diff options
Diffstat (limited to 'docs/source/jtag.rst')
| -rw-r--r-- | docs/source/jtag.rst | 37 |
1 files changed, 21 insertions, 16 deletions
diff --git a/docs/source/jtag.rst b/docs/source/jtag.rst index 858021e..cc6d34a 100644 --- a/docs/source/jtag.rst +++ b/docs/source/jtag.rst @@ -1,11 +1,12 @@ +.. highlight:: cpp + .. _jtag: ====== JTAG ====== -.. TODO update adapter schematic, add information on using it with our -.. devices. +.. FIXME update adapter schematic, add better information JTAG is an interface for low-level debugging of digital devices. It gives instruction by instruction control over the microprocessor and @@ -37,32 +38,36 @@ Wiring Diagram to connect a standard 20-pin ARM JTAG device to the 8-pin JTAG port on the Maple. -The Maple has holes for a 8-pin JTAG header but that header is not -soldered on by default. If you know ahead of time that you'll be -needing it, and you order `straight from LeafLabs -<http://leaflabs.com/store/>`_, add a comment to your order and we can -probably solder one on for no charge. Otherwise, you can simply -attach standard 0.1" pitch male header pins (either the exact 4x2 -block or two 4-pin pieces of breakaway straight header). For a one-off -usage hack, the header can be jammed in the holes and twisted to -ensure electrical contact. +The Maple has holes for a 8-pin JTAG header, but that header is not +soldered on. To use JTAG, simply solder on standard 0.1" pitch male +header pins (either the exact 4 by 2 block, or two 4-pin pieces of +straight breakaway header). Compatible Devices ------------------ We have had good experience with the `Olimex ARM-USB-OCD <http://www.olimex.com/dev/arm-usb-ocd.html>`_ device, which costs -about 55 euro plus shipping (as of November 2010). +about €55 plus shipping (as of April 2011). + +Function Reference +------------------ + +You can disable or enable the JTAG and Serial Wire debugging ports in +software using the ``disableDebugPorts()`` and ``enableDebugPorts()`` +functions. + +* :ref:`lang-disabledebugports` +* :ref:`lang-enabledebugports` Recommended Reading ------------------- * `Wikipedia Article on Joint Test Action Group (JTAG) <http://en.wikipedia.org/wiki/Joint_Test_Action_Group>`_ -* `STM32/gdb/OpenOCD HOWTO <http://fun-tech.se/stm32/OpenOCD/gdb.php>`_ +* `STM32, GDB, OpenOCD How To <http://fun-tech.se/stm32/OpenOCD/gdb.php>`_ * STMicro documentation for STM32F103RB microcontroller: * `Datasheet <http://www.st.com/stonline/products/literature/ds/13587.pdf>`_ (pdf) * `Reference Manual <http://www.st.com/stonline/products/literature/rm/13902.pdf>`_ (pdf) -* There's a `thread on JTAG - <http://forums.leaflabs.com/topic.php?id=536>`_ in our `forum`_ - which you may find useful. +* `LeafLabs Wiki JTAG How To <http://wiki.leaflabs.com/index.php?title=Maple_JTAG_How_To>`_ +* `Forum thread on JTAG <http://forums.leaflabs.com/topic.php?id=536>`_ |