diff options
Diffstat (limited to 'docs/source/hardware/maple-ret6.rst')
| -rw-r--r-- | docs/source/hardware/maple-ret6.rst | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/docs/source/hardware/maple-ret6.rst b/docs/source/hardware/maple-ret6.rst index 1f3a656..d6a7c0e 100644 --- a/docs/source/hardware/maple-ret6.rst +++ b/docs/source/hardware/maple-ret6.rst @@ -279,10 +279,10 @@ This section lists known issues and warnings for the Maple RET6 Edition. the board's built-in LED; this is the same GPIO bit which is connected to the DAC's channel 2 output. -* **Reset and NJTRST tied together**: The MCU's reset pin is tied to - PB4, the NJTRST (JTAG reset) pin, which is pin 43. Thus, attempting - to use pin 43 as a GPIO will reset your board (and also prevents the - JTAG "reset halt" command from working properly). +* **Reset and NJTRST tied together**: The MCU's reset pin is connected + to PB4, the NJTRST (JTAG reset) pin, which is pin 43. Thus, + attempting to use pin 43 as a GPIO will reset your board (and also + prevents the JTAG "reset halt" command from working properly). Recommended Reading ------------------- |