1 files changed, 0 insertions, 136 deletions
diff --git a/docs/source/ide.rst b/docs/source/ide.rst
deleted file mode 100644
index b3ef653..0000000
--- a/docs/source/ide.rst
+++ /dev/null
@@ -1,136 +0,0 @@
-.. _ide:
-
-Maple IDE
-=========
-
-This page documents the basic functionality of the Maple IDE.
-Specifically, it describes the operation of the buttons on the main
-toolbar.  It is expected to become more comprehensive over time.
-
-The :ref:`Maple Quickstart <maple-quickstart>` is another good source of
-information on the IDE; it is especially useful for setting up a
-computer for the first time.
-
-.. figure:: /_static/img/ide-blinky.png
-   :align: center
-   :alt: Maple IDE
-
-.. _ide-verify:
-
-Verify
-------
-
-.. image:: /_static/img/button-verify.png
-   :align: left
-
-Click Verify to compile the current sketch.
-
-.. _ide-stop:
-
-Stop
-----
-
-.. image:: /_static/img/button-stop.png
-   :align: left
-
-Click Stop to cancel a compilation.
-
-.. _ide-new:
-
-New
----
-
-.. image:: /_static/img/button-new.png
-   :align: left
-
-Click New to begin a fresh sketch.
-
-.. _ide-open:
-
-Open
-----
-
-.. image:: /_static/img/button-open.png
-   :align: left
-
-Click Open to open a new sketch.  By default, this will look in you
-*sketchbook*, which is a directory on your system which contains all
-of your sketches.  The default directory of your sketchbook varies by
-operating system; you can change it in the IDE preferences.
-
-.. _ide-save:
-
-Save
-----
-
-.. image:: /_static/img/button-save.png
-   :align: left
-
-Click Save to save the currently opened sketch.
-
-.. _ide-upload:
-
-Upload
-------
-
-.. image:: /_static/img/button-upload.png
-   :align: left
-
-Click Upload to send the compiled sketch to your Maple to run.  Before
-you click Upload, you must have a memory location and serial port
-selected.  The memory location, either Flash or RAM, determines
-whether the compiled sketch binary will be stored on the Maple.  You
-can choose this using the Tools > Board menu.  The serial port
-corresponds to the Serial-over-USB connection the Maple has
-established with your computer.  This looks like "COM1", "COM2",
-etc. on Windows, "/dev/tty.usbmodemXXX" on Mac (where "XXX" is some
-sequence of letters and numbers), or "/dev/ttyACMXXX" on Linux (again,
-where "XXX" is some sequence of letters and numbers).  You can choose
-a serial port using the Tools > Serial Port menu.
-
-If you click Upload without having made these choices; The IDE
-*should* prompt you to do so.  However, if you're trying to upload and
-are unsuccessful, make sure you've made choices for both board and
-serial port.
-
-For more help, the upload process is documented in more detail (with
-screenshots) in the :ref:`quickstart <maple-quickstart-upload>`.
-
-If all else fails, try putting your Maple in :ref:`perpetual
-bootloader mode <troubleshooting-perpetual-bootloader>` before
-uploading.
-
-In any case, you can always find us on the `forum`_ or `contact us
-directly`_.
-
-.. _ide-serial-monitor:
-
-Serial Monitor
---------------
-
-.. image:: /_static/img/button-serial-monitor.png
-   :align: left
-
-Click Serial Monitor to open up a communications channel between your
-PC and the Maple's :ref:`Serial-over-USB <lang-serialusb>`
-(``SerialUSB``) virtual serial port.
-
-If the serial monitor is open, any information sent to the computer
-(e.g. using :ref:`SerialUSB.println() <lang-serialusb-println>` will
-be displayed in the large text area.  You can send data to the Maple
-(to be read with e.g. :ref:`SerialUSB.read() <lang-serialusb-read>`)
-by typing into the small text box and either hitting the Enter key or
-pressing the Send button.
-
-Here is an example serial monitor session with the InteractiveTest
-sketch (which you can load in the IDE by choosing menu item File >
-Examples > Maple > InteractiveTest):
-
-.. image:: /_static/img/serial-monitor.png
-
-This is the result of typing "?" in the text box and clicking Send.
-
-.. note:: You cannot upload a sketch while the serial monitor is open.
-   If you click :ref:`Upload <ide-upload>` while the serial monitor is
-   open, the IDE will close it for you before proceeding with the
-   upload.