1 files changed, 21 insertions, 44 deletions
diff --git a/docs/source/lang/micros.rst b/docs/source/lang/micros.rst
index 711c013..f12976b 100644
--- a/docs/source/lang/micros.rst
+++ b/docs/source/lang/micros.rst
@@ -1,69 +1,46 @@
+.. highlight:: cpp
+
 .. _lang-micros:
 
 micros()
 ========
 
-Description
------------
-
-Returns the number of microseconds since the Arduino board began
-running the current program. This number will overflow (go back to
-zero), after approximately 70 minutes. On 16 MHz Arduino boards
-(e.g. Duemilanove and Nano), this function has a resolution of four
-microseconds (i.e. the value returned is always a multiple of
-four). On 8 MHz Arduino boards (e.g. the LilyPad), this function
-has a resolution of eight microseconds.
-
-
-
-*Note*: there are 1,000 microseconds in a millisecond and 1,000,000
-microseconds in a second.
+Returns the number of microseconds since the Maple board began running
+the current program. This number will overflow (go back to zero),
+after approximately 70 minutes.
 
+.. note:: There are 1,000 microseconds in a millisecond, and 1,000,000
+   microseconds in a second.
 
+Library Documentation
+---------------------
 
-Parameters
-----------
-
-None
-
-
-
-Returns
--------
-
-Number of microseconds since the program started (*unsigned long*)
-
-
+.. doxygenfunction:: micros
 
 Example
 -------
 
 ::
 
-    unsigned long time;
+    unsigned int time;
 
-    void setup(){
-      Serial.begin(9600);
+    void setup() {
     }
-    void loop(){
-      Serial.print("Time: ");
+
+    void loop() {
+      SerialUSB.print("Time: ");
       time = micros();
-      //prints time since program started
-      Serial.println(time);
+      // prints time since program started
+      SerialUSB.println(time);
       // wait a second so as not to send massive amounts of data
       delay(1000);
     }
 
-
-
-See also
+See Also
 --------
 
-
--  `millis <http://arduino.cc/en/Reference/Millis>`_\ ()
--  `delay <http://arduino.cc/en/Reference/Delay>`_\ ()
--  `delayMicroseconds <http://arduino.cc/en/Reference/DelayMicroseconds>`_\ ()
-
-
+-  :ref:`millis() <lang-millis>`
+-  :ref:`delay() <lang-delay>`
+-  :ref:`delayMicroseconds() <lang-delaymicroseconds>`
 
 .. include:: cc-attribution.txt