diff options
| -rwxr-xr-x | support/scripts/reset.py | 30 |
1 files changed, 16 insertions, 14 deletions
diff --git a/support/scripts/reset.py b/support/scripts/reset.py index 8ab9b9f..2a876d6 100755 --- a/support/scripts/reset.py +++ b/support/scripts/reset.py @@ -1,5 +1,7 @@ #!/usr/bin/env python +from __future__ import print_function + import serial import os import platform @@ -37,12 +39,12 @@ def choose_path(possible_paths): elif len(possible_paths) == 1: return possible_paths[0] else: - print ('Found multiple candidates for the Maple device:') + print('Found multiple candidates for the Maple device:') return choose_among_options(possible_paths) def choose_among_options(options): for (i,p) in enumerate(options): - print ('\t%d. %s' % (i+1, p)) + print('\t%d. %s' % (i+1, p)) prompt = 'Enter a number to select one, or q to quit: ' while True: @@ -63,12 +65,12 @@ plat_sys = platform.system() plat_bits = platform.architecture()[0] if plat_sys == 'Linux': if plat_bits == '64bit': - print ('You appear to be using 64-bit Linux. Let us know if this works.') + print('You are using 64-bit Linux. Let us know if this works.') maple_path = unix_get_maple_path('ttyACM') # fall back on /dev/maple if that doesn't work if maple_path is None: maple_path = '/dev/maple' - print ('Could not find Maple serial port; defaulting to /dev/maple.') + print('Could not find Maple serial port; defaulting to /dev/maple.') elif plat_sys == 'Darwin': maple_path = unix_get_maple_path('tty.usbmodem') elif plat_sys == 'Windows': @@ -78,17 +80,17 @@ else: "the path to the Maple's serial port device file:") if maple_path is None: - print ('Could not find the Maple serial port for reset.', \ - 'Perhaps this is your first upload, or the board is already', \ - 'in bootloader mode.') - print () - print ("If your sketch doesn't upload, try putting your Maple", \ - 'into bootloader mode manually by pressing the RESET button', \ - 'then letting it go and quickly pressing button BUT', \ - '(hold for several seconds).') + print('Could not find the Maple serial port for reset.', + 'Perhaps this is your first upload, or the board is already', + 'in bootloader mode.') + print() + print("If your sketch doesn't upload, try putting your Maple", + 'into bootloader mode manually by pressing the RESET button', + 'then letting it go and quickly pressing button BUT', + '(hold for several seconds).') sys.exit() -print ('Using %s as Maple serial port' % maple_path) +print('Using %s as Maple serial port' % maple_path) try: ser = serial.Serial(maple_path, baudrate=115200, xonxoff=1) @@ -119,6 +121,6 @@ try: ser.close() except Exception as e: - print ('Failed to open serial port %s for reset' % maple_path) + print('Failed to open serial port %s for reset' % maple_path) sys.exit() |