aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--libmaple/include/libmaple/stm32.h12
-rw-r--r--libmaple/stm32f1/include/series/stm32.h100
-rw-r--r--libmaple/stm32f2/include/series/stm32.h1
-rw-r--r--support/make/board-includes/maple.mk2
-rw-r--r--support/make/board-includes/maple_RET6.mk2
-rw-r--r--support/make/board-includes/maple_mini.mk2
-rw-r--r--support/make/board-includes/maple_native.mk2
-rw-r--r--support/make/board-includes/olimex_stm32_h103.mk2
-rw-r--r--wirish/stm32f1/boards_setup.cpp2
9 files changed, 84 insertions, 41 deletions
diff --git a/libmaple/include/libmaple/stm32.h b/libmaple/include/libmaple/stm32.h
index d6f3304..d53af3a 100644
--- a/libmaple/include/libmaple/stm32.h
+++ b/libmaple/include/libmaple/stm32.h
@@ -58,9 +58,21 @@ extern "C" {
*
* - STM32_HAVE_FSMC: 1 if the MCU has the FSMC peripheral, and 0
* otherwise.
+ *
+ * - STM32_HAVE_USB: 1 if the MCU has a USB peripheral, and 0
+ * otherwise.
*/
#include <series/stm32.h>
+/* Ensure the series header isn't broken. */
+#if (!defined(STM32_PCLK1) || !defined(STM32_PCLK2) || \
+ !defined(STM32_MCU_SERIES) || !defined(STM32_NR_INTERRUPTS) || \
+ !defined(STM32_NR_GPIO_PORTS) || !defined(STM32_DELAY_US_MULT) || \
+ !defined(STM32_SRAM_END) || !defined(STM32_HAVE_FSMC) || \
+ !defined(STM32_HAVE_USB))
+#error "Bad STM32F1 configuration. Check <series/stm32.h> header for your MCU."
+#endif
+
#ifdef __DOXYGEN_PREDEFINED_HACK
/*
diff --git a/libmaple/stm32f1/include/series/stm32.h b/libmaple/stm32f1/include/series/stm32.h
index c122df0..eaf9287 100644
--- a/libmaple/stm32f1/include/series/stm32.h
+++ b/libmaple/stm32f1/include/series/stm32.h
@@ -38,6 +38,17 @@ extern "C" {
#define STM32_MCU_SERIES STM32_SERIES_F1
+/* The STM32F1 series is subdivided into "lines". libmaple currently
+ * officially supports STM32F103 performance line MCUs (see the
+ * MCU-specific value section below).
+ *
+ * You can use these F1 line defines if porting libmaple to support
+ * MCUs on other lines. */
+#define STM32_F1_LINE_PERFORMANCE 0
+#define STM32_F1_LINE_VALUE 1
+#define STM32_F1_LINE_ACCESS 2
+#define STM32_F1_LINE_CONNECTIVITY 3
+
/*
* MCU-specific values.
*
@@ -48,23 +59,31 @@ extern "C" {
*/
#if defined(MCU_STM32F103RB)
+# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE
# define STM32_NR_GPIO_PORTS 4
# define STM32_SRAM_END ((void*)0x20005000)
+# define STM32_MEDIUM_DENSITY
#elif defined(MCU_STM32F103ZE)
+# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE
# define STM32_NR_GPIO_PORTS 7
# define STM32_SRAM_END ((void*)0x20010000)
+# define STM32_HIGH_DENSITY
#elif defined(MCU_STM32F103CB)
+# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE
/* This STM32_NR_GPIO_PORTS is not strictly true, but only pins 0
* and exist, and they're used for OSC (e.g. on e.g. LeafLabs
* Maple Mini), so we'll live with this for now. */
# define STM32_NR_GPIO_PORTS 3
# define STM32_SRAM_END ((void*)0x20005000)
+# define STM32_MEDIUM_DENSITY
#elif defined(MCU_STM32F103RE)
+# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE
# define STM32_NR_GPIO_PORTS 4
# define STM32_SRAM_END ((void*)0x20010000)
+# define STM32_HIGH_DENSITY
#else
#error "Unrecognized STM32F1 MCU, or no MCU specified. Add something like " \
@@ -72,46 +91,65 @@ extern "C" {
#endif
/*
- * Clock configuration.
+ * Derived values.
*/
-#ifndef STM32_PCLK1
-#define STM32_PCLK1 36000000U
-#endif
+#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE
+ /* All supported performance line MCUs have a USB peripheral */
+# define STM32_HAVE_USB 1
+
+# ifdef STM32_MEDIUM_DENSITY
+# define STM32_NR_INTERRUPTS 43
+# define STM32_HAVE_FSMC 0
+# elif defined(STM32_HIGH_DENSITY)
+# define STM32_NR_INTERRUPTS 60
+# define STM32_HAVE_FSMC 1
+# endif
+
+#elif STM32_F1_LINE == STM32_F1_LINE_VALUE
+ /* Value line MCUs don't have USB peripherals. */
+# define STM32_HAVE_USB 0
+
+# ifdef STM32_MEDIUM_DENSITY
+# define STM32_NR_INTERRUPTS 56
+# define STM32_HAVE_FSMC 0
+# elif defined(STM32_HIGH_DENSITY)
+ /* 61 interrupts here counts the possibility for a remapped
+ * DMA2 channel 5 IRQ occurring at NVIC index 60. */
+# define STM32_NR_INTERRUPTS 61
+# define STM32_HAVE_FSMC 1
+# endif
-#ifndef STM32_PCLK2
-#define STM32_PCLK2 72000000U
-#endif
-
-#ifndef STM32_DELAY_US_MULT
-#define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */
#endif
/*
- * Density-specific values.
+ * Clock configuration.
+ *
+ * We've currently got values for F103 MCUs operating at the fastest
+ * possible speeds.
+ *
+ * You can patch these for your line, MCU, clock configuration,
+ * etc. here or by setting cflags when compiling libmaple.
*/
-#ifdef STM32_MEDIUM_DENSITY
-# ifndef STM32_NR_INTERRUPTS
-# define STM32_NR_INTERRUPTS 43
-# endif
-
-# ifndef STM32_HAVE_FSMC
-# define STM32_HAVE_FSMC 0
-# endif
-
-#elif defined(STM32_HIGH_DENSITY)
-# ifndef STM32_NR_INTERRUPTS
-# define STM32_NR_INTERRUPTS 60
-# endif
-
-# ifndef STM32_HAVE_FSMC
-# define STM32_HAVE_FSMC 1
-# endif
+#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE
+# ifndef STM32_PCLK1
+# define STM32_PCLK1 36000000U
+# endif
+# ifndef STM32_PCLK2
+# define STM32_PCLK2 72000000U
+# endif
+# ifndef STM32_DELAY_US_MULT
+# define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */
+# endif
+#elif STM32_F1_LINE == STM32_F1_LINE_VALUE /* TODO */
+#elif STM32_F1_LINE == STM32_F1_LINE_ACCESS /* TODO */
+#elif STM32_F1_LINE == STM32_F1_LINE_CONNECTIVITY /* TODO */
+#endif
-#else
-#error "Unsupported STM32F1 density, or no density specified. Add something " \
- "like -DSTM32_MEDIUM_DENSITY to your compiler arguments."
+/* Make sure we have the F1-specific defines we need. */
+#if !defined(STM32_F1_LINE)
+#error "Bad STM32F1 configuration. Check STM32F1 <series/stm32.h> header."
#endif
#ifdef __cplusplus
diff --git a/libmaple/stm32f2/include/series/stm32.h b/libmaple/stm32f2/include/series/stm32.h
index 222608d..5ab4c56 100644
--- a/libmaple/stm32f2/include/series/stm32.h
+++ b/libmaple/stm32f2/include/series/stm32.h
@@ -59,6 +59,7 @@ extern "C" {
#define STM32_MCU_SERIES STM32_SERIES_F2
#define STM32_NR_INTERRUPTS 81
#define STM32_HAVE_FSMC 1
+#define STM32_HAVE_USB 1
#if defined(MCU_STM32F207IC) || defined(MCU_STM32F207IG)
# define STM32_NR_GPIO_PORTS 9
diff --git a/support/make/board-includes/maple.mk b/support/make/board-includes/maple.mk
index a84f0ac..d31ad83 100644
--- a/support/make/board-includes/maple.mk
+++ b/support/make/board-includes/maple.mk
@@ -2,6 +2,4 @@ MCU := STM32F103RB
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOA
ERROR_LED_PIN := 5
-DENSITY := STM32_MEDIUM_DENSITY
-TARGET_FLAGS += -D$(DENSITY)
MCU_SERIES := stm32f1
diff --git a/support/make/board-includes/maple_RET6.mk b/support/make/board-includes/maple_RET6.mk
index 8bd9b90..d06f068 100644
--- a/support/make/board-includes/maple_RET6.mk
+++ b/support/make/board-includes/maple_RET6.mk
@@ -2,6 +2,4 @@ MCU := STM32F103RE
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOA
ERROR_LED_PIN := 5
-DENSITY := STM32_HIGH_DENSITY
-TARGET_FLAGS += -D$(DENSITY)
MCU_SERIES := stm32f1
diff --git a/support/make/board-includes/maple_mini.mk b/support/make/board-includes/maple_mini.mk
index 4a3e2ab..835adc3 100644
--- a/support/make/board-includes/maple_mini.mk
+++ b/support/make/board-includes/maple_mini.mk
@@ -2,6 +2,4 @@ MCU := STM32F103CB
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOB
ERROR_LED_PIN := 1
-DENSITY := STM32_MEDIUM_DENSITY
-TARGET_FLAGS += -D$(DENSITY)
MCU_SERIES := stm32f1
diff --git a/support/make/board-includes/maple_native.mk b/support/make/board-includes/maple_native.mk
index cd07c21..3e88e7b 100644
--- a/support/make/board-includes/maple_native.mk
+++ b/support/make/board-includes/maple_native.mk
@@ -2,6 +2,4 @@ MCU := STM32F103ZE
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOC
ERROR_LED_PIN := 15
-DENSITY := STM32_HIGH_DENSITY
-TARGET_FLAGS += -D$(DENSITY)
MCU_SERIES := stm32f1
diff --git a/support/make/board-includes/olimex_stm32_h103.mk b/support/make/board-includes/olimex_stm32_h103.mk
index 1d84cc2..96d6976 100644
--- a/support/make/board-includes/olimex_stm32_h103.mk
+++ b/support/make/board-includes/olimex_stm32_h103.mk
@@ -2,6 +2,4 @@ MCU := STM32F103RB
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOC
ERROR_LED_PIN := 12
-DENSITY := STM32_MEDIUM_DENSITY
-TARGET_FLAGS += -D$(DENSITY)
MCU_SERIES := stm32f1
diff --git a/wirish/stm32f1/boards_setup.cpp b/wirish/stm32f1/boards_setup.cpp
index 74c0e79..a71661d 100644
--- a/wirish/stm32f1/boards_setup.cpp
+++ b/wirish/stm32f1/boards_setup.cpp
@@ -87,7 +87,9 @@ namespace wirish {
void board_setup_usb(void) {
#if 0
+# if STM32_HAVE_USB
usb_cdcacm_enable(BOARD_USB_DISC_DEV, BOARD_USB_DISC_BIT);
+# endif
#endif
}