diff options
| -rw-r--r-- | Makefile | 52 |
1 files changed, 26 insertions, 26 deletions
@@ -130,32 +130,32 @@ mrproper: clean help: @echo "" - @echo " libmaple Makefile help" - @echo " ----------------------" - @echo " " - @echo " Programming targets:" - @echo " sketch: Compile for BOARD to MEMORY_TARGET (default)." - @echo " install: Compile and upload code over USB, using Maple bootloader" - @echo " " - @echo " You *must* set BOARD if not compiling for Maple (e.g." - @echo " use BOARD=maple_mini for mini, etc.), and MEMORY_TARGET" - @echo " if not compiling to Flash." - @echo " " - @echo " Valid BOARDs:" - @echo " maple, maple_mini, maple_RET6, maple_native" - @echo " " - @echo " Valid MEMORY_TARGETs (default=flash):" - @echo " ram: Compile sketch code to ram" - @echo " flash: Compile sketch code to flash" - @echo " jtag: Compile sketch code for jtag; overwrites bootloader" - @echo " " - @echo " Other targets:" - @echo " debug: Start OpenOCD gdb server on port 3333, telnet on port 4444" - @echo " clean: Remove all build and object files" - @echo " help: Show this message" - @echo " doxygen: Build Doxygen HTML and XML documentation" - @echo " mrproper: Remove all generated files" - @echo " " + @echo "Basic usage (BOARD defaults to maple):" + @echo " $$ cp your-main.cpp main.cpp" + @echo " $$ make BOARD=your_board" + @echo " $$ make BOARD=your_board install" + @echo "" + @echo "Important targets:" + @echo " sketch: Compile for BOARD to MEMORY_TARGET (default)." + @echo " install: Compile and upload over USB using Maple bootloader" + @echo "" + @echo "You *must* set BOARD if not compiling for Maple (e.g." + @echo "use BOARD=maple_mini for mini, etc.), and MEMORY_TARGET" + @echo "if not compiling to Flash. Run \`$$ make list-boards' for" + @echo "a list of all boards." + @echo "" + @echo "Valid MEMORY_TARGETs (default=flash):" + @echo " ram: Compile to RAM (doesn't touch Flash)" + @echo " flash: Compile to Flash (for Maple bootloader)" + @echo " jtag: Compile for JTAG/SWD upload (overwrites bootloader)" + @echo "" + @echo "Other targets:" + @echo " debug: Start OpenOCD gdb server on port 3333, telnet on port 4444" + @echo " clean: Remove all build and object files" + @echo " help: Show this message" + @echo " doxygen: Build Doxygen HTML and XML documentation" + @echo " mrproper: Remove all generated files" + @echo "" debug: $(OPENOCD_WRAPPER) debug |