aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--source/hardware/maple.rst8
1 files changed, 6 insertions, 2 deletions
diff --git a/source/hardware/maple.rst b/source/hardware/maple.rst
index 69c3845..ca2afd7 100644
--- a/source/hardware/maple.rst
+++ b/source/hardware/maple.rst
@@ -108,6 +108,9 @@ board from another source, or you could damage it.
supplied by up to 18 V. We recommend a barrel jack input voltage
**no greater than 12 V**.
+ Rev5s manufactured after Spring 2011 may still have this error on
+ the silk, but it has been marked over.
+
See :ref:`this erratum <maple-barrel-jack>` for more information.
Using the Built-in Battery Charger
@@ -503,9 +506,10 @@ Rev 3
For reference, the button part number is KMR211GLFS and the flux
remover we used is "Precision Electronics Cleaner" from RadioShack,
- which is "Safe on most plastics" and contains Dipropylene glycol
+ which is "Safe on most plastics" and contains: dipropylene glycol
monomethyl ether, hydrotreated heavy naphtha, dipropylene glycol
- methyl ether acetate, and carbon dioxide.
+ methyl ether acetate (say that three times fast!), and carbon
+ dioxide.
* **Resistors on pins 0 and 1**: these header pins, which are RX/TX on
USART2 (:ref:`Serial2 <lang-serial>`), have resistors in-line