5 files changed, 0 insertions, 272 deletions
diff --git a/docs/source/lang/unimplemented/notone.rst b/docs/source/lang/unimplemented/notone.rst
deleted file mode 100644
index 8af878b..0000000
--- a/docs/source/lang/unimplemented/notone.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-.. _lang-notone:
-
-noTone()
-========
-
-Description
------------
-
-Stops the generation of a square wave triggered by
-`tone <http://arduino.cc/en/Reference/Tone>`_\ (). Has no effect if
-no tone is being generated.
-
-**NOTE:** if you want to play different pitches on multiple pins,
-you need to call noTone() on one pin before calling tone() on the
-next pin.
-
-Syntax
-------
-
-noTone(pin)
-
-Parameters
-----------
-
-pin: the pin on which to stop generating the tone
-
-Returns
--------
-
-Nothing.
-
-See Also
---------
-
--  `tone <http://arduino.cc/en/Reference/Tone>`_ ()
-
-.. include:: /lang/cc-attribution.txt
diff --git a/docs/source/lang/unimplemented/pulsein.rst b/docs/source/lang/unimplemented/pulsein.rst
deleted file mode 100644
index 2b52428..0000000
--- a/docs/source/lang/unimplemented/pulsein.rst
+++ /dev/null
@@ -1,82 +0,0 @@
-.. _lang-pulsein:
-
-pulseIn()
-=========
-
-Description
------------
-
-Reads a pulse (either HIGH or LOW) on a pin. For example, if
-**value** is **HIGH**, **pulseIn()** waits for the pin to go
-**HIGH**, starts timing, then waits for the pin to go **LOW** and
-stops timing. Returns the length of the pulse in microseconds.
-Gives up and returns 0 if no pulse starts within a specified time
-out.
-
-
-
-The timing of this function has been determined empirically and
-will probably show errors in longer pulses. Works on pulses from 10
-microseconds to 3 minutes in length.
-
-
-
-Syntax
-------
-
-pulseIn(pin, value)
-pulseIn(pin, value, timeout)
-
-
-
-Parameters
-----------
-
-pin: the number of the pin on which you want to read the pulse.
-(*int*)
-
-
-
-value: type of pulse to read: either
-`HIGH <http://arduino.cc/en/Reference/Constants>`_ or
-`LOW <http://arduino.cc/en/Reference/Constants>`_. (*int*)
-
-
-
-timeout (optional): the number of microseconds to wait for the
-pulse to start; default is one second (*unsigned long*)
-
-
-
-Returns
--------
-
-the length of the pulse (in microseconds) or 0 if no pulse started
-before the timeout (*unsigned long*)
-
-
-
-Example
--------
-
-::
-
-
-
-    int pin = 7;
-    unsigned long duration;
-
-    void setup()
-    {
-      pinMode(pin, INPUT);
-    }
-
-    void loop()
-    {
-      duration = pulseIn(pin, HIGH);
-    }
-
-
-
-
-.. include:: /lang/cc-attribution.txt
diff --git a/docs/source/lang/unimplemented/stringclass.rst b/docs/source/lang/unimplemented/stringclass.rst
deleted file mode 100644
index b893e83..0000000
--- a/docs/source/lang/unimplemented/stringclass.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. _lang-stringclass:
-
-String Class
-============
-
-.. include:: /lang/cc-attribution.txt
diff --git a/docs/source/lang/unimplemented/stringobject.rst b/docs/source/lang/unimplemented/stringobject.rst
deleted file mode 100644
index e47ed7e..0000000
--- a/docs/source/lang/unimplemented/stringobject.rst
+++ /dev/null
@@ -1,89 +0,0 @@
-.. _lang-stringobject:
-
-String
-======
-
-Description
------------
-
-The String class, part of the core as of version 0019, allows you to
-use and manipulate strings of text in more complex ways than character
-arrays do. You can concatenate Strings, append to them, search for and
-replace substrings, and more. It takes more memory than a simple
-character array, but it is also more useful.
-
-
-
-For reference, character arrays are referred to as strings with a
-small s, and instances of the String class are referred to as
-Strings with a capital S. Note that constant strings, specified in
-"double quotes" are treated as char arrays, not instances of the
-String class.
-
-
-
-Functions
----------
-
-
--  `String <http://arduino.cc/en/Reference/StringConstructor>`_\ ()
--  `charAt <http://arduino.cc/en/Reference/StringCharAt>`_\ ()
--  `compareTo <http://arduino.cc/en/Reference/StringCompareTo>`_\ ()
--  `concat <http://arduino.cc/en/Reference/StringConcat>`_\ ()
--  `endsWith <http://arduino.cc/en/Reference/StringEndsWith>`_\ ()
--  `equals <http://arduino.cc/en/Reference/StringEquals>`_\ ()
--  `equalsIgnoreCase <http://arduino.cc/en/Reference/StringEqualsIgnoreCase>`_\ ()
--  `getBytes <http://arduino.cc/en/Reference/StringGetBytes>`_\ ()
--  `indexOf <http://arduino.cc/en/Reference/StringIndexOf>`_\ ()
--  `lastIndexOf <http://arduino.cc/en/Reference/StringLastIndexOf>`_\ ()
--  `length <http://arduino.cc/en/Reference/StringLength>`_\ ()
--  `replace <http://arduino.cc/en/Reference/StringReplace>`_\ ()
--  `setCharAt <http://arduino.cc/en/Reference/StringSetCharAt>`_\ ()
--  `startsWith <http://arduino.cc/en/Reference/StringStartsWith>`_\ ()
--  `substring <http://arduino.cc/en/Reference/StringSubstring>`_\ ()
--  `toCharArray <http://arduino.cc/en/Reference/StringToCharArray>`_\ ()
--  `toLowerCase <http://arduino.cc/en/Reference/StringToLowerCase>`_\ ()
--  `toUpperCase <http://arduino.cc/en/Reference/StringToUpperCase>`_\ ()
--  `trim <http://arduino.cc/en/Reference/StringTrim>`_\ ()
-
-
-
-Operators
----------
-
-
--  `[] (element access) <http://arduino.cc/en/Reference/StringBrackets>`_
--  `+ (concatenation) <http://arduino.cc/en/Reference/StringPlus>`_
--  `== (comparison) <http://arduino.cc/en/Reference/StringComparison>`_
-
-
-
-Examples
---------
-
-
--  `StringConstructors <http://arduino.cc/en/Tutorial/StringConstructors>`_
--  `StringAdditionOperator <http://arduino.cc/en/Tutorial/StringAdditionOperator>`_
--  `StringIndexOf <http://arduino.cc/en/Tutorial/StringIndexOf>`_
--  `StringAppendOperator <http://arduino.cc/en/Tutorial/StringAppendOperator>`_
--  `StringLengthTrim <http://arduino.cc/en/Tutorial/StringLengthTrim>`_
--  `StringCaseChanges <http://arduino.cc/en/Tutorial/StringCaseChanges>`_
--  `StringReplace <http://arduino.cc/en/Tutorial/StringReplace>`_
--  `StringCharacters <http://arduino.cc/en/Tutorial/StringCharacters>`_
--  `StringStartsWithEndsWith <http://arduino.cc/en/Tutorial/StringStartsWithEndsWith>`_
--  `StringComparisonOperators <http://arduino.cc/en/Tutorial/StringComparisonOperators>`_
--  `StringSubstring <http://arduino.cc/en/Tutorial/StringSubstring>`_
-
-
-
-See Also
---------
-
-
--  `Character array strings <http://arduino.cc/en/Reference/String>`_
--  `Variable Declaration <http://arduino.cc/en/Reference/VariableDeclaration>`_
-
-
-
-
-.. include:: /lang/cc-attribution.txt
diff --git a/docs/source/lang/unimplemented/tone.rst b/docs/source/lang/unimplemented/tone.rst
deleted file mode 100644
index 13d581e..0000000
--- a/docs/source/lang/unimplemented/tone.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-.. _lang-tone:
-
-tone()
-======
-
-Description
------------
-
-Generates a square wave of the specified frequency (and 50% duty
-cycle) on a pin. A duration can be specified, otherwise the wave
-continues until a call to
-`noTone <http://arduino.cc/en/Reference/NoTone>`_\ (). The pin can be
-connected to a piezo buzzer or other speaker to play tones.
-
-Only one tone can be generated at a time. If a tone is already
-playing on a different pin, the call to tone() will have no effect.
-If the tone is playing on the same pin, the call will set its
-frequency.
-
-Use of the tone() function will interfere with PWM output on pins 3
-and 11 (on boards other than the Mega).
-
-**NOTE:** if you want to play different pitches on multiple pins,
-you need to call noTone() on one pin before calling tone() on the
-next pin.
-
-Syntax
-------
-
-tone(pin, frequency)
-tone(pin, frequency, duration)
-
-Parameters
-----------
-
-pin: the pin on which to generate the tone
-
-frequency: the frequency of the tone in hertz
-
-duration: the duration of the tone in milliseconds (optional)
-
-Returns
--------
-
-nothing
-
-See Also
---------
-
--  `noTone <http://arduino.cc/en/Reference/NoTone>`_\ ()
--  `analogWrite <http://arduino.cc/en/Reference/AnalogWrite>`_\ ()
--  `Tutorial:Tone <http://arduino.cc/en/Tutorial/Tone>`_
--  `Tutorial:Pitch follower <http://arduino.cc/en/Tutorial/Tone2>`_
--  `Tutorial:Simple Keyboard <http://arduino.cc/en/Tutorial/Tone3>`_
--  `Tutorial: multiple tones <http://arduino.cc/en/Tutorial/Tone4>`_
--  `Tutorial: PWM <http://arduino.cc/en/Tutorial/PWM>`_
-
-.. include:: /arduino-cc-attribution.txt