+microcontroller programs, and can help solve timing problems. A
+good task for using an interrupt might be reading a rotary encoder,
+or monitoring user input.
+
+
+If you wanted to insure that a program always caught the pulses
+from a rotary encoder, never missing a pulse, it would make it very
+tricky to write a program to do anything else, because the program
+would need to constantly poll the sensor lines for the encoder, in
+order to catch pulses when they occurred. Other sensors have a
+similar interface dynamic too, such as trying to read a sound
+sensor that is trying to catch a click, or an infrared slot sensor
+(photo-interrupter) trying to catch a coin drop. In all of these
+situations, using an interrupt can free the microcontroller to get
+some other work done while not missing the doorbell.
+
+
+Example
+-------
+
+::
+
+ int maple_led_pin = 13;
+ volatile int state = LOW; // must declare volatile, since it's
+ // modified within the blink handler
+
+ void setup() {
+ pinMode(maple_led_pin, OUTPUT);
+ attachInterrupt(0, blink, CHANGE);
+ }
+
+ void loop() {
+ digitalWrite(maple_led_pin, state);
+ }
+
+ void blink() {
+ state = !state;
+ }
+
+
+Arduino Compatibility
+---------------------
+
+Most Arduino boards have two external interrupts: numbers 0 (on
+digital pin 2) and 1 (on digital pin 3). The Arduino Mega has an
+additional four: numbers 2 (pin 21), 3 (pin 20), 4 (pin 19), and 5
+(pin 18). On the Maple, you don't have to remember which interrupt
+number goes with which pin -- just tell ``attachInterrupt()`` the pin
+you want.
+
+
+See also
+--------
+
+
+- :ref:`detachInterrupt <lang-detachinterrupt>`
+- :ref:`external-interrupts`
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/bit.rst b/docs/source/lang/api/bit.rst
new file mode 100644
index 0000000..dd5c050
--- /dev/null
+++ b/docs/source/lang/api/bit.rst
@@ -0,0 +1,44 @@
+.. _lang-bit:
+
+bit()
+=====
+
+(Macro) Computes the value of an (unsigned) integer with the specified
+bit set (``bit(0)`` is 1, ``bit(1)`` is 2, ``bit(2)`` is 4, then 8,
+16, 32, etc.).
+
+Syntax
+------
+
+``bit(n)``
+
+
+Parameters
+----------
+
+* **n** the bit to set.
+
+
+Value
+-----
+
+The value of an integer with the given bit set.
+
+
+Arduino Compatibility
+---------------------
+
+The Maple implementation of bit is compatible with Arduino.
+
+
+See also
+--------
+
+
+- :ref:`lang-bitread`
+- :ref:`lang-bitwrite`
+- :ref:`lang-bitset`
+- :ref:`lang-bitclear`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/bitclear.rst b/docs/source/lang/api/bitclear.rst
new file mode 100644
index 0000000..941f912
--- /dev/null
+++ b/docs/source/lang/api/bitclear.rst
@@ -0,0 +1,44 @@
+.. _lang-bitclear:
+
+bitClear()
+==========
+
+(Macro) Clears (writes a 0 to) a bit of a numeric variable.
+
+Syntax
+------
+
+``bitClear(x, n)``
+
+
+Parameters
+----------
+
+* **x** the numeric variable whose bit to clear
+
+* **n** which bit to clear, starting at 0 for the least-significant
+ (rightmost) bit
+
+
+Returns
+-------
+
+None.
+
+
+Arduino Compatibility
+---------------------
+
+This implementation is compatible with that of Arduino.
+
+
+See also
+--------
+
+- :ref:`bit <lang-bit>`\ ()
+- :ref:`bitRead <lang-bitread>`\ ()
+- :ref:`bitWrite <lang-bitwrite>`\ ()
+- :ref:`bitSet <lang-bitset>`\ ()
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/bitread.rst b/docs/source/lang/api/bitread.rst
new file mode 100644
index 0000000..46b4478
--- /dev/null
+++ b/docs/source/lang/api/bitread.rst
@@ -0,0 +1,46 @@
+.. _lang-bitread:
+
+bitRead()
+=========
+
+(Macro) Gets the value of a bit in a number.
+
+
+Syntax
+------
+
+``bitRead(x, n)``
+
+
+Parameters
+----------
+
+* **x** the number from which to read the bit.
+
+* **n** which bit to read, starting at 0 for the least-significant
+ (rightmost) bit
+
+
+Value
+-----
+
+The value of the bit (0 or 1).
+
+
+Arduino Compatibility
+---------------------
+
+The Maple implementation of ``bitRead`` is compatible with Arduino.
+
+
+See also
+--------
+
+
+- :ref:`lang-bit`
+- :ref:`lang-bitwrite`
+- :ref:`lang-bitset`
+- :ref:`lang-bitclear`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/bitset.rst b/docs/source/lang/api/bitset.rst
new file mode 100644
index 0000000..ccd76de
--- /dev/null
+++ b/docs/source/lang/api/bitset.rst
@@ -0,0 +1,46 @@
+.. _lang-bitset:
+
+bitSet()
+========
+
+(Macro) Sets (writes a 1 to) a bit of a numeric variable.
+
+
+Syntax
+------
+
+``bitSet(x, n)``
+
+
+Parameters
+----------
+
+* **x** the numeric variable whose bit to set
+
+* **n** which bit to set, starting at 0 for the least-significant
+ (rightmost) bit
+
+
+Value
+-----
+
+None.
+
+
+Arduino Compatibility
+---------------------
+
+The Maple implementation of bitSet is compatible with Arduino.
+
+
+See Also
+--------
+
+- :ref:`lang-bit`
+- :ref:`lang-bitread`
+- :ref:`lang-bitwrite`
+- :ref:`lang-bitclear`
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/bitwrite.rst b/docs/source/lang/api/bitwrite.rst
new file mode 100644
index 0000000..b3feff2
--- /dev/null
+++ b/docs/source/lang/api/bitwrite.rst
@@ -0,0 +1,46 @@
+.. highlight:: cpp
+
+.. _lang-bitwrite:
+
+bitWrite()
+==========
+
+(Macro) Writes a bit of a numeric variable.
+
+Syntax
+------
+
+::
+
+ bitWrite(x, n, b)
+
+Parameters
+----------
+
+**x**: the numeric variable whose bit to write.
+
+**n**: which bit of the number to write, starting at 0 for the
+least-significant (rightmost) bit.
+
+**b**: the value to write to the bit (0 or 1).
+
+Returns
+-------
+
+Nothing.
+
+Arduino Compatibility
+---------------------
+
+Maple's version of ``bitWrite()`` is compatible with Arduino.
+
+See also
+--------
+
+- :ref:`bit() <lang-bit>`
+- :ref:`bitRead() <lang-bitRead>`
+- :ref:`bitSet() <lang-bitSet>`
+- :ref:`bitClear() <lang-bitClear>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/cc-attribution.txt b/docs/source/lang/api/cc-attribution.txt
new file mode 100644
index 0000000..e100140
--- /dev/null
+++ b/docs/source/lang/api/cc-attribution.txt
@@ -0,0 +1,9 @@
+.. Included in all this directory's files in order to satisfy the
+.. Arduino CC Attribution-ShareAlike 3.0 License
+
+.. admonition:: License and Attribution
+
+ This documentation page was adapted from the `Arduino Reference
+ Documentation <http://arduino.cc/en/Reference/HomePage>`_\ , which
+ is released under a `Creative Commons Attribution-ShareAlike 3.0
+ License <http://creativecommons.org/licenses/by-sa/3.0/>`_.
diff --git a/docs/source/lang/api/constants.rst b/docs/source/lang/api/constants.rst
new file mode 100644
index 0000000..bc5c894
--- /dev/null
+++ b/docs/source/lang/api/constants.rst
@@ -0,0 +1,304 @@
+.. _lang-constants:
+
+Constants
+=========
+
+Constants are like predefined variables, whose values can't
+change. They are used to make the programs easier to read and modify.
+This page describes the most commonly used constants.
+
+.. contents:: Contents
+ :local:
+
+.. _lang-constants-bool:
+
+Boolean Constants
+-----------------
+
+There are two constants used to represent truth and falsity: ``true``,
+and ``false``.
+
+.. _lang-constants-false:
+
+false
+^^^^^
+
+``false`` is the false ``bool`` value. An integer which is 0 evaluates
+to ``false`` as a boolean.
+
+.. _lang-constants-true:
+
+true
+^^^^
+
+``true`` is the true ``bool`` value. As an integer, ``true`` is often
+said to be 1. This is correct in the sense that ``true`` evaluates to
+1 as an integer. However, any integer which is *non-zero* is ``true``
+as a :ref:`bool <lang-booleanvariables>`. So -1, 2 and -200 are all
+"true", in the sense that these numbers are treated the same as
+``true`` in a boolean context.
+
+Note that the ``true`` and ``false`` constants are typed in lowercase;
+unlike e.g. ``HIGH``, ``LOW``, ``INPUT``, and ``OUTPUT`` (which are
+described below).
+
+
+Pin Levels: HIGH and LOW
+------------------------
+
+When reading or writing to a digital pin there are only two possible
+values a pin can be set to: ``HIGH`` and ``LOW``.
+
+.. _lang-constants-high:
+
+HIGH
+^^^^
+
+The meaning of ``HIGH`` (in reference to a pin) is somewhat different
+depending on whether the pin is set to ``INPUT`` or ``OUTPUT``. When a
+pin is configured as an ``INPUT`` (using :ref:`pinMode()
+<lang-pinmode>`), and read with :ref:`digitalRead()
+<lang-digitalread>`, the microcontroller will report ``HIGH`` if a
+voltage of 3 volts or more is present at the pin.
+
+.. TODO? Following seems false; check it out sometime, leave out for now:
+
+.. A pin may also be configured as an ``INPUT`` with ``pinMode()``, and
+.. subsequently made ``HIGH`` with :ref:`digitalWrite()
+.. <lang-digitalwrite>`, this will set the internal pullup resistors,
+.. which will *steer* the input pin to a HIGH reading unless it is pulled
+.. LOW by external circuitry.
+
+When a pin is configured to ``OUTPUT`` with pinMode, and set to
+``HIGH`` with :ref:`digitalWrite() <lang-digitalwrite>`, the pin is at
+3.3 volts. In this state it can *source* current, e.g. light an LED
+that is connected through a series resistor to ground, or to another
+pin configured as an output and set to ``LOW``.
+
+.. _lang-constants-low:
+
+LOW
+^^^
+
+The meaning of ``LOW`` also has a different meaning depending on
+whether a pin is set to ``INPUT`` or ``OUTPUT``. When a pin is
+configured as an ``INPUT`` with :ref:`pinMode() <lang-pinmode>`, and
+read with :ref:`digitalRead() <lang-digitalread>`, the microcontroller
+will report ``LOW`` if a voltage of 2 volts or less is present at the
+pin.
+
+When a pin is configured to ``OUTPUT`` with ``pinMode()``, and set to
+``LOW`` with :ref:`digitalWrite() <lang-digitalwrite>`, the
+microcontroller will attempt to keep that pin's voltage at 0V. In this
+state it can *sink* current, e.g. light an LED that is connected
+through a series resistor to +3.3V, or to another pin configured as an
+output, and set to ``HIGH``.
+
+Pin Modes
+---------
+
+Digital pins can be used in a variety of modes. The basic modes,
+``INPUT`` and ``OUTPUT``, have been introduced above. Changing a pin
+from ``INPUT`` TO ``OUTPUT`` with :ref:`pinMode() <lang-pinmode>`
+drastically changes the electrical behavior of the pin.
+
+This section describes the basic digital pin modes (``INPUT`` and
+``OUTPUT``) only. For a detailed description of all possible pin
+modes, see the :ref:`pinMode() <lang-pinmode>` reference page.
+
+.. _lang-constants-input:
+
+INPUT
+^^^^^
+
+Maple (STM32) pins configured as ``INPUT`` are said to be in a
+high-impedance state. One way of explaining this is that pins
+configured as ``INPUT`` make extremely small demands on the circuit
+that they are sampling. This makes them useful for reading a sensor,
+but not powering an LED.
+
+.. _lang-constants-output:
+
+OUTPUT
+^^^^^^
+
+Pins configured as ``OUTPUT`` with :ref:`pinMode() <lang-pinmode>` are
+said to be in a low-impedance state. This means that they can provide
+a substantial amount of current to other circuits. STM32 pins can
+source (provide positive current) or sink (provide negative current)
+up to 50 mA (milliamps) of current to other devices/circuits. This
+makes them useful for powering LEDs, but useless for reading sensors.
+
+Pins configured as outputs can also be damaged or destroyed if short
+circuited to either ground or 3.3V power rails. The amount of current
+provided by an STM32 pin is also not enough to power most relays or
+motors, and some interface circuitry will be required.
+
+.. _lang-constants-integers:
+
+Integer Constants
+-----------------
+
+Integer constants (or more properly speaking, integer *literals*) are
+numbers used directly in a sketch, like ``123``. By default, an
+integer literal is treated as a (signed) :ref:`int <lang-int>`, but
+you can change this with the U and L modifiers (see :ref:`below
+<lang-constants-integers-u-l>`). You can specify negative numbers by
+putting a minus sign in front, like ``-123``.
+
+Normally, integer literals are treated as base 10 (decimal) integers,
+but special notation (formatters) may be used to enter numbers in
+other bases. These are summarized in the following table:
+
+.. list-table::
+ :header-rows: 1
+
+ * - Base
+ - Example
+ - Formatter
+ - Comment
+
+ * - 10 (decimal)
+ - ``123``
+ - None
+ -
+
+ * - 2 (binary)
+ - ``0b1111011``
+ - Leading "0b"
+ - GCC extension; not standard C++
+
+ * - 8 (octal)
+ - ``0173``
+ - Leading "0"
+ - Characters 0-7 valid
+
+ * - 16 (hexadecimal)
+ - ``0x7B``
+ - Leading "0x"
+ - Characters 0-9, A-F (or a-f) valid
+
+Binary constants (like ``B1111011``) for values between 0 and 255 are
+supported for compatibility with Arduino only. Their use in new
+programs is discouraged.
+
+.. _lang-constants-integers-dec:
+
+**Decimal** is base 10. This is the common number system we learn in
+school. Integer literals without other prefixes are assumed to be in
+decimal format.
+
+For example, the decimal literal ``101`` is one hundred and one: 1×10\
+:sup:`2` + 0×10\ :sup:`1` + 1×10\ :sup:`0` = 101.
+
+.. _lang-constants-integers-bin:
+
+**Binary** is base two. Only characters 0 and 1 are valid. Binary
+literals are indicated by the prefix ``0b`` (this is a :ref:`GCC
+<arm-gcc>` extension; it's not standard C++).
+
+For example, the binary literal ``0b101`` is five: 1×2\ :sup:`2` +
+0×2\ :sup:`1` + 1×2\ :sup:`0` = 5.
+
+.. _lang-constants-integers-oct:
+
+**Octal** is base eight. Only characters 0 through 7 are valid. Octal
+literals are indicated by the prefix ``0``.
+
+For example, the octal literal ``0101`` is sixty five: 1×8\ :sup:`2` +
+0×8\ :sup:`1` + 1×8\ :sup:`0` = 65.
+
+.. warning:: Bugs sometimes result by (unintentionally) including a
+ leading "0" before an integer literal, which makes the compiler
+ interpret it in octal.
+
+.. _lang-constants-integers-hex:
+
+**Hexadecimal** (or "hex") is base sixteen. Valid characters are 0
+through 9 and letters A through F; A has the value 10, B is 11, up to
+F, which is 15. Hex values are indicated by the prefix ``0x``. A-F
+may be typed in upper or lower case (a-f).
+
+For example, the hexadecimal literal ``0x101`` is two hundred fifty
+seven: 1×16\ :sup:`2` + 0×16\ :sup:`1` + 1×16\ :sup:`0` = 257.
+
+The hexadecimal literal ``0xCF2`` is three thousand, three hundred
+fourteen: 12×16\ :sup:`2` + 15×16\ :sup:`1` + 2×16\ :sup:`0` = 3314.
+
+(Remember that in hex, ``A`` means 10, and counting up, ``B``\ =11, so
+``C``\ =12 and ``F``\ =15).
+
+.. _lang-constants-integers-u-l:
+
+U and L Suffixes
+^^^^^^^^^^^^^^^^
+
+By default, an integer constant is treated as an :ref:`int
+<lang-int>`, with the attendant :ref:`limitations in values
+<lang-int-overflow>`. To specify an integer constant with another data
+type, follow it with:
+
+- a ``u`` or ``U`` to interpret the constant as an unsigned value.
+ For example, ``33U`` is an :ref:`unsigned int <lang-unsignedint>`.
+
+- an ``l`` or ``L`` to interpret the constant as a long value. For
+ example, ``100000L`` is a :ref:`long <lang-long>`.
+
+- a ``ul`` or ``UL`` to do both. For example, ``32767UL`` is an
+ :ref:`unsigned long <lang-unsignedlong>`.
+
+.. _lang-constants-fp:
+
+Floating-Point Constants
+------------------------
+
+Similar to integer literals, floating point constants (properly:
+floating-point *literals*) are used to make code more readable.
+Floating point literals are swapped at compile time for the value to
+which the expression evaluates.
+
+A floating point literal is any number which includes a decimal point.
+For instance, ``3.0`` is a floating-point literal for the number 3.
+By default, a floating-point literal is a :ref:`double <lang-double>`.
+In order for the literal to be interpreted as a :ref:`float
+<lang-float>`, you can write ``f`` directly after it. For example,
+``3.0f`` is a floating-point literal with type ``float``.
+
+Floating point constants can also be expressed in a variety of
+scientific notation. ``E`` and ``e`` are both accepted as valid
+exponent indicators. Some examples are given in the following table:
+
+
+.. list-table::
+ :header-rows: 1
+
+ * - Floating-point literal
+ - Evaluates to
+ - Alternate expression
+
+ * - ``10.0``
+ - 10
+ -
+
+ * - ``2.34E5``
+ - 2.34×10\ :sup:`5`
+ - ``234000.0``
+
+ * - ``67e-12``
+ - 67.0×10\ :sup:`-12`
+ - ``0.000000000067``
+
+See Also
+--------
+
+- :ref:`pinMode() <lang-pinmode>`
+- :ref:`Boolean Variables <lang-booleanvariables>`
+- :ref:`#define <lang-define>`
+- :ref:`int <lang-int>`
+- :ref:`unsigned int <lang-unsignedint>`
+- :ref:`long <lang-long>`
+- :ref:`unsigned long <lang-unsignedlong>`
+- :ref:`float <lang-float>`
+- :ref:`double <lang-double>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/constrain.rst b/docs/source/lang/api/constrain.rst
new file mode 100644
index 0000000..d19b61c
--- /dev/null
+++ b/docs/source/lang/api/constrain.rst
@@ -0,0 +1,69 @@
+.. highlight:: cpp
+
+.. _lang-constrain:
+
+constrain()
+===========
+
+(Macro) Constrains a number to be within a range.
+
+Syntax
+------
+
+::
+
+ constrain(x, a, b)
+
+
+Parameters
+----------
+
+**x**: the number to constrain
+
+**a**: the lower end of the range
+
+**b**: the upper end of the range
+
+Returns
+-------
+
+**x**: if **x** is between **a** and **b**
+
+**a**: if **x** is less than **a**
+
+**b**: if **x** is greater than **b**
+
+Example
+-------
+
+::
+
+ // limits range of sensor values to between 10 and 150:
+ sensVal = constrain(sensVal, 10, 150);
+
+
+Warning
+-------
+
+Because of the way ``constrain()`` is implemented, avoid using other
+functions or causing side effects inside the parentheses, as it may
+lead to incorrect results::
+
+ constrain(x,a++,b); // avoid this - yields incorrect results
+
+ constrain(x,a,b); // use this instead-
+ a++; // keep other math outside constrain()
+
+Arduino Compatibility
+---------------------
+
+Maple's implementation of ``constrain()`` is compatible with Arduino.
+
+See also
+--------
+
+- :ref:`min() <lang-min>`
+- :ref:`max() <lang-max>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/cos.rst b/docs/source/lang/api/cos.rst
new file mode 100644
index 0000000..3fbb0af
--- /dev/null
+++ b/docs/source/lang/api/cos.rst
@@ -0,0 +1,32 @@
+.. _lang-cos:
+
+cos()
+=====
+
+Calculates the cosine of an angle.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: cos
+
+Arduino Compatibility
+---------------------
+
+The Maple ``cos()`` implementation is compatible with Arduino.
+
+Note that the Maple implementation comes from `newlib
+<http://sourceware.org/newlib/>`_\ , while Arduino's is that of
+`avr-libc <http://avr-libc.nongnu.org/>`_\ .
+
+See also
+--------
+
+
+- :ref:`sin() <lang-sin>`
+- :ref:`tan() <lang-tan>`
+- :ref:`float <lang-float>`
+- :ref:`double <lang-double>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/delay.rst b/docs/source/lang/api/delay.rst
new file mode 100644
index 0000000..90ca268
--- /dev/null
+++ b/docs/source/lang/api/delay.rst
@@ -0,0 +1,72 @@
+.. highlight:: cpp
+
+.. _lang-delay:
+
+delay()
+=======
+
+Pauses the program for at least a given number of milliseconds. (There
+are 1000 milliseconds in a second.)
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: delay
+
+
+Discussion
+----------
+
+While it is easy to create a blinking LED with the ``delay()``
+function, and many sketches use short delays for such tasks as switch
+debouncing, the use of ``delay()`` in a sketch has significant
+drawbacks. No other reading of sensors, mathematical calculations, or
+pin manipulation can go on during the delay function, so in effect, it
+brings most other activity to a halt. For alternative approaches to
+controlling timing see the :ref:`millis() <lang-millis>` function
+and the "Blink Without Delay" sketch cited :ref:`below
+<lang-delay-seealso>`\ . More knowledgeable programmers usually
+avoid the use of ``delay()`` for timing of events longer than tens of
+milliseconds, unless the sketch is very simple.
+
+Certain things *do* go on while the ``delay()`` function is
+controlling the STM32 chip, however, because the delay function does
+not disable interrupts. Serial communication that appears at the RX
+pin is recorded, PWM (see :ref:`pwmWrite() <lang-pwmwrite>`\ ) values
+and pin states are maintained, and :ref:`interrupts
+<lang-attachinterrupt>` will work as they should.
+
+
+Example
+-------
+
+::
+
+ int ledPin = 13; // LED connected to pin 13
+
+ void setup() {
+ pinMode(ledPin, OUTPUT); // sets the digital pin as output
+ }
+
+ void loop() {
+ digitalWrite(ledPin, HIGH); // sets the LED on
+ delay(1000); // waits for a second
+ digitalWrite(ledPin, LOW); // sets the LED off
+ delay(1000); // waits for a second
+ }
+
+.. _lang-delay-seealso:
+
+See also
+--------
+
+
+- :ref:`millis() <lang-millis>`
+- :ref:`micros() <lang-micros>`
+- :ref:`delayMicroseconds() <lang-delayMicroseconds>`
+- (Arduino) `Blink Without Delay
+ <http://arduino.cc/en/Tutorial/BlinkWithoutDelay>`_ example (works
+ unmodified on Maple)
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/delaymicroseconds.rst b/docs/source/lang/api/delaymicroseconds.rst
new file mode 100644
index 0000000..24a8286
--- /dev/null
+++ b/docs/source/lang/api/delaymicroseconds.rst
@@ -0,0 +1,65 @@
+.. highlight:: cpp
+
+.. _lang-delaymicroseconds:
+
+delayMicroseconds()
+===================
+
+Pauses the program for the amount of time (in microseconds)
+specified as parameter. There are a thousand microseconds in a
+millisecond, and a million microseconds in a second.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: delayMicroseconds
+
+
+Example
+-------
+
+The following example configures pin number 8 to work as an output
+pin, and sends a train of pulses with a period of roughly 100
+microseconds::
+
+ int outPin = 8;
+
+ void setup() {
+ pinMode(outPin, OUTPUT); // sets the digital pin as output
+ }
+
+ void loop() {
+ digitalWrite(outPin, HIGH); // sets the pin on
+ delayMicroseconds(50); // pauses for 50 microseconds
+ digitalWrite(outPin, LOW); // sets the pin off
+ delayMicroseconds(50); // pauses for 50 microseconds
+ }
+
+
+Caveats and Known Issues
+------------------------
+
+The longest time ``delayMicroseconds()`` can delay is bounded by its
+argument type and the STM32 clock rate to be (2^32 - 1) / 12
+microseconds, or less than 6 minutes. For longer pauses, use of
+:ref:`lang-delay` is possible.
+
+Arduino Compatibility
+---------------------
+
+While we have made every effort we could to ensure that the timing of
+delayMicroseconds is as accurate as possible, we cannot guarantee it
+will behave as the Arduino implementation down to the microsecond,
+especially for smaller values of ``us``.
+
+See Also
+--------
+
+- :ref:`millis <lang-millis>`
+- :ref:`micros <lang-micros>`
+- :ref:`delay <lang-delay>`
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/detachinterrupt.rst b/docs/source/lang/api/detachinterrupt.rst
new file mode 100644
index 0000000..adb2439
--- /dev/null
+++ b/docs/source/lang/api/detachinterrupt.rst
@@ -0,0 +1,37 @@
+.. _lang-detachinterrupt:
+
+detachInterrupt()
+=================
+
+Used to disable an interrupt specified with
+:ref:`lang-attachinterrupt`\ .
+
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: detachInterrupt
+
+Arduino Compatibility
+---------------------
+
+There is one important difference between the Maple version of
+detachInterrupt and the Arduino version. On the Maple, the argument
+to ``detachInterrupt()`` is the *pin* on which the interrupt is
+attached, while on the Arduino, the argument is the *interrupt
+number*, which is different from the pin the interrupt is enabled on.
+
+If you're calling this function, you've already called
+:ref:`lang-attachinterrupt` to set up your interrupt handler, so
+just call ``detachInterrupt()`` with the same pin argument you gave to
+``attachInterrupt()``.
+
+See Also
+--------
+
+- :ref:`attachInterrupt() <lang-attachInterrupt>`
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/digitalread.rst b/docs/source/lang/api/digitalread.rst
new file mode 100644
index 0000000..3502587
--- /dev/null
+++ b/docs/source/lang/api/digitalread.rst
@@ -0,0 +1,58 @@
+.. highlight:: cpp
+
+.. _lang-digitalread:
+
+digitalRead()
+=============
+
+Reads the value from a specified digital pin, either :ref:`HIGH
+<lang-constants-high>` or :ref:`LOW <lang-constants-low>`.
+
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: digitalRead
+
+
+Example
+-------
+
+The following example turns the LED on when the button is pressed::
+
+ int ledPin = 13; // LED connected to Maple pin 13
+ int buttonPin = 38; // BUT connected to Maple pin 38
+
+ void setup() {
+ pinMode(ledPin, OUTPUT);
+ pinMode(buttonPin, INPUT);
+ }
+
+ void loop() {
+ int val = digitalRead(buttonPin); // reads the input pin
+ digitalWrite(ledPin, val);
+ }
+
+Note
+----
+
+If the pin isn't connected to anything, ``digitalRead()`` can return
+either HIGH or LOW (and this can change in a way that seems random).
+
+Arduino Compatibility
+---------------------
+
+The Maple version of ``digitalRead()`` is compatible with Arduino.
+
+
+See Also
+--------
+
+- :ref:`pinMode <lang-pinMode>`
+- :ref:`digitalWrite <lang-digitalWrite>`
+
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/digitalwrite.rst b/docs/source/lang/api/digitalwrite.rst
new file mode 100644
index 0000000..6124d5f
--- /dev/null
+++ b/docs/source/lang/api/digitalwrite.rst
@@ -0,0 +1,68 @@
+.. highlight:: cpp
+
+.. _lang-digitalwrite:
+
+digitalWrite()
+==============
+
+Write a :ref:`HIGH <lang-constants-high>` or a :ref:`LOW
+<lang-constants-low>` value to a pin configured as :ref:`OUTPUT
+<lang-constants-output>`.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: digitalWrite
+
+Discussion
+----------
+
+If the pin has been configured as an ``OUTPUT`` with :ref:`pinMode()
+<lang-pinmode>` its voltage will be set to the corresponding value:
+3.3V for ``HIGH``, and 0V (ground) for ``LOW``.
+
+.. TODO make the following paragraphs true, but refer the reader to
+.. INPUT_PULLUP and INPUT_PULLDOWN:
+
+If the pin is configured as an ``INPUT``, writing a ``HIGH`` value
+with ``digitalWrite()`` will enable an internal pullup resistor.
+Writing ``LOW`` will disable the pullup. The pullup resistor is enough
+to light an LED dimly, so if LEDs appear to work, but very dimly, this
+is a likely cause. The remedy is to set the pin to an output with the
+:ref:`pinMode() <lang-pinmode>` function.
+
+.. note:: Pin 13 is harder to use as an input than the other pins
+ because it has an LED and resistor soldered to it in series. If you
+ enable its internal pull-up resistor, it will likely hang at around
+ 1.1V instead of the expected 3.3V because the onboard LED and
+ series resistor pull the voltage level down. If you must use pin 13
+ as a digital input, use an external pull-down resistor.
+
+Example
+-------
+
+The following example sets pin 13 to ``HIGH``, makes a one-second-long
+delay, sets the pin back to ``LOW``, and delays again, causing a
+blinking pattern::
+
+
+ int ledPin = 13; // LED connected to digital pin 13
+
+ void setup() {
+ pinMode(ledPin, OUTPUT); // sets the digital pin as output
+ }
+
+ void loop() {
+ digitalWrite(ledPin, HIGH); // sets the LED on
+ delay(1000); // waits for a second
+ digitalWrite(ledPin, LOW); // sets the LED off
+ delay(1000); // waits for a second
+ }
+
+See Also
+--------
+
+- :ref:`pinMode <lang-pinmode>`
+- :ref:`digitalRead <lang-digitalread>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/highbyte.rst b/docs/source/lang/api/highbyte.rst
new file mode 100644
index 0000000..50a1fa6
--- /dev/null
+++ b/docs/source/lang/api/highbyte.rst
@@ -0,0 +1,59 @@
+.. highlight:: cpp
+
+.. _lang-highbyte:
+
+highByte()
+==========
+
+(Macro) Extracts the second lowest byte of an integral data type.
+
+.. warning:: This macro is provided for compatibility with Arduino
+ only. It returns the second-least significant byte in an integral
+ value. It makes sense to call this the "high" byte on a 16-bit
+ ``int`` microcontroller like the Atmel chips on Arduinos, but it
+ makes no sense at all on a 32-bit microcontroller like the STM32s
+ in the Maple line.
+
+ In short: we provide this so that existing Arduino code works as
+ expected, but **strongly discourage its use** in new programs.
+
+Syntax
+------
+
+::
+
+ highByte(x)
+
+Parameters
+----------
+
+**x**: a value of any integral type.
+
+Returns
+-------
+
+Second lowest byte in **x**.
+
+Example
+-------
+
+::
+
+ int x = 0xDEADBEEF;
+ SerialUSB.println(x, HEX); // prints "BE"
+
+Arduino Compatibility
+---------------------
+
+The Maple version of ``highByte()`` is compatible with Arduino.
+
+See Also
+--------
+
+- :ref:`lowByte() <lang-lowbyte>`
+
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/loop.rst b/docs/source/lang/api/loop.rst
new file mode 100644
index 0000000..d8f6183
--- /dev/null
+++ b/docs/source/lang/api/loop.rst
@@ -0,0 +1,45 @@
+.. highlight:: cpp
+
+.. _lang-loop:
+
+loop()
+======
+
+After creating a :ref:`setup() <lang-setup>` function, which
+initializes your sketch, the ``loop()`` function gets called
+repeatedly, allowing your program to change and respond. Use it to
+actively control your Maple board.
+
+Example
+-------
+
+::
+
+
+ int buttonPin = 38;
+
+ // setup initializes serial and the button pin
+ void setup() {
+ SerialUSB.begin();
+ pinMode(buttonPin, INPUT);
+ }
+
+ // loop() checks the button pin each time it executes,
+ // and will print 'H' if it is pressed, 'L' otherwise
+ void loop() {
+ if (digitalRead(buttonPin) == HIGH) {
+ SerialUSB.println('H');
+ } else {
+ SerialUSB.println('L');
+ }
+
+ delay(1000);
+ }
+
+See Also
+--------
+
+- :ref:`setup() <lang-setup>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/lowbyte.rst b/docs/source/lang/api/lowbyte.rst
new file mode 100644
index 0000000..58e622f
--- /dev/null
+++ b/docs/source/lang/api/lowbyte.rst
@@ -0,0 +1,25 @@
+.. _lang-lowbyte:
+
+lowByte()
+=========
+
+Extracts the low-order (rightmost) byte of a variable (e.g. a
+word).
+
+Syntax
+------
+
+lowByte(x)
+
+Parameters
+----------
+
+**x**: a value of any type. However, if a non-integral type is used,
+the results will be strange.
+
+Returns
+-------
+
+The low byte's value (this will be between 0 and 255).
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/map.rst b/docs/source/lang/api/map.rst
new file mode 100644
index 0000000..79122b3
--- /dev/null
+++ b/docs/source/lang/api/map.rst
@@ -0,0 +1,68 @@
+.. highlight:: cpp
+
+.. _lang-map:
+
+map()
+=====
+
+Re-maps a number from one range to another.
+
+.. contents:: Contents
+ :local:
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: map
+
+Discussion
+----------
+
+``map()`` does not constrain values to within the range, because
+out-of-range values are sometimes intended and useful. The
+:ref:`constrain() <lang-constrain>` macro may be used either before or
+after this function, if limits to the ranges are desired.
+
+Note that the "lower bounds" of either range may be larger or smaller
+than the "upper bounds" so that ``map()`` may be used to reverse a
+range of numbers; for example::
+
+ y = map(x, 1, 50, 50, 1);
+
+The function also handles negative numbers well, so that this
+example ::
+
+ y = map(x, 1, 50, 50, -100);
+
+is also valid.
+
+The ``map()`` function uses integer math (its arguments and return
+values all have type :ref:`long <lang-long>`), so it will not generate
+fractions, when the math might indicate that it should do so.
+Fractional remainders are truncated, and are not rounded or averaged.
+
+Example
+-------
+
+::
+
+ /* Map an ADC reading (12 bits) to 16-bit PWM (0 to 65,535) */
+
+ void setup() {
+ pinMode(0, INPUT_ANALOG);
+ pinMode(9, PWM);
+ }
+
+ void loop() {
+ int val = analogRead(0);
+ val = map(val, 0, 4095, 0, 65535);
+ analogWrite(9, val);
+ }
+
+
+See Also
+--------
+
+- :ref:`constrain() <lang-constrain>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/max.rst b/docs/source/lang/api/max.rst
new file mode 100644
index 0000000..d38eebe
--- /dev/null
+++ b/docs/source/lang/api/max.rst
@@ -0,0 +1,65 @@
+.. highlight:: cpp
+
+.. _lang-max:
+
+max()
+=====
+
+(Macro) Calculates the maximum of two numbers.
+
+Syntax
+------
+
+::
+
+ max(x, y)
+
+Parameters
+----------
+
+**x**: the first number; may be any number or numeric expression.
+
+**y**: the second number; may be any number or numeric expression.
+
+
+Returns
+-------
+
+The larger of the two parameter values.
+
+Example
+-------
+
+::
+
+ sensVal = max(senVal, 20); // assigns sensVal to the larger of sensVal or 20
+ // (effectively ensuring that it is at least 20)
+
+.. note:: Perhaps counter-intuitively, max() is often used to
+ constrain the lower end of a variable's range, while :ref:`min()
+ <lang-min>` is used to constrain the upper end of the range.
+
+Warning
+-------
+
+Because of the way ``max()`` is implemented, avoid using other
+functions inside the parentheses. It may lead to incorrect results::
+
+ max(a--, 0); // avoid this - yields incorrect results
+
+ a--; // use this instead -
+ max(a, 0); // keep other operations outside max()
+
+Arduino Compatibility
+---------------------
+
+The Maple version of ``max()`` is compatible with Arduino.
+
+See Also
+--------
+
+- :ref:`min() <lang-min>`
+- :ref:`constrain() <lang-constrain>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/micros.rst b/docs/source/lang/api/micros.rst
new file mode 100644
index 0000000..f12976b
--- /dev/null
+++ b/docs/source/lang/api/micros.rst
@@ -0,0 +1,46 @@
+.. highlight:: cpp
+
+.. _lang-micros:
+
+micros()
+========
+
+Returns the number of microseconds since the Maple board began running
+the current program. This number will overflow (go back to zero),
+after approximately 70 minutes.
+
+.. note:: There are 1,000 microseconds in a millisecond, and 1,000,000
+ microseconds in a second.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: micros
+
+Example
+-------
+
+::
+
+ unsigned int time;
+
+ void setup() {
+ }
+
+ void loop() {
+ SerialUSB.print("Time: ");
+ time = micros();
+ // prints time since program started
+ SerialUSB.println(time);
+ // wait a second so as not to send massive amounts of data
+ delay(1000);
+ }
+
+See Also
+--------
+
+- :ref:`millis() <lang-millis>`
+- :ref:`delay() <lang-delay>`
+- :ref:`delayMicroseconds() <lang-delaymicroseconds>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/millis.rst b/docs/source/lang/api/millis.rst
new file mode 100644
index 0000000..54e4507
--- /dev/null
+++ b/docs/source/lang/api/millis.rst
@@ -0,0 +1,52 @@
+.. highlight:: cpp
+
+.. _lang-millis:
+
+millis()
+========
+
+Returns the number of milliseconds since the Maple board began running
+the current program. This number will overflow (go back to zero) after
+approximately 50 days.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: millis
+
+Example
+-------
+
+The following time prints the value returned by ``millis()`` roughly
+once per second::
+
+ unsigned int time;
+
+ void setup() {
+ }
+
+ void loop() {
+ SerialUSB.print("Time: ");
+ time = millis();
+ // prints time since program started
+ Serial.println(time);
+
+ // wait a second so as not to send massive amounts of data
+ delay(1000);
+ }
+
+Tip
+---
+
+Since the return value for ``millis()`` is an :ref:`unsigned long
+<lang-unsignedlong>`, overflow errors may occur if you try to do math
+with other data types, such as :ref:`ints <lang-int>`.
+
+See Also
+--------
+
+- :ref:`micros <lang-micros>`
+- :ref:`delay <lang-delay>`
+- :ref:`delayMicroseconds <lang-delaymicroseconds>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/min.rst b/docs/source/lang/api/min.rst
new file mode 100644
index 0000000..1245f6f
--- /dev/null
+++ b/docs/source/lang/api/min.rst
@@ -0,0 +1,66 @@
+.. highlight:: cpp
+
+.. _lang-min:
+
+min()
+=====
+
+(Macro) Calculates the minimum of two numbers.
+
+Syntax
+------
+
+::
+
+ min(x,y)
+
+Parameters
+----------
+
+**x**: the first number; may be any number or numeric expression.
+
+**y**: the second number; may be any number or numeric expression.
+
+Returns
+-------
+
+The smaller of the two numbers.
+
+Example
+-------
+
+::
+
+ sensVal = min(sensVal, 100); // assigns sensVal to the smaller of sensVal or 100
+ // ensuring that it never gets above 100.
+
+
+.. note:: Perhaps counter-intuitively, max() is often used to
+ constrain the lower end of a variable's range, while min() is used
+ to constrain the upper end of the range.
+
+
+Warning
+-------
+
+Because of the way ``min()`` is implemented, avoid using other
+functions inside the parentheses. It may lead to incorrect results::
+
+ min(a++, 100); // avoid this - yields incorrect results
+
+ a++; // use this instead -
+ min(a, 100); // keep other operations outside min()
+
+Arduino Compatibility
+---------------------
+
+The Maple version of ``min()`` is compatible with Arduino.
+
+See Also
+--------
+
+- :ref:`max() <lang-max>`
+- :ref:`constrain() <lang-constrain>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/pinmode.rst b/docs/source/lang/api/pinmode.rst
new file mode 100644
index 0000000..b9095da
--- /dev/null
+++ b/docs/source/lang/api/pinmode.rst
@@ -0,0 +1,77 @@
+.. highlight:: cpp
+
+.. _lang-pinmode:
+
+pinMode()
+=========
+
+.. contents:: Contents
+ :local:
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: pinMode
+
+.. doxygenenum:: WiringPinMode
+
+Discussion
+----------
+
+``pinMode()`` is usually called within :ref:`lang-setup` in order to
+configure a pin for a certain usage (although it may be called
+anywhere).
+
+Example
+-------
+
+::
+
+ int ledPin = 13; // LED connected to digital pin 13
+
+ void setup() {
+ pinMode(ledPin, OUTPUT); // sets the digital pin as output
+ }
+
+ void loop() {
+ digitalWrite(ledPin, HIGH); // sets the LED on
+ delay(1000); // waits for a second
+ digitalWrite(ledPin, LOW); // sets the LED off
+ delay(1000); // waits for a second
+ }
+
+Arduino Compatibility
+---------------------
+
+.. TODO check out Arduino vs. Maple static discilpline cutoffs to
+.. ensure accuracy of following:
+
+The libmaple implementation of ``pinMode()`` supports the ``INPUT``
+and ``OUTPUT`` modes with semantics identical to that of the Arduino
+function (however, be advised that the Maple, as a 3.3V device, will
+only drive 3.3V to an ``OUTPUT`` pin that has been set ``HIGH``).
+
+``INPUT_ANALOG`` and ``PWM`` modes were added because the Maple does
+not distinguish between analog and digital pins the same way the
+Arduino does. Unlike the Arduino, you **must call** ``pinMode()`` to
+set up a pin for these purposes before a call to, e.g.,
+:ref:`lang-analogRead`. In practice, this should only add a few lines
+to your :ref:`lang-setup` function.
+
+.. TODO verify following before putting it in:
+
+.. ``OUTPUT_OPEN_DRAIN``, ``INPUT_PULLUP``, ``INPUT_PULLDOWN``, and
+.. ``PWM_OPEN_DRAIN`` modes represent functionality not currently
+.. available on Arduino boards.
+
+See also
+--------
+
+- :ref:`lang-constants`
+- :ref:`lang-digitalwrite`
+- :ref:`lang-digitalread`
+- Maple :ref:`GPIO <gpio>` reference page
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/pow.rst b/docs/source/lang/api/pow.rst
new file mode 100644
index 0000000..4280400
--- /dev/null
+++ b/docs/source/lang/api/pow.rst
@@ -0,0 +1,23 @@
+.. _lang-pow:
+
+pow()
+=====
+
+Calculates the value of a number raised to a power.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: pow
+
+.. TODO LATER some examples
+
+See Also
+--------
+
+- :ref:`sqrt() <lang-sqrt>`
+- :ref:`float <lang-float>`
+- :ref:`double <lang-double>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/pwmwrite.rst b/docs/source/lang/api/pwmwrite.rst
new file mode 100644
index 0000000..7a1d51f
--- /dev/null
+++ b/docs/source/lang/api/pwmwrite.rst
@@ -0,0 +1,49 @@
+.. highlight:: cpp
+
+.. _lang-pwmwrite:
+
+pwmWrite()
+==========
+
+Writes a :ref:`PWM wave <pwm>` to a pin. You can use this to make an
+LED get brighter or dimmer, control a servomotor, etc. After a call to
+pwmWrite(), the pin will output a steady square wave with the given
+duty cycle. You can change the duty cycle later by calling pwmWrite()
+again with the same pin and a different duty.
+
+.. contents:: Contents
+ :local:
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: pwmWrite
+
+Example
+-------
+
+Sets the output to the LED proportional to the value read from the
+potentiometer::
+
+ int ledPin = 13; // LED connected to pin 13 (Maple)
+ int analogPin = 3; // potentiometer connected to analog pin 3
+ int val = 0; // variable to store the read value
+
+ void setup() {
+ pinMode(ledPin, OUTPUT); // sets the LED pin as output
+
+ pinMode(analogPin, PWM); // sets the potentiometer pin as PWM
+ // output
+ }
+
+ void loop() {
+ val = analogRead(analogPin); // read the input pin
+
+ analogWrite(ledPin, val / 16); // analogRead values go from 0 to 4095,
+ // analogWrite values from 0 to 65535
+ }
+
+See Also
+--------
+
+- :ref:`Maple PWM tutorial <pwm>`
diff --git a/docs/source/lang/api/random.rst b/docs/source/lang/api/random.rst
new file mode 100644
index 0000000..f2a9762
--- /dev/null
+++ b/docs/source/lang/api/random.rst
@@ -0,0 +1,73 @@
+.. highlight:: cpp
+
+.. _lang-random:
+
+random()
+========
+
+The ``random()`` function generates pseudo-random numbers.
+
+.. TODO keep tracking Sphinx/Breathe's ability to reference overloaded
+.. functions so we can use doxygenfunction instead of manually
+.. documenting this.
+
+Library Documentation
+---------------------
+
+.. cpp:function:: random(long max)
+
+ Same as a call to ``random(0, max)``.
+
+.. cpp:function:: random(long min, long max)
+
+ Generate a pseudo-random number with given lower and upper bounds.
+
+ *Parameters*
+
+ - ``min`` - Lower bound on the returned value, inclusive
+ - ``max`` - Upper bound on the returned value, exclusive
+
+ *Returns*: A pseudo-random number in the range [min, max).
+
+Discussion
+----------
+
+If it is important for a sequence of values generated by
+:ref:`random() <lang-random>` to differ, on subsequent executions of a
+sketch, use :ref:`randomSeed() <lang-randomseed>` to initialize the
+random number generator with a fairly random input, such as
+:ref:`analogRead() <lang-analogread>` on an unconnected pin.
+
+Conversely, it can occasionally be useful to use pseudorandom
+sequences that repeat exactly. This can be accomplished by calling
+``randomSeed()`` with a fixed number, before starting the random
+sequence.
+
+Example
+-------
+
+The following sketch initializes the random seed based on an :ref:`ADC
+<adc>` reading of pin 0. If this pin is unconnected, the Sketch
+should print different values to the :ref:`serial monitor
+<ide-serial-monitor>` each time it is run::
+
+ long randNumber;
+
+ void setup() {
+ pinMode(0, INPUT_ANALOG);
+ randomSeed(analogRead(0));
+ }
+
+ void loop() {
+ randNumber = random(300);
+ SerialUSB.println(randNumber);
+
+ delay(50);
+ }
+
+See Also
+--------
+
+- :ref:`randomSeed() <lang-randomseed>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/randomseed.rst b/docs/source/lang/api/randomseed.rst
new file mode 100644
index 0000000..d0a15b7
--- /dev/null
+++ b/docs/source/lang/api/randomseed.rst
@@ -0,0 +1,60 @@
+.. highlight:: cpp
+
+.. _lang-randomseed:
+
+randomSeed()
+============
+
+``randomSeed()`` initializes the `pseudorandom number generator
+<http://en.wikipedia.org/wiki/Pseudorandom_number_generator>`_,
+causing it to start at an arbitrary point in its random sequence.
+This sequence, while very long, and random, is always the same.
+
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: randomSeed
+
+Discussion
+----------
+
+If it is important for a sequence of values generated by
+:ref:`random() <lang-random>` to differ, on subsequent executions of a
+sketch, use ``randomSeed()`` to initialize the random number generator
+with a fairly random input, such as :ref:`analogRead()
+<lang-analogread>` on an unconnected pin.
+
+Conversely, it can occasionally be useful to use pseudorandom
+sequences that repeat exactly. This can be accomplished by calling
+``randomSeed()`` with a fixed number, before starting the random
+sequence.
+
+Example
+-------
+
+The following sketch initializes the random seed based on an :ref:`ADC
+<adc>` reading of pin 0. If this pin is unconnected, the Sketch
+should print different values to the :ref:`serial monitor
+<ide-serial-monitor>` each time it is run::
+
+ long randNumber;
+
+ void setup() {
+ pinMode(0, INPUT_ANALOG);
+ randomSeed(analogRead(0));
+ }
+
+ void loop() {
+ randNumber = random(300);
+ SerialUSB.println(randNumber);
+
+ delay(50);
+ }
+
+See Also
+--------
+
+- :ref:`random() <lang-random>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/serial.rst b/docs/source/lang/api/serial.rst
new file mode 100644
index 0000000..ca89b31
--- /dev/null
+++ b/docs/source/lang/api/serial.rst
@@ -0,0 +1,226 @@
+.. _lang-serial:
+
+Serial Ports (``Serial1``, ``Serial2``, ``Serial3``)
+====================================================
+
+Used for communication between the Maple board and a computer or other
+devices.
+
+.. contents:: Contents
+ :local:
+
+Introduction
+------------
+
+The Maple has three serial ports (also known as a UARTs or USARTs):
+``Serial1``, ``Serial2``, and ``Serial3``. They communicate using the
+pins summarized in the following table:
+
+.. list-table::
+ :header-rows: 1
+
+ * - Serial port
+ - TX, RX, CK
+ - CTS, RTS (if present)
+
+ * - ``Serial1``
+ - 7, 8, 6
+ -
+
+ * - ``Serial2``
+ - 1, 0, 10
+ - 2, 3
+
+ * - ``Serial3``
+ - 29, 30, 31
+ - 32, 33
+
+Thus, if you use a particular serial port, you cannot also use its
+communication pins for other purposes at the same time.
+
+If you want to communicate with the Maple using the provided USB port,
+use :ref:`SerialUSB <lang-serialusb>` instead.
+
+To use them to communicate with an external TTL serial device, connect
+the TX pin to your device's RX pin, the RX to your device's TX pin,
+and the ground of your Maple to your device's ground.
+
+.. warning:: Don't connect these pins directly to an RS232 serial
+ port; they operate at +/- 12V and can damage your board.
+
+
+Library Documentation
+---------------------
+
+All of the ``Serial[1,2,3]`` objects are instances of the
+``HardwareSerial`` class, which is documented in this section. (This
+means that you can use any of these functions on any of ``Serial1``,
+``Serial2``, and ``Serial3``).
+
+.. cpp:class:: HardwareSerial
+
+ Serial port class. Predefined instances are ``Serial1``,
+ ``Serial2``, and ``Serial3``.
+
+.. cpp:function:: HardwareSerial::begin(unsigned int baud)
+
+ Set up a ``HardwareSerial`` object for communications. This method
+ must be called before attempting to use the ``HardwareSerial``
+ object (typically, you call this in your :ref:`setup()
+ <lang-setup>` function).
+
+.. cpp:function:: HardwareSerial::end()
+
+ Disables the USART associated with this object, allowing any
+ associated communication pins to be used for other purposes.
+
+.. cpp:function:: unsigned int HardwareSerial::available()
+
+ Returns the number of bytes available for reading.
+
+.. cpp:function:: unsigned char HardwareSerial::read()
+
+ Returns the next available, unread character. If there are no
+ available characters (you can check this with :cpp:func:`available
+ <HardwareSerial::available>`), the call will block until one
+ becomes available.
+
+.. cpp:function:: HardwareSerial::flush()
+
+ Removes the contents of the Serial's associated USART RX FIFO.
+ That is, clears any buffered characters, so that the next character
+ read is guaranteed to be new.
+
+.. cpp:function:: HardwareSerial::print(unsigned char b)
+
+ Print the given byte over the USART.
+
+.. cpp:function:: HardwareSerial::print(char c)
+
+ Print the given character over the USART. 7-bit clean characters
+ are typically interpreted as ASCII text.
+
+.. cpp:function:: HardwareSerial::print(const char *str)
+
+ Print the given null-terminated string over the USART.
+
+.. cpp:function:: HardwareSerial::print(int n)
+
+ Print the argument's digits over the USART, in decimal format.
+ Negative values will be prefixed with a ``'-'`` character.
+
+.. cpp:function:: HardwareSerial::print(unsigned int n)
+
+ Print the argument's digits over the USART, in decimal format.
+
+.. cpp:function:: HardwareSerial::print(long n)
+
+ Print the argument's digits over the USART, in decimal format.
+ Negative values will be prefixed with a ``'-'`` character.
+
+.. cpp:function:: HardwareSerial::print(unsigned long n)
+
+ Print the argument's digits over the USART, in decimal format.
+
+.. cpp:function:: HardwareSerial::print(long n, int base)
+
+ Print the digits of ``n`` over the USART, in base ``base`` (which
+ may be between 2 and 16). The ``base`` value 2 corresponds to
+ binary, 8 to octal, 10 to decimal, and 16 to hexadecimal. Negative
+ values will be prefixed with a ``'-'`` character.
+
+.. cpp:function:: HardwareSerial::print(double n)
+
+ Print ``n``, accurate to 2 digits after the decimal point.
+
+.. _lang-serial-println:
+
+.. cpp:function:: HardwareSerial::println(char c)
+
+ Like ``print(c)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(const char *c)
+
+ Like ``print(c)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(unsigned char b)
+
+ Like ``print(b)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(int n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(unsigned int n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(long n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(unsigned long n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(long n, int base)
+
+ Like ``print(n, b)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println(double n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: HardwareSerial::println()
+
+ Prints ``"\r\n"`` over the USART.
+
+.. cpp:function:: HardwareSerial::write(unsigned char ch)
+
+ Sends one character over the USART. This function is currently
+ blocking, although nonblocking writes are a planned future
+ extension.
+
+ This is a low-level function. One of the ``print()`` or
+ ``println()`` functions is likely to be more useful when printing
+ multiple characters, when formatting numbers for printing, etc.
+
+.. cpp:function:: HardwareSerial::write(const char* str)
+
+ Send the given null-terminated character string over the USART.
+
+ This is a low-level function. One of the ``print()`` or
+ ``println()`` functions is likely to be more useful when printing
+ multiple characters, when formatting numbers for printing, etc.
+
+.. cpp:function:: HardwareSerial::write(void *buf, unsigned int size)
+
+ Writes the first ``size`` bytes of ``buf`` over the USART. Each
+ byte is transmitted as an individual character.
+
+ This is a low-level function. One of the ``print()`` or
+ ``println()`` functions is likely to be more useful when printing
+ multiple characters, when formatting numbers for printing, etc.
+
+Arduino Compatibility Note
+--------------------------
+
+Unlike the Arduino, none of the Maple's serial ports is connected to
+the USB port on the Maple board (for that, use :ref:`SerialUSB
+<lang-serialusb>`). Thus, to use these pins to communicate with your
+personal computer, you will need an additional USB-to-serial adaptor.
+
+.. TODO LATER port these examples over
+
+.. Examples
+.. --------
+
+.. - `ASCII Table <http://arduino.cc/en/Tutorial/ASCIITable>`_
+.. - `Dimmer <http://arduino.cc/en/Tutorial/Dimmer>`_
+.. - `Graph <http://arduino.cc/en/Tutorial/Graph>`_
+.. - `Physical Pixel <http://arduino.cc/en/Tutorial/PhysicalPixel>`_
+.. - `Virtual Color Mixer <http://arduino.cc/en/Tutorial/VirtualColorMixer>`_
+.. - `Serial Call Response <http://arduino.cc/en/Tutorial/SerialCallResponse>`_
+.. - `Serial Call Response ASCII <http://arduino.cc/en/Tutorial/SerialCallResponseASCII>`_
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/serialusb.rst b/docs/source/lang/api/serialusb.rst
new file mode 100644
index 0000000..af3a7e0
--- /dev/null
+++ b/docs/source/lang/api/serialusb.rst
@@ -0,0 +1,242 @@
+.. highlight:: cpp
+
+.. _lang-serialusb:
+
+``SerialUSB``
+=============
+
+Used for communication between the Maple board and a computer.
+
+.. contents:: Contents
+ :local:
+
+Introduction
+------------
+
+In addition to three :ref:`serial ports <lang-serial>`, the Maple's
+STM32 microprocessor includes a dedicated USB peripheral. This
+peripheral is used to emulate a regular serial port for use as a
+terminal (text read/write). The emulated terminal is relatively slow
+and inefficient; it is best for transferring data at regular serial
+speeds (kilobaud).
+
+Library access to the emulated serial port is provided through the
+``SerialUSB`` object. You can mostly use ``SerialUSB`` as a drop-in
+replacement for ``Serial1``, ``Serial2``, and ``Serial3``.
+
+.. warning:: The ``SerialUSB`` functionality includes a 50 millisecond
+ timeout for writes, and does not try to detect if the USB host is
+ "really" connected, or just enumerated and initialized.
+
+ This means that if you have a number of calls to one of the
+ ``SerialUSB`` ``write()`` or ``print()`` functions in your code,
+ and you are not monitoring the emulated on a computer, your program
+ will run much, much slower than if it is being monitored or totally
+ disconnected (run off of a battery).
+
+ You can avoid this behavior by :ref:`deciphering the port status
+ using the DTR and RTS line status <lang-serialusb-safe-print>`; the
+ behavior of these control lines is platform dependent and we no
+ longer interpret them by default.
+
+Library Documentation
+---------------------
+
+The ``SerialUSB`` object is an instance of the ``USBSerial`` class,
+which is documented in this section. This means that you can use any
+of these functions by writing
+``SerialUSB.functionName(arguments...)``. For example, to print the
+message "hello, world!", you can write ``USBSerial.println("hello,
+world!")``.
+
+.. cpp:class:: USBSerial
+
+ Emulated serial-over-USB class. ``SerialUSB`` is the predefined
+ instance.
+
+.. cpp:function:: USBSerial::begin()
+
+ Set up the USB peripheral for emulated serial communication. The
+ peripheral is configured this way by default; calling this function
+ should only be necessary if you have disabled the peripheral using
+ ``SerialUSB.end()``.
+
+.. _lang-serialusb-end:
+
+.. cpp:function:: USBSerial::end()
+
+ Disables the USB peripheral.
+
+.. cpp:function:: unsigned int USBSerial::available()
+
+ Returns the number of bytes available for reading.
+
+.. _lang-serialusb-read:
+
+.. cpp:function:: unsigned char USBSerial::read()
+
+ Returns the next available, unread character. If there are no
+ available characters (you can check this with :cpp:func:`available
+ <USBSerial::available>`), the call will block until one
+ becomes available.
+
+.. cpp:function:: USBSerial::flush()
+
+ Removes the contents of the Serial's associated input buffer. That
+ is, clears any buffered characters, so that the next character read
+ is guaranteed to be new.
+
+.. cpp:function:: USBSerial::print(unsigned char b)
+
+ Print the given byte over the USB connection.
+
+.. cpp:function:: USBSerial::print(char c)
+
+ Print the given character over the USB connection. 7-bit clean characters
+ are typically interpreted as ASCII text.
+
+.. cpp:function:: USBSerial::print(const char *str)
+
+ Print the given null-terminated string over the USB connection.
+
+.. cpp:function:: USBSerial::print(int n)
+
+ Print the argument's digits over the USB connection, in decimal format.
+ Negative values will be prefixed with a ``'-'`` character.
+
+.. cpp:function:: USBSerial::print(unsigned int n)
+
+ Print the argument's digits over the USB connection, in decimal format.
+
+.. cpp:function:: USBSerial::print(long n)
+
+ Print the argument's digits over the USB connection, in decimal
+ format. Negative values will be prefixed with a ``'-'`` character.
+
+.. cpp:function:: USBSerial::print(unsigned long n)
+
+ Print the argument's digits over the USB connection, in decimal
+ format.
+
+.. cpp:function:: USBSerial::print(long n, int base)
+
+ Print the digits of ``n`` over the USB connection, in base ``base``
+ (which may be between 2 and 16). The ``base`` value 2 corresponds
+ to binary, 8 to octal, 10 to decimal, and 16 to hexadecimal.
+ Negative values will be prefixed with a ``'-'`` character.
+
+.. cpp:function:: USBSerial::print(double n)
+
+ Print ``n``, accurate to 2 digits after the decimal point.
+
+.. _lang-serialusb-println:
+
+.. cpp:function:: USBSerial::println(char c)
+
+ Like ``print(c)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(const char *c)
+
+ Like ``print(c)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(unsigned char b)
+
+ Like ``print(b)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(int n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(unsigned int n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(long n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(unsigned long n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(long n, int base)
+
+ Like ``print(n, b)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println(double n)
+
+ Like ``print(n)``, followed by ``"\r\n"``.
+
+.. cpp:function:: USBSerial::println()
+
+ Prints ``"\r\n"`` over the USB connection.
+
+.. cpp:function:: USBSerial::write(unsigned char ch)
+
+ Sends one character over the USB connection. This function is
+ currently blocking, although nonblocking writes are a planned
+ future extension.
+
+ This is a low-level function. One of the ``print()`` or
+ ``println()`` functions is likely to be more useful when printing
+ multiple characters, when formatting numbers for printing, etc.
+
+.. cpp:function:: USBSerial::write(const char* str)
+
+ Send the given null-terminated character string over the USB
+ connection.
+
+ This is a low-level function. One of the ``print()`` or
+ ``println()`` functions is likely to be more useful when printing
+ multiple characters, when formatting numbers for printing, etc.
+
+.. cpp:function:: USBSerial::write(void *buf, unsigned int size)
+
+ Writes the first ``size`` bytes of ``buf`` over the USB connection.
+ Each byte is transmitted as an individual character.
+
+ This is a low-level function. One of the ``print()`` or
+ ``println()`` functions is likely to be more useful when printing
+ multiple characters, when formatting numbers for printing, etc.
+
+Examples
+--------
+
+.. _lang-serialusb-safe-print:
+
+**Safe print**: This function should run smoothly and not block; the
+LED should blink at roughly the same speed whether being monitored,
+running from battery, or connected but not monitored. You may need to
+experiment with the DTR/RTS logic for your platform and device
+configuration. ::
+
+ #define LED_PIN 13
+
+ void setup() {
+ /* Set up the LED to blink */
+ pinMode(LED_PIN, OUTPUT);
+ }
+
+ void loop() {
+ // LED will stay off if we are disconnected;
+ // will blink quickly if USB is unplugged (battery etc)
+ if(SerialUSB.isConnected()) {
+ digitalWrite(LED_PIN, 1);
+ }
+ delay(100);
+
+ // If this logic fails to detect if bytes are going to
+ // be read by the USB host, then the println() will fully
+ // many times, causing a very slow LED blink.
+ // If the characters are printed and read, the blink will
+ // only slow a small amount when "really" connected, and fast
+ // when the virtual port is only configured.
+ if(SerialUSB.isConnected() && (SerialUSB.getDTR() || SerialUSB.getRTS())) {
+ for(int i=0; i<10; i++) {
+ SerialUSB.println(123456,BIN);
+ }
+ }
+ digitalWrite(LED_PIN, 0);
+ delay(100);
+ }
+
diff --git a/docs/source/lang/api/setup.rst b/docs/source/lang/api/setup.rst
new file mode 100644
index 0000000..837ddd6
--- /dev/null
+++ b/docs/source/lang/api/setup.rst
@@ -0,0 +1,29 @@
+.. highlight:: cpp
+
+.. _lang-setup:
+
+setup()
+=======
+
+The ``setup()`` function is called when a sketch starts. Use it to
+initialize :ref:`variables <lang-variables>`, :ref:`pin modes
+<lang-pinmode>`, start using :ref:`libraries <libraries>`, etc. The
+``setup()`` function will only run once, after each power-up or reset
+of the Maple board.
+
+Example
+-------
+
+::
+
+ int buttonPin = 38;
+
+ void setup() {
+ pinMode(buttonPin, INPUT);
+ }
+
+ void loop() {
+ // ...
+ }
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/sin.rst b/docs/source/lang/api/sin.rst
new file mode 100644
index 0000000..398b8f3
--- /dev/null
+++ b/docs/source/lang/api/sin.rst
@@ -0,0 +1,32 @@
+.. _lang-sin:
+
+sin()
+=====
+
+Calculates the `sine <http://en.wikipedia.org/wiki/Sine>`_ of an
+angle.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: sin
+
+Arduino Compatibility
+---------------------
+
+The Maple version of ``sin()`` is compatible with Arduino.
+
+Note that the Maple implementation comes from `newlib
+<http://sourceware.org/newlib/>`_\ , while Arduino's is that of
+`avr-libc <http://avr-libc.nongnu.org/>`_\ .
+
+See Also
+--------
+
+- :ref:`cos <lang-cos>`
+- :ref:`tan <lang-tan>`
+- :ref:`float <lang-float>`
+- :ref:`double <lang-double>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/sq.rst b/docs/source/lang/api/sq.rst
new file mode 100644
index 0000000..bd32648
--- /dev/null
+++ b/docs/source/lang/api/sq.rst
@@ -0,0 +1,46 @@
+.. highlight:: cpp
+
+.. _lang-sq:
+
+sq()
+====
+
+(Macro) computes the square of a number.
+
+Syntax
+------
+
+::
+
+ sq(a)
+
+Parameters
+----------
+
+**a**: the number.
+
+Returns
+-------
+
+**a** squared (**a** × **a**).
+
+Warning
+-------
+
+Because of the way ``sq()`` is implemented, avoid using other
+functions or causing side effects inside the parentheses, as it may
+lead to incorrect results::
+
+ b = sq(a++); // avoid this - yields incorrect results
+
+ b = sq(a); // use this instead -
+ a++; // keep other operations outside sq()
+
+
+Arduino Compatibility
+---------------------
+
+Maple's implementation of ``sq()`` is compatible with Arduino.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/tan.rst b/docs/source/lang/api/tan.rst
new file mode 100644
index 0000000..4bbe0db
--- /dev/null
+++ b/docs/source/lang/api/tan.rst
@@ -0,0 +1,31 @@
+.. _lang-tan:
+
+tan()
+=====
+
+Calculates the tangent of an angle.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: tan
+
+Arduino Compatibility
+---------------------
+
+The Maple version of ``tan()`` is compatible with Arduino.
+
+Note that the Maple implementation comes from `newlib
+<http://sourceware.org/newlib/>`_\ , while Arduino's is that of
+`avr-libc <http://avr-libc.nongnu.org/>`_\ .
+
+See Also
+--------
+
+
+- :ref:`sin <lang-sin>`
+- :ref:`cos <lang-cos>`
+- :ref:`float <lang-float>`
+- :ref:`double <lang-double>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/api/volatile.rst b/docs/source/lang/api/volatile.rst
new file mode 100644
index 0000000..276bb6a
--- /dev/null
+++ b/docs/source/lang/api/volatile.rst
@@ -0,0 +1,65 @@
+.. highlight:: cpp
+
+.. _lang-volatile:
+
+``volatile``
+============
+
+The ``volatile`` keyword known is a variable *qualifier*. It is
+usually used before the datatype of a variable, to modify the way in
+which the compiler treats the variable.
+
+Declaring a variable ``volatile`` is a directive to the compiler. The
+compiler is software which translates your C++ code into the machine
+code, which are the real instructions for the STM32 chip in the
+Maple. (The particular compiler we provide for use with the Maple is a
+version of :ref:`GCC <arm-gcc>`).
+
+Specifically, it directs the compiler to read the variable's value
+fresh every time it is used, rather than "backing up" the value and
+reading from its backup copy. (Compilers often "back up" a variable's
+value in RAM into a storage location called a *register*; this is done
+for efficiency).
+
+A variable should be declared ``volatile`` whenever its value can be
+changed by something beyond the control of the code section in which
+it appears, such as an :ref:`external interrupt
+<external-interrupts>`. On the Maple, the only place that this is
+likely to occur is in sections of code associated with interrupts.
+
+Example
+-------
+
+::
+
+ // toggles LED when interrupt pin changes state
+
+ int pin = 13;
+ volatile int state = LOW;
+
+ void setup() {
+ pinMode(pin, OUTPUT);
+ attachInterrupt(0, blink, CHANGE);
+ }
+
+ void loop() {
+ digitalWrite(pin, state);
+ }
+
+ void blink() {
+ if (state == HIGH) {
+ state = LOW;
+ } else {
+ // state must be HIGH
+ state = HIGH;
+ }
+ }
+
+See also
+--------
+
+- :ref:`External Interrupts <external-interrupts>`
+- :ref:`lang-attachinterrupt`
+- :ref:`lang-detachinterrupt`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/arithmetic.rst b/docs/source/lang/cpp/arithmetic.rst
new file mode 100644
index 0000000..91fe22e
--- /dev/null
+++ b/docs/source/lang/cpp/arithmetic.rst
@@ -0,0 +1,127 @@
+.. highlight:: cpp
+
+.. _lang-arithmetic:
+
+Arithmetic Operators (``+``, ``-``, ``*``, ``/``)
+=================================================
+
+The operators ``+``, ``-``, ``*``, and ``/`` respectively evaluate to
+the sum, difference, product, or quotient (respectively) of the two
+operands. The operation is conducted using the data type of the
+operands, so, for example, ``9 / 4`` gives ``2`` since 9 and 4 are
+:ref:`int variables <lang-int>`.
+
+This also means that the operation can overflow if the result is
+larger than that which can be stored in the data type (e.g. adding 1
+to an :ref:`lang-int` with the value 2,147,483,647 gives
+-2,147,483,648).
+
+.. _lang-arithmetic-typeconversion:
+
+If the operands are of different types, the "larger" type is used for
+the calculation. If one of the numbers (operands) are of the type
+**float** or of type **double**, floating point math will be used for
+the calculation.
+
+.. note:: The specifics of these rules are beyond the scope of this
+ documentation; for more information, see `The C++ Programming
+ Language <http://www2.research.att.com/~bs/3rd.html>`_\ , by Bjarne
+ Stroustroup, Appendix C, especially §§C.4-C.6, or `this WikiBooks
+ entry on C++ type conversion
+ <http://en.wikibooks.org/wiki/C%2B%2B_Programming/Programming_Languages/C%2B%2B/Code/Statements/Variables/Type_Casting#Automatic_type_conversion>`_.
+
+.. note:: For more information on how computers represent integers,
+ see the Wikipedia page on `two's complement
+ <http://en.wikipedia.org/wiki/Two's_complement>`_.
+
+.. contents:: Contents
+ :local:
+
+Examples
+--------
+
+ ::
+
+ y = y + 3;
+ x = x - 7;
+ i = j * 6;
+ r = r / 5;
+
+
+Syntax
+------
+
+ ::
+
+ result = value1 + value2;
+ result = value1 - value2;
+ result = value1 * value2;
+ result = value1 / value2;
+
+
+Parameters
+----------
+
+**value1**: any numeric variable or constant
+
+**value2**: any numeric variable or constant
+
+Programming Tips
+----------------
+
+- Know that :ref:`integer constants <lang-constants-integers>`
+ default to :ref:`int <lang-int>`, so some constant calculations
+ may overflow (e.g., 200000 * 5000000 will yield a negative result).
+
+- Choose variable sizes that are large enough to hold the largest
+ results from your calculations.
+
+- Know at what point your variable will "roll over" and also what
+ happens in the other direction e.g. (0 - 1) for unsigned arithmetic,
+ or (0 - -2,147,483,648) for signed arithmetic.
+
+- For math that requires fractions, float variables may be used, but
+ be aware of their drawbacks: large size and slow computation speeds
+ (the STM32 has no floating point hardware, so all floating point
+ calculations have to be done in software).
+
+- Use cast operator, e.g. ``(int)myFloat`` to convert one variable type
+ to another on the fly.
+
+Arduino Compatibility
+---------------------
+
+Since the STM32 processor on the Maple is a 32-bit machine, the int
+type overflows at a much higher value on Maple than on Arduino. In
+particular, on Maple, ints do not overflow (become negative) until
+they reach 2,147,483,648; on the Arduino, they overflow at 32,767.
+Because of this, programs running on Maple are much less likely to run
+into overflow issues. The following table summarizes the sizes and
+ranges of integer datatypes on the Maple (the ranges of long long
+types are approximate):
+
+.. _lang-arithmetic-int-sizes:
+
+.. csv-table::
+ :header: Datatype, Unsigned range, Signed range, Size (bytes)
+ :widths: 8, 12, 17, 8
+
+ ``char``, 0 --- 255, -128 --- 127, 1
+ ``short``, "0 --- 65,535", "-32,768 --- 32,767", 2
+ ``int``, "0 --- 4,294,967,295", "-2,147,483,648 --- 2,147,483,647", 4
+ ``long``, "0 --- 4,294,967,295", "-2,147,483,648 --- 2,147,483,647", 4
+ ``long long``, "0 --- 1.8*10\ :sup:`19`\ " (approx.), "-9.2*10\ :sup:`18` --- 9.2*10\ :sup:`18` (approx.)", 8
+
+
+See Also
+--------
+
+- The individual sizes (in bits) of various available types are
+ defined in `libmaple_types.h
+ <http://github.com/leaflabs/libmaple/blob/master/libmaple/libmaple_types.h>`_\
+ .
+
+- :ref:`sizeof <lang-sizeof>`\ ()
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/array.rst b/docs/source/lang/cpp/array.rst
new file mode 100644
index 0000000..30a818f
--- /dev/null
+++ b/docs/source/lang/cpp/array.rst
@@ -0,0 +1,123 @@
+.. highlight:: cpp
+
+.. _lang-array:
+
+Arrays
+======
+
+An array is a collection of variables that are accessed with an index
+number. Arrays in the C++ programming language, in which the Maple is
+programmed, can be complicated, but using simple arrays is relatively
+straightforward.
+
+.. contents:: Contents
+ :local:
+
+Creating (Declaring) an Array
+-----------------------------
+
+All of the methods below are valid ways to create (declare) an
+array. ::
+
+ int myInts[6];
+ int myPins[] = {2, 4, 8, 3, 6};
+ int mySensVals[6] = {2, 4, -8, 3, 2};
+ char message[6] = "hello";
+
+You can declare an array without initializing it, as with myInts. In
+the line referring to myPins, we declare an array without explicitly
+choosing a size. The compiler counts the elements and creates an
+array of the appropriate size.
+
+Finally, you can both initialize and size your array, as in
+mySensVals. Note that when declaring an array with elements of type
+char, one more element than your initialization is required, to hold
+the required `null character <http://en.wikipedia.org/wiki/Null-terminated_string>`_.
+
+
+Accessing an Array
+------------------
+
+
+.. compound::
+
+ Arrays are **zero indexed**; that is, referring to the array
+ initialization above, the first element of the array is at index 0,
+ hence ::
+
+ mySensVals[0] == 2;
+ mySensVals[1] == 4
+
+ and so forth.
+
+It also means that in an array with ten elements, index nine is the
+last element. Hence::
+
+ int myArray[10]={9,3,2,4,3,2,7,8,9,11};
+ // myArray[9] contains 11
+ // myArray[10] is invalid and contains random information (other memory address)
+
+For this reason, you should be careful in accessing arrays. Accessing
+past the end of an array (using an index number greater than your
+declared array size - 1) is reading from memory that is in use for
+other purposes. Reading from these locations is probably not going to
+do much except yield invalid data. Writing to random memory locations
+is definitely a bad idea, and can often lead to unhappy results such
+as crashes or program malfunction. This can also be a difficult bug to
+track down.
+
+Unlike Basic or Java, the C compiler does no checking to see if array
+access is within legal bounds of the array size that you have
+declared.
+
+
+To assign a value to an array
+-----------------------------
+ ::
+
+ mySensVals[0] = 10;
+
+
+To retrieve a value from an array
+---------------------------------
+
+ ::
+
+ x = mySensVals[4];
+
+
+Arrays and ``for`` Loops
+------------------------
+
+Arrays are often manipulated inside :ref:`for loops <lang-for>`, where
+the loop counter is used as the index for each array element. For
+example, to print the elements of an array over the serial port, you
+could do something like this::
+
+ int i;
+ for (i = 0; i < 5; i = i + 1) {
+ SerialUSB.println(myPins[i]);
+ }
+
+
+Example
+-------
+
+For a complete program that demonstrates the use of arrays, see the
+Arduino `Knight Rider example
+<http://www.arduino.cc/en/Tutorial/KnightRider>`_\ (which will run
+unmodified on the Maple).
+
+Arduino Compatibility
+---------------------
+
+Arrays on Maple are identical those on Arduino.
+
+See also
+--------
+
+- :ref:`Storing arrays in FLASH memory <arm-gcc-attribute-flash>`
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/assignment.rst b/docs/source/lang/cpp/assignment.rst
new file mode 100644
index 0000000..b6ad4d5
--- /dev/null
+++ b/docs/source/lang/cpp/assignment.rst
@@ -0,0 +1,70 @@
+.. highlight:: cpp
+
+.. _lang-assignment:
+
+Assignment Operator (``=``)
+===========================
+
+Stores the value to the right of the equal sign in the variable to
+the left of the equal sign.
+
+The single equal sign in the C++ programming language is called the
+assignment operator. It has a different meaning than in algebra
+class, where it indicated an equation or equality. The assignment
+operator tells the microcontroller to evaluate whatever value or
+expression is on the right side of the equal sign, and store it in
+the variable to the left of the equal sign [#fgross]_.
+
+
+
+Example
+-------
+
+::
+
+ int sensVal; // declare an integer variable named sensVal
+ senVal = analogRead(0); // store the (digitized) input voltage at analog pin 0 in SensVal
+
+
+
+Programming Tips
+----------------
+
+The variable on the left side of the assignment operator ( = sign )
+needs to be able to hold the value stored in it. If it is not large
+enough to hold a value, the value stored in the variable will be
+incorrect.
+
+Don't confuse the assignment operator [ = ] (single equal sign)
+with the comparison operator [ == ] (double equal signs), which
+evaluates whether two expressions are equal.
+
+
+Arduino Compatibility
+---------------------
+
+Assignments on the Maple are identical to those on Arduino.
+
+
+
+See Also
+--------
+
+
+- `if (comparison operators) <http://arduino.cc/en/Reference/If>`_
+- `char <http://arduino.cc/en/Reference/Char>`_
+- `int <http://arduino.cc/en/Reference/Int>`_
+- `long <http://arduino.cc/en/Reference/Long>`_
+
+
+.. rubric:: Footnotes
+
+.. [#fgross] Experienced C++ programmers know this to be an
+ oversimplification of what happens when the variable on the left
+ hand side is an object. See Richard Gillam's wonderful and scary
+ `The Anatomy of the Assignment Operator
+ <http://icu-project.org/docs/papers/cpp_report/the_anatomy_of_the_assignment_operator.html>`_
+ for more information.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/bitshift.rst b/docs/source/lang/cpp/bitshift.rst
new file mode 100644
index 0000000..e1c8de0
--- /dev/null
+++ b/docs/source/lang/cpp/bitshift.rst
@@ -0,0 +1,144 @@
+.. highlight:: cpp
+
+.. _lang-bitshift:
+
+Bit Shift Operators (``<<``, ``>>``)
+====================================
+
+(Adapted from `The Bit Math Tutorial
+<http://www.arduino.cc/playground/Code/BitMath>`_ in `The Arduino
+Playground <http://www.arduino.cc/playground/Main/HomePage>`_\ )
+
+There are two bit shift operators in C++: the left shift operator
+``<<`` and the right shift operator ``>>``. These operators cause the
+bits in the left operand to be shifted left or right by the number of
+positions specified by the right operand.
+
+More information on bitwise math can be obtained in the Wikipedia
+article on `bitwise operations
+<http://en.wikipedia.org/wiki/Bitwise_operation>`_\ , especially the
+section on shifts in `C, C++, and Java
+<http://en.wikipedia.org/wiki/Bitwise_operation#Shifts_in_C.2C_C.2B.2B.2C_C.23_and_Java>`_\ .
+
+
+Syntax
+------
+
+``some_int << number_of_bits``
+
+``some_int >> number_of_bits``
+
+
+Parameters
+----------
+
+* **some_int** An integer value or variable.
+
+* **number_of_bits** integer whose value is at most ``8 *
+ sizeof(variable)`` (so ``number_of_bits`` can be at most 32 for
+ ``int`` values, at most ``8`` for ``char`` values, etc.; the various
+ integer sizes are summarized :ref:`in this table
+ <lang-arithmetic-int-sizes>`\ ).
+
+
+
+Example:
+--------
+
+Here are some examples of bit shifting, with the binary representation of the number in comments::
+
+ int a = 5; // binary: 101
+ int b = a << 3; // binary: 101000, or 40 in decimal
+ int c = b >> 3; // binary: 101, or back to 5 like we started with
+
+
+When you left shift a value x by y bits (x << y), the leftmost y bits
+in x are lost, literally shifted out of existence. We'll do this
+example with ``char`` values (which are integers in the range 0-255,
+and take up 8 bits of memory)::
+
+ char a = 5; // binary (all 8 bits): 00000101
+ char b = a << 7; // binary: 10000000 - the first 1 in 101 was discarded
+
+
+If you are certain that none of the ones in a value are being shifted
+into oblivion, a simple way to think of the left-shift operator is
+that it multiplies the left operand by 2 raised to the right operand
+power (in math notation, ``x << y`` equals x * 2\ :sup:`y`\ , as long
+as none of the bits of x get shifted out). For example, to generate
+powers of 2, the following expressions can be employed::
+
+ 1 << 0 == 1
+ 1 << 1 == 2
+ 1 << 2 == 4
+ 1 << 3 == 8
+ ...
+ 1 << 8 == 256
+ 1 << 9 == 512
+ 1 << 10 == 1024
+ ...
+
+.. _lang-bitshift-signbit-gotcha:
+
+When you shift x right by y bits (``x >> y``), and the highest bit in
+x is a 1, the behavior depends on the exact data type of x. If x is of
+type ``int``, the highest bit is special, and determines whether x is
+negative or not; the details are too complicated to explain here, but
+they are thoroughly explained in the Wikipedia article on `two's
+complement arithmetic
+<http://en.wikipedia.org/wiki/Two%27s_complement>`_\ , which the
+system most computers use to store integers. In that case, the sign
+bit is copied into lower bits, for esoteric historical reasons::
+
+ int x = -16; // binary (all 32 bits): 11111111111111111111111111110000
+ int y = x >> 3; // binary: 11111111111111111111111111111110
+
+
+
+This behavior, called "sign extension", is often not what you
+want. You probably wish zeros to be shifted in from the left. It
+turns out that the right shift rules are different for ``unsigned
+int`` values, so you can use a type cast to suppress ones being copied
+from the left::
+
+ int x = -16; // binary: 11111111111111111111111111110000
+ int y = (unsigned int)x >> 3; // binary: 00011111111111111111111111111110
+
+
+
+If you are careful to avoid sign extension, you can use the
+right-shift operator, ``>>``, as a way to divide by powers of 2. For
+example::
+
+ int x = 1000;
+ int y = x >> 3; // integer division of 1000 by 8, causing y = 125.
+
+
+Arduino Compatibility
+---------------------
+
+Since it's part of the C++ language, bit shifting on the Maple is
+compatible with the Arduino; however, you should keep in mind that the
+Maple has bigger integer types (as in, more bits) than the Arduino.
+
+Since the STM32 is a 32-bit processor, the ``int`` type takes up 32
+bits instead of 16, like on Arduino's 16-bit microcontroller. This
+means that you can shift left, like ``x << y``, with bigger values of
+``y`` on the Maple before ones in ``x`` start to get shifted out.
+
+To calculate the number of bits of an integer type on the Maple,
+multiply its size in bytes (see :ref:`this table
+<lang-arithmetic-int-sizes>` for these) by 8, since there are 8
+bits in 1 byte. For example, a ``short`` takes up 2 bytes of memory,
+or 2 * 8 = 16 bits.
+
+See Also
+--------
+
+- :ref:`lang-bit`
+- :ref:`lang-bitread`
+- :ref:`lang-bitwrite`
+- :ref:`lang-bitclear`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/bitwisemath.rst b/docs/source/lang/cpp/bitwisemath.rst
new file mode 100644
index 0000000..28fe6bf
--- /dev/null
+++ b/docs/source/lang/cpp/bitwisemath.rst
@@ -0,0 +1,186 @@
+.. highlight:: cpp
+
+.. _lang-bitwisemath:
+
+Bitwise Operators (``&``, ``|``, ``^``, ``~``)
+==============================================
+
+The bitwise operators perform their calculations at the bit level of
+variables. They help solve a wide range of common programming
+problems.
+
+Much of the material here is adapted for Maple from an (Arduino)
+`tutorial on bitwise math
+<http://www.arduino.cc/playground/Code/BitMath>`_\ . Another great
+resource is the Wikipedia article on `bitwise operations
+<http://en.wikipedia.org/wiki/Bitwise_operation>`_\ .
+
+Below are descriptions and syntax for all of the operators.
+
+.. contents:: Contents
+ :local:
+
+.. _lang-bitwisemath-and:
+
+Bitwise AND (``&``)
+-------------------
+
+The bitwise AND operator in C++ is a single ampersand, ``&``, used
+between two other integer expressions. Bitwise AND operates on each
+bit position of the surrounding expressions independently, according
+to this rule: if both input bits are 1, the resulting output is 1,
+otherwise the output is 0. Another way of expressing this is::
+
+ 0 0 1 1 operand1
+ 0 1 0 1 operand2
+ ----------
+ 0 0 0 1 (operand1 & operand2) = result
+
+
+On the Maple, the type ``int`` is a 32-bit value, so using ``&``
+between two ``int`` expressions causes 32 simultaneous AND operations
+to occur. In a code fragment like::
+
+ int a = 92; // in binary: 00000000000000000000000001011100
+ int b = 101; // in binary: 00000000000000000000000001100101
+ int c = a & b; // result: 00000000000000000000000001000100,
+ // (or 68 in decimal).
+
+
+Each of the 32 bits in ``a`` and ``b`` are processed using bitwise
+AND, and all 32 resulting bits are stored in ``c``, resulting in the
+value 1000100 in binary, which is 68 in decimal.
+
+
+.. _lang-bitwisemath-or:
+
+Bitwise OR (``|``)
+------------------
+
+The bitwise OR operator in C++ is the vertical bar symbol, ``|``. Like
+the ``&`` operator, ``|`` operates independently on each bit in its
+two surrounding integer expressions, but what it does is
+different. The bitwise OR of two bits is 1 if either or both of the
+input bits is 1, otherwise it is 0. For example::
+
+ 0 0 1 1 operand1
+ 0 1 0 1 operand2
+ ----------
+ 0 1 1 1 (operand1 | operand2) = result
+
+Here is an example of bitwise OR used in a snippet of C++ code (using
+``char``, which takes up 8 bits of memory, instead of ``int``, which
+uses 32)::
+
+ char a = 92; // in binary: 01011100
+ char b = 101; // in binary: 01100101
+ char c = a | b; // result: 01111101, or 125 in decimal.
+
+.. _lang-bitwisemath-xor:
+
+Bitwise XOR (``^``)
+-------------------
+
+There is a somewhat unusual operator in C++ called bitwise EXCLUSIVE
+OR, also known as bitwise XOR. (In English, this is usually pronounced
+"zor" or "ex-or"). The bitwise XOR operator is written using the caret
+symbol, ``^``. This operator is very similar to the bitwise OR
+operator ``|``, except it evaluates to 0 for a given bit position when
+both of the input bits for that position are 1::
+
+ 0 0 1 1 operand1
+ 0 1 0 1 operand2
+ ----------
+ 0 1 1 0 (operand1 ^ operand2) = result
+
+
+Another way to look at bitwise XOR is that each bit in the result
+is a 1 if the input bits are different, or 0 if they are the same.
+
+Here is a simple example::
+
+ int x = 12; // binary (ignoring extra bits): 1100
+ int y = 10; // binary: 1010
+ int z = x ^ y; // binary: 0110, or decimal 6
+
+
+
+The ^ operator is often used to toggle (i.e. change from 0 to 1, or 1
+to 0) some of the bits in an integer expression. In a bitwise OR
+operation if there is a 1 in the mask bit, that bit is inverted; if
+there is a 0, the bit is not inverted and stays the same. Below is a
+program to blink digital pin 13 (the LED pin on Maple)::
+
+ // Blink Maple LED pin
+
+ int led_pin = 13;
+ int toggle = 0;
+
+ // demo for Exclusive OR
+ void setup(){
+ pinMode(led_pin, OUTPUT);
+ }
+
+ void loop(){
+ toggle = toggle ^ 1;
+ digitalWrite(led_pin, toggle);
+ delay(100);
+ }
+
+.. _lang-bitwisemath-not:
+
+Bitwise NOT (``~``)
+-------------------
+
+The bitwise NOT operator in C++ is the tilde character ``~``. Unlike
+``&`` and ``|``, the bitwise NOT operator is applied to a single
+operand to its right. Bitwise NOT changes each bit to its opposite: 0
+becomes 1, and 1 becomes 0. For example::
+
+ 0 1 operand1
+ ----
+ 1 0 ~operand1 = result
+
+Another example::
+
+ char a = 103; // binary: 01100111
+ char b = ~a; // binary: 10011000 = -104
+
+You might be surprised to see a negative number like -104 as the
+result of this operation. This is because the highest bit in an int
+variable is the so-called "sign bit". If the highest bit is 1, the
+number is interpreted as negative. This encoding of positive and
+negative numbers is referred to as *two's complement*. For more
+information, see the Wikipedia article on `two's
+complement. <http://en.wikipedia.org/wiki/Twos_complement>`_
+
+As an aside, it is interesting to note that (under two's complement
+arithmetic) for any integer ``x``, ``~x`` is the same as ``-x-1``.
+
+At times, the sign bit in a signed integer expression can cause
+some unwanted surprises.
+
+
+Uses
+----
+
+One of the most common uses of bitwise operations is to select or
+manipulate a particular bit (or bits) from an integer value, often
+called `bit masking
+<http://en.wikipedia.org/wiki/Mask_%28computing%29>`_\ . See the
+linked Wikipedia article for more information and examples.
+
+If you really want to see bit-twiddling techniques in their full
+glory, you could do much worse than to get yourself a copy of
+`Hacker's Delight <http://www.hackersdelight.org/>`_\ .
+
+
+See Also
+--------
+
+- :ref:`Boolean operations <lang-boolean>` (``&&``, ``||``)
+- :ref:`Compound bitwise operations <lang-compoundbitwise>` (``&=``,
+ ``|=``, ``^=``).
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/boolean.rst b/docs/source/lang/cpp/boolean.rst
new file mode 100644
index 0000000..8d6aa5c
--- /dev/null
+++ b/docs/source/lang/cpp/boolean.rst
@@ -0,0 +1,91 @@
+.. highlight:: cpp
+
+.. _lang-boolean:
+
+Boolean Operators
+=================
+
+These can be used inside the condition of an :ref:`if <lang-if>`
+statement. Evaluate to :ref:`true <lang-constants-true>` or
+:ref:`false <lang-constants-false>`.
+
+.. contents:: Contents
+ :local:
+
+.. _lang-boolean-and:
+
+&& (logical and)
+----------------
+
+True only if both operands are true. For example::
+
+ if (digitalRead(2) == HIGH && digitalRead(3) == HIGH) { // read two switches
+ // ...
+ }
+
+is true only if both inputs are high. Another example::
+
+ if (a >= 10 && a <= 20){} // true if a is between 10 and 20
+
+**Be careful** not to say ``10 <= a <= 20``! This won't work the way
+you want. You have to separately test whether ``a`` is at least 10
+using ``a >= 10``, then test whether ``a`` is at most 20 using ``a <=
+20``, then combine the results using ``&&``.
+
+
+.. _lang-boolean-or:
+
+\|\| (logical or)
+-----------------
+
+True if either operand is true. For example::
+
+ if (x > 0 || y > 0) {
+ // ...
+ }
+
+is true if either ``x`` or ``y`` is greater than 0.
+
+.. _lang-boolean-not:
+
+! (logical not)
+---------------
+
+True if the operand is false. For example::
+
+ if (!x) {
+ // ...
+ }
+
+is true if ``x`` is false (i.e. if ``x`` is zero).
+
+Some Advice
+-----------
+
+.. warning::
+
+ Make sure you don't mistake the boolean AND operator ``&&``
+ (double ampersand) for the :ref:`bitwise AND operator
+ <lang-bitwisemath-and>` ``&`` (single ampersand). They are
+ entirely different beasts.
+
+ Similarly, do not confuse the boolean OR operator ``||`` (double
+ pipe) with the :ref:`bitwise OR operator <lang-bitwisemath-or>`
+ ``|`` (single pipe).
+
+ The :ref:`bitwise NOT operator <lang-bitwisemath-not>` ``~``
+ (tilde) looks much different than the boolean not operator ``!``
+ (exclamation point, or "bang", as some programmers say), but you
+ still have to be sure which one you want.
+
+
+See Also
+--------
+
+- :ref:`Bitwise operators <lang-bitwisemath>` (``&``, ``|``, ``^``, ``~``)
+- :ref:`Compound bitwise operators <lang-compoundbitwise>` (``&=``,
+ ``|=``, ``^=``).
+- :ref:`if statement <lang-if>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/booleanvariables.rst b/docs/source/lang/cpp/booleanvariables.rst
new file mode 100644
index 0000000..6051b8c
--- /dev/null
+++ b/docs/source/lang/cpp/booleanvariables.rst
@@ -0,0 +1,54 @@
+.. highlight:: cpp
+
+.. _lang-booleanvariables:
+
+Booleans
+========
+
+A **boolean** holds one of two values, :ref:`true
+<lang-constants-true>` or :ref:`false <lang-constants-false>`. On a
+Maple, each boolean variable has type ``bool``.
+
+.. warning::
+
+ On an Arduino, the type ``boolean`` is also provided. While the
+ Maple also has this type for compatibility, **its use is strongly
+ discouraged**. The ``bool`` type is a standard part of C++, while
+ ``boolean`` is a non-standard extension that serves no purpose.
+
+Example
+-------
+
+::
+
+ int ledPin = 13; // LED on pin 13
+ int switchPin = 12; // momentary switch on 12, other side connected to ground
+
+ // running is a boolean variable:
+ bool running = false;
+
+ void setup() {
+ pinMode(ledPin, OUTPUT);
+ pinMode(switchPin, INPUT);
+ digitalWrite(switchPin, HIGH); // turn on pullup resistor
+ }
+
+ void loop() {
+ if (digitalRead(switchPin) == LOW) {
+ // switch is pressed - pullup keeps pin high normally
+ delay(100); // delay to debounce switch
+ running = !running; // toggle running variable
+ digitalWrite(ledPin, running) // indicate via LED
+ }
+ }
+
+See also
+--------
+
+
+- :ref:`Boolean constants <lang-constants-bool>`
+- :ref:`Boolean operators <lang-boolean>`
+- :ref:`Variables <lang-variables>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/break.rst b/docs/source/lang/cpp/break.rst
new file mode 100644
index 0000000..ce8ac17
--- /dev/null
+++ b/docs/source/lang/cpp/break.rst
@@ -0,0 +1,35 @@
+.. highlight:: cpp
+
+.. _lang-break:
+
+``break``
+=========
+
+``break`` is used to exit from a :ref:`while <lang-while>`\ ,
+:ref:`for <lang-for>`\ , or :ref:`do/while <lang-dowhile>` loop,
+bypassing the normal loop condition. It is also used to exit from a
+:ref:`switch <lang-switchcase>` statement.
+
+
+Example
+-------
+
+::
+
+ for (x = 0; x < 255; x ++)
+ {
+ digitalWrite(PWMpin, x);
+ sens = analogRead(sensorPin);
+ if (sens > threshold){ // bail out on sensor detect
+ x = 0;
+ // this line of code means that we'll immediately exit
+ // from the "for" loop:
+ break;
+ }
+ delay(50);
+ }
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/byte.rst b/docs/source/lang/cpp/byte.rst
new file mode 100644
index 0000000..45c9d5f
--- /dev/null
+++ b/docs/source/lang/cpp/byte.rst
@@ -0,0 +1,34 @@
+.. highlight:: cpp
+
+.. _lang-byte:
+
+byte
+====
+
+The ``byte`` type stores a 1-byte (8-bit) unsigned integer number,
+from 0 to 255.
+
+.. warning::
+
+ The ``byte`` type is provided for compatibility with Arduino.
+ However, it is a non-standard extension. The standard C++ type for
+ storing an 8-bit unsigned integer is ``unsigned char``; we
+ recommend using that instead. (Your code will still work on an
+ Arduino).
+
+
+Example
+-------
+
+::
+
+ byte b = 134;
+
+See Also
+--------
+
+- :ref:`byte() <lang-bytecast>` (casting a value to a byte)
+- :ref:`Variables <lang-variables>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/bytecast.rst b/docs/source/lang/cpp/bytecast.rst
new file mode 100644
index 0000000..b3f0de2
--- /dev/null
+++ b/docs/source/lang/cpp/bytecast.rst
@@ -0,0 +1,50 @@
+.. highlight:: cpp
+
+.. _lang-bytecast:
+
+byte() (cast)
+=============
+
+Converts a value to the :ref:`byte <lang-byte>` data type.
+
+.. note::
+
+ Casting to the byte type is provided for compatibility with
+ Arduino. However, the recommended Maple type for storing an 8-bit
+ unsigned integer is ``uint8``. (C and C++ programmers: ``stdint.h``
+ is also available).
+
+ In order to cast a variable ``x`` to a ``uint8``, the
+ following syntax can be used::
+
+ uint8(x);
+
+Syntax
+------
+
+``byte(x)``
+
+
+Parameters
+----------
+
+**x**: a value of any integer type
+
+
+Returns
+-------
+
+The value, converted to a ``byte``. Note, however, that if the value
+is larger than the maximum value you can store in a byte (255), then
+the results might be strange and unexpected.
+
+
+See Also
+--------
+
+- :ref:`lang-byte`
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/cc-attribution.txt b/docs/source/lang/cpp/cc-attribution.txt
new file mode 100644
index 0000000..e100140
--- /dev/null
+++ b/docs/source/lang/cpp/cc-attribution.txt
@@ -0,0 +1,9 @@
+.. Included in all this directory's files in order to satisfy the
+.. Arduino CC Attribution-ShareAlike 3.0 License
+
+.. admonition:: License and Attribution
+
+ This documentation page was adapted from the `Arduino Reference
+ Documentation <http://arduino.cc/en/Reference/HomePage>`_\ , which
+ is released under a `Creative Commons Attribution-ShareAlike 3.0
+ License <http://creativecommons.org/licenses/by-sa/3.0/>`_.
diff --git a/docs/source/lang/cpp/char.rst b/docs/source/lang/cpp/char.rst
new file mode 100644
index 0000000..b8747f3
--- /dev/null
+++ b/docs/source/lang/cpp/char.rst
@@ -0,0 +1,50 @@
+.. highlight:: cpp
+
+.. _lang-char:
+
+``char``
+========
+
+The ``char`` type stores a 1-byte character value (or integer with
+value from -128 to 127). Character literals are written in single
+quotes, like this: ``'A'`` (for multiple characters - strings - use
+double quotes: ``"ABC"``).
+
+
+Just like everything else on a computer, characters are stored as
+numbers. You can see the specific encoding in the `ASCII chart
+<http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters>`_\
+. This means that it is possible to do arithmetic on characters, in
+which the ASCII value of the character is used (e.g. ``'A' + 1`` has the
+decimal value 66, since the ASCII value of the capital letter A in
+decimal is 65). See the :ref:`Serial.println()
+<lang-serial-println>` documentation for more information about how
+characters are converted into numbers.
+
+The ``char`` datatype is a signed type, meaning that it encodes
+numbers from -128 to 127. For an unsigned type, which stores values
+from 0 to 255, just use the type ``unsigned char`` (two words).
+
+
+Example
+-------
+
+::
+
+ // the following two lines are equivalent, using the ASCII
+ // character encoding:
+ char c = 'A';
+ char c = 65;
+
+
+See also
+--------
+
+
+- :ref:`lang-int`
+- :ref:`lang-array` (a string is just an array of ``char``\ s)
+- :ref:`Serial.println() <lang-serial-println>`
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/charcast.rst b/docs/source/lang/cpp/charcast.rst
new file mode 100644
index 0000000..a480dec
--- /dev/null
+++ b/docs/source/lang/cpp/charcast.rst
@@ -0,0 +1,36 @@
+.. highlight:: cpp
+
+.. _lang-charcast:
+
+``char()`` (cast)
+=================
+
+Converts a value to the :ref:`char <lang-char>` data type.
+
+Syntax
+------
+
+``char(x)``
+
+
+Parameters
+----------
+
+**x**: a value of any type
+
+
+Returns
+-------
+
+The value, converted to a ``char``. Note, however, that if the value
+is outside the range of a ``char`` (-128 to 127), then the results
+might be strange and unexpected.
+
+
+See Also
+--------
+
+- :ref:`char <lang-char>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/comments.rst b/docs/source/lang/cpp/comments.rst
new file mode 100644
index 0000000..c5f118a
--- /dev/null
+++ b/docs/source/lang/cpp/comments.rst
@@ -0,0 +1,67 @@
+.. highlight:: cpp
+
+.. _lang-comments:
+
+Comments
+========
+
+Comments are lines in the program that are used to inform yourself or
+others about the way the program works. They are ignored by the
+compiler, and not exported to the processor, so they don't take up any
+space in RAM or Flash.
+
+One use for comments is to help you understand (or remember) how your
+program works, or to inform others how your program works. There are
+two different ways of making comments.
+
+.. _lang-comments-singleline:
+
+**Single line comment**: Anything following two slashes, ``//``, until
+the end of the line, is a comment::
+
+ x = 5; // the rest of this line is a comment
+
+.. _lang-comments-multiline:
+
+**Multi-line comment**: Anything in between a pair of ``/*`` and ``*/``
+is a comment::
+
+ /* <-- a slash-star begins a multi-line comment
+
+ all of this in the multi-line comment - you can use it to comment
+ out whole blocks of code
+
+ if (gwb == 0){ // single line comment is OK inside a multi-line comment
+ x = 3;
+ }
+
+ // don't forget the "closing" star-slash - they have to be balanced:
+ */
+
+Note that it's okay to use single-line comments within a multi-line
+comment, but you can't use multi-line comments within a multi-line
+comment. Here's an example::
+
+ /* ok, i started a multi-line comment
+
+ x = 3; /* this next star-slash ENDS the multi-line comment: */
+
+ x = 4; // this line is outside of the multi-line comment
+
+ // next line is also outside of the comment, and causes a compile error:
+ */
+
+Programming Tip
+---------------
+
+When experimenting with code, "commenting out" parts of your program
+is a convenient way to remove lines that may be buggy. This leaves
+the lines in the code, but turns them into comments, so the compiler
+just ignores them. This can be especially useful when trying to locate
+a problem, or when a program refuses to compile and the compiler error
+is cryptic or unhelpful.
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/comparison.rst b/docs/source/lang/cpp/comparison.rst
new file mode 100644
index 0000000..b24355f
--- /dev/null
+++ b/docs/source/lang/cpp/comparison.rst
@@ -0,0 +1,87 @@
+.. highlight:: cpp
+
+.. _lang-comparison:
+
+Comparison Operators (``==``, ``!=``, ``<``, ``>``, ``<=``, ``>=``)
+===================================================================
+
+The comparison operators ``==``, ``!=``, ``<``, ``>``, ``<=``, and
+``>=`` are used to compare two numbers. They are :ref:`true
+<lang-constants-true>` when the comparison is true, and :ref:`false
+<lang-constants-false>` otherwise. They are based on the symbols
+=, ≠, <, >, ≤, and ≥ from mathematics.
+
+Here are some examples, with their meaning in comments::
+
+ // "eq" is true when x is equal to y
+ bool eq = (x == y);
+
+ // "neq" is true when x is different than y
+ bool neq = (x != y);
+
+ // "lt" is true when x is less than, but NOT equal to, y
+ bool lt = (x < y);
+
+ // "gt" is true when x is greater than, but NOT equal to, y
+ bool gt = (x > y);
+
+ // "lte" is true when x is less than or equal to y
+ bool lte = (x <= y);
+
+ // "gte" is true when x is greater than or equal to y
+ bool gte = (x >= y);
+
+The parentheses are optional; they are present only for clarity. For
+example, the following two lines are the same::
+
+ bool eq = x == y;
+
+ bool eq = (x == y);
+
+Uses
+----
+
+Comparison operators, along with :ref:`boolean operators
+<lang-boolean>`, are useful inside the conditionals of :ref:`if
+<lang-if>` statements. Here's one example::
+
+ if (x < 50) {
+ // only execute these lines if x is less than 50
+ SerialUSB.println("delaying:");
+ SerialUSB.println(x);
+ delay(x);
+ }
+
+.. warning::
+ Beware of accidentally using the single equal sign (``=``) when you
+ meant to test if two numbers are equal (``==``). This is a common
+ mistake inside of ``if`` statement conditionals, e.g.::
+
+ // DON'T MAKE THIS MISTAKE
+ if (x = 10) {
+ // body
+ }
+
+ The single equal sign is the assignment operator, and sets x to 10
+ (puts the value 10 into the variable x). Instead use the double equal
+ sign (e.g. ``if (x == 10)``), which is the comparison operator, and
+ tests *whether* x is equal to 10 or not. The latter statement is only
+ true if x equals 10, but the former statement will always be true.
+
+ This is because C evaluates the statement ``if (x=10)`` as follows: 10
+ is assigned to x (remember that the single equal sign is the
+ :ref:`assignment operator <lang-assignment>`), so x now
+ contains 10. Then the 'if' conditional evaluates 10, which evaluates
+ to :ref:`true <lang-constants-true>`, since any non-zero number
+ evaluates to ``true``.
+
+ Consequently, the conditional of an ``if`` statement like ``if (x =
+ 10) {...}`` will always evaluate to ``true``, and the variable x
+ will be set to 10, which is probably not what you meant.
+
+ (This sometimes has uses, though, so just because an assignment
+ appears within a conditional doesn't mean it's automatically wrong.
+ Be careful to know what you mean.)
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/compoundarithmetic.rst b/docs/source/lang/cpp/compoundarithmetic.rst
new file mode 100644
index 0000000..420f1db
--- /dev/null
+++ b/docs/source/lang/cpp/compoundarithmetic.rst
@@ -0,0 +1,44 @@
+.. highlight:: cpp
+
+.. _lang-compoundarithmetic:
+
+Compound Arithmetic Operators (``+=`` , ``-=``, ``*=``, ``/=``)
+===============================================================
+
+These oparators perform a mathematical operation on a variable with
+another constant or variable. These operators are just a convenient
+shorthand::
+
+ x += y; // equivalent to the expression x = x + y;
+ x -= y; // equivalent to the expression x = x - y;
+ x *= y; // equivalent to the expression x = x * y;
+ x /= y; // equivalent to the expression x = x / y;
+
+Here is an example::
+
+ int x = 2;
+ int y = 10;
+
+ x += 4; // x now contains 6
+ x -= 3; // x now contains 3
+ x *= y; // x now contains 30
+ x /= 2; // x now contains 15
+ x += max(20, 6); // x now contains 35
+ x -= sq(5); // x now contains 15
+
+Parameters
+----------
+
+**x**: a numeric variable
+
+**y**: a numeric variable, number constant, or any other expression
+that evaluates to a number (e.g. call to a function that returns a
+number).
+
+See Also
+--------
+
+- :ref:`Arithmetic operators <lang-arithmetic>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/compoundbitwise.rst b/docs/source/lang/cpp/compoundbitwise.rst
new file mode 100644
index 0000000..a4bbb24
--- /dev/null
+++ b/docs/source/lang/cpp/compoundbitwise.rst
@@ -0,0 +1,231 @@
+.. highlight:: cpp
+
+.. _lang-compoundbitwise:
+
+Compound Bitwise Operators (``&=``, ``|=``, ``^=``)
+===================================================
+
+The compound bitwise operators perform their calculations at the
+bit level of variables. They are often used to clear and set
+specific bits of a variable.
+
+See the :ref:`bitwise math tutorial <lang-bitwisemath>` for more
+information on bitwise operators.
+
+.. contents:: Contents
+ :local:
+
+.. _lang-compoundbitwise-and:
+
+Compound bitwise AND (``&=``)
+-----------------------------
+
+The compound bitwise AND operator ``&=`` is often used with a variable
+and a constant to force particular bits in a variable to be zero. This
+is often referred to in programming guides as "clearing" or
+"resetting" bits. In a program, writing the line ``x &= y;`` is
+equivalent to writing ``x = x & y;``. That is, the value of ``x``
+after the line will be equal to its old value bitwise ANDed with the
+value of ``y``::
+
+ x &= y; // equivalent to x = x & y;
+
+You can use any integer variable for ``x`` (i.e., any variable of type
+``int``, ``long``, ``char``, ``byte``, etc.). You can use either an
+integer variable or any :ref:`integer value
+<lang-constants-integers>` (like ``3`` or ``0x20``) for ``y``.
+
+Before doing an example of ``&=``, let's first review the Bitwise AND
+(``&``) operator::
+
+ 0 0 1 1 operand1
+ 0 1 0 1 operand2
+ ----------
+ 0 0 0 1 (operand1 & operand2) = result
+
+As shown above, bits that are "bitwise ANDed" with 0 become 0, while
+bits that are "bitwise ANDed" with 1 are left unchanged. So, if ``b``
+is a ``byte`` variable, then ``b & B00000000`` equals zero, and ``b &
+B11111111`` equals ``b``.
+
+.. _lang-compoundbitwise-binconst:
+
+.. note:: The above uses :ref:`binary constants
+ <lang-constants-integers-bin>`\ . The numbers are still the same
+ value in other representations, they just might not be as easy to
+ understand.
+
+ Normally, in C and C++ code, :ref:`hexadecimal
+ <lang-constants-integers-hex>` or :ref:`octal
+ <lang-constants-integers-oct>` are used when we're interested in
+ an integer's bits, rather than its value as a number.
+
+ While hexadecimal and octal literals might be harder to understand
+ at first, you should really take the time to learn them. They're
+ part of C, C++, and many other programming languages, while binary
+ constants are available only for compatibility with Arduino.
+
+ Also, ``B00000000`` is shown for clarity, but zero in any number
+ format is zero.
+
+So, to clear (set to zero) bits 0 and 1 of a one-byte variable, while
+leaving the rest of the variable's bits unchanged, use the compound
+bitwise AND operator ``&=`` with the constant ``B11111100``
+(hexadecimal ``0xFC``\ )::
+
+ 1 0 1 0 1 0 1 0 variable
+ 1 1 1 1 1 1 0 0 mask
+ ----------------------
+ 1 0 1 0 1 0 0 0
+ ^^^^^^^^^^^^^^^^ ^^^^
+ unchanged cleared
+
+
+Here is the same representation with the variable's bits replaced
+with the symbol ``x``\ ::
+
+ x x x x x x x x variable
+ 1 1 1 1 1 1 0 0 mask
+ ----------------------
+ x x x x x x 0 0
+ ^^^^^^^^^^^^^^^^ ^^^^
+ unchanged cleared
+
+
+So, using a byte variable ``b``\ , if we say::
+
+ b = B10101010; // B10101010 == 0xAA
+ b &= B11111100; // B11111100 == 0xFC
+
+then we will have ::
+
+ b == B10101000; // B10101000 == 0xA8
+
+.. _lang-compoundbitwise-or:
+
+Compound bitwise OR (``|=``)
+----------------------------
+
+The compound bitwise OR operator ``|=`` is often used with a variable
+and a constant to "set" (set to 1) particular bits in a variable. In
+a program, writing the line ``x |= y;`` is equivalent to writing ``x =
+x | y;``. That is, the value of ``x`` after the line will be equal to
+its old value bitwise ORed with the value of ``y``::
+
+ x |= y; // equivalent to x = x | y;
+
+You can use any integer variable for ``x`` (i.e., any variable of type
+``int``, ``long``, ``char``, ``byte``, etc.). You can use either an
+integer variable or any integer value (like ``3`` or ``0x20``) for
+``y``. (This works the same way as :ref:`compound bitwise AND
+<lang-compoundbitwise-and>`\ , ``&=``).
+
+Before doing an example of ``|=``, let's first review the Bitwise OR
+(``|``) operator::
+
+ 0 0 1 1 operand1
+ 0 1 0 1 operand2
+ ----------
+ 0 1 1 1 (operand1 | operand2) = result
+
+Bits that are "bitwise ORed" with 0 are unchanged, while bits that are
+"bitwise ORed" with 1 are set to 1. So if ``b`` is a ``byte``
+variable, then ``b | B00000000`` equals ``b``, and ``b & B11111111``
+equals ``B11111111`` (here we've used binary constants; see the
+:ref:`note <lang-compoundbitwise-binconst>` above).
+
+So, to set bits 0 and 1 of a one-byte variable, while leaving the rest
+of the variable unchanged, use the compound bitwise OR operator
+(``|=``) with the constant ``B00000011`` (hexadecimal ``0x3``)::
+
+ 1 0 1 0 1 0 1 0 variable
+ 0 0 0 0 0 0 1 1 mask
+ ----------------------
+ 1 0 1 0 1 0 1 1
+ ^^^^^^^^^^^^^^^^ ^^^^
+ unchanged set
+
+Here is the same representation with the variable's bits replaced with
+the symbol ``x``::
+
+ x x x x x x x x variable
+ 0 0 0 0 0 0 1 1 mask
+ ----------------------
+ x x x x x x 1 1
+ ^^^^^^^^^^^^^^^^ ^^^^
+ unchanged set
+
+So, using a byte variable ``b``, if we say::
+
+ b = B10101010; // B10101010 == 0xAA
+ b |= B00000011; // B00000011 == 0x3
+
+then we will have ::
+
+ b == B10101011; // B10101011 == 0xAB
+
+.. _lang-compoundbitwise-xor:
+
+Compound bitwise XOR (``^=``)
+-----------------------------
+
+The compound bitwise XOR operator ``^=`` is used with a variable and a
+constant to "toggle" (change 0 to 1, and 1 to 0) particular bits in a
+variable. In a program, writing the line ``x ^= y;`` is equivalent to
+writing ``x = x ^ y;``. That is, the value of ``x`` after the line
+will be equal to its old value bitwise XORed with the value of ``y``::
+
+ x ^= y; // equivalent to x = x ^ y;
+
+You can use any integer variable for ``x`` (i.e., any variable of type
+``int``, ``long``, ``char``, ``byte``, etc.). You can use either an
+integer variable or any integer value (like ``3`` or ``0x20``) for
+``y``. (This works the same way as :ref:`&=
+<lang-compoundbitwise-and>` and :ref:`\|=
+<lang-compoundbitwise-or>`; in fact, these three operators all
+work the same in this way).
+
+Before doing an example of ``^=``, let's first review the Bitwise
+XOR operator, ``^``::
+
+ 0 0 1 1 operand1
+ 0 1 0 1 operand2
+ ----------
+ 0 1 1 0 (operand1 ^ operand2) = result
+
+One way to look at bitwise XOR is that each bit in the result is a 1
+if the input bits are different, or 0 if they are the same. Another
+way to think about it is that the result bit will be 1 when *exactly*
+one (no more, no less) of the input bits is 1; otherwise, it will be
+zero. This means that if you XOR a bit with 1, it will change (or
+toggle) its value, while if you XOR a bit with 0, it stays the same.
+
+So, to toggle bits 0 and 1 of a one-byte variable, while leaving the
+rest of the variable unchanged, use the compound bitwise XOR operator
+``^=`` with the constant ``B00000011`` (hexadecimal ``0x3``\ ; see
+:ref:`note <lang-compoundbitwise-binconst>` above)::
+
+ 1 0 1 0 1 0 1 0 variable
+ 0 0 0 0 0 0 1 1 mask
+ ----------------------
+ 1 0 1 0 1 0 1 1
+ ^^^^^^^^^^^^^^^^ ^^^^
+ unchanged toggled
+
+So, using a byte variable ``b``, if we say::
+
+ b = B10101010; // B10101010 == 0xAA
+ b ^= B00000011; // B00000011 == 0x3
+
+then we will have ::
+
+ b == B10101001; // B10101001 == 0xA9
+
+See Also
+--------
+
+- :ref:`Boolean operations <lang-boolean>` (``&&``, ``||``)
+- :ref:`Bitwise operators <lang-bitwisemath>` (``&``, ``|``, ``^``, ``~``)
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/const.rst b/docs/source/lang/cpp/const.rst
new file mode 100644
index 0000000..52de85f
--- /dev/null
+++ b/docs/source/lang/cpp/const.rst
@@ -0,0 +1,52 @@
+.. highlight:: cpp
+
+.. _lang-const:
+
+``const``
+=========
+
+The ``const`` keyword stands for "constant". It is a variable
+*qualifier* that modifies the behavior of the variable, making a
+variable "*read-only*". This means that the variable can be used just
+as any other variable of its type, but its value cannot be
+changed. You will get a compiler error if you try to assign a value to
+a ``const`` variable.
+
+Constants defined with the ``const`` keyword obey the same rules of
+:ref:`variable scoping <lang-scope>` that govern other
+variables. This, and the pitfalls of using :ref:`#define
+<lang-define>`, often makes using the ``const`` keyword a superior
+method for defining constants than ``#define``.
+
+Example
+-------
+
+::
+
+ // this defines a variable called "pi", which cannot be changed:
+ const float pi = 3.14;
+ float x;
+
+ // ....
+
+ x = pi * 2; // it's fine to find the value of a const variable
+
+ pi = 7; // illegal - you can't write to (modify) a constant
+
+
+**#define** or **const**
+------------------------
+
+You can use either ``const`` or ``#define`` for creating numeric or
+string constants. For :ref:`arrays <lang-array>`\ , you will need
+to use ``const``. In general, ``const`` is preferred over ``#define``
+for defining constants.
+
+See Also
+--------
+
+- :ref:`#define <lang-define>`
+- :ref:`volatile <lang-volatile>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/continue.rst b/docs/source/lang/cpp/continue.rst
new file mode 100644
index 0000000..13d1815
--- /dev/null
+++ b/docs/source/lang/cpp/continue.rst
@@ -0,0 +1,32 @@
+.. highlight:: cpp
+
+.. _lang-continue:
+
+``continue``
+============
+
+The ``continue`` keyword skips the rest of the current iteration of a
+:ref:`while <lang-while>`\ , :ref:`for <lang-for>`\ , or
+:ref:`do/while <lang-dowhile>` loop. It continues by checking the
+conditional expression of the loop, and proceeding with any subsequent
+iterations.
+
+Example
+-------
+
+::
+
+
+ for (x = 0; x < 255; x ++) {
+ if (x > 40 && x < 120) { // create jump in values
+ continue; // skips the next two lines and goes to the
+ // beginning of the loop, with the next value of x
+ }
+
+ digitalWrite(PWMpin, x);
+ delay(50);
+ }
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/curly-braces.rst b/docs/source/lang/cpp/curly-braces.rst
new file mode 100644
index 0000000..a4bd3dc
--- /dev/null
+++ b/docs/source/lang/cpp/curly-braces.rst
@@ -0,0 +1,109 @@
+.. highlight:: cpp
+
+.. _lang-curly-braces:
+
+Curly Braces (``{``, ``}``)
+===========================
+
+.. contents:: Contents
+ :local:
+
+Introduction
+------------
+
+Curly braces (also referred to as just "braces" or as "curly
+brackets") are a major part of the C and C++ programming
+languages. They are used in several different constructs, outlined
+below, and this can sometimes be confusing for beginners.
+
+An opening curly brace, ``{`` must always be followed by a closing
+curly brace ``}``. This is a condition that is often referred to as
+the braces being *balanced*. The Maple IDE (integrated development
+environment) includes a convenient feature to check the balance of
+curly braces. Just select a brace, or even click the insertion point
+immediately following a brace, and its companion will be highlighted\
+[#fbug]_\ .
+
+Beginning programmers, and programmers coming to C++ from languages
+without braces, often find using them confusing or daunting.
+
+Because the use of the curly brace is so varied, it is good
+programming practice to type the closing brace immediately after
+typing the opening brace when inserting a construct which requires
+curly braces. Then insert some blank lines between your braces and
+begin inserting statements. Your braces, and your attitude, will never
+become unbalanced.
+
+Unbalanced braces can often lead to cryptic, impenetrable compiler
+errors that can sometimes be hard to track down in a large program.
+Because of their varied usages, braces are also incredibly important
+to the syntax of a program and moving a brace one or two lines will
+usually dramatically affect the meaning of a program.
+
+The main uses of curly braces
+-----------------------------
+
+**Functions**::
+
+ // a function body needs braces around it
+ void myFunction(datatype argument) {
+ // ... function body goes in here ...
+ }
+
+**Loops** (see the :ref:`while <lang-while>`\ , :ref:`for
+<lang-for>`\ , and :ref:`do/while <lang-dowhile>` loop reference
+pages for more information)::
+
+ // you should put braces around the body of a loop:
+
+ while (boolean expression) {
+ // code inside the loop goes here
+ }
+
+ for (initialisation; termination condition; incrementing expr) {
+ // code inside the loop goes here
+ }
+
+ do {
+ // code inside the loop goes here
+ } while (boolean expression);
+
+
+**Conditional statements** (see the :ref:`if statement <lang-if>`
+reference page for more information)::
+
+ // you should put braces around the body of an "if", "else if",
+ // or "else":
+
+ if (boolean expression) {
+ // code inside the "if"
+ }
+ else if (boolean expression) {
+ // code inside the "else if"
+ }
+ else {
+ // code inside the "else"
+ }
+
+**Switch statements** (see the :ref:`switch statement
+<lang-switchcase>` reference page for more information)::
+
+ switch (var) {
+ case 1:
+ doThing1();
+ break;
+ case 2:
+ doThing2();
+ break;
+ }
+
+.. rubric:: Footnotes
+
+.. TODO remove this once IDE 0.1.0 released
+
+.. [#fbug] At present this feature is slightly buggy as the IDE will
+ often find (incorrectly) a brace in text that has been commented
+ out.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/define.rst b/docs/source/lang/cpp/define.rst
new file mode 100644
index 0000000..677390d
--- /dev/null
+++ b/docs/source/lang/cpp/define.rst
@@ -0,0 +1,56 @@
+.. highlight:: cpp
+
+.. _lang-define:
+
+``#define``
+===========
+
+``#define`` is a useful C and C++ feature that allows the programmer
+to give a name to a constant value before the program is compiled.
+The compiler will replace references to these constants with the
+defined value at compile time.
+
+This can have some unwanted side effects. In general, the :ref:`const
+<lang-const>` keyword is preferred for defining constants.
+
+
+Syntax
+------
+
+The following line would define the name ``MY_CONSTANT`` to have value
+``value``::
+
+ #define MY_CONSTANT value
+
+Note that the ``#`` is necessary. It is usually good style for the
+name to be capitalized, although this is not required.
+
+There is no semicolon after the #define statement. If you include one,
+the compiler will likely throw cryptic errors in unrelated places.
+That is, **don't do this**::
+
+ // DON'T DO THIS! THE SEMICOLON SHOULDN'T BE THERE!
+ #define NAME value;
+
+Similarly, including an equal sign after the ``#define`` line will
+also generate a cryptic compiler error further down the page. That
+is, **don't do this, either**::
+
+ // DON'T DO THIS, EITHER! THE EQUALS SIGN SHOULDN'T BE THERE!
+ #define NAME = value
+
+Example
+-------
+
+::
+
+ #define LED_PIN 13
+ // The compiler will replace any mention of LED_PIN with
+ // the value 3 at compile time.
+
+See Also
+--------
+- :ref:`const <lang-const>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/double.rst b/docs/source/lang/cpp/double.rst
new file mode 100644
index 0000000..1527778
--- /dev/null
+++ b/docs/source/lang/cpp/double.rst
@@ -0,0 +1,48 @@
+.. _lang-double:
+
+``double``
+==========
+
+Double precision floating point type. Occupies 8 bytes. On Maple, the
+``double`` type has a range of approximately -1.79769×10^308 to
+1.79769×10^308; the ``double`` type subject to the same :ref:`overflow
+issues <lang-variables-rollover>` as any numeric data type.
+
+Floating point numbers are not exact, and may yield strange results
+when compared. For example ``6.0 / 3.0`` may not equal ``2.0``. You
+should instead check that the absolute value of the difference between
+the numbers is less than some small number.
+
+Floating point math is also much slower than integer math in
+performing calculations, so should be avoided if, for example, a loop
+has to run at top speed for a critical timing function. Programmers
+often go to some lengths to convert floating point calculations to
+integer math to increase speed.
+
+For more information, see the `Wikipedia article on floating point
+math <http://en.wikipedia.org/wiki/Floating_point>`_\ .
+
+Floating-point numbers represent numbers with "decimal point", unlike
+integral types, which always represent whole numbers. Floating-point
+numbers are often used to approximate analog and continuous values
+because they have greater resolution than integers.
+
+The double implementation on the Maple uses twice the number of bytes
+as a :ref:`float <lang-float>`, with the corresponding gains in
+precision.
+
+Tip
+---
+
+Users who borrow code from other sources that includes ``double``
+variables may wish to examine the code to see if the implied range and
+precision are different from that actually achieved on the Maple.
+
+See Also
+--------
+
+- :ref:`float <lang-float>`
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/doublecast.rst b/docs/source/lang/cpp/doublecast.rst
new file mode 100644
index 0000000..511fe24
--- /dev/null
+++ b/docs/source/lang/cpp/doublecast.rst
@@ -0,0 +1,27 @@
+.. highlight:: cpp
+
+.. _lang-doublecast:
+
+``double()`` (cast)
+===================
+
+Converts a value to the :ref:`double <lang-double>` floating point
+data type. Here is an example::
+
+ int x = 2;
+ double d = double(x); // d now holds 2.0, a double value
+
+The value ``x`` can be of any type. However, if ``x`` is not a number
+(like an ``int`` or ``long``), you will get strange results.
+
+See the :ref:`double <lang-double>` reference for details about the
+precision and limitations of ``double`` values on the Maple.
+
+See Also
+--------
+
+- :ref:`double <lang-double>`
+- :ref:`float <lang-float>`
+- :ref:`float() <lang-floatcast>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/dowhile.rst b/docs/source/lang/cpp/dowhile.rst
new file mode 100644
index 0000000..fe92226
--- /dev/null
+++ b/docs/source/lang/cpp/dowhile.rst
@@ -0,0 +1,27 @@
+.. highlight:: cpp
+
+.. _lang-dowhile:
+
+``do``/``while``
+================
+
+A ``do`` loop works in the same manner as a :ref:`while
+<lang-while>` loop, with the exception that the condition is tested
+at the end of the loop, so the ``do`` loop will *always* run at least
+once.
+
+This is the basic syntax::
+
+ do {
+ // statement block
+ } while (test condition);
+
+Example::
+
+ do {
+ delay(50); // wait for sensors to stabilize
+ x = readSensors(); // check the sensors
+ } while (x < 100);
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/enum.rst b/docs/source/lang/cpp/enum.rst
new file mode 100644
index 0000000..ba82383
--- /dev/null
+++ b/docs/source/lang/cpp/enum.rst
@@ -0,0 +1,53 @@
+.. highlight:: cpp
+
+.. _lang-enum:
+
+``enum``
+========
+
+The ``enum`` keyword is used to specify an enumeration type. An
+enumeration type is a type whose values are taken from a specified,
+fixed list of constant values.
+
+Example
+-------
+
+Here's an example defining an enumeration type called ``weather``,
+which has values ``HOT``, ``COMFY``, and ``COLD``::
+
+ enum weather {HOT, COMFY, COLD};
+
+Once you've defined this type, you can create variables of type
+``weather``, in the same way you would with an :ref:`int <lang-int>`
+or a :ref:`long <lang-long>`::
+
+ // create a weather variable named theWeather, with value COMFY:
+ weather theWeather = COMFY;
+
+Enumeration types are useful within :ref:`switch statements
+<lang-switchcase>`. If you know that an argument is of an enumeration
+type, you can make ``case`` statements for all of that type's possible
+values, so you know you won't miss anything::
+
+ void describeWeather(weather currentWeather) {
+ switch(currentWeather) {
+ case HOT:
+ SerialUSB.println("it's hot out");
+ break;
+ case COMFY:
+ SerialUSB.println("it's nice today");
+ break;
+ case COLD:
+ SerialUSB.println("it's freezing!");
+ break;
+ }
+ }
+
+Such a ``switch`` statement would need no :ref:`default
+<lang-switchcase-default>`, since we know that ``currentWeather`` must
+be either ``HOT``, ``COMFY``, or ``COLD``.
+
+See Also
+--------
+
+- :ref:`lang-switchcase`
diff --git a/docs/source/lang/cpp/float.rst b/docs/source/lang/cpp/float.rst
new file mode 100644
index 0000000..6937c8c
--- /dev/null
+++ b/docs/source/lang/cpp/float.rst
@@ -0,0 +1,50 @@
+.. highlight:: cpp
+
+.. _lang-float:
+
+``float``
+=========
+
+Single-precision floating point number. Occupies 4 bytes. On Maple,
+the ``float`` type has a range of approximately -3.40282×10^38 to
+3.40282×10^38; the ``float`` type is subject to the same
+:ref:`overflow issues <lang-variables-rollover>` as any numeric data
+type.
+
+``float``\ s have only 6-7 decimal digits of precision. That means the
+total number of digits, not the number to the right of the decimal
+point. You can get more precision by using a :ref:`double
+<lang-double>` (which has a precision of about 16 decimal digits).
+
+The following example declares a ``float`` value named ``myfloat``::
+
+ float myfloat;
+
+This example declares a ``float`` value named ``sensorCalibrate``,
+with value 1.117::
+
+ float sensorCalibrate = 1.117;
+
+The general syntax for declaring a float named ``var`` with value
+``val`` is::
+
+ float var = val;
+
+Here is a more extended example involving a :ref:`float cast
+<lang-floatcast>`::
+
+ int x;
+ int y;
+ float z;
+
+ x = 1;
+ y = x / 2; // y now contains 0, ints can't hold fractions
+ z = float(x) / 2; // z now contains .5
+
+See Also
+--------
+
+- :ref:`double <lang-double>`
+- :ref:`Variables <lang-variables>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/floatcast.rst b/docs/source/lang/cpp/floatcast.rst
new file mode 100644
index 0000000..4766478
--- /dev/null
+++ b/docs/source/lang/cpp/floatcast.rst
@@ -0,0 +1,28 @@
+.. highlight:: cpp
+
+.. _lang-floatcast:
+
+``float()`` (cast)
+==================
+
+Converts a value to the :ref:`float <lang-float>` data type. Here is
+an example (see the :ref:`constants reference <lang-constants-fp>` for
+an explanation of the "2.0f")::
+
+ int x = 2;
+ float f = float(x); // f now holds 2.0f, a float value
+
+The value ``x`` can be of any type. However, if ``x`` is not a number
+(like an ``int``), you will get strange results.
+
+See the :ref:`float <lang-float>` reference for details about the
+precision and limitations of ``float`` values on the Maple.
+
+See Also
+--------
+
+- :ref:`float <lang-float>`
+- :ref:`double <lang-double>`
+- :ref:`double() <lang-doublecast>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/for.rst b/docs/source/lang/cpp/for.rst
new file mode 100644
index 0000000..71c5aca
--- /dev/null
+++ b/docs/source/lang/cpp/for.rst
@@ -0,0 +1,142 @@
+.. highlight:: cpp
+
+.. _lang-for:
+
+``for``
+=======
+
+A ``for`` loop is used to repeat a block of statements enclosed in
+curly braces. ``for`` loops are useful for performing repetitive
+operations, and are often used in combination with :ref:`arrays
+<lang-array>` to operate on collections of data or multiple
+:ref:`pins <gpio>`. A ``for`` loop is composed of two parts: first, a
+*header*, which sets up the for loop, and then a *body*, which is made
+up of lines of code enclosed in curly braces.
+
+.. contents:: Contents
+ :local:
+
+Syntax
+------
+
+There are three parts to the ``for`` loop header: an *initialization*
+expression, *loop condition* expression, and a *post-loop*
+expression. The general syntax looks like this::
+
+ for (initialization; condition; post-loop) {
+ // all of these lines inside the curly braces are part
+ // of the loop body.
+ statement 1;
+ statement 2;
+ ...
+ }
+
+(Note that there is no semicolon after the post-loop). The
+initialization happens first and exactly once, before the loop begins.
+Each time through the loop, the condition is tested. The condition is
+a :ref:`boolean <lang-boolean>` expression. If it is true, then the
+list of statements inside the curly braces are executed. Next, the
+post-loop is executed. The loop then begins again by evaluating the
+condition again, entering the loop body if it is true. This proceeds
+until the condition becomes false.
+
+Examples
+--------
+
+Here's an example::
+
+ // Dim an LED using a PWM pin
+ int pwmPin = 9; // LED in series with 470 ohm resistor on pin 9
+
+ void setup() {
+ pinMode(pwmPin, PWM);
+ }
+
+ void loop() {
+ for (int i=0; i <= 65535; i++) {
+ pwmWrite(pwmPin, i);
+ delay(1);
+ }
+ }
+
+There is a ``for`` loop In the :ref:`loop() <lang-loop>` function of
+the above example. This loop starts by declaring an ``int`` variable
+named ``i``, whose value starts out at zero. The loop proceeds by
+checking if ``i`` is less than or equal to 65535. Since ``i`` is
+zero, this is true, and so the calls to :ref:`pwmWrite()
+<lang-pwmwrite>` and :ref:`delay() <lang-delay>` happen next. At this
+point, the post-loop expression ``i++`` is evaluated, which
+:ref:`increments <lang-increment>` ``i``, so that ``i`` becomes one.
+That concludes the first time through the loop. Each "time through
+the loop" is referred to as an *iteration*.
+
+The loop then jumps back to the beginning, checking the condition as
+the beginning of its second iteration (initialization is skipped,
+since this only happens once, before the first iteration). One is
+less than 65535, so the loop statements are executed again. This
+proceeds over and over until the iteration when ``i`` finally
+reaches 65536. At that point, the condition is no longer true, so the
+loop stops executing, and the ``loop()`` function returns.
+
+Here's another example, using a ``for`` loop to brighten and fade an
+LED (see the :ref:`pwmWrite() <lang-pwmwrite>` reference for more
+information)::
+
+ int pwmPin = 9; // hook up the LED to pin 9
+ void loop() {
+ int x = 1;
+ for (int i = 0; i >= 0; i += x) {
+ analogWrite(pwmPin, i); // controls the brightness of the LED
+ if (i == 65535) {
+ x = -1; // switch direction, so i starts decreasing
+ }
+ delay(1);
+ }
+ }
+
+Coding Tips
+-----------
+
+The C ``for`` loop is more flexible than ``for`` loops found in some
+other computer languages, including BASIC. Any or all of the three
+header elements may be left blank, although the semicolons are
+required. Also the statements for initialization, condition, and
+post-loop can be any valid C statements, and use any C datatypes,
+including :ref:`floating point numbers <lang-double>`. These types
+of unusual ``for`` loops sometimes provide solutions to less-common
+programming problems.
+
+For example, using a multiplication in the post-loop line will
+generate a `geometric progression
+<http://en.wikipedia.org/wiki/Geometric_progression>`_::
+
+ for(int x = 1; x <= 100; x = x * 2) {
+ SerialUSB.println(x);
+ }
+
+
+This loop prints out the numbers 1, 2, 4, 8, ..., 64. Check
+your understanding of ``for`` loops by answering the following two
+questions (answers are in footnote [#fanswers]_\ ):
+
+1. How many iterations occur before the loop finishes?
+
+2. Why does it stop at 64?
+
+See also
+--------
+
+- :ref:`while <lang-while>` loops
+- :ref:`do <lang-dowhile>` loops
+
+.. rubric:: Footnotes
+
+.. [#fanswers]
+ 1. Seven.
+
+ 2. After the seventh iteration, the post-loop causes ``x`` to
+ equal 128. This is larger than 100, so the loop condition is
+ false, and the loop stops.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/goto.rst b/docs/source/lang/cpp/goto.rst
new file mode 100644
index 0000000..ff2f248
--- /dev/null
+++ b/docs/source/lang/cpp/goto.rst
@@ -0,0 +1,130 @@
+.. highlight:: cpp
+
+.. _lang-goto:
+
+Labels and ``goto``
+===================
+
+A *label* gives a name to a line of code within a function. You can
+label a line by writing a name for it, then a colon (``:``), before
+the line starts. The ``goto`` keyword allows program flow to transfer
+to a labeled line from anywhere within the same function.
+
+.. warning:: The use of ``goto`` is discouraged in C and C++
+ programming. It is *never necessary* to use ``goto`` to write a
+ program.
+
+ Unless you know what you're doing, using ``goto`` tends to
+ encourage code which is harder to debug and understand than
+ programs without ``goto`` that do the same thing. That said,
+ however, it's sometimes useful; :ref:`see below <goto-when-to-use>`
+ for a concrete example.
+
+Using Labels and goto
+---------------------
+
+Labels and ``goto`` are probably best explained through example.
+Let's start with an example of how to label lines. The first line
+(``int x = analogRead(some_pin);``) in the :ref:`loop <lang-loop>`
+function below has label ``readpin``. The third line (``delay(x);``)
+has label ``startdelay``. The second line (``SerialUSB.println(x);``)
+does not have a label::
+
+ void loop() {
+ readpin:
+ int x = analogRead(some_pin);
+ SerialUSB.println(x); // for debugging
+ startdelay:
+ delay(x);
+ // ... more code ...
+ }
+
+Anything which can be a :ref:`variable <lang-variables>` name can
+be a label.
+
+Let's say that we wanted to print ``x`` only if it was very large, say
+at least 2000. We might want to do this just so anybody watching on a
+:ref:`serial monitor <ide-serial-monitor>` would know they were in for
+a longer wait than usual. We can accomplish this through the use of a
+``goto`` statement that skips the printing if ``x`` is less than
+2000::
+
+ void loop() {
+ readpin:
+ int x = analogRead(some_pin);
+ if (x < 2000) {
+ goto startdelay;
+ }
+ SerialUSB.println(x); // for debugging
+ startdelay:
+ delay(x);
+ // ... more code ...
+ }
+
+In this modified program, whenever ``x`` is less than 2000, the body
+of the :ref:`if <lang-if>` statement in the second line is
+executed. The ``goto`` statement inside the ``if`` body skips
+straight to the line labeled ``startdelay``, passing over the line
+doing the printing.
+
+A ``goto`` does not have to "move forwards"; it can go "backwards",
+too. For example, the following program prints "5" forever (why?)::
+
+ void loop() {
+ printfive:
+ SerialUSB.println(5);
+ goto printfive;
+ SerialUSB.println(6);
+ }
+
+.. _goto-when-to-use:
+
+When to Use goto
+----------------
+
+As mentioned above, use of ``goto`` is `generally discouraged
+<http://en.wikipedia.org/wiki/Goto#Criticism_and_decline>`_. However,
+when used with care, ``goto`` can simplify certain programs. One
+important use case for ``goto`` is breaking out of deeply nested
+:ref:`for <lang-for>` loops or :ref:`if <lang-if>` logic blocks.
+Here's an example::
+
+ for(int r = 0; r < 255; r++) {
+ for(int g = 255; g > -1; g--) {
+ for(int b = 0; b < 255; b++) {
+ if (analogRead(0) > 250) {
+ goto bailout;
+ }
+ // more statements ...
+ }
+ // innermost loop ends here
+ }
+ }
+ bailout:
+ // more code here
+
+In the above example, whenever the :ref:`analog reading
+<lang-analogread>` on pin 0 was greater than 250, the program would
+jump to the line labeled ``bailout``, exiting all three loops at once.
+
+While there is already a :ref:`break <lang-break>` keyword for
+breaking out of a loop, it will only break out of the *innermost*
+loop. So, if instead of saying "``goto bailout;``", there was a
+"``break;``" instead, the program would only exit from the loop with
+header "``for(int b = 0; b < 255; b++)``". The program would continue
+at the line which reads "``// innermost loop ends here``", which is
+clearly undesirable if you wanted to leave all three loops at once.
+
+More examples of when ``goto`` is a good choice are given in Donald
+Knuth's paper, "Structured Programming with go to Statements"; see
+below for a link.
+
+See Also
+--------
+
+- Dijkstra, Edsger W. `Go To Statement Considered Harmful <http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.92.4846&rep=rep1&type=pdf>`_ (PDF)
+
+- Knuth, Donald. `Structured Programming with go to Statements <http://pplab.snu.ac.kr/courses/adv_pl05/papers/p261-knuth.pdf>`_ (PDF)
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/if.rst b/docs/source/lang/cpp/if.rst
new file mode 100644
index 0000000..bef89e2
--- /dev/null
+++ b/docs/source/lang/cpp/if.rst
@@ -0,0 +1,121 @@
+.. highlight:: cpp
+
+.. _lang-if:
+
+``if``/``else``
+===============
+
+An ``if`` statement is used to execute code when certain conditions
+are met. The general syntax for an ``if`` statement is::
+
+ if (condition) {
+ body
+ }
+
+An ``if`` statement first tests whether its *condition* is true (such
+as an input being above a certain number). If the condition is true,
+the ``if`` statement executes its *body*, which is made up of lines of
+code inside :ref:`curly braces <lang-curly-braces>`. If the condition
+is false, the body is not executed. Here's a more concrete example::
+
+ if (someVariable > 50) {
+ // do something here
+ }
+
+The program tests to see if ``someVariable`` is greater than 50. If it
+is, the program executes every line in the curly braces (which in the
+above example does nothing, since the body is just the :ref:`comment
+<lang-comments>` line "``// do something here``").
+
+Put another way, if the statement in parentheses is true, the
+statements inside the braces are run. If not, the program skips over
+the code.
+
+An ``if`` statement's condition (which is inside the parentheses after
+``if``) often uses one or more :ref:`boolean <lang-boolean>` or
+:ref:`comparison <lang-comparison>` operators.
+
+Writing the if Body
+-------------------
+
+The brackets may be omitted after an ``if`` statement's
+conditional. If this is done, the next line (which ends in a
+semicolon) becomes the only line in the body. The following three
+``if`` statements all do the same thing::
+
+ if (x > 120) digitalWrite(ledPin, HIGH);
+
+ if (x > 120)
+ digitalWrite(ledPin, HIGH);
+
+ if (x > 120) {
+ digitalWrite(ledPin, HIGH);
+ }
+
+However, the following two examples are different::
+
+ // example 1: two lines of code in the if body
+ if (x > 120) {
+ digitalWrite(ledPin1, HIGH);
+ digitalWrite(ledPin2, HIGH);
+ }
+
+ // example 2: one line of code in the if body, and
+ // another line of code after the if statement
+ if (x > 120)
+ digitalWrite(ledPin1, HIGH); // this is in the if body
+ digitalWrite(ledPin2, HIGH); // this is NOT in the if body
+
+In the first example, since the body is enclosed in curly braces, both
+lines are included. In the second example, since the curly braces are
+missing, only the first line is in the ``if`` body.
+
+``else``
+--------
+
+``if``/\ ``else`` allows greater control over the flow of code than
+the basic :ref:`if <lang-if>` statement, by allowing multiple tests to
+be grouped together. For example, an :ref:`analog input
+<lang-analogread>` could be tested, with one action taken if the input
+was less than 500, and another action taken if the input was 500 or
+greater. The code would look like this::
+
+ if (pinFiveInput < 500) {
+ // action A
+ } else {
+ // action B
+ }
+
+``else`` can precede another ``if`` test, so that multiple, mutually
+exclusive tests can be run at the same time.
+
+Each test will proceed to the next one until a true test is
+encountered. When a true test is found, its associated block of code
+is run, and the program then skips to the line following the entire
+if/else construction. If no test proves to be true, the default
+``else`` block is executed, if one is present, and sets the default
+behavior.
+
+Note that an ``else if`` block may be used with or without a
+terminating ``else`` block, and vice-versa. An unlimited number of
+such ``else if`` branches is allowed. Here is a code example::
+
+ if (pinFiveInput < 500) {
+ // do Thing A
+ } else if (pinFiveInput >= 1000) {
+ // do Thing B
+ } else {
+ // do Thing C
+ }
+
+Another way to express branching, mutually exclusive tests, is with a
+:ref:`switch/case <lang-switchcase>` statement.
+
+
+See Also
+--------
+
+- :ref:`boolean operators <lang-boolean>`
+- :ref:`comparison operators <lang-comparison>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/include.rst b/docs/source/lang/cpp/include.rst
new file mode 100644
index 0000000..74fe7af
--- /dev/null
+++ b/docs/source/lang/cpp/include.rst
@@ -0,0 +1,72 @@
+.. highlight:: cpp
+
+.. _lang-include:
+
+``#include``
+============
+
+``#include`` is used to include outside libraries in your sketch.
+This gives the programmer access to a large group of standard C
+libraries (groups of pre-made functions and data types), and also
+libraries written especially for Maple.
+
+Example
+-------
+
+This example (from the `Arduino LiquidCrystal Tutorial
+<http://arduino.cc/en/Tutorial/LiquidCrystal>`_) includes a library
+that is used to control :ref:`LCD displays
+<libraries-liquid-crystal>`::
+
+ // include the library code:
+ #include <LiquidCrystal.h>
+
+ // initialize the library with the numbers of the interface pins
+ LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+ void setup() {
+ // set up the LCD's number of columns and rows:
+ lcd.begin(16, 2);
+ // Print a message to the LCD.
+ lcd.print("hello, world!");
+ }
+
+ void loop() {
+ // set the cursor to column 0, line 1
+ // (note: line 1 is the second row, since counting begins with 0):
+ lcd.setCursor(0, 1);
+ // print the number of seconds since reset:
+ lcd.print(millis()/1000);
+ }
+
+Note that a ``#include`` line, like :ref:`#define <lang-define>`,
+has **no semicolon**. The compiler will print strange error messages
+if you add one.
+
+C Standard Library
+------------------
+
+The standard C library that comes with Maple is called `newlib
+<http://sourceware.org/newlib/>`_. Its main sources of documentation
+are its `main reference <http://sourceware.org/newlib/libc.html>`_
+page and its `math functions
+<http://sourceware.org/newlib/libm.html>`_ reference page. Here's an
+example that imports the math.h library in order to take the `cube
+root <http://en.wikipedia.org/wiki/Cube_root>`_ of a number::
+
+ #include <math.h>
+
+ void setup() {
+ // no setup necessary
+ }
+
+ void loop() {
+ // "cbrt" stands for "cube root"
+ double cubeRootOf3 = cbrt(3.0);
+ // prints a number that is approximately the cube root of 3:
+ SerialUSB.println(cubeRootOf3);
+ }
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/increment.rst b/docs/source/lang/cpp/increment.rst
new file mode 100644
index 0000000..6dffa80
--- /dev/null
+++ b/docs/source/lang/cpp/increment.rst
@@ -0,0 +1,37 @@
+.. highlight:: cpp
+
+.. _lang-increment:
+
+Increment and Decrement Operators (``++``, ``--``)
+==================================================
+
+These operators increment (add one to) or decrement (subtract one
+from) a variable. If they come before the variable, they return its
+new value; otherwise, they return its old value.
+
+Some quick examples::
+
+ x++; // adds one to x, and returns the old value of x
+ ++x; // adds one to x, and returns the new value of x
+
+ x--; // decrement x by one and returns the old value of x
+ --x; // decrement x by one and returns the new value of x
+
+A more extended example::
+
+ x = 2;
+ y = ++x; // x now contains 3, y contains 3
+ y = x--; // x contains 2 again, y still contains 3
+
+.. warning:: Be careful! You cannot put a space in between the two
+ ``+`` or ``-`` signs. This example is broken::
+
+ // this line won't compile (notice the extra space):
+ int y = x+ +;
+
+See Also
+--------
+
+- :ref:`lang-compoundarithmetic`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/int.rst b/docs/source/lang/cpp/int.rst
new file mode 100644
index 0000000..ca75f75
--- /dev/null
+++ b/docs/source/lang/cpp/int.rst
@@ -0,0 +1,64 @@
+.. highlight:: cpp
+
+.. _lang-int:
+
+``int``
+=======
+
+The ``int`` data type represents integers. Integers are your primary
+data type for number storage, and store a 4 byte value. This yields a
+range of -2,147,483,648 to 2,147,483,647 (minimum value of -2^31 and a
+maximum value of (2^31) - 1; that's about negative 2 billion to
+positive 2 billion).
+
+An ``int`` stores a negative number with a technique called `two's
+complement math
+<http://en.wikipedia.org/wiki/Two%27s_complement#Explanation>`_\ .
+The highest bit in an ``int``, sometimes refered to as the "sign" bit,
+flags the number as a negative number. (See the linked article on
+two's complement for more information).
+
+The Maple takes care of dealing with negative numbers for you, so that
+arithmetic operations work mostly as you'd expect. There can be an
+:ref:`unexpected complication <lang-bitshift-signbit-gotcha>` in
+dealing with the :ref:`bitshift right operator (>>)
+<lang-bitshift>`, however.
+
+Here is an example of declaring an ``int`` variable named ``ledPin``,
+then giving it value 13::
+
+ int ledPin = 13;
+
+The general syntax for declaring an ``int`` variable named ``var``,
+then giving it value ``val``, looks like::
+
+ int var = val;
+
+.. _lang-int-overflow:
+
+Integer Overflow
+----------------
+
+When ``int`` variables leave the range specified above, they
+:ref:`roll over <lang-variables-rollover>` in the other direction.
+Here are some examples::
+
+ int x;
+ x = -2,147,483,648;
+ x--; // x now contains 2,147,483,647; rolled over "left to right"
+
+ x = 2,147,483,647;
+ x++; // x now contains -2,147,483,648; rolled over "right to left"
+
+See Also
+--------
+
+- :ref:`unsigned int <lang-unsignedint>`
+- :ref:`char <lang-char>`
+- :ref:`unsigned char <lang-unsignedchar>`
+- :ref:`long <lang-long>`
+- :ref:`unsigned long <lang-unsignedlong>`
+- :ref:`Integer Constants <lang-constants-integers>`
+- :ref:`Variables <lang-variables>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/intcast.rst b/docs/source/lang/cpp/intcast.rst
new file mode 100644
index 0000000..386fe14
--- /dev/null
+++ b/docs/source/lang/cpp/intcast.rst
@@ -0,0 +1,29 @@
+.. highlight:: cpp
+
+.. _lang-intcast:
+
+``int()`` (cast)
+================
+
+Converts a value to the :ref:`int <lang-int>` data type. Here is
+an example::
+
+ double d = 2.5;
+ int i = int(d); // i holds "2", an int value
+
+The value inside of the parentheses (``int(...)``) can be of any type.
+However, if it is not a numeric type (like ``double``, ``char``,
+etc.), you will get strange results.
+
+See the :ref:`int <lang-int>` reference for details about the
+precision and limitations of ``int`` variables on the Maple.
+
+See Also
+--------
+
+- :ref:`int <lang-int>`
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/keywords.rst b/docs/source/lang/cpp/keywords.rst
new file mode 100644
index 0000000..e4ebe99
--- /dev/null
+++ b/docs/source/lang/cpp/keywords.rst
@@ -0,0 +1,205 @@
+.. _lang-keywords:
+
+Keywords
+========
+
+This page lists all of the C++ keywords, and either links to a
+reference page explaining their use, or provides a brief description.
+
+List of Keywords
+----------------
+
+The C++ keywords are:
+
+``and``, ``and_eq``, ``asm``, ``auto``, ``bitand``, ``bitor``,
+``bool``, ``break``, ``case``, ``catch``, ``char``, ``class``,
+``compl``, ``const``, ``const_cast``, ``continue``, ``default``,
+``delete``, ``do``, ``double``, ``dynamic_cast``, ``else``, ``enum``,
+``explicit``, ``export``, ``extern``, ``false``, ``float``, ``for``,
+``friend``, ``goto``, ``if``, ``inline``, ``int``, ``long``,
+``mutable``, ``namespace``, ``new``, ``not``, ``not_eq``,
+``operator``, ``or``, ``or_eq``, ``private``, ``protected``,
+``public``, ``register``, ``reinterpret_cast``, ``return``, ``short``,
+``signed``, ``sizeof``, ``static``, ``static_cast``, ``struct``,
+``switch``, ``template``, ``this``, ``throw``, ``true``, ``try``,
+``typedef``, ``typeid``, ``typename``, ``union``, ``unsigned``,
+``using``, ``virtual``, ``void``, ``volatile``, ``wchar_t``,
+``while``, ``xor``, ``xor_eq``
+
+Boolean Operator Synonyms
+-------------------------
+
+- ``and`` is a synonym for :ref:`&& <lang-boolean-and>`.
+- ``not`` is a synonym for :ref:`\! <lang-boolean-not>`.
+- ``not_eq`` is a synonym for :ref:`\!= <lang-comparison>`.
+- ``or`` is a synonym for :ref:`|| <lang-boolean-or>`.
+
+Bitwise Operator Synonyms
+-------------------------
+
+- ``and_eq`` is a synonym for :ref:`&= <lang-compoundbitwise-and>`.
+- ``bitand`` is a synonym for (bitwise) :ref:`& <lang-bitwisemath-and>`.
+- ``bitor`` is a synonym for :ref:`\| <lang-bitwisemath-or>`.
+- ``compl`` is a synonym for :ref:`~ <lang-bitwisemath-not>`.
+- ``or_eq`` is a synonym for :ref:`|= <lang-compoundbitwise-or>`.
+- ``xor`` is a synonym for :ref:`^ <lang-bitwisemath-xor>`.
+- ``xor_eq`` is a synonym for :ref:`^= <lang-compoundbitwise-xor>`.
+
+Constants
+---------
+
+- ``true`` and ``false`` are the :ref:`boolean constants
+ <lang-booleanvariables>`.
+
+Control Flow
+------------
+
+- ``break`` can exit out of a :ref:`switch statement
+ <lang-switchcase>` or a :ref:`for <lang-for>`, :ref:`do
+ <lang-dowhile>`, or :ref:`while <lang-while>` loop.
+
+- ``case`` defines alternatives in a :ref:`switch statement <lang-switchcase>`.
+
+- ``continue`` will move control flow to the next iteration of the
+ enclosing :ref:`for <lang-for>`, :ref:`do <lang-dowhile>`, or
+ :ref:`while <lang-while>` loop.
+
+- ``default`` defines the default alternative in a :ref:`switch
+ statement <lang-switchcase>`.
+
+- ``do`` introduces a :ref:`do <lang-dowhile>` loop.
+
+- ``else`` is used in :ref:`if statements <lang-if>`.
+
+- ``for`` introduces a :ref:`for <lang-for>` loop.
+
+- ``goto`` :ref:`jumps <lang-goto>` to a label.
+
+- ``if`` introduces an :ref:`if statement <lang-if>`.
+
+- ``return`` :ref:`transfers flow to a function's caller <lang-return>`.
+
+- ``switch`` introduces a :ref:`switch statement <lang-switchcase>`.
+
+- ``while`` introduces a :ref:`while <lang-while>` loop.
+
+Types
+-----
+
+The following keywords are used for built-in types.
+
+- :ref:`bool <lang-booleanvariables>`
+- :ref:`lang-char`
+- :ref:`lang-double`
+- :ref:`lang-float`
+- :ref:`lang-int`
+- :ref:`lang-long`
+- :ref:`short <lang-numeric-types-integral>`
+- :ref:`void <lang-void>` (not really a type, but used in the absence
+ of one)
+
+The following keywords are used to introduce new types.
+
+- :ref:`enum <lang-enum>`
+
+Qualifiers
+----------
+
+- :ref:`static <lang-static>` can be used to declare persistent local
+ variables; it has other uses not documented here.
+
+- ``unsigned`` is used to specify an unsigned integral type.
+ Examples: :ref:`lang-unsignedint`, :ref:`lang-unsignedchar`,
+ :ref:`lang-unsignedlong`.
+
+- :ref:`volatile <lang-volatile>` is useful when declaring variables
+ that may be modified by external interrupts.
+
+- :ref:`const <lang-const>` is used to define constants.
+
+Other
+-----
+
+These keywords are not described in the Maple documentation. For more
+information, consult a C++ reference.
+
+- ``asm`` is used to insert literal assembly language.
+
+- ``auto`` is used to declare that a variable has automatic storage.
+
+- ``catch`` is used in exception handling. Note that the default
+ flags we pass to :ref:`GCC <arm-gcc>` include ``-fno-exceptions``.
+
+- ``class`` is used to define classes.
+
+- ``const_cast`` is used in typecasting.
+
+- ``delete`` is used to free ``new``\ -allocated storage. Note that
+ dynamic memory allocation is not available by default on the Maple,
+ so you'll have to bring your own ``new`` and ``delete`` if you want
+ this.
+
+- ``dynamic_cast`` is used in typecasting.
+
+- ``explicit`` is used to declare constructors that can be called only
+ explicitly.
+
+- ``export`` declares a template definition accessible to other
+ compilation units.
+
+- ``extern`` can mark a declaration as a declaration and not a
+ definition, and also grant external linkage to a ``const`` or
+ ``typedef``.
+
+- ``friend`` is used to declare that certain functions have access to
+ a class's private variables.
+
+- ``inline`` is a compiler hint to inline a function.
+
+- ``mutable`` specifies that a member can be updated, even when a
+ member of a ``const`` object.
+
+- ``namespace`` declares a new namespace.
+
+- ``new`` dynamically allocates space for a value. Note that dynamic
+ memory allocation is not available by default on the Maple, so
+ you'll have to bring your own ``new`` and ``delete`` if you want
+ this.
+
+- ``operator`` is used to define type-specific operator overrides.
+
+- ``private`` declares a private class member.
+
+- ``protected`` declares a protected class member.
+
+- ``public`` declares a public class member.
+
+- ``register`` is a compiler hint to store a variable in a register.
+
+- ``reinterpret_cast`` is used in typecasting.
+
+- ``signed`` is the opposite of ``unsigned``.
+
+- ``static_cast`` is used in typecasting.
+
+- ``struct`` declares a new struct.
+
+- ``template`` introduces a template class, function, etc.
+
+- ``this`` is a pointer to the receiver object.
+
+- ``throw`` is used in exception handling. Note that the default
+ flags we pass to :ref:`GCC <arm-gcc>` include ``-fno-exceptions``.
+
+- ``try`` is used in exception handling. Note that the default
+ flags we pass to :ref:`GCC <arm-gcc>` include ``-fno-exceptions``.
+
+- ``typedef`` defines a type synonym.
+
+- ``union`` defines an untagged union.
+
+- ``using`` is a directive related to namespaces.
+
+- ``virtual`` declares a method which may be overridden.
+
+- ``wchar_t`` is the wide character type.
diff --git a/docs/source/lang/cpp/long.rst b/docs/source/lang/cpp/long.rst
new file mode 100644
index 0000000..d8498c0
--- /dev/null
+++ b/docs/source/lang/cpp/long.rst
@@ -0,0 +1,52 @@
+.. highlight:: cpp
+
+.. _lang-long:
+
+``long``
+========
+
+The ``long`` data type stores extended size integer values. You can
+use a ``long`` when your values are too large to fit into an :ref:`int
+<lang-int>`. A ``long`` occupies 8 bytes of memory. This yields a
+range of approximately -9.2×10^18 to 9.2×10^18 (that's 9.2 billion
+billion, or about 92 million times the number of stars in the Milky
+Way galaxy). The exact range of a ``long`` on the Maple is from
+-9,223,372,036,854,775,808 to 9,223,372,036,854,775,807, or -2^63 to
+(2^63-1). A ``long`` it is subject to the same :ref:`overflow issues
+<lang-variables-rollover>` as any numeric data type.
+
+Here's an example of declaring a long (see :ref:`integer constants
+<lang-constants-integers-u-l>` for an explanation of the "L" at the end of the
+number)::
+
+ // Speed of light in nanometers per second (approximate).
+ long c = 299792458000000000L;
+
+The general syntax for declaring an ``long`` variable named ``var``,
+then giving it value ``val``, looks like::
+
+ long var = val;
+
+This is identical to the ``int`` syntax, with ``long`` replacing
+``int``.
+
+Note that ``long`` values will still :ref:`overflow
+<lang-int-overflow>`, just like ``int`` values, but their much
+larger range makes this less likely to happen.
+
+The downside to using a ``long`` instead of an ``int`` (besides the
+extra storage) is that :ref:`arithmetic <lang-arithmetic>` operations
+on ``long``\ s will take slightly longer than on ``int``\ s.
+
+See Also
+--------
+
+- :ref:`char <lang-char>`
+- :ref:`unsigned char <lang-unsignedchar>`
+- :ref:`int <lang-int>`
+- :ref:`unsigned int <lang-unsignedint>`
+- :ref:`unsigned long <lang-unsignedlong>`
+- :ref:`Integer Constants <lang-constants-integers>`
+- :ref:`Variables <lang-variables>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/longcast.rst b/docs/source/lang/cpp/longcast.rst
new file mode 100644
index 0000000..2b92345
--- /dev/null
+++ b/docs/source/lang/cpp/longcast.rst
@@ -0,0 +1,27 @@
+.. highlight:: cpp
+
+.. _lang-longcast:
+
+``long()`` (cast)
+=================
+
+Converts a value to the :ref:`long <lang-long>` data type. Here is
+an example::
+
+ double d = 2.5;
+ long i = long(d); // i holds "2L", an long value
+
+The value inside of the parentheses (``long(...)``) can be of any type.
+However, if it is not a numeric type (like ``double``, ``char``,
+etc.), you will get strange results.
+
+See the :ref:`long <lang-long>` reference for details about the
+precision and limitations of ``long`` variables on the Maple.
+
+See Also
+--------
+
+- :ref:`long <lang-long>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/modulo.rst b/docs/source/lang/cpp/modulo.rst
new file mode 100644
index 0000000..289fba0
--- /dev/null
+++ b/docs/source/lang/cpp/modulo.rst
@@ -0,0 +1,70 @@
+.. highlight:: cpp
+
+.. _lang-modulo:
+
+Modulo Operator (``%``)
+=======================
+
+Calculates the `remainder <http://en.wikipedia.org/wiki/Remainder>`_
+when one integer is divided by another. It is useful for keeping a
+variable within a particular range (e.g. the size of an array).
+
+Syntax
+------
+
+::
+
+ dividend % divisor
+
+Parameters
+----------
+
+**dividend**: the number to be divided
+
+**divisor**: the number to divide by
+
+Returns
+-------
+
+The remainder of **dividend**\ /\ **divisor**\ .
+
+Examples
+--------
+
+::
+
+ int x;
+ x = 7 % 5; // x now contains 2
+ x = 9 % 5; // x now contains 4
+ x = 5 % 5; // x now contains 0
+ x = 4 % 5; // x now contains 4
+
+::
+
+ /* update one value in an array each time through a loop */
+
+ int values[10];
+ int i = 0;
+
+ void setup() {
+ // no setup necessary
+ }
+
+ void loop() {
+ values[i] = analogRead(0);
+ i = (i + 1) % 10; // modulo operator makes sure i stays between 0 and 9
+ }
+
+Tip
+---
+
+The modulo operator does not work on floats. For that, you can use
+the C standard library function `fmod()
+<http://sourceware.org/newlib/libm.html#fmod>`_.
+
+See Also
+--------
+
+- :ref:`Arithmetic <lang-arithmetic>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/numeric-types.rst b/docs/source/lang/cpp/numeric-types.rst
new file mode 100644
index 0000000..9d2be48
--- /dev/null
+++ b/docs/source/lang/cpp/numeric-types.rst
@@ -0,0 +1,79 @@
+.. _lang-numeric-types:
+
+Numeric types
+=============
+
+This document serves as a reference for all of the built-in numeric
+types which are available when programming in the IDE. Programmers
+using the :ref:`command-line tools <unix-toolchain>` will have access
+to these types as long as they have imported ``wirish.h``; several are
+defined in in `libmaple_types.h
+<https://github.com/leaflabs/libmaple/blob/master/libmaple/libmaple_types.h>`_.
+
+.. _lang-numeric-types-integral:
+
+Integral types
+--------------
+
+.. cpp:type:: char
+
+ 8-bit integer value.
+
+.. cpp:type:: short
+
+ 16-bit integer value.
+
+.. cpp:type:: int
+
+ 32-bit integer value.
+
+.. cpp:type:: long
+
+ 64-bit integer value.
+
+.. cpp:type:: long long
+
+ 64-bit integer value.
+
+.. cpp:type:: int8
+
+ Synonym for ``char``.
+
+.. cpp:type:: uint8
+
+ Synonym for ``unsigned char``.
+
+.. cpp:type:: int16
+
+ Synonym for ``short``.
+
+.. cpp:type:: uint16
+
+ Synonym for ``unsigned short``.
+
+.. cpp:type:: int32
+
+ Synonym for ``int``.
+
+.. cpp:type:: uint32
+
+ Synonym for ``unsigned int``
+
+.. cpp:type:: int64
+
+ Synonym for ``long long``
+
+.. cpp:type:: uint64
+
+ Synonym for ``unsigned long long``.
+
+Floating-Point Types
+--------------------
+
+.. cpp:type:: float
+
+ 32-bit, IEEE 754 single-precision floating-point type.
+
+.. cpp:type:: double
+
+ 64-bit, IEEE 754 double-precision floating-point type.
diff --git a/docs/source/lang/cpp/pointer.rst b/docs/source/lang/cpp/pointer.rst
new file mode 100644
index 0000000..0a42270
--- /dev/null
+++ b/docs/source/lang/cpp/pointer.rst
@@ -0,0 +1,31 @@
+.. _lang-pointer:
+
+Pointer Operators (``&``, ``*``)
+================================
+
+The pointer operators ``&`` (reference) and ``*`` (dereference) are
+different from the bitwise math operator :ref:`&
+<lang-bitwisemath-and>` and the arithmetic operator :ref:`*
+<lang-arithmetic>`.
+
+Pointers are one of the more complicated subjects for beginners in
+learning C, and it is possible to write many useful Arduino sketches
+without ever encountering pointers. However, for manipulating certain
+data structures, the use of pointers can simplify the code, improve
+its efficiency, and generally provide many benefits that would be
+difficult to achieve without the use of pointers.
+
+Introducing pointers is somewhat outside the scope of this
+documentation. However, a good `pointer tutorial
+<http://www.cplusplus.com/doc/tutorial/pointers/>`_ is available.
+Also see the `Wikipedia article on pointers
+<http://en.wikipedia.org/wiki/Pointer_%28computing%29>`_, especially
+the section on `pointers in C
+<http://en.wikipedia.org/wiki/Pointer_%28computing%29#C_pointers>`_.
+
+See Also
+--------
+
+- http://xkcd.com/138/
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/return.rst b/docs/source/lang/cpp/return.rst
new file mode 100644
index 0000000..7b5039e
--- /dev/null
+++ b/docs/source/lang/cpp/return.rst
@@ -0,0 +1,61 @@
+.. highlight:: cpp
+
+.. _lang-return:
+
+``return``
+==========
+
+Terminates a function and return a value from a function to the
+calling function, if the function has non-``void`` return type.
+
+Syntax:
+-------
+
+::
+
+ // from within a "void" function:
+ return;
+
+ // from within a non-"void" function:
+ return value;
+
+In the second case, ``value`` should have a type which is the same as
+the return type of the function, or be convertible to it (like an
+``int`` to a ``long``, etc.; see :ref:`this note
+<lang-arithmetic-typeconversion>` for some references).
+
+Examples:
+---------
+
+A function to compare a sensor input to a threshold::
+
+ // converts analog readings between 0 and 400 to 0, and 400 up to 1.
+ int checkSensor() {
+ if (analogRead(0) > 400) {
+ return 1;
+ else {
+ return 0;
+ }
+ }
+
+An early ``return`` is also useful when testing a section of code
+without having to "comment out" large sections of possibly buggy code,
+like so::
+
+ void loop() {
+
+ // brilliant code idea to test here
+
+ return;
+
+ // the rest of a dysfunctional sketch here
+ // this code will never be executed
+ }
+
+See Also
+--------
+
+- :ref:`comments <lang-comments>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/scope.rst b/docs/source/lang/cpp/scope.rst
new file mode 100644
index 0000000..7b65bab
--- /dev/null
+++ b/docs/source/lang/cpp/scope.rst
@@ -0,0 +1,120 @@
+.. highlight:: cpp
+
+.. _lang-scope:
+
+Scope
+=====
+
+Variables in the C++ programming language, which Maple uses (all of
+your sketches are C++ programs in disguise), have a property called
+*scope*. Simply put, a variable's scope is made up of all of the
+lines where the variable can be used.
+
+Scope in C++ is a fairly complex topic, so we won't try to describe it
+in full here. Instead, we present a simplified view, describing two
+different kinds of scopes, *global* and *local*. For more detailed
+information, consult a C++ reference.
+
+Global and Local Variables
+--------------------------
+
+A global variable is one that can be "seen" by every function in a
+program. In the :ref:`Maple IDE <ide>`, any variable declared outside
+of a function (like :ref:`setup() <lang-setup>` and :ref:`loop()
+<lang-loop>`) is a global variable.
+
+A local variable can only be "seen" inside of a particular function.
+You can declare a variable to be local to a function by declaring it
+inside of the :ref:`curly braces <lang-curly-braces>` which enclose
+that function.
+
+When programs start to get larger and more complex, local variables
+are a useful way to ensure that a function has exclusive access to its
+own variables. This prevents programming errors when one function
+mistakenly modifies variables used by another function.
+
+It is also sometimes useful to declare and initialize a variable
+inside a :ref:`for <lang-for>` loop. This creates a variable that
+can only be accessed from inside the loop body.
+
+Example
+-------
+
+Here is an example sketch (which you can copy into the Maple IDE and
+run on your Maple) that illustrates the use of global and local
+variables, as well as declaring variables inside of a ``for`` loop.
+Be sure to open a :ref:`serial monitor <ide-serial-monitor>` after you
+:ref:`verify <ide-verify>` and :ref:`upload <ide-upload>` the sketch::
+
+ int globalVar; // any function will see this variable
+
+ void setup() {
+ // since "globalVar" is declared outside of any function,
+ // every function can "see" and use it:
+ globalVar = 50;
+
+ // the variables "i" and "d" declared inside the "loop" function
+ // can't be seen here. see what happens when you uncomment the
+ // following lines, and try to Verify (compile) the sketch:
+ //
+ // i = 16;
+ // SerialUSB.print("i = ");
+ // SerialUSB.println(i);
+ // d = 26.5;
+ // SerialUSB.print("d = ");
+ // SerialUSB.println(d);
+ }
+
+ void loop() {
+ // since "i" and "d" are declared inside of the "loop" function,
+ // they can only be seen and used from inside of it:
+ int i;
+ double d;
+
+ for (int j = 0; j < 5; j++) {
+ // variable i can be used anywhere inside the "loop" function;
+ // variable j can only be accessed inside the for-loop brackets:
+ i = j * j;
+ SerialUSB.print("i = ");
+ SerialUSB.println(i);
+ }
+
+ // globalVar can be accessed from anywhere. note how even
+ // though we set globalVar = 50 in the "setup" function, we can
+ // see that value here:
+ SerialUSB.print("globalVar = ");
+ SerialUSB.println(globalVar);
+
+ // d can be accessed from anywhere inside the "loop" function:
+ d = 26.5;
+ SerialUSB.print("d = ");
+ SerialUSB.print(d);
+ SerialUSB.println(" (before separateFunction())");
+
+ separateFunction();
+
+ // notice how even though separateFunction() has a variable
+ // named "d", it didn't touch our (local) variable which has
+ // the same name:
+ SerialUSB.print("d = ");
+ SerialUSB.print(d);
+ SerialUSB.println(" (after separateFunction())");
+ }
+
+ void separateFunction() {
+ // variable "d" here has the same name as variable "d" inside of
+ // the "loop" function, but since they're both _local_
+ // variables, they don't affect each other:
+ double d = 30.5;
+ SerialUSB.print("d = ");
+ SerialUSB.print(d);
+ SerialUSB.println(" (inside of separateFunction())");
+ }
+
+See Also
+--------
+
+- `C++ programming Wikibook <http://en.wikibooks.org/wiki/C%2B%2B_Programming/Programming_Languages/C%2B%2B/Code/Statements/Scope>`_.
+- Wikipedia article on `scope <http://en.wikipedia.org/wiki/Scope_%28programming%29>`_
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/semicolon.rst b/docs/source/lang/cpp/semicolon.rst
new file mode 100644
index 0000000..8164616
--- /dev/null
+++ b/docs/source/lang/cpp/semicolon.rst
@@ -0,0 +1,25 @@
+.. highlight:: cpp
+
+.. _lang-semicolon:
+
+Semicolon (``;``)
+=================
+
+Used to end a line of code. Example::
+
+ int a = 13;
+
+Tip
+---
+
+Forgetting to end a line in a semicolon will result in a compiler
+error. The error text may be obvious, and refer to a missing
+semicolon, or it may not. If an impenetrable or seemingly illogical
+compiler error comes up, one of the first things to check is a
+missing semicolon, in the immediate vicinity, preceding the line at
+which the compiler complained.
+
+
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/sizeof.rst b/docs/source/lang/cpp/sizeof.rst
new file mode 100644
index 0000000..eae509c
--- /dev/null
+++ b/docs/source/lang/cpp/sizeof.rst
@@ -0,0 +1,64 @@
+.. highlight:: cpp
+
+.. _lang-sizeof:
+
+``sizeof()``
+============
+
+The ``sizeof`` operator on the Maple returns the number of bytes
+needed to store a value of a given type\ [#fcharsize]_. This can be
+an ordinary numeric type, like ``int``. It can be something more
+complicated, like a ``struct`` or ``union``. If the argument to
+``sizeof`` is an array, it returns the total number of bytes occupied
+by the array.
+
+The general syntax looks like this::
+
+ sizeof(type)
+ sizeof(var)
+
+Example
+-------
+
+The ``sizeof`` operator is useful for dealing with arrays (such as
+strings) where it is convenient to be able to change the size of the
+array without breaking other parts of the program.
+
+This program prints out a text string one character at a time. Try
+changing the text phrase::
+
+ char myStr[] = "this is a test";
+ int i;
+
+ void setup() {
+ Serial.begin(9600);
+ }
+
+ void loop() {
+ for (i = 0; i < sizeof(myStr) - 1; i++) {
+ Serial.print(i, DEC);
+ Serial.print(" = ");
+ Serial.println(myStr[i], BYTE);
+ }
+ }
+
+
+Note that ``sizeof`` returns the total number of bytes. So for larger
+variable types such as ``int``, the :ref:`for loop <lang-for>`
+would look something like this::
+
+ for (i = 0; i < (sizeof(myInts)/sizeof(int)) - 1; i++) {
+ // do something with myInts[i]
+ }
+
+.. rubric:: Footnotes
+
+.. [#fcharsize] Technically (and pedantically) speaking, ``sizeof``
+ returns a multiple of the number of bits a ``char`` occupies in
+ memory. However, on the Maple (this goes for most C++
+ implementations), a ``char`` occupies 8 bits = 1 byte. All the C++
+ standard guarantees, however, is that a ``char`` occupies at
+ *least* 8 bits.
+
+.. include:: cc-attribution.txt
+
diff --git a/docs/source/lang/cpp/sqrt.rst b/docs/source/lang/cpp/sqrt.rst
new file mode 100644
index 0000000..956a754
--- /dev/null
+++ b/docs/source/lang/cpp/sqrt.rst
@@ -0,0 +1,25 @@
+.. _lang-sqrt:
+
+sqrt()
+======
+
+Calculates the square root of a number.
+
+Library Documentation
+---------------------
+
+.. doxygenfunction:: sqrt
+
+Arduino Compatibility
+---------------------
+
+The Maple versino of ``sqrt()`` is compatible with Arduino.
+
+See Also
+--------
+
+- :ref:`pow <lang-pow>`
+- :ref:`sq <lang-sq>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/static.rst b/docs/source/lang/cpp/static.rst
new file mode 100644
index 0000000..5d1802e
--- /dev/null
+++ b/docs/source/lang/cpp/static.rst
@@ -0,0 +1,57 @@
+.. highlight:: cpp
+
+.. _lang-static:
+
+``static``
+==========
+
+The ``static`` keyword can be used to create variables that are
+visible to only one function. However, unlike local variables that get
+created and destroyed every time a function is called, ``static``
+variables persist beyond the function call, preserving their data
+between function calls.
+
+Variables declared as ``static`` will only be created and initialized
+the first time a function is called.
+
+.. note:: This is only one use of the ``static`` keyword in C++. It
+ has some other important uses that are not documented here; consult
+ a reliable C++ reference for details.
+
+Example
+-------
+
+One use case for ``static`` variables is implementing counters that
+last longer than the functions which need them, but shouldn't be
+shared to other functions. Here's an example::
+
+ void setup() {
+ SerialUSB.begin();
+ }
+
+ void loop() {
+ int reading;
+ if (timeToReadSensors()) {
+ reading = readSensors();
+ }
+ // do something with reading
+ }
+
+ int readSensors() {
+ static int numSensorReadings = 0;
+ numSensorReadings++;
+ if (numSensorReadings % 100 == 0) {
+ SerialUSB.print("just got to another 100 sensor readings");
+ }
+ return analogRead(...);
+ }
+
+In this example, the static variable ``numSensorReadings`` is
+initialized to zero the first time ``readSensors()`` is called, and
+then incremented, so it starts out at one. Subsequent calls to
+``readSensors()`` won't reset ``numSensorReadings`` to zero, because
+it was declared ``static``. Thus, ``numSensorReadings`` is a count of
+the number of times that ``readSensors()`` has been called.
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/string.rst b/docs/source/lang/cpp/string.rst
new file mode 100644
index 0000000..0a270da
--- /dev/null
+++ b/docs/source/lang/cpp/string.rst
@@ -0,0 +1,128 @@
+.. highlight:: cpp
+
+.. _lang-string:
+
+Strings
+=======
+
+Text strings can be represented in two ways. You can
+
+1. Use the :ref:`String <lang-stringclass>` data type, which is
+part of the core as of version 0.0.9, or
+
+2. You can make a string out of an array of type :ref:`char
+<lang-char>` and null-terminate it.
+
+This page describes the second method.
+
+Examples
+--------
+
+All of the following are valid declarations for strings::
+
+ char str1[15];
+ char str2[6] = {'m', 'a', 'p', 'l', 'e'};
+ char str3[6] = {'m', 'a', 'p', 'l', 'e', '\0'};
+ char str4[ ] = "maple";
+ char str5[6] = "maple";
+ char str6[15] = "maple";
+
+As you can see, there are several methods available for declaring and
+initializing strings:
+
+- Declare an array of ``char`` without initializing it, as with ``str1``.
+
+- Declare an array of ``char`` (with one extra ``char``) and the
+ compiler will add the required null character, as with ``str2``.
+
+- Explicitly add the null character (``'\0'``), as with ``str3``.
+
+- Initialize with a string constant in quotation marks (``"..."``);
+ the compiler will size the array to fit the string constant and a
+ terminating null character (``str4``).
+
+- Initialize the array with an explicit size and string constant,
+ (``str5``).
+
+- Initialize the array, leaving extra space for a larger string
+ (``str6``).
+
+Null Termination
+----------------
+
+Generally, strings are terminated with a null character (`ASCII
+<http://en.wikipedia.org/wiki/ASCII>`_ code 0). This allows functions
+(like ``SerialUSB.print()``) to tell where the end of a string is.
+Otherwise, they would continue reading subsequent bytes of memory that
+aren't actually part of the string.
+
+This means that your string needs to have space for one more character
+than the text you want it to contain. That is why ``str2`` and
+``str5`` need to be six characters, even though "maple" is only five
+-- the last position is automatically filled with a NULL
+character. ``str4`` will be automatically sized to six characters, one
+for the extra null. In the case of ``str3``, we've explicitly included
+the null character (written ``'\0'``) ourselves.
+
+Note that it's possible to have a string without a final null
+character (e.g. if you had specified the length of ``str2`` as five
+instead of six). This will break most functions that use strings, so
+you shouldn't do it intentionally. If you notice something behaving
+strangely (operating on characters not in the string), however, this
+could be the problem.
+
+Single quotes or double quotes?
+-------------------------------
+
+Strings are always defined inside double quotes (``"Abc"``) and
+characters are always defined inside single quotes (``'A'``).
+
+Wrapping long strings
+---------------------
+
+You can wrap long strings like this::
+
+ char myString[] = "This is the first line"
+ " this is the second line"
+ " etcetera";
+
+Arrays of Strings
+-----------------
+
+It is often convenient, when working with large amounts of text,
+such as a project with an LCD display, to setup an array of
+strings. Because strings themselves are arrays, this is in actually
+an example of a two-dimensional array.
+
+In the code below, the asterisk after the datatype char ``char *``
+indicates that this is an array of "pointers". All array names are
+actually pointers, so this is required to make an array of arrays.
+Pointers are one of the more esoteric parts of C for beginners to
+understand, but it isn't necessary to understand pointers in detail to
+use them effectively here::
+
+ char* myStrings[] = {"This is string 1", "This is string 2",
+ "This is string 3", "This is string 4",
+ "This is string 5", "This is string 6"};
+
+ void setup() {
+ SerialUSB.begin();
+ }
+
+ void loop() {
+ for (int i = 0; i < 6; i++) {
+ SerialUSB.println(myStrings[i]);
+ delay(500);
+ }
+ }
+
+
+See Also
+--------
+
+- :ref:`array <lang-array>`
+- :ref:`__attribute__ <arm-gcc-attribute-flash>`
+- :ref:`Variables <lang-variables>`
+
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/switchcase.rst b/docs/source/lang/cpp/switchcase.rst
new file mode 100644
index 0000000..b484bc5
--- /dev/null
+++ b/docs/source/lang/cpp/switchcase.rst
@@ -0,0 +1,118 @@
+.. highlight:: cpp
+
+.. _lang-switchcase:
+
+``switch``\ /\ ``case``
+=======================
+
+Like :ref:`if <lang-if>` statements, A ``switch`` statement controls
+program flow by allowing you to specify different code that should be
+executed under various cases.
+
+The general syntax looks like this::
+
+ switch (var) {
+ case val1:
+ // statements
+ break;
+ case val2:
+ // statements
+ break;
+ ...
+ default:
+ // statements
+ }
+
+Where ``var`` is a variable whose value to investigate, and the
+``val1``, ``val2`` after each ``case`` are constant values that
+``var`` might be.
+
+Description
+-----------
+
+A ``switch`` statement compares the value of a variable to the values
+specified in ``case`` statements. When a ``case`` statement is found
+whose value matches that of the variable, the code in that case
+statement is run.
+
+Here's a more concrete example::
+
+ switch (var) {
+ case 1:
+ doThing1();
+ break;
+ case 2:
+ doThing2();
+ break;
+ }
+ afterTheSwitch();
+
+In the above example, if ``var == 1``, then the code beginning on the
+line after ``case 1`` gets executed. That is, if ``var`` is one,
+``doThing1()`` gets called first, and then the ``break`` statement is
+executed.
+
+The ``break`` keyword exits the ``switch`` statement, and is typically
+used at the end of each ``case``. Since there is a ``break`` at the
+end of ``case 1``, the ``switch`` statement exits, and the next line
+to be run is the one which calls ``afterTheSwitch()``.
+
+Without a ``break``, the ``switch`` statement will continue executing
+the following ``case`` expressions ("falling-through") until a
+``break`` (or the end of the switch statement) is reached. Let's
+pretend the ``switch`` looked like this instead::
+
+ switch (var) {
+ case 1:
+ doThing1();
+ // no break statement anymore
+ case 2:
+ doThing2();
+ break;
+ }
+ afterTheSwitch();
+
+Now, if ``var`` is one, ``doThing1()`` gets executed like before.
+However, without a ``break``, the code would continue to be executed
+line-by-line, so ``doThing2()`` would be called next. At this point,
+a ``break`` has been reached, so the program continues by calling
+``afterTheSwitch()``. This is usually not what you want, which is why
+each ``case`` usually has a ``break`` at the end.
+
+.. _lang-switchcase-default:
+
+Writing "``default:``" instead of a ``case`` statement allows you to
+specify what to do if none of the ``case`` statements matches. Having
+a ``default`` is optional (you can leave it out), but if you have one,
+it must appear after all of the ``case`` statements. Let's add a
+``default`` to the ``switch`` we've been discussing::
+
+ switch (var) {
+ case 1:
+ doThing1();
+ break;
+ case 2:
+ doThing2();
+ break;
+ default:
+ doSomethingElse();
+ }
+ afterTheSwitch();
+
+If ``var`` is one, then ``doThing1()`` gets called. If ``var`` is
+two, ``doThing2()`` gets called. If ``var`` is anything else,
+``doSomethingElse()`` gets called. As stated above, a ``default`` is
+optional. If you're missing one and none of the ``case`` statements
+match, the ``switch`` does nothing at all, as if it weren't there.
+
+``switch`` statements are often used with an :ref:`enum <lang-enum>`
+value as the variable to compare. In this case, you can write down
+all of the values the ``enum`` takes as ``case`` statements, and be
+sure you've covered all the possibilities.
+
+See also:
+---------
+
+- :ref:`if/else <lang-if>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/unsignedchar.rst b/docs/source/lang/cpp/unsignedchar.rst
new file mode 100644
index 0000000..5b946ed
--- /dev/null
+++ b/docs/source/lang/cpp/unsignedchar.rst
@@ -0,0 +1,33 @@
+.. highlight:: cpp
+
+.. _lang-unsignedchar:
+
+``unsigned char``
+=================
+
+An unsigned version of the :ref:`char <lang-char>` data type. An
+``unsigned char`` occupies 1 byte of memory; it stores an integer from
+0 to 255.
+
+Like an :ref:`unsigned int <lang-unsignedint>`, an ``unsigned char``
+won't store negative numbers; it is also subject to the same
+:ref:`overflow issues <lang-int-overflow>` as any integral data type.
+
+Example
+-------
+
+::
+
+ unsigned char c = 240;
+
+See Also
+--------
+
+
+- :ref:`byte <lang-byte>`
+- :ref:`int <lang-int>`
+- :ref:`array <lang-array>`
+- :ref:`SerialUSB.println() <lang-serialusb-println>`
+- :ref:`Serial.println() <lang-serial-println>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/unsignedint.rst b/docs/source/lang/cpp/unsignedint.rst
new file mode 100644
index 0000000..f6311da
--- /dev/null
+++ b/docs/source/lang/cpp/unsignedint.rst
@@ -0,0 +1,55 @@
+.. highlight:: cpp
+
+.. _lang-unsignedint:
+
+``unsigned int``
+================
+
+An ``unsigned int`` (unsigned integer) is the same as an :ref:`int
+<lang-int>` in that it stores a 4 byte integer value. However,
+Instead of storing both negative and positive numbers, an ``unsigned
+int`` can only store nonnegative values, yielding a range of 0 to
+4,294,967,295 (the positive value is 2^32 - 1).
+
+The difference between an ``unsigned int`` and a (signed) ``int`` lies
+in the way the highest bit, sometimes referred to as the "sign" bit,
+is interpreted. In the case of the Maple ``int`` type (which is
+signed), if the high bit is a "1", the number is interpreted as a
+negative number, using a technique known as `two's complement math
+<http://en.wikipedia.org/wiki/Two%27s_complement#Explanation>`_. The
+bits in an an ``unsigned int`` are interpreted according to the usual
+rules for converting `binary to decimal
+<http://en.wikipedia.org/wiki/Binary_numeral_system#Counting_in_binary>`_.
+
+An ``unsigned int`` is subject to the same :ref:`overflow issues
+<lang-int-overflow>` as a regular ``int``; the only difference is
+that an ``unsigned int`` will "underflow" at 0, and "overflow" at
+4,294,967,295. Here is some example code which illustrates this::
+
+ unsigned int x;
+ x = 0;
+ x--; // x now contains 4,294,967,295; rolled over "left to right"
+ x++; // x now contains 0; rolled over "right to left"
+
+Here is an example of declaring an ``unsigned int`` variable named
+``ledPin``, then giving it value 13::
+
+ unsigned int ledPin = 13;
+
+The general syntax for declaring an ``unsigned int`` variable named
+``var``, then giving it value ``val``, looks like::
+
+ unsigned int var = val;
+
+See Also
+--------
+
+- :ref:`int <lang-int>`
+- :ref:`char <lang-char>`
+- :ref:`unsigned char <lang-unsignedchar>`
+- :ref:`long <lang-long>`
+- :ref:`unsigned long <lang-unsignedlong>`
+- :ref:`Integer Constants <lang-constants-integers>`
+- :ref:`Variables <lang-variables>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/unsignedlong.rst b/docs/source/lang/cpp/unsignedlong.rst
new file mode 100644
index 0000000..14a4fc3
--- /dev/null
+++ b/docs/source/lang/cpp/unsignedlong.rst
@@ -0,0 +1,41 @@
+.. highlight:: cpp
+
+.. _lang-unsignedlong:
+
+``unsigned long``
+=================
+
+An unsigned version of the :ref:`long <lang-long>` data type. An
+``unsigned long`` occupies 8 bytes of memory; it stores an integer
+from 0 to 2^64-1, which is approximately 1.8×10^19 (18 quintillion, or
+18 billion billion).
+
+Like an :ref:`unsigned int <lang-unsignedint>`, an ``unsigned long``
+won't store negative numbers; it is also subject to the same
+:ref:`overflow issues <lang-int-overflow>` as any integral data type.
+
+Here is an example of declaring an ``unsigned long`` variable named
+``c``, then giving it value 299,792,458,000,000,000 (see :ref:`integer
+constants <lang-constants-integers-u-l>` for an explanation of the "L"
+at the end of the number)::
+
+ // Speed of light in nanometers per second (approximate).
+ unsigned long c = 299792458000000000L;
+
+The general syntax for declaring an ``unsigned long`` variable named
+``var``, then giving it value ``val``, looks like::
+
+ unsigned long var = val;
+
+See Also
+--------
+
+- :ref:`long <lang-long>`
+- :ref:`int <lang-int>`
+- :ref:`unsigned <lang-unsignedint>`
+- :ref:`char <lang-char>`
+- :ref:`unsigned char <lang-unsignedchar>`
+- :ref:`Integer Constants <lang-constants-integers>`
+- :ref:`Variables <lang-variables>`
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/variables.rst b/docs/source/lang/cpp/variables.rst
new file mode 100644
index 0000000..9094cd5
--- /dev/null
+++ b/docs/source/lang/cpp/variables.rst
@@ -0,0 +1,170 @@
+.. highlight:: cpp
+
+.. _lang-variables:
+
+Variables
+=========
+
+A variable is a way of naming and storing a value for later use by
+the program, such as data from a sensor or an intermediate value
+used in a calculation.
+
+.. contents:: Contents
+ :local:
+
+.. _lang-variables-declaring:
+
+Declaring Variables
+-------------------
+
+Before they are used, all variables have to be *declared*. Declaring a
+variable means defining its type, giving it a name, and (optionally)
+giving it an initial value (this is often referred to as
+*initializing* the variable). Variables do not have to be initialized
+(given a value) when they are declared, but it is good style to give
+them an initial value whenever possible.
+
+Here is an example of declaring a variable named ``inputVariable1``
+with type :ref:`int <lang-int>` (the ``int`` type is used to store
+integers, like -2, -1, 0, 1, etc.)::
+
+ int inputVariable1;
+
+In the above declaration, we did not give the variable an initial
+value. Here is another example, where we declare an ``int`` variable
+named ``inputVariable2``, with an initial value of ``0``::
+
+ int inputVariable2 = 0;
+
+The Maple environment comes ready to use with many useful types of
+variables. See the :ref:`built-in types <lang-numeric-types>` page
+for more information.
+
+Here are a few examples of declaring variables of different types::
+
+ int lightSensVal;
+ char currentLetter;
+ unsigned long speedOfLight = 186000UL;
+ char errorMessage = {"choose another option"}; // see string
+
+Naming Variables
+----------------
+
+The rules for naming a variable are simple. Names for variables can
+contain letters, numbers, and underscores (the underscore is the
+:kbd:`_` character), and cannot begin with a number. So
+``temperature_reading``, ``tempReading``, ``tempReading1``, and
+``tempReading2`` are all valid variable names, but ``4_temp_readings``
+is not, because it begins with a number.
+
+You cannot choose a name for a variable that is one of the C++
+:ref:`keywords <lang-keywords>`.
+
+Variable names are case-sensitive, so "tempreading" and "tempReading"
+are different variables. However, it is very bad style to write code
+that chooses variables which are the same up to case.
+
+You should give your variables descriptive names, so as to make your
+code more readable. Variable names like ``tiltSensor`` or
+``pushButton`` help you (and anyone else reading your code) understand
+what the variable represents. Variable names like ``var`` or
+``value``, on the other hand, do little to make your code readable.
+
+.. _lang-variables-scope:
+
+Variable Scope
+--------------
+
+An important choice that programmers face is where (in the program
+text) to declare variables. The specific place that variables are
+declared influences how various functions in a program will "see" the
+variable. This is called variable *scope*. See the :ref:`scope
+reference <lang-scope>` for more information.
+
+.. _lang-variables-initializing:
+
+Initializing Variables
+----------------------
+
+Variables may be *initialized* (assigned a starting value) when they
+are declared or not. It is always good programming practice however to
+double check that a variable has valid data in it before it is used.
+Using a variable before you give it a value is a common source of
+bugs.
+
+.. _lang-variables-rollover:
+
+Variable Rollover
+-----------------
+
+Every (numeric) type has a valid *range*. The range of a type is the
+smallest and largest value that a variable of that type can store.
+For example, the :ref:`int <lang-int>` type has a range of
+-2,147,483,648 to 2,147,483,647 [#frange]_.
+
+When variables are made to exceed their range's maximum value, they
+"roll over" back to their minimum value. Note that this happens in
+both directions. It's like in the game *Pac-Man* -- when Pac-Man goes
+past the right edge of the screen, he reappears on the left, and when
+he goes past the left side of the screen, he reappears on the right::
+
+ int x;
+ x = -2,147,483,648;
+ x = x - 1; // x now contains -2,147,483,647; rolled over "left to right"
+
+ x = 2,147,483,647;
+ x = x + 1; // x now contains -2,147,483,648; rolled over "right to left"
+
+Each numeric type's reference page includes its range. See the
+:ref:`built-in types <lang-numeric-types>` reference for links to each
+type's reference page.
+
+Using Variables
+---------------
+
+Once variables have been declared, they are given values using the
+:ref:`assignment operator <lang-assignment>`, which is a single equals
+sign, ``=``. The assignment operator tells the program to store the
+value on the right side of the equals sign into the variable on the
+left side::
+
+ inputVariable1 = 7; // sets variable named inputVariable1 to 7
+ inputVariable2 = analogRead(2); // sets variable named inputVariable2 to
+ // the (digitized) input voltage read from
+ // analog pin #2
+
+Once a variable has been set (assigned a value), you can test its
+value to see if it meets certain conditions, or you can use its value
+directly. For instance, the following code tests whether the
+inputVariable2 is less than 100, then sets a delay based on
+inputVariable2 (which, at that point, is at least 100)::
+
+ if (inputVariable2 < 100) {
+ inputVariable2 = 100;
+ }
+
+ delay(inputVariable2);
+
+See Also
+--------
+
+- :ref:`lang-scope`
+- :ref:`lang-numeric-types`
+
+.. rubric:: Footnotes
+
+.. [#frange] This range might seem a little weird at first. The
+ reasons for this range of values have to do with the fact that an
+ ``int`` occupies 32 bits of memory, and the facts ::
+
+ 2^31 = -2,147,483,648
+ 2^31 - 1 = 2,147,483,647
+
+
+ Why 2^31 instead of 2^32? Well, that has to do with `how ints are
+ (usually) stored
+ <http://en.wikipedia.org/wiki/Two%27s_complement>`_ on computers.
+
+
+.. include:: cc-attribution.txt
+
diff --git a/docs/source/lang/cpp/void.rst b/docs/source/lang/cpp/void.rst
new file mode 100644
index 0000000..88bd448
--- /dev/null
+++ b/docs/source/lang/cpp/void.rst
@@ -0,0 +1,31 @@
+.. highlight:: cpp
+
+.. _lang-void:
+
+``void``
+========
+
+The ``void`` keyword is used only in function declarations. It
+indicates that the function is expected to return no information to
+the function from which it was called, or that it expects no arguments
+from its caller.
+
+Example
+-------
+
+::
+
+ // actions are performed in the functions "setup" and "loop"
+ // but no information is reported to the larger program
+
+ void setup() {
+ // ...
+ }
+
+ void loop() {
+ // ...
+ }
+
+.. TODO doc page on function declaration?
+
+.. include:: cc-attribution.txt
diff --git a/docs/source/lang/cpp/while.rst b/docs/source/lang/cpp/while.rst
new file mode 100644
index 0000000..9047d05
--- /dev/null
+++ b/docs/source/lang/cpp/while.rst
@@ -0,0 +1,38 @@
+.. highlight:: cpp
+
+.. _lang-while:
+
+``while``
+=========
+
+Syntax
+------
+
+::
+
+ while (expression) {
+ // block of code
+ }
+
+Description
+-----------
+
+``while`` loops will repeat the statements inside their associated
+block of code until the expression inside the parentheses becomes
+:ref:`false <lang-constants-false>`. Something must change the tested
+expressions' value, or the ``while`` loop will never exit. This could
+be in your code, such as an incremented variable, or an external
+condition, such as testing a sensor.
+
+Example
+-------
+
+::
+
+ var = 0;
+ while(var < 200) {
+ // do something repetitive 200 times
+ var++;
+ }
+
+.. include:: cc-attribution.txt