diff options
Diffstat (limited to 'docs/source/lang/api/hardwarespi.rst')
| -rw-r--r-- | docs/source/lang/api/hardwarespi.rst | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/docs/source/lang/api/hardwarespi.rst b/docs/source/lang/api/hardwarespi.rst new file mode 100644 index 0000000..c71b2c3 --- /dev/null +++ b/docs/source/lang/api/hardwarespi.rst @@ -0,0 +1,152 @@ +.. highlight:: cpp + +.. _lang-hardwarespi: + +HardwareSPI +=========== + +This class is used for creating objects to manage the Maple's built-in +SPI ports. The Maple has two SPI ports. The relevant pins +corresponding to each port's logic signals are documented in the +following table (and on the Maple silkscreen): + +.. _lang-hardwarespi-pinout: + +.. list-table:: + :header-rows: 1 + + * - Port number + - NSS + - MOSI + - MISO + - SCK + + * - 1 + - 10 + - 11 + - 12 + - 13 + + * - 2 + - 31 + - 32 + - 33 + - 34 + +If you use a SPI port, you cannot simultaneously use its associated +pins for other purposes. + +Library Documentation +--------------------- + +HardwareSPI Class Reference +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +You can use the SPI interface by including a declaration ``HardwareSPI +Spi(number);`` at the start of the sketch or program. The ``number`` +must be either 1 or 2 and specifies which port to use. Once this is +done, you can call any of the methods documented here using +``Spi.method(arguments)``; for example, ``Spi.send(0x13)`` would send +the value ``0x13`` into the port buffer to be transmitted as soon as +possible. + +.. cpp:class:: HardwareSPI + + Class for interacting with SPI. + +.. cpp:function:: HardwareSPI::HardwareSPI(uint32 spi_num) + + Construct an object for managing a SPI peripheral. ``spi_num`` + must be 1 or 2; see the :ref:`table above + <lang-hardwarespi-pinout>` for pinout information. + +.. cpp:function:: void HardwareSPI::begin(SPIFrequency freq, uint32 endianness, uint32 mode) + + Configure the baudrate of the given SPI port and set up the header + pins appropriately. + + Parameters: + + - ``freq``: one of the ``SPIFrequency`` values, given :ref:`below + <lang-hardwarespi-spifrequency>`. + + - ``endianness``: either ``LSBFIRST`` (little-endian) or + ``MSBFIRST`` (big-endian). + + - ``mode``: one of 0, 1, 2, or 3, and specifies which SPI mode is + used. The mode number determines a combination of polarity and + phase according to the following table: + + .. list-table:: + :header-rows: 1 + + * - Mode + - Polarity + - Phase + + * - 0 + - 0 + - 0 + + * - 1 + - 0 + - 1 + + * - 2 + - 1 + - 0 + + * - 3 + - 1 + - 1 + + For more information on polarity and phase, see the + :ref:`external references, below <lang-hardwarespi-seealso>`. + +.. cpp:function:: void HardwareSPI::begin() + + A convenience ``begin()``, equivalent to ``begin(SPI_1_125MHZ, + MSBFIRST, 0)``. + +.. cpp:function:: uint8 HardwareSpi::send(uint8 *data, uint32 length) + + Writes ``data`` into the port buffer to be transmitted as soon as + possible, where ``length`` is the number of bytes to send from + ``data``. Returns the last byte shifted back from slave. + +.. cpp:function:: uint8 HardwareSpi::send(uint8 data) + + Writes the single byte ``data`` into the port buffer to be + transmitted as soon as possible. Returns the data byte shifted + back from the slave. + +.. cpp:function:: uint8 HardwareSpi::recv() + + Reads a byte from the peripheral. Returns the next byte in the + buffer. + +SPI Speeds +^^^^^^^^^^ + +.. _lang-hardwarespi-spifrequency: + +The possible SPI speeds are configured using the ``SPIFrequency`` enum: + +.. doxygenenum:: SPIFrequency + +.. _lang-hardwarespi-seealso: + +See Also +-------- + +* `Wikipedia Article on Serial Peripheral Interface Bus (SPI) + <http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus>`_ +* `Arduino reference on SPI + <http://www.arduino.cc/playground/Code/Spi>`_ +* `Hardcore SPI on Arduino <http://klk64.com/arduino-spi/>`_ by kik64 +* STMicro documentation for STM32F103RB microcontroller: + + * `Datasheet <http://www.st.com/stonline/products/literature/ds/13587.pdf>`_ (pdf) + * `Reference Manual <http://www.st.com/stonline/products/literature/rm/13902.pdf>`_ (pdf) + + |