1 files changed, 0 insertions, 130 deletions
diff --git a/docs/source/arduino/integerconstants.rst b/docs/source/arduino/integerconstants.rst
deleted file mode 100644
index d60ed24..0000000
--- a/docs/source/arduino/integerconstants.rst
+++ /dev/null
@@ -1,130 +0,0 @@
-.. _arduino-integerconstants:
-
-Integer Constants
-=================
-
-Integer constants are numbers used directly in a sketch, like
-``123``. By default, these numbers are treated as
-`int <http://arduino.cc/en/Reference/Int>`_'s but you can change
-this with the U and L modifiers (see below).
-
-
-
-Normally, integer constants are treated as base 10 (decimal)
-integers, but special notation (formatters) may be used to enter
-numbers in other bases.
-
-
-
-::
-
-    Base               Example    Formatter        Comment
-    
-    10 (decimal)           123    none
-    
-    2 (binary)        B1111011    leading 'B'      only works with 8 bit values (0 to 255)
-                                                   characters 0-1 valid
-    
-    8 (octal)             0173    leading "0"      characters 0-7 valid       
-    
-    16 (hexadecimal)      0x7B    leading "0x"     characters 0-9, A-F, a-f valid    
-
-
-
-**Decimal** is base 10. This is the common-sense math with which
-you are acquainted. Constants without other prefixes are assumed to
-be in decimal format.
-
-
-
-Example:
-::
-
-    101     // same as 101 decimal   ((1 * 10^2) + (0 * 10^1) + 1)
-
-**Binary** is base two. Only characters 0 and 1 are valid.
-
-
-
-Example:
-::
-
-    B101    // same as 5 decimal   ((1 * 2^2) + (0 * 2^1) + 1)
-
-The binary formatter only works on bytes (8 bits) between 0 (B0)
-and 255 (B11111111). If it is convenient to input an int (16 bits)
-in binary form you can do it a two-step procedure such as:
-
-
-
-::
-
-    myInt = (B11001100 * 256) + B10101010;    // B11001100 is the high byte
-
-
-
-**Octal** is base eight. Only characters 0 through 7 are valid.
-Octal values are indicated by the prefix "0"
-
-
-
-Example:
-
-::
-
-    0101    // same as 65 decimal   ((1 * 8^2) + (0 * 8^1) + 1) 
-
-Warning
-It is possible to generate a hard-to-find bug by (unintentionally)
-including a leading zero before a constant and having the compiler
-unintentionally interpret your constant as octal.
-**Hexadecimal (or hex)** is base sixteen. Valid characters are 0
-through 9 and letters A through F; A has the value 10, B is 11, up
-to F, which is 15. Hex values are indicated by the prefix "0x".
-Note that A-F may be syted in upper or lower case (a-f).
-
-
-
-Example:
-
-::
-
-    0x101   // same as 257 decimal   ((1 * 16^2) + (0 * 16^1) + 1)
-
-
-
-U & L formatters
-----------------
-
-By default, an integer constant is treated as an
-`int <http://arduino.cc/en/Reference/Int>`_ with the attendant
-limitations in values. To specify an integer constant with another
-data type, follow it with:
-
-
-
-
--  a 'u' or 'U' to force the constant into an unsigned data format.
-   Example: ``33u``
--  a 'l' or 'L' to force the constant into a long data format.
-   Example: ``100000L``
--  a 'ul' or 'UL' to force the constant into an unsigned long
-   constant. Example: ``32767ul``
-
-
-
-
-
-See also
---------
-
-
--  `constants <http://arduino.cc/en/Reference/Constants>`_
--  `#define <http://arduino.cc/en/Reference/Define>`_
--  `byte <http://arduino.cc/en/Reference/Byte>`_
--  `int <http://arduino.cc/en/Reference/Int>`_
--  `unsigned int <http://arduino.cc/en/Reference/UnsignedInt>`_
--  `long <http://arduino.cc/en/Reference/Long>`_
--  `unsigned long <http://arduino.cc/en/Reference/UnsignedLong>`_
-
-