diff options
Diffstat (limited to 'docs/source/lang/api')
39 files changed, 251 insertions, 303 deletions
diff --git a/docs/source/lang/api/abs.rst b/docs/source/lang/api/abs.rst index 0cc6c23..d9f1ca3 100644 --- a/docs/source/lang/api/abs.rst +++ b/docs/source/lang/api/abs.rst @@ -45,5 +45,4 @@ Arduino Compatibility Maple's implementation of ``abs()`` is compatible with Arduino. - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/analogread.rst b/docs/source/lang/api/analogread.rst index 7099b69..6665a94 100644 --- a/docs/source/lang/api/analogread.rst +++ b/docs/source/lang/api/analogread.rst @@ -20,32 +20,33 @@ Library Documentation Discussion ---------- -Reads the value from the specified analog pin. The Maple board -contains a 16-channel, 12-bit analog to digital converter. This means -that it will map input voltages between 0 and 3.3 volts into integer -values between 0 and 4095. This yields a resolution between readings -of 3.3V / 4096 units, or 0.8 millivolts. However, a number of factors +Reads the value from the specified analog pin. The Maple boards +contain 16-channel, 12-bit analog to digital converters. This means +that a converter will map input voltages between 0 and 3.3 volts into +integer values between 0 and 4095. However, a number of factors interfere with getting full accuracy and precision. For more information, see :ref:`adc`. Before calling analogRead() on a pin, that pin must first be -configured for analog input, using :ref:`lang-pinMode` (you only -have to do this once, so it's usually done in :ref:`lang-setup`\ ). +configured for analog input, using :ref:`lang-pinMode`. You only have +to do this once, so it's usually done in :ref:`lang-setup`\ . Parameter Discussion -------------------- -.. FIXME generalize Maple-specific information - The pin parameter is the number of the analog input pin to read from. -Header pins on the Maple with ADC functionality (marked as "AIN" on -the silkscreen) are: - - 0, 1, 2, 3, 10, 11, 12, 13, 15, 16, 17, 18, 19, 20, 27, 28 - -Note that pins 3, 27, and 28 are not marked AIN on the silkscreen -for Maple revisions through Rev 5, however, they **do work** as -analog input pins. +The pins which support analog to digital conversion have ``AIN`` +listed underneath their number on your board's silkscreen. These pin +numbers are available to your program in the :ref:`boardADCPins +<lang-board-values-adc-pins>` board-specific array. The number of +pins which are capable of analog to digital conversion on your board +is given by the ``BOARD_NR_ADC_PINS`` constant. These values are +documented for each board in the :ref:`Board Hardware Documentation +<index-boards>` pages. + +.. note:: Pin 3 is not marked ``AIN`` on the silkscreen for Maple + revisions through Rev 5; however **it does work** as an analog + input pin. Note ---- @@ -55,7 +56,6 @@ returned by ``analogRead()`` will fluctuate due to a number of reasons (like the values of the other analog inputs, how close your hand is to the board, etc.) in a "random" way. - Example ------- @@ -78,7 +78,6 @@ Example // a serial monitor } - Arduino Compatibility --------------------- @@ -100,27 +99,21 @@ shift <lang-bitshift>` the value of a Maple readout by 2, like so:: // be aware that you're losing a lot of precision if you do this int adc_reading = analogRead(pin) >> 2; -.. FIXME Mention Native can do analogReference(), when it's time +.. FIXME [0.1.0] Mention that Native can do analogReference() On the Arduino, the input range and resolution can be changed using -their implementation of `analogReference() -<http://arduino.cc/en/Reference/AnalogReference>`_\ . Because of the -way its hardware (as of Rev 5) was designed, it's not possible to -implement analogReference on the Maple, so this function doesn't -exist. If your inputs lie in a different voltage range than 0V--3.3V, -you'll need to bring them into that range before using -``analogRead()``. Some basic tools to accomplish this are `resistor -dividers <http://en.wikipedia.org/wiki/Voltage_divider>`_ and `Zener -diodes -<http://en.wikipedia.org/wiki/Voltage_source#Zener_voltage_source>`_\ -. However, `operational amplifiers -<http://en.wikipedia.org/wiki/Operational_amplifier>`_ and other -powered components can also be used if greater precision is required. - -See also +the `analogReference() +<http://arduino.cc/en/Reference/AnalogReference>`_ function. Because +of hardware restrictions, this function is not available on the Maple +and Maple RET6 Edition. If your inputs lie in a different voltage +range than 0V--3.3V, you'll need to bring them into that range before +using ``analogRead()``. See the :ref:`ADC reference <adc-range>` for +more information. + +See Also -------- - :ref:`ADC tutorial <adc>` - `(Arduino) Tutorial: Analog Input Pins <http://arduino.cc/en/Tutorial/AnalogInputPins>`_ -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/analogwrite.rst b/docs/source/lang/api/analogwrite.rst index 9147b96..e789305 100644 --- a/docs/source/lang/api/analogwrite.rst +++ b/docs/source/lang/api/analogwrite.rst @@ -65,12 +65,12 @@ This will convert values in the range 0-255 to values in the range which control PWM output. See the :ref:`timers reference <timers>` for more information. -Another fix is to consult the :ref:`pin mapping mega table -<pin-mapping-mega-table>` to find the timer which controls PWM on the -pin you're using, then set that Timer's overflow to 255. Subsequent -calls to analogWrite() should work as on the Arduino (with the same -loss of precision). Note, however, that that affects the overflow for -the **entire timer**, so other code relying on that timer (such as any +Another fix is to consult your board's :ref:`pin maps <gpio-pin-maps>` +to find the timer which controls PWM on the pin you're using, then set +that Timer's overflow to 255. Subsequent calls to analogWrite() +should work as on the Arduino (with the same loss of precision). +Note, however, that that affects the overflow for the **entire +timer**, so other code relying on that timer (such as any :ref:`interrupts <lang-attachinterrupt>` the timer controls) will likely need to be modified as well. @@ -140,9 +140,9 @@ If your application definitely requires Arduino's PWM frequency, then the steps are: 1. Figure out which :ref:`timer <lang-hardwaretimer>` controls PWM - output on your pin (\ :ref:`this table <pwm-timer-table>` is your - friend here). Let's say it's ``Timern``\ , where ``n`` is some - number 1, 2, 3, or 4. + output on your pin (\ :ref:`your board's Timer Pin Map + <gpio-pin-maps>` is your friend here). Let's say it's ``Timern``\ + , where ``n`` is some number 1, 2, 3, or 4. 2. Call ``Timern.setPeriod(2041)``\ . This will set the timer's period to approximately 2041 microseconds, which is a frequency of @@ -154,7 +154,7 @@ timer. The important examples are :ref:`timer interrupts <lang-hardwaretimer-attachinterrupt>` and :ref:`PWM <timers-pwm-conflicts>`\ . -See also +See Also -------- - :ref:`Maple PWM tutorial <pwm>` @@ -169,5 +169,4 @@ See also Maple uses 2 bytes of memory, and an unsigned (i.e., nonnegative) integer with size 2 bytes can hold the values between 0 and 65,535. - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/attachinterrupt.rst b/docs/source/lang/api/attachinterrupt.rst index 7c5a6c7..39902ac 100644 --- a/docs/source/lang/api/attachinterrupt.rst +++ b/docs/source/lang/api/attachinterrupt.rst @@ -5,9 +5,8 @@ attachInterrupt() ================= -Used to specify a function to call when an external interrupt (like an -GPIO changing from LOW to HIGH, a button getting pressed, etc.) -occurs. +Used to specify a function to call when an :ref:`external interrupt +<external-interrupts>` occurs. .. contents:: Contents :local: @@ -15,9 +14,9 @@ occurs. Library Documentation --------------------- -.. FIXME once breathe knows how to get the correct attachInterupt -.. (right now it's copying from HardwareTimer), replace with a -.. doxygenfunction directive +.. FIXME [doxygenfunction] once Breathe knows how to get the correct +.. attachInterupt (right now it's copying from HardwareTimer), replace +.. with a doxygenfunction directive .. cpp:function:: void attachInterrupt(uint8 pin, voidFuncPtr handler, ExtIntTriggerMode mode) @@ -47,49 +46,29 @@ Discussion Because the function will run in interrupt context, inside of it, :ref:`lang-delay` won't work, and the value returned by -:ref:`lang-millis` will not increment. Serial data received while -in the function may be lost. You should declare as ``volatile`` any +:ref:`lang-millis` will not increment. Serial data received while in +the function may be lost. You should declare as ``volatile`` any global variables that you modify within the attached function. -There are a few constraints you should be aware of if you're using -more than one interrupt at a time; the :ref:`external-interrupts` page -has the details. - -Using Interrupts ----------------- - -Interrupts are useful for making things happen automatically in -microcontroller programs, and can help solve timing problems. A -good task for using an interrupt might be reading a rotary encoder, -or monitoring user input. - -If you wanted to insure that a program always caught the pulses -from a rotary encoder, never missing a pulse, it would make it very -tricky to write a program to do anything else, because the program -would need to constantly poll the sensor lines for the encoder, in -order to catch pulses when they occurred. Other sensors have a -similar interface dynamic too, such as trying to read a sound -sensor that is trying to catch a click, or an infrared slot sensor -(photo-interrupter) trying to catch a coin drop. In all of these -situations, using an interrupt can free the microcontroller to get -some other work done while not missing the doorbell. +There are a few limits you should be aware of if you're using more +than one interrupt at a time; the :ref:`External Interrupts +<external-interrupts-exti-line>` page has more information. Example ------- -:: + :: - int maple_led_pin = 13; volatile int state = LOW; // must declare volatile, since it's - // modified within the blink handler + // modified within the blink() handler void setup() { - pinMode(maple_led_pin, OUTPUT); + pinMode(BOARD_LED_PIN, OUTPUT); attachInterrupt(0, blink, CHANGE); } void loop() { - digitalWrite(maple_led_pin, state); + digitalWrite(BOARD_LED_PIN, state); } void blink() { @@ -106,10 +85,10 @@ additional four: numbers 2 (pin 21), 3 (pin 20), 4 (pin 19), and 5 number goes with which pin -- just tell ``attachInterrupt()`` the pin you want. -See also +See Also -------- -- :ref:`detachInterrupt <lang-detachinterrupt>` -- :ref:`external-interrupts` +- :ref:`lang-detachinterrupt` +- :ref:`external-interrupts` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/bit.rst b/docs/source/lang/api/bit.rst index dd5c050..3df042c 100644 --- a/docs/source/lang/api/bit.rst +++ b/docs/source/lang/api/bit.rst @@ -12,33 +12,27 @@ Syntax ``bit(n)`` - Parameters ---------- * **n** the bit to set. - Value ----- The value of an integer with the given bit set. - Arduino Compatibility --------------------- -The Maple implementation of bit is compatible with Arduino. +The Maple implementation of ``bit()`` is compatible with Arduino. - -See also +See Also -------- - - :ref:`lang-bitread` - :ref:`lang-bitwrite` - :ref:`lang-bitset` - :ref:`lang-bitclear` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/bitclear.rst b/docs/source/lang/api/bitclear.rst index 941f912..f487059 100644 --- a/docs/source/lang/api/bitclear.rst +++ b/docs/source/lang/api/bitclear.rst @@ -10,7 +10,6 @@ Syntax ``bitClear(x, n)`` - Parameters ---------- @@ -19,20 +18,17 @@ Parameters * **n** which bit to clear, starting at 0 for the least-significant (rightmost) bit - Returns ------- -None. - +Nothing. Arduino Compatibility --------------------- -This implementation is compatible with that of Arduino. +The Maple implementation of ``bitClear()`` is compatible with Arduino. - -See also +See Also -------- - :ref:`bit <lang-bit>`\ () @@ -40,5 +36,4 @@ See also - :ref:`bitWrite <lang-bitwrite>`\ () - :ref:`bitSet <lang-bitset>`\ () - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/bitread.rst b/docs/source/lang/api/bitread.rst index 46b4478..fd9fbbe 100644 --- a/docs/source/lang/api/bitread.rst +++ b/docs/source/lang/api/bitread.rst @@ -5,13 +5,11 @@ bitRead() (Macro) Gets the value of a bit in a number. - Syntax ------ ``bitRead(x, n)`` - Parameters ---------- @@ -20,27 +18,22 @@ Parameters * **n** which bit to read, starting at 0 for the least-significant (rightmost) bit - Value ----- The value of the bit (0 or 1). - Arduino Compatibility --------------------- The Maple implementation of ``bitRead`` is compatible with Arduino. - -See also +See Also -------- - - :ref:`lang-bit` - :ref:`lang-bitwrite` - :ref:`lang-bitset` - :ref:`lang-bitclear` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/bitset.rst b/docs/source/lang/api/bitset.rst index ccd76de..83ab5f8 100644 --- a/docs/source/lang/api/bitset.rst +++ b/docs/source/lang/api/bitset.rst @@ -5,13 +5,11 @@ bitSet() (Macro) Sets (writes a 1 to) a bit of a numeric variable. - Syntax ------ ``bitSet(x, n)`` - Parameters ---------- @@ -20,19 +18,16 @@ Parameters * **n** which bit to set, starting at 0 for the least-significant (rightmost) bit - Value ----- None. - Arduino Compatibility --------------------- The Maple implementation of bitSet is compatible with Arduino. - See Also -------- @@ -41,6 +36,4 @@ See Also - :ref:`lang-bitwrite` - :ref:`lang-bitclear` - - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/bitwrite.rst b/docs/source/lang/api/bitwrite.rst index b3feff2..6106545 100644 --- a/docs/source/lang/api/bitwrite.rst +++ b/docs/source/lang/api/bitwrite.rst @@ -32,9 +32,9 @@ Nothing. Arduino Compatibility --------------------- -Maple's version of ``bitWrite()`` is compatible with Arduino. +Maple's implementation of ``bitWrite()`` is compatible with Arduino. -See also +See Also -------- - :ref:`bit() <lang-bit>` @@ -42,5 +42,4 @@ See also - :ref:`bitSet() <lang-bitSet>` - :ref:`bitClear() <lang-bitClear>` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/board-values.rst b/docs/source/lang/api/board-values.rst index e274163..05e3837 100644 --- a/docs/source/lang/api/board-values.rst +++ b/docs/source/lang/api/board-values.rst @@ -12,6 +12,9 @@ it easier to share your code with other people who have different boards. Some example usages are given :ref:`below <lang-board-values-examples>`. +The actual values for each board are given in the :ref:`Board Hardware +Documentation <index-boards>`. + .. contents:: Contents :local: @@ -111,8 +114,6 @@ Pin Arrays Some :ref:`arrays <lang-array>` of pin numbers are available which you can use to find out certain important information about a given pin. -.. TODO [0.1.0] links to board-specific hardware information - - ``boardPWMPins``: Pin numbers of each pin capable of :ref:`PWM <pwm>` output, using :ref:`pwmWrite() <lang-pwmwrite>`. The total number of these pins is :ref:`BOARD_NR_PWM_PINS diff --git a/docs/source/lang/api/cc-attribution.txt b/docs/source/lang/api/cc-attribution.txt deleted file mode 100644 index e100140..0000000 --- a/docs/source/lang/api/cc-attribution.txt +++ /dev/null @@ -1,9 +0,0 @@ -.. Included in all this directory's files in order to satisfy the -.. Arduino CC Attribution-ShareAlike 3.0 License - -.. admonition:: License and Attribution - - This documentation page was adapted from the `Arduino Reference - Documentation <http://arduino.cc/en/Reference/HomePage>`_\ , which - is released under a `Creative Commons Attribution-ShareAlike 3.0 - License <http://creativecommons.org/licenses/by-sa/3.0/>`_. diff --git a/docs/source/lang/api/constants.rst b/docs/source/lang/api/constants.rst index c5a7c0c..00c1a5c 100644 --- a/docs/source/lang/api/constants.rst +++ b/docs/source/lang/api/constants.rst @@ -320,4 +320,4 @@ See Also - :ref:`double <lang-double>` - :ref:`Board-Specific Values <lang-board-values>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/constrain.rst b/docs/source/lang/api/constrain.rst index d19b61c..28af1e3 100644 --- a/docs/source/lang/api/constrain.rst +++ b/docs/source/lang/api/constrain.rst @@ -59,11 +59,10 @@ Arduino Compatibility Maple's implementation of ``constrain()`` is compatible with Arduino. -See also +See Also -------- - :ref:`min() <lang-min>` - :ref:`max() <lang-max>` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/cos.rst b/docs/source/lang/api/cos.rst index 3fbb0af..c340f09 100644 --- a/docs/source/lang/api/cos.rst +++ b/docs/source/lang/api/cos.rst @@ -19,14 +19,12 @@ Note that the Maple implementation comes from `newlib <http://sourceware.org/newlib/>`_\ , while Arduino's is that of `avr-libc <http://avr-libc.nongnu.org/>`_\ . -See also +See Also -------- - - :ref:`sin() <lang-sin>` - :ref:`tan() <lang-tan>` - :ref:`float <lang-float>` - :ref:`double <lang-double>` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/delay.rst b/docs/source/lang/api/delay.rst index 90ca268..9ef06a0 100644 --- a/docs/source/lang/api/delay.rst +++ b/docs/source/lang/api/delay.rst @@ -57,10 +57,9 @@ Example .. _lang-delay-seealso: -See also +See Also -------- - - :ref:`millis() <lang-millis>` - :ref:`micros() <lang-micros>` - :ref:`delayMicroseconds() <lang-delayMicroseconds>` @@ -68,5 +67,4 @@ See also <http://arduino.cc/en/Tutorial/BlinkWithoutDelay>`_ example (works unmodified on Maple) - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/delaymicroseconds.rst b/docs/source/lang/api/delaymicroseconds.rst index 24a8286..7078660 100644 --- a/docs/source/lang/api/delaymicroseconds.rst +++ b/docs/source/lang/api/delaymicroseconds.rst @@ -48,9 +48,9 @@ Arduino Compatibility --------------------- While we have made every effort we could to ensure that the timing of -delayMicroseconds is as accurate as possible, we cannot guarantee it -will behave as the Arduino implementation down to the microsecond, -especially for smaller values of ``us``. +``delayMicroseconds()`` is as accurate as possible, we cannot +guarantee it will behave as the Arduino implementation down to the +microsecond, especially for smaller values of ``us``. See Also -------- @@ -59,7 +59,4 @@ See Also - :ref:`micros <lang-micros>` - :ref:`delay <lang-delay>` - - - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/detachinterrupt.rst b/docs/source/lang/api/detachinterrupt.rst index 41642a7..82ce974 100644 --- a/docs/source/lang/api/detachinterrupt.rst +++ b/docs/source/lang/api/detachinterrupt.rst @@ -9,9 +9,8 @@ Used to disable an interrupt specified with Library Documentation --------------------- -.. FIXME once breathe knows how to get the correct detachInterupt -.. (right now it's copying from HardwareTimer), replace with a -.. doxygenfunction directive +.. FIXME [Breathe] once we can get the correct detachInterupt(), +.. replace with doxygenfunction. .. cpp:function:: void detachInterrupt(uint8 pin) @@ -39,5 +38,6 @@ See Also -------- - :ref:`attachInterrupt() <lang-attachInterrupt>` +- :ref:`external-interrupts` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/digitalread.rst b/docs/source/lang/api/digitalread.rst index 3502587..ccf4a4c 100644 --- a/docs/source/lang/api/digitalread.rst +++ b/docs/source/lang/api/digitalread.rst @@ -8,51 +8,44 @@ digitalRead() Reads the value from a specified digital pin, either :ref:`HIGH <lang-constants-high>` or :ref:`LOW <lang-constants-low>`. - Library Documentation --------------------- .. doxygenfunction:: digitalRead +Discussion +---------- + +If the pin isn't connected to anything, ``digitalRead()`` can return +either HIGH or LOW (and this will change in a way that seems random). Example ------- -The following example turns the LED on when the button is pressed:: - - int ledPin = 13; // LED connected to Maple pin 13 - int buttonPin = 38; // BUT connected to Maple pin 38 +The following example turns the LED on or off when the button is pressed:: void setup() { - pinMode(ledPin, OUTPUT); - pinMode(buttonPin, INPUT); + pinMode(BOARD_LED_PIN, OUTPUT); + pinMode(BOARD_BUTTON_PIN, INPUT); } void loop() { - int val = digitalRead(buttonPin); // reads the input pin - digitalWrite(ledPin, val); + int val = digitalRead(BOARD_BUTTON_PIN); // reads the input pin + togglePin(BOARD_LED_PIN, val); } -Note ----- - -If the pin isn't connected to anything, ``digitalRead()`` can return -either HIGH or LOW (and this can change in a way that seems random). - Arduino Compatibility --------------------- The Maple version of ``digitalRead()`` is compatible with Arduino. - See Also -------- -- :ref:`pinMode <lang-pinMode>` -- :ref:`digitalWrite <lang-digitalWrite>` - - - - +- :ref:`BOARD_BUTTON_PIN <lang-board-values-but>` +- :ref:`lang-isButtonPressed` +- :ref:`lang-pinmode` +- :ref:`lang-digitalWrite` +- :ref:`lang-togglepin` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/digitalwrite.rst b/docs/source/lang/api/digitalwrite.rst index 6124d5f..376cbc3 100644 --- a/docs/source/lang/api/digitalwrite.rst +++ b/docs/source/lang/api/digitalwrite.rst @@ -21,42 +21,26 @@ If the pin has been configured as an ``OUTPUT`` with :ref:`pinMode() <lang-pinmode>` its voltage will be set to the corresponding value: 3.3V for ``HIGH``, and 0V (ground) for ``LOW``. -.. TODO make the following paragraphs true, but refer the reader to -.. INPUT_PULLUP and INPUT_PULLDOWN: - -If the pin is configured as an ``INPUT``, writing a ``HIGH`` value -with ``digitalWrite()`` will enable an internal pullup resistor. -Writing ``LOW`` will disable the pullup. The pullup resistor is enough -to light an LED dimly, so if LEDs appear to work, but very dimly, this -is a likely cause. The remedy is to set the pin to an output with the -:ref:`pinMode() <lang-pinmode>` function. - -.. note:: Pin 13 is harder to use as an input than the other pins - because it has an LED and resistor soldered to it in series. If you - enable its internal pull-up resistor, it will likely hang at around - 1.1V instead of the expected 3.3V because the onboard LED and - series resistor pull the voltage level down. If you must use pin 13 - as a digital input, use an external pull-down resistor. +Because it is soldered to an LED and resistor in series, your board's +:ref:`BOARD_LED_PIN <lang-board-values-led>` will respond slightly +more slowly as an output than the other pins. Example ------- The following example sets pin 13 to ``HIGH``, makes a one-second-long delay, sets the pin back to ``LOW``, and delays again, causing a -blinking pattern:: - - - int ledPin = 13; // LED connected to digital pin 13 +blinking pattern (you could also use :ref:`lang-toggleled`):: void setup() { - pinMode(ledPin, OUTPUT); // sets the digital pin as output + pinMode(BOARD_LED_PIN, OUTPUT); // sets the digital pin as output } void loop() { - digitalWrite(ledPin, HIGH); // sets the LED on - delay(1000); // waits for a second - digitalWrite(ledPin, LOW); // sets the LED off - delay(1000); // waits for a second + digitalWrite(BOARD_LED_PIN, HIGH); // sets the LED on + delay(1000); // waits for a second + digitalWrite(BOARD_LED_PIN, LOW); // sets the LED off + delay(1000); // waits for a second } See Also @@ -64,5 +48,8 @@ See Also - :ref:`pinMode <lang-pinmode>` - :ref:`digitalRead <lang-digitalread>` +- :ref:`BOARD_LED_PIN <lang-board-values-led>` +- :ref:`lang-toggleled` +- :ref:`lang-togglepin` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/hardwaretimer.rst b/docs/source/lang/api/hardwaretimer.rst index 3f086ca..526beb6 100644 --- a/docs/source/lang/api/hardwaretimer.rst +++ b/docs/source/lang/api/hardwaretimer.rst @@ -10,8 +10,7 @@ built-in timer peripherals. More information on these peripherals (including code examples) is available in the :ref:`timers reference <timers>`. -.. FIXME update HardwareTimer documentation after redoing it in terms -.. of the new timer interface. +.. FIXME [0.0.10] Updated HardwareTimer documentation, with deprecation .. warning:: This class has been deprecated. It is not available in the current build. @@ -27,8 +26,7 @@ documented below on one of the predefined ``HardwareTimer`` instances. For example, to set the prescale factor on timer 1 to 5, call ``Timer1.setPrescaleFactor(5)``. -.. TODO add code examples that people can copy and paste in case -.. they're unfamiliar with namespace syntax +.. TODO add tutorial-style examples .. cpp:class:: HardwareTimer @@ -92,9 +90,8 @@ For example, to set the prescale factor on timer 1 to 5, call Set the given channel of this timer to the given :ref:`mode <lang-hardwaretimer-modes>`. The parameter ``channel`` is one of 1, 2, 3, and 4, and corresponds to the compare channel you would - like to set. Refer to the full :ref:`pin mapping table - <pin-mapping-mega-table>` to match up timer channels and pin - numbers. + like to set. Refer to your board's :ref:`master pin map + <gpio-pin-maps>` to match up timer channels and pin numbers. .. cpp:function:: void HardwareTimer::setChannel1Mode(TimerMode mode) @@ -377,3 +374,87 @@ different. Other Functions ^^^^^^^^^^^^^^^ .. doxygenfunction:: getTimer + +Examples +^^^^^^^^ + +**LED blink**:: + + #define LED_RATE 500000 // in microseconds; should give 0.5Hz toggles + + void handler_led(void); + + void setup() + { + // Set up the LED to blink + pinMode(BOARD_LED_PIN, OUTPUT); + + // Setup Timer + Timer2.setChannel1Mode(TIMER_OUTPUTCOMPARE); + Timer2.setPeriod(LED_RATE); // in microseconds + Timer2.setCompare1(1); // overflow might be small + Timer2.attachCompare1Interrupt(handler_led); + } + + void loop() { + // Nothing! It's all in the interrupts + } + + void handler_led(void) { + toggleLED(); + } + +**Racing Counters**:: + + void handler_count1(void); + void handler_count2(void); + + int count1 = 0; + int count2 = 0; + + void setup() + { + // Set up BUT for input + pinMode(BOARD_BUTTON_PIN, INPUT_PULLUP); + + // Setup Counting Timers + Timer3.setChannel1Mode(TIMER_OUTPUTCOMPARE); + Timer4.setChannel1Mode(TIMER_OUTPUTCOMPARE); + Timer3.pause(); + Timer4.pause(); + Timer3.setCount(0); + Timer4.setCount(0); + Timer3.setOverflow(30000); + Timer4.setOverflow(30000); + Timer3.setCompare1(1000); // somewhere in the middle + Timer4.setCompare1(1000); + Timer3.attachCompare1Interrupt(handler1); + Timer4.attachCompare1Interrupt(handler2); + Timer3.resume(); + Timer4.resume(); + } + + void loop() { + // Display the running counts + SerialUSB.print("Count 1: "); + SerialUSB.print(count1); + SerialUSB.print("\t\tCount 2: "); + SerialUSB.println(count2); + + // Run... while BUT is held, pause Count2 + for(int i = 0; i<1000; i++) { + if(digitalRead(BOARD_BUTTON_PIN)) { + Timer4.pause(); + } else { + Timer4.resume(); + } + delay(1); + } + } + + void handler1(void) { + count1++; + } + void handler2(void) { + count2++; + } diff --git a/docs/source/lang/api/highbyte.rst b/docs/source/lang/api/highbyte.rst index 50a1fa6..4cb6f9b 100644 --- a/docs/source/lang/api/highbyte.rst +++ b/docs/source/lang/api/highbyte.rst @@ -52,8 +52,4 @@ See Also - :ref:`lowByte() <lang-lowbyte>` - - - - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/loop.rst b/docs/source/lang/api/loop.rst index d8f6183..c2a5097 100644 --- a/docs/source/lang/api/loop.rst +++ b/docs/source/lang/api/loop.rst @@ -15,7 +15,6 @@ Example :: - int buttonPin = 38; // setup initializes serial and the button pin @@ -42,4 +41,4 @@ See Also - :ref:`setup() <lang-setup>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/lowbyte.rst b/docs/source/lang/api/lowbyte.rst index 58e622f..c513711 100644 --- a/docs/source/lang/api/lowbyte.rst +++ b/docs/source/lang/api/lowbyte.rst @@ -22,4 +22,4 @@ Returns The low byte's value (this will be between 0 and 255). -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/map.rst b/docs/source/lang/api/map.rst index 79122b3..69661a0 100644 --- a/docs/source/lang/api/map.rst +++ b/docs/source/lang/api/map.rst @@ -65,4 +65,4 @@ See Also - :ref:`constrain() <lang-constrain>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/max.rst b/docs/source/lang/api/max.rst index d38eebe..d356f08 100644 --- a/docs/source/lang/api/max.rst +++ b/docs/source/lang/api/max.rst @@ -53,7 +53,7 @@ functions inside the parentheses. It may lead to incorrect results:: Arduino Compatibility --------------------- -The Maple version of ``max()`` is compatible with Arduino. +The Maple implementation of ``max()`` is compatible with Arduino. See Also -------- @@ -61,5 +61,4 @@ See Also - :ref:`min() <lang-min>` - :ref:`constrain() <lang-constrain>` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/micros.rst b/docs/source/lang/api/micros.rst index f12976b..de85303 100644 --- a/docs/source/lang/api/micros.rst +++ b/docs/source/lang/api/micros.rst @@ -43,4 +43,4 @@ See Also - :ref:`delay() <lang-delay>` - :ref:`delayMicroseconds() <lang-delaymicroseconds>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/millis.rst b/docs/source/lang/api/millis.rst index 0288c56..db0531c 100644 --- a/docs/source/lang/api/millis.rst +++ b/docs/source/lang/api/millis.rst @@ -49,4 +49,4 @@ See Also - :ref:`delay <lang-delay>` - :ref:`delayMicroseconds <lang-delaymicroseconds>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/min.rst b/docs/source/lang/api/min.rst index 1245f6f..3307105 100644 --- a/docs/source/lang/api/min.rst +++ b/docs/source/lang/api/min.rst @@ -62,5 +62,4 @@ See Also - :ref:`max() <lang-max>` - :ref:`constrain() <lang-constrain>` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/pinmode.rst b/docs/source/lang/api/pinmode.rst index 03cbcfa..8cee3e5 100644 --- a/docs/source/lang/api/pinmode.rst +++ b/docs/source/lang/api/pinmode.rst @@ -60,13 +60,13 @@ set up a pin for these purposes before a call to, e.g., :ref:`lang-analogRead`. In practice, this should only add a few lines to your :ref:`lang-setup` function. -.. TODO verify following before putting it in: +.. TODO [0.1.0] verify following before putting it in: .. ``OUTPUT_OPEN_DRAIN``, ``INPUT_PULLUP``, ``INPUT_PULLDOWN``, and .. ``PWM_OPEN_DRAIN`` modes represent functionality not currently .. available on Arduino boards. -See also +See Also -------- - :ref:`lang-constants` @@ -74,6 +74,4 @@ See also - :ref:`lang-digitalread` - Maple :ref:`GPIO <gpio>` reference page - - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/pow.rst b/docs/source/lang/api/pow.rst index 4280400..219a866 100644 --- a/docs/source/lang/api/pow.rst +++ b/docs/source/lang/api/pow.rst @@ -10,8 +10,6 @@ Library Documentation .. doxygenfunction:: pow -.. TODO LATER some examples - See Also -------- @@ -19,5 +17,4 @@ See Also - :ref:`float <lang-float>` - :ref:`double <lang-double>` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/pwmwrite.rst b/docs/source/lang/api/pwmwrite.rst index cea602b..5cc112e 100644 --- a/docs/source/lang/api/pwmwrite.rst +++ b/docs/source/lang/api/pwmwrite.rst @@ -11,10 +11,13 @@ pwmWrite(), the pin will output a steady square wave with the given duty cycle. You can change the duty cycle later by calling pwmWrite() again with the same pin and a different duty. -.. FIXME board-specific information - -On the Maple, the pins which support PWM are: 0, 1, 2, 3, 5, 6, 7, 8, -9, 11, 12, 14, 24, 27, and 28. +The pins which support PWM have ``PWM`` listed underneath their number +on your board's silkscreen. These pin numbers are available to your +program in the :ref:`boardPWMPins <lang-board-values-pwm-pins>` +board-specific array. The number of pins which are capable of PWM on +your board is given by the ``BOARD_NR_PWM_PINS`` constant. These +values are documented for each board in the :ref:`Board Hardware +Documentation <index-boards>` pages. The Arduino function :ref:`analogWrite() <lang-analogwrite>` is an alias for ``pwmWrite()``, but it is badly named, and its use is @@ -54,4 +57,5 @@ potentiometer:: See Also -------- -- :ref:`Maple PWM tutorial <pwm>` +- :ref:`Maple PWM tutorial <pwm>` +- :ref:`boardPWMPins <lang-board-values-pwm-pins>` diff --git a/docs/source/lang/api/random.rst b/docs/source/lang/api/random.rst index dd8871d..9875ee6 100644 --- a/docs/source/lang/api/random.rst +++ b/docs/source/lang/api/random.rst @@ -10,9 +10,7 @@ The ``random()`` function generates pseudo-random numbers. Library Documentation --------------------- -.. FIXME keep tracking Sphinx/Breathe's ability to reference -.. overloaded functions so we can use doxygenfunction instead of -.. manually documenting. +.. FIXME [Breathe] use doxygenfunction when possible .. cpp:function:: random(long max) @@ -70,4 +68,4 @@ See Also - :ref:`randomSeed() <lang-randomseed>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/randomseed.rst b/docs/source/lang/api/randomseed.rst index d0a15b7..ca7b75f 100644 --- a/docs/source/lang/api/randomseed.rst +++ b/docs/source/lang/api/randomseed.rst @@ -57,4 +57,4 @@ See Also - :ref:`random() <lang-random>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/serial.rst b/docs/source/lang/api/serial.rst index 417063d..0821f43 100644 --- a/docs/source/lang/api/serial.rst +++ b/docs/source/lang/api/serial.rst @@ -12,49 +12,20 @@ devices. Introduction ------------ -.. FIXME [Maple-specific values] -.. FIXME [0.0.10] Serial4, Serial5 updates for high-density devices +.. FIXME [0.0.10] UART4, UART5 -The Maple has three serial ports (also known as a UARTs or USARTs): -``Serial1``, ``Serial2``, and ``Serial3``. They communicate using the -pins summarized in the following table: - -.. list-table:: - :header-rows: 1 - - * - Serial port - - TX, RX, CK - - CTS, RTS (if present) - - * - ``Serial1`` - - 7, 8, 6 - - - - * - ``Serial2`` - - 1, 0, 10 - - 2, 3 - - * - ``Serial3`` - - 29, 30, 31 - - 32, 33 - -Thus, if you use a particular serial port, you cannot also use its -communication pins for other purposes at the same time. - -If you want to communicate with the Maple using the provided USB port, -use :ref:`SerialUSB <lang-serialusb>` instead. - -To use them to communicate with an external TTL serial device, connect -the TX pin to your device's RX pin, the RX to your device's TX pin, -and the ground of your Maple to your device's ground. +To use a serial port to communicate with an external serial device, +connect the TX pin to your device's RX pin, the RX to your device's TX +pin, and your Maple board's ground to your device's ground. .. warning:: Don't connect these pins directly to an RS232 serial port; they operate at +/- 12V and can damage your board. - Library Documentation --------------------- +.. FIXME [0.1.0] Tutorial-style usage introduction + All of the ``Serial[1,2,3]`` objects are instances of the ``HardwareSerial`` class, which is documented in this section. (This means that you can use any of these functions on any of ``Serial1``, @@ -209,9 +180,10 @@ Arduino Compatibility Note -------------------------- Unlike the Arduino, none of the Maple's serial ports is connected to -the USB port on the Maple board (for that, use :ref:`SerialUSB -<lang-serialusb>`). Thus, to use these pins to communicate with your -personal computer, you will need an additional USB-to-serial adapter. +the USB port on the Maple board. If you want to communicate using the +built-in USB port, use :ref:`SerialUSB <lang-serialusb>` instead. You +will need an additional USB-to-serial adapter to communicate between a +USART and your computer. .. FIXME [0.1.0] port these examples over @@ -226,4 +198,4 @@ personal computer, you will need an additional USB-to-serial adapter. .. - `Serial Call Response <http://arduino.cc/en/Tutorial/SerialCallResponse>`_ .. - `Serial Call Response ASCII <http://arduino.cc/en/Tutorial/SerialCallResponseASCII>`_ -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/setup.rst b/docs/source/lang/api/setup.rst index 837ddd6..1e8e3b8 100644 --- a/docs/source/lang/api/setup.rst +++ b/docs/source/lang/api/setup.rst @@ -26,4 +26,4 @@ Example // ... } -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/sin.rst b/docs/source/lang/api/sin.rst index 398b8f3..3e28c0b 100644 --- a/docs/source/lang/api/sin.rst +++ b/docs/source/lang/api/sin.rst @@ -28,5 +28,4 @@ See Also - :ref:`float <lang-float>` - :ref:`double <lang-double>` - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/sq.rst b/docs/source/lang/api/sq.rst index bd32648..96724d3 100644 --- a/docs/source/lang/api/sq.rst +++ b/docs/source/lang/api/sq.rst @@ -42,5 +42,4 @@ Arduino Compatibility Maple's implementation of ``sq()`` is compatible with Arduino. - -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/tan.rst b/docs/source/lang/api/tan.rst index 4bbe0db..b1aed31 100644 --- a/docs/source/lang/api/tan.rst +++ b/docs/source/lang/api/tan.rst @@ -22,10 +22,9 @@ Note that the Maple implementation comes from `newlib See Also -------- - - :ref:`sin <lang-sin>` - :ref:`cos <lang-cos>` - :ref:`float <lang-float>` - :ref:`double <lang-double>` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt diff --git a/docs/source/lang/api/volatile.rst b/docs/source/lang/api/volatile.rst index 276bb6a..1b72897 100644 --- a/docs/source/lang/api/volatile.rst +++ b/docs/source/lang/api/volatile.rst @@ -24,8 +24,8 @@ for efficiency). A variable should be declared ``volatile`` whenever its value can be changed by something beyond the control of the code section in which it appears, such as an :ref:`external interrupt -<external-interrupts>`. On the Maple, the only place that this is -likely to occur is in sections of code associated with interrupts. +<external-interrupts>`. (The only place that this is likely to occur +in most programs is inside of code called by interrupts). Example ------- @@ -55,11 +55,11 @@ Example } } -See also +See Also -------- - :ref:`External Interrupts <external-interrupts>` - :ref:`lang-attachinterrupt` - :ref:`lang-detachinterrupt` -.. include:: cc-attribution.txt +.. include:: /arduino-cc-attribution.txt |