diff options
| -rw-r--r-- | libmaple/stm32f2/gpio.c | 157 | ||||
| -rw-r--r-- | libmaple/stm32f2/include/series/gpio.h | 222 | ||||
| -rw-r--r-- | libmaple/stm32f2/rules.mk | 1 |
3 files changed, 380 insertions, 0 deletions
diff --git a/libmaple/stm32f2/gpio.c b/libmaple/stm32f2/gpio.c new file mode 100644 index 0000000..61b71f7 --- /dev/null +++ b/libmaple/stm32f2/gpio.c @@ -0,0 +1,157 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f2/gpio.c + * @brief GPIO support for STM32F2 line. + */ + +#include <libmaple/gpio.h> +#include <libmaple/rcc.h> +#include <libmaple/bitband.h> + +/* + * GPIO devices + */ + +gpio_dev gpioa = { + .regs = GPIOA_BASE, + .clk_id = RCC_GPIOA, +}; +/** GPIO port A device. */ +gpio_dev* const GPIOA = &gpioa; + +gpio_dev gpiob = { + .regs = GPIOB_BASE, + .clk_id = RCC_GPIOB, +}; +/** GPIO port B device. */ +gpio_dev* const GPIOB = &gpiob; + +gpio_dev gpioc = { + .regs = GPIOC_BASE, + .clk_id = RCC_GPIOC, +}; +/** GPIO port C device. */ +gpio_dev* const GPIOC = &gpioc; + +gpio_dev gpiod = { + .regs = GPIOD_BASE, + .clk_id = RCC_GPIOD, +}; +/** GPIO port D device. */ +gpio_dev* const GPIOD = &gpiod; + +gpio_dev gpioe = { + .regs = GPIOE_BASE, + .clk_id = RCC_GPIOE, +}; +/** GPIO port E device. */ +gpio_dev* const GPIOE = &gpioe; + +gpio_dev gpiof = { + .regs = GPIOF_BASE, + .clk_id = RCC_GPIOF, +}; +/** GPIO port F device. */ +gpio_dev* const GPIOF = &gpiof; + +gpio_dev gpiog = { + .regs = GPIOG_BASE, + .clk_id = RCC_GPIOG, +}; +/** GPIO port G device. */ +gpio_dev* const GPIOG = &gpiog; + +gpio_dev gpioh = { + .regs = GPIOG_BASE, + .clk_id = RCC_GPIOH, +}; +/** GPIO port G device. */ +gpio_dev* const GPIOH = &gpioh; + +gpio_dev gpioi = { + .regs = GPIOI_BASE, + .clk_id = RCC_GPIOI, +}; +/** GPIO port G device. */ +gpio_dev* const GPIOI = &gpioi; + +/* + * GPIO routines + */ + +/** + * Initialize and reset all available GPIO devices. + */ +void gpio_init_all(void) { + gpio_init(GPIOA); + gpio_init(GPIOB); + gpio_init(GPIOC); + gpio_init(GPIOD); + gpio_init(GPIOE); + gpio_init(GPIOF); + gpio_init(GPIOG); + gpio_init(GPIOH); + gpio_init(GPIOI); +} + +/** + * @brief Set the mode of a GPIO pin. + * @param dev GPIO device. + * @param pin Pin on the device whose mode to set, 0--15. + * @param mode Mode to set the pin to. + * @param flags Flags to modify basic mode configuration + */ +void gpio_set_modef(gpio_dev *dev, + uint8 pin, + gpio_pin_mode mode, + unsigned flags) { + gpio_reg_map *regs = dev->regs; + unsigned shift = pin * 2; + uint32 tmp; + + /* Mode */ + tmp = regs->MODER; + tmp &= ~(0x3 << shift); + tmp |= mode << shift; + regs->MODER = tmp; + + /* Output type */ + bb_peri_set_bit(®s->OTYPER, pin, flags & 0x1); + + /* Speed */ + tmp = regs->OSPEEDR; + tmp &= ~(0x3 << shift); + tmp |= (flags >> 1) << shift; + regs->OSPEEDR = tmp; + + /* Pull-up/pull-down */ + tmp = regs->PUPDR; + tmp &= ~(0x3 << shift); + tmp |= (flags >> 2) << shift; + regs->PUPDR = tmp; +} diff --git a/libmaple/stm32f2/include/series/gpio.h b/libmaple/stm32f2/include/series/gpio.h new file mode 100644 index 0000000..86ee4aa --- /dev/null +++ b/libmaple/stm32f2/include/series/gpio.h @@ -0,0 +1,222 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file libmaple/stm32f2/gpio.h + * @brief STM32F2 General Purpose I/O (GPIO) header. + */ + +#ifndef _LIBMAPLE_STM32F2_GPIO_H_ +#define _LIBMAPLE_STM32F2_GPIO_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple.h> +#include <libmaple/rcc.h> + +/* + * GPIO register maps and devices + */ + +/** GPIO register map type */ +typedef struct gpio_reg_map { + __io uint32 MODER; /**< Mode register */ + __io uint32 OTYPER; /**< Output type register */ + __io uint32 OSPEEDR; /**< Output speed register */ + __io uint32 PUPDR; /**< Pull-up/pull-down register */ + __io uint32 IDR; /**< Input data register */ + __io uint32 ODR; /**< Output data register */ + __io uint32 BSRR; /**< Bit set/reset register */ + __io uint32 LCKR; /**< Configuration lock register */ + __io uint32 AFRL; /**< Alternate function low register */ + __io uint32 AFRH; /**< Alternate function high register */ +} gpio_reg_map; + +/** GPIO port A register map base pointer */ +#define GPIOA_BASE ((struct gpio_reg_map*)0x40020000) +/** GPIO port B register map base pointer */ +#define GPIOB_BASE ((struct gpio_reg_map*)0x40020400) +/** GPIO port C register map base pointer */ +#define GPIOC_BASE ((struct gpio_reg_map*)0x40020800) +/** GPIO port D register map base pointer */ +#define GPIOD_BASE ((struct gpio_reg_map*)0x40020C00) +/** GPIO port E register map base pointer */ +#define GPIOE_BASE ((struct gpio_reg_map*)0x40021000) +/** GPIO port F register map base pointer */ +#define GPIOF_BASE ((struct gpio_reg_map*)0x40021400) +/** GPIO port G register map base pointer */ +#define GPIOG_BASE ((struct gpio_reg_map*)0x40021800) +/** GPIO port H register map base pointer */ +#define GPIOH_BASE ((struct gpio_reg_map*)0x40021C00) +/** GPIO port I register map base pointer */ +#define GPIOI_BASE ((struct gpio_reg_map*)0x40022000) + +/** GPIO device type */ +typedef struct gpio_dev { + gpio_reg_map *regs; + rcc_clk_id clk_id; +} gpio_dev; + +extern gpio_dev* const GPIOA; +extern gpio_dev gpioa; +extern gpio_dev* const GPIOB; +extern gpio_dev gpiob; +extern gpio_dev* const GPIOC; +extern gpio_dev gpioc; +extern gpio_dev* const GPIOD; +extern gpio_dev gpiod; +extern gpio_dev* const GPIOE; +extern gpio_dev gpioe; +extern gpio_dev* const GPIOF; +extern gpio_dev gpiof; +extern gpio_dev* const GPIOG; +extern gpio_dev gpiog; +extern gpio_dev* const GPIOH; +extern gpio_dev gpioh; +extern gpio_dev* const GPIOI; +extern gpio_dev gpioi; + +/* + * Register bit definitions + * + * Currently, we only provide masks to be used for shifting, rather + * than repeating the same values 16 times. + */ + +/* Mode register */ + +#define GPIO_MODER_INPUT 0x0 +#define GPIO_MODER_OUTPUT 0x1 +#define GPIO_MODER_AF 0x2 +#define GPIO_MODER_ANALOG 0x3 + +/* Output type register */ + +#define GPIO_OTYPER_PP 0x0 +#define GPIO_OTYPER_OD 0x1 + +/* Output speed register */ + +#define GPIO_OSPEEDR_LOW 0x0 +#define GPIO_OSPEEDR_MED 0x1 +#define GPIO_OSPEEDR_FAST 0x2 +#define GPIO_OSPEEDR_HIGH 0x3 + +/* Pull-up/pull-down register */ + +#define GPIO_PUPDR_NOPUPD 0x0 +#define GPIO_PUPDR_PU 0x1 +#define GPIO_PUPDR_PD 0x2 + +/* + * GPIO routines + */ + +/** + * @brief GPIO pin modes + */ +typedef enum gpio_pin_mode { + GPIO_MODE_INPUT = GPIO_MODER_INPUT, /**< Input mode */ + GPIO_MODE_OUTPUT = GPIO_MODER_OUTPUT, /**< Output mode */ + GPIO_MODE_AF = GPIO_MODER_AF, /**< Alternate function mode */ + GPIO_MODE_ANALOG = GPIO_MODER_ANALOG, /**< Analog mode */ +} gpio_pin_mode; + +/** + * @brief Additional flags to be used when setting a pin's mode. + * + * Beyond the basic modes (input, general purpose output, alternate + * function, and analog), there are three parameters that can affect a + * pin's mode: + * + * 1. Output type: push/pull or open-drain. This only has an effect + * for output modes. Choices are: GPIO_MODEF_TYPE_PP (the default) + * and GPIO_MODEF_TYPE_OD. + * + * 2. Output speed: specifies the frequency at which a pin changes + * state. This only has an effect for output modes. Choices are: + * GPIO_MODEF_SPEED_LOW (default), GPIO_MODEF_SPEED_MED, + * GPIO_MODEF_SPEED_FAST, and GPIO_MODEF_SPEED_HIGH. + * + * 3. Push/pull setting: All GPIO pins have weak pull-up and pull-down + * resistors that can be enabled when the pin's mode is + * set. Choices are: GPIO_MODEF_PUPD_NONE (default), + * GPIO_MODEF_PUPD_PU, and GPIO_MODEF_PUPD_PD. + */ +typedef enum gpio_mode_flags { + /* Output type in bit 0 */ + GPIO_MODEF_TYPE_PP = GPIO_OTYPER_PP, /**< Output push/pull (default). + Applies only when the mode + specifies output. */ + GPIO_MODEF_TYPE_OD = GPIO_OTYPER_OD, /**< Output open drain. + Applies only when the mode + specifies output. */ + + /* Speed in bits 2:1 */ + GPIO_MODEF_SPEED_LOW = GPIO_OSPEEDR_LOW << 1, /**< Low speed (default): + 2 MHz. */ + GPIO_MODEF_SPEED_MED = GPIO_OSPEEDR_MED << 1, /**< Medium speed: 25 MHz. */ + GPIO_MODEF_SPEED_FAST = GPIO_OSPEEDR_FAST << 1, /**< Fast speed: 50 MHz. */ + GPIO_MODEF_SPEED_HIGH = GPIO_OSPEEDR_HIGH << 1, /**< High speed: + 100 MHz on 30 pF, + 80 MHz on 15 pF. */ + + /* Pull-up/pull-down in bits 4:3 */ + GPIO_MODEF_PUPD_NONE = GPIO_PUPDR_NOPUPD << 3, /**< No pull-up/pull-down + (default). */ + GPIO_MODEF_PUPD_PU = GPIO_PUPDR_PU << 3, /**< Pull-up */ + GPIO_MODEF_PUPD_PD = GPIO_PUPDR_PD << 3, /**< Pull-down */ +} gpio_mode_flags; + +void gpio_set_modef(gpio_dev *dev, + uint8 pin, + gpio_pin_mode mode, + unsigned flags); + +/** + * @brief Set the mode of a GPIO pin. + * + * Calling this function is equivalent to calling gpio_set_modef(dev, + * pin, mode, GPIO_MODE_SPEED_HIGH). Note that this overrides the + * default speed. + * + * @param dev GPIO device. + * @param pin Pin on the device whose mode to set, 0--15. + * @param mode Mode to set the pin to. + */ +static inline void gpio_set_mode(gpio_dev *dev, + uint8 pin, + gpio_pin_mode mode) { + gpio_set_modef(dev, pin, mode, GPIO_MODEF_SPEED_HIGH); +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f2/rules.mk b/libmaple/stm32f2/rules.mk index a865340..83ab043 100644 --- a/libmaple/stm32f2/rules.mk +++ b/libmaple/stm32f2/rules.mk @@ -10,6 +10,7 @@ CFLAGS_$(d) = -I$(d) $(LIBMAPLE_INCLUDES) $(LIBMAPLE_PRIVATE_INCLUDES) -Wall -We # Local rules and targets sSRCS_$(d) := isrs.S vector_table.S cSRCS_$(d) := rcc.c +cSRCS_$(d) += gpio.c sFILES_$(d) := $(sSRCS_$(d):%=$(d)/%) cFILES_$(d) := $(cSRCS_$(d):%=$(d)/%) |