diff options
| -rw-r--r-- | Makefile | 49 | ||||
| -rw-r--r-- | libmaple/nvic.c | 83 | ||||
| -rw-r--r-- | libmaple/nvic.h | 239 | ||||
| -rw-r--r-- | libmaple/rules.mk | 2 | ||||
| -rw-r--r-- | libmaple/scb.h | 48 | ||||
| -rw-r--r-- | libmaple/util.c | 4 | ||||
| -rw-r--r-- | wirish/boards.cpp | 15 |
7 files changed, 232 insertions, 208 deletions
@@ -39,6 +39,20 @@ ifeq ($(BOARD), maple_RET6) DENSITY := STM32_HIGH_DENSITY endif +# Some target specific things +ifeq ($(MEMORY_TARGET), ram) + LDSCRIPT := $(BOARD)/ram.ld + VECT_BASE_ADDR := VECT_TAB_RAM +endif +ifeq ($(MEMORY_TARGET), flash) + LDSCRIPT := $(BOARD)/flash.ld + VECT_BASE_ADDR := VECT_TAB_FLASH +endif +ifeq ($(MEMORY_TARGET), jtag) + LDSCRIPT := $(BOARD)/jtag.ld + VECT_BASE_ADDR := VECT_TAB_BASE +endif + # Useful paths ifeq ($(LIB_MAPLE_HOME),) SRCROOT := . @@ -51,24 +65,17 @@ SUPPORT_PATH := $(SRCROOT)/support # Compilation flags. # FIXME remove the ERROR_LED config -GLOBAL_CFLAGS := -Os -g3 -gdwarf-2 -mcpu=cortex-m3 -mthumb -march=armv7-m \ - -nostdlib \ - -ffunction-sections -fdata-sections -Wl,--gc-sections \ - -DBOARD_$(BOARD) -DMCU_$(MCU) \ - -DERROR_LED_PORT=$(ERROR_LED_PORT) \ - -DERROR_LED_PIN=$(ERROR_LED_PIN) \ - -D$(DENSITY) -GLOBAL_CXXFLAGS := -fno-rtti -fno-exceptions -Wall \ +GLOBAL_FLAGS := -D$(VECT_BASE_ADDR) \ -DBOARD_$(BOARD) -DMCU_$(MCU) \ -DERROR_LED_PORT=$(ERROR_LED_PORT) \ -DERROR_LED_PIN=$(ERROR_LED_PIN) \ - -D$(DENSITY) + -D$(DENSITY) +GLOBAL_CFLAGS := -Os -g3 -gdwarf-2 -mcpu=cortex-m3 -mthumb -march=armv7-m \ + -nostdlib -ffunction-sections -fdata-sections \ + -Wl,--gc-sections $(GLOBAL_FLAGS) +GLOBAL_CXXFLAGS := -fno-rtti -fno-exceptions -Wall $(GLOBAL_FLAGS) GLOBAL_ASFLAGS := -mcpu=cortex-m3 -march=armv7-m -mthumb \ - -x assembler-with-cpp \ - -DBOARD_$(BOARD) -DMCU_$(MCU) \ - -DERROR_LED_PORT=$(ERROR_LED_PORT) \ - -DERROR_LED_PIN=$(ERROR_LED_PIN) \ - -D$(DENSITY) + -x assembler-with-cpp $(GLOBAL_FLAGS) LDDIR := $(SUPPORT_PATH)/ld LDFLAGS = -T$(LDDIR)/$(LDSCRIPT) -L$(LDDIR) \ @@ -79,20 +86,6 @@ LDFLAGS = -T$(LDDIR)/$(LDSCRIPT) -L$(LDDIR) \ include $(SUPPORT_PATH)/make/build-rules.mk include $(SUPPORT_PATH)/make/build-templates.mk -# Some target specific things -ifeq ($(MEMORY_TARGET), ram) - LDSCRIPT := $(BOARD)/ram.ld - VECT_BASE_ADDR := VECT_TAB_RAM -endif -ifeq ($(MEMORY_TARGET), flash) - LDSCRIPT := $(BOARD)/flash.ld - VECT_BASE_ADDR := VECT_TAB_FLASH -endif -ifeq ($(MEMORY_TARGET), jtag) - LDSCRIPT := $(BOARD)/jtag.ld - VECT_BASE_ADDR := VECT_TAB_BASE -endif - # Set all submodules here LIBMAPLE_MODULES := $(SRCROOT)/libmaple LIBMAPLE_MODULES += $(SRCROOT)/wirish diff --git a/libmaple/nvic.c b/libmaple/nvic.c index 28ca169..28db96a 100644 --- a/libmaple/nvic.c +++ b/libmaple/nvic.c @@ -26,89 +26,54 @@ * @brief Nested interrupt controller routines */ -#include "libmaple.h" -#include "scb.h" #include "nvic.h" -#include "systick.h" - -void nvic_set_vector_table(uint32 addr, uint32 offset) { - __write(SCB_VTOR, (uint32)addr | (offset & 0x1FFFFF80)); -} - -/** - * @brief turn on interrupt number n - * @param n interrupt number - */ -void nvic_irq_enable(uint32 n) { - uint32 *iser = &((uint32*)NVIC_ISER0)[(n/32)]; - __write(iser, BIT(n % 32)); -} - -/** - * @brief turn off interrupt number n - * @param n interrupt number - */ -void nvic_irq_disable(uint32 n) { - uint32 *icer = &((uint32*)NVIC_ICER0)[(n/32)]; - __write(icer, BIT(n % 32)); -} - -void nvic_irq_disable_all(void) { - /* Each ICER register contains 1 bit per interrupt. Writing a 1 - to that bit disables the corresponding interrupt. So each of - the following lines disables up to 32 interrupts at a time. - Since low, medium, and high-density devices all have less than - 64 interrupts, this suffices. */ - /* TODO: fix for connectivity line: __write(NVIC_ICER2,1), - requires connectivity line support in libmaple.h */ - __write(NVIC_ICER0, 0xFFFFFFFF); - __write(NVIC_ICER1, 0xFFFFFFFF); -} - +#include "scb.h" +#include "stm32.h" /** * @brief Set interrupt priority for an interrupt line - * Note: The STM32 only implements 4 bits of priority, ignoring - * the lower 4 bits. This means there are only 16 levels of priority. - * Bits[3:0] read as zero and ignore writes. + * + * Note: The STM32 only implements 4 bits of priority, ignoring the + * lower 4 bits. This means there are only 16 levels of priority. + * Bits[3:0] read as zero and ignore writes. + * * @param irqn device to set - * @param priority priority to set, 0 being highest priority and 15 being - * lowest. + * @param priority Priority to set, 0 being highest priority and 15 + * being lowest. */ -void nvic_irq_set_priority(int32 irqn, uint8 priority) { +void nvic_irq_set_priority(nvic_irq_num irqn, uint8 priority) { if (irqn < 0) { /* This interrupt is in the system handler block */ - SCB->SHP[((uint32)irqn & 0xF) - 4] = (priority & 0xF) << 4; + SCB_BASE->SHP[((uint32)irqn & 0xF) - 4] = (priority & 0xF) << 4; } else { - NVIC->IP[irqn] = (priority & 0xF) << 4; + NVIC_BASE->IP[irqn] = (priority & 0xF) << 4; } } /** - * @brief Initialize the NVIC according to VECT_TAB_FLASH, - * VECT_TAB_RAM, or VECT_TAB_BASE. + * @brief Initialize the NVIC + * @param vect_table_address Vector table base address. */ -void nvic_init(void) { +void nvic_init(uint32 vector_table_address, uint32 offset) { uint32 i; -#ifdef VECT_TAB_FLASH - nvic_set_vector_table(USER_ADDR_ROM, 0x0); -#elif defined VECT_TAB_RAM - nvic_set_vector_table(USER_ADDR_RAM, 0x0); -#elif defined VECT_TAB_BASE - nvic_set_vector_table(((uint32)0x08000000), 0x0); -#else -#error "You must set a base address for the vector table!" -#endif + nvic_set_vector_table(vector_table_address, offset); /* * Lower priority level for all peripheral interrupts to lowest * possible. */ for (i = 0; i < NR_INTERRUPTS; i++) { - nvic_irq_set_priority(i, 0xF); + nvic_irq_set_priority((nvic_irq_num)i, 0xF); } /* Lower systick interrupt priority to lowest level */ nvic_irq_set_priority(NVIC_SYSTICK, 0xF); } + +/** + * Reset the vector table address. + */ +void nvic_set_vector_table(uint32 addr, uint32 offset) { + SCB_BASE->VTOR = addr | (offset & 0x1FFFFF80); +} diff --git a/libmaple/nvic.h b/libmaple/nvic.h index cbcd49c..a889f4b 100644 --- a/libmaple/nvic.h +++ b/libmaple/nvic.h @@ -24,115 +24,170 @@ /** * @file nvic.h - * @brief Nested interrupt controller defines and prototypes + * @brief Nested vector interrupt controller support. */ #ifndef _NVIC_H_ #define _NVIC_H_ +#include "libmaple_types.h" + #ifdef __cplusplus extern "C"{ #endif -#define NVIC_INT_USBHP 19 -#define NVIC_INT_USBLP 20 - -/* NVIC Interrupt Enable registers */ -#define NVIC_ISER0 0xE000E100 -#define NVIC_ISER1 0xE000E104 -/* NVIC_ISER2 only on connectivity line */ +/** NVIC register map type. */ +typedef struct nvic_reg_map { + __io uint32 ISER[8]; /**< Interrupt Set Enable Registers */ + uint32 RESERVED0[24]; /**< Reserved */ + __io uint32 ICER[8]; /**< Interrupt Clear Enable Registers */ + uint32 RSERVED1[24]; /**< Reserved */ + __io uint32 ISPR[8]; /**< Interrupt Set Pending Registers */ + uint32 RESERVED2[24]; /**< Reserved */ + __io uint32 ICPR[8]; /**< Interrupt Clear Pending Registers */ + uint32 RESERVED3[24]; /**< Reserved */ + __io uint32 IABR[8]; /**< Interrupt Active bit Registers */ + uint32 RESERVED4[56]; /**< Reserved */ + __io uint8 IP[240]; /**< Interrupt Priority Registers */ + uint32 RESERVED5[644]; /**< Reserved */ + __io uint32 STIR; /**< Software Trigger Interrupt Registers */ +} nvic_reg_map; -/* NVIC Interrupt Clear registers */ -#define NVIC_ICER0 0xE000E180 -#define NVIC_ICER1 0xE000E184 -/* NVIC_ICER2 only on connectivity line */ +/** NVIC register map base pointer. */ +#define NVIC_BASE ((nvic_reg_map*)0xE000E100) -/* NVIC Priority */ -#define NVIC_PRI_BASE 0xE000E400 +/** + * Interrupt vector table interrupt numbers. Each enumerator is the + * position of the corresponding interrupt in the vector table. */ +typedef enum nvic_irq_num { + NVIC_NMI = -14, /**< Non-maskable interrupt */ + NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ + NVIC_MEM_MANAGE = -12, /**< Memory management */ + NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory + access fault. */ + NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or + illegal state. */ + NVIC_SVC = -5, /**< System service call via SWI insruction */ + NVIC_DEBUG_MON = -4, /**< Debug monitor */ + NVIC_PEND_SVC = -2, /**< Pendable request for system service */ + NVIC_SYSTICK = -1, /**< System tick timer */ + NVIC_WWDG = 0, /**< Window watchdog interrupt */ + NVIC_PVD = 1, /**< PVD through EXTI line detection */ + NVIC_TAMPER = 2, /**< Tamper */ + NVIC_RTC = 3, /**< Real-time clock */ + NVIC_FLASH = 4, /**< Flash */ + NVIC_RCC = 5, /**< Reset and clock control */ + NVIC_EXTI0 = 6, /**< EXTI line 0 */ + NVIC_EXTI1 = 7, /**< EXTI line 1 */ + NVIC_EXTI2 = 8, /**< EXTI line 2 */ + NVIC_EXTI3 = 9, /**< EXTI line 3 */ + NVIC_EXTI4 = 10, /**< EXTI line 4 */ + NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ + NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ + NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ + NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ + NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ + NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ + NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ + NVIC_ADC1_2 = 18, /**< ADC1 and ADC2 */ + NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ + NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ + NVIC_CAN_RX1 = 21, /**< CAN RX1 */ + NVIC_CAN_SCE = 22, /**< CAN SCE */ + NVIC_EXTI9_5 = 23, /**< EXTI line [9:5] */ + NVIC_TIMER1_BRK = 24, /**< Timer 1 break */ + NVIC_TIMER1_UP = 25, /**< Timer 1 update */ + NVIC_TIMER1_TRG_COM = 26, /**< Timer 1 trigger and commutation */ + NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ + NVIC_TIMER2 = 28, /**< Timer 2 */ + NVIC_TIMER3 = 29, /**< Timer 3 */ + NVIC_TIMER4 = 30, /**< Timer 4 */ + NVIC_I2C1_EV = 31, /**< I2C1 event */ + NVIC_I2C1_ER = 32, /**< I2C1 error */ + NVIC_I2C2_EV = 33, /**< I2C2 event */ + NVIC_I2C2_ER = 34, /**< I2C2 error */ + NVIC_SPI1 = 35, /**< SPI1 */ + NVIC_SPI2 = 36, /**< SPI2 */ + NVIC_USART1 = 37, /**< USART1 */ + NVIC_USART2 = 38, /**< USART2 */ + NVIC_USART3 = 39, /**< USART3 */ + NVIC_EXTI15_10 = 40, /**< EXTI line [15:10] */ + NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ + NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through + EXTI line */ + NVIC_TIMER8_BRK = 43, /**< Timer 8 break */ + NVIC_TIMER8_UP = 44, /**< Timer 8 update */ + NVIC_TIMER8_TRG_COM = 45, /**< Timer 8 trigger and commutation */ + NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ +#ifdef STM32_HIGH_DENSITY + NVIC_ADC3 = 47, /**< ADC3 */ + NVIC_FSMC = 48, /**< FSMC */ + NVIC_SDIO = 49, /**< SDIO */ + NVIC_TIMER5 = 50, /**< Timer 5 */ + NVIC_SPI3 = 51, /**< SPI3 */ + NVIC_UART4 = 52, /**< UART4 */ + NVIC_UART5 = 53, /**< UART5 */ + NVIC_TIMER6 = 54, /**< Timer 6 */ + NVIC_TIMER7 = 55, /**< Timer 7 */ + NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ + NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ + NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ + NVIC_DMA2_CH4_5 = 59, /**< DMA2 channels 4 and 5 */ +#endif +} nvic_irq_num; -/* System control registers */ -#define SCB_VTOR 0xE000ED08 // Vector table offset register +void nvic_init(uint32 vector_table_address, uint32 offset); +void nvic_set_vector_table(uint32 address, uint32 offset); +void nvic_set_priority(nvic_irq_num irqn, uint8 priority); -#define NVIC_BASE 0xE000E100 -#define NVIC ((nvic_reg_map*)NVIC_BASE) +/** + * Enables interrupts and configurable fault handlers (clear PRIMASK). + */ +static inline void nvic_globalirq_enable() { + asm volatile("cpsie i"); +} -typedef struct nvic_reg_map { - __io uint32 ISER[8]; // Interrupt Set Enable Registers - uint32 RESERVED0[24]; - __io uint32 ICER[8]; // Interrupt Clear Enable Registers - uint32 RSERVED1[24]; - __io uint32 ISPR[8]; // Interrupt Set Pending Registers - uint32 RESERVED2[24]; - __io uint32 ICPR[8]; // Interrupt Clear Pending Registers - uint32 RESERVED3[24]; - __io uint32 IABR[8]; // Interrupt Active bit Registers - uint32 RESERVED4[56]; - __io uint8 IP[240]; // Interrupt Priority Registers - uint32 RESERVED5[644]; - __io uint32 STIR; // Software Trigger Interrupt Registers -} nvic_reg_map; +/** + * Disable interrupts and configurable fault handlers (set PRIMASK). + */ +static inline void nvic_globalirq_disable() { + asm volatile("cpsid i"); +} -typedef enum nvic_irq_num { - NVIC_NMI = -14, - NVIC_MEM_MANAGE = -12, - NVIC_BUS_FAULT = -11, - NVIC_USAGE_FAULT = -10, - NVIC_SVC = -5, - NVIC_DEBUG_MON = -4, - NVIC_PEND_SVC = -2, - NVIC_SYSTICK = -1, - - NVIC_TIMER1_BRK = 24, - NVIC_TIMER1_UP = 25, - NVIC_TIMER1_TRG_COM = 26, - NVIC_TIMER1_CC = 27, - NVIC_TIMER2 = 28, - NVIC_TIMER3 = 29, - NVIC_TIMER4 = 30, - NVIC_TIMER5 = 50, - NVIC_TIMER6 = 54, - NVIC_TIMER7 = 55, - NVIC_TIMER8_BRK = 43, - NVIC_TIMER8_UP = 44, - NVIC_TIMER8_TRG_COM = 45, - NVIC_TIMER8_CC = 46, - - NVIC_USART1 = 37, - NVIC_USART2 = 38, - NVIC_USART3 = 39, - NVIC_UART4 = 52, - NVIC_UART5 = 53, - - NVIC_EXTI0 = 6, - NVIC_EXTI1 = 7, - NVIC_EXTI2 = 8, - NVIC_EXTI3 = 9, - NVIC_EXTI4 = 10, - NVIC_EXTI9_5 = 23, - NVIC_EXTI15_10 = 40, - - NVIC_DMA_CH1 = 11, - NVIC_DMA_CH2 = 12, - NVIC_DMA_CH3 = 13, - NVIC_DMA_CH4 = 14, - NVIC_DMA_CH5 = 15, - NVIC_DMA_CH6 = 16, - NVIC_DMA_CH7 = 17, - - NVIC_I2C1_EV = 31, - NVIC_I2C1_ER = 32, - NVIC_I2C2_EV = 33, - NVIC_I2C2_ER = 34 -} nvic_irq_num; +/** + * @brief Enable interrupt irq_num + * @param irq_num Interrupt to enable + */ +static inline void nvic_irq_enable(nvic_irq_num irq_num) { + NVIC_BASE->ISER[irq_num / 32] = BIT(irq_num % 32); +} -#define nvic_globalirq_enable() asm volatile("cpsie i") -#define nvic_globalirq_disable() asm volatile("cpsid i") +/** + * @brief Disable interrupt irq_num + * @param irq_num Interrupt to disable + */ +static inline void nvic_irq_disable(nvic_irq_num irq_num) { + NVIC_BASE->ICER[irq_num / 32] = BIT(irq_num % 32); +} -void nvic_init(void); -void nvic_irq_enable(uint32 device); -void nvic_irq_disable(uint32 device); -void nvic_irq_disable_all(void); -void nvic_set_priority(int32 irqn, uint8 priority); +/** + * @brief Quickly disable all interrupts. + * + * Calling this function is significantly faster than calling + * nvic_irq_disable() in a loop. + */ +static inline void nvic_irq_disable_all(void) { + /* Note: This only works up to XL density. The fix for + * connectivity line is: + * + * NVIC_BASE->ICER[2] = 0xF; + * + * We don't support connectivity line devices (yet), so leave it + * alone for now. + */ + NVIC_BASE->ICER[0] = 0xFFFFFFFF; + NVIC_BASE->ICER[1] = 0xFFFFFFFF; +} #ifdef __cplusplus } diff --git a/libmaple/rules.mk b/libmaple/rules.mk index a9d7e50..2eaea55 100644 --- a/libmaple/rules.mk +++ b/libmaple/rules.mk @@ -9,7 +9,7 @@ BUILDDIRS += $(BUILD_PATH)/$(d)/usb/usb_lib LIBMAPLE_INCLUDES := -I$(LIBMAPLE_PATH) -I$(LIBMAPLE_PATH)/usb -I$(LIBMAPLE_PATH)/usb/usb_lib # Local flags -CFLAGS_$(d) = -I$(d) $(LIBMAPLE_INCLUDES) -D$(VECT_BASE_ADDR) +CFLAGS_$(d) = -I$(d) $(LIBMAPLE_INCLUDES) # Local rules and targets cSRCS_$(d) := adc.c \ diff --git a/libmaple/scb.h b/libmaple/scb.h index 8bfdda3..1911435 100644 --- a/libmaple/scb.h +++ b/libmaple/scb.h @@ -29,34 +29,32 @@ #ifndef _SCB_H_ #define _SCB_H_ -/* FIXME this definition is missing doxygen comments */ - +/** System control block register map */ typedef struct scb_reg_map { - __io uint32 CPUID; // CPU ID Base Register - __io uint32 ICSR; // Interrupt Control State Register - __io uint32 VTOR; // Vector Table Offset Register - __io uint32 AIRCR; // Application Interrupt / Reset Control Register - __io uint32 SCR; // System Control Register - __io uint32 CCR; // Configuration Control Register - __io uint8 SHP[12]; // System Handlers Priority Registers (4-7, 8-11, 12-15) - __io uint32 SHCSR; // System Handler Control and State Register - __io uint32 CFSR; // Configurable Fault Status Register - __io uint32 HFSR; // Hard Fault Status Register - __io uint32 DFSR; // Debug Fault Status Register - __io uint32 MMFAR; // Mem Manage Address Register - __io uint32 BFAR; // Bus Fault Address Register - __io uint32 AFSR; // Auxiliary Fault Status Register - __io uint32 PFR[2]; // Processor Feature Register - __io uint32 DFR; // Debug Feature Register - __io uint32 ADR; // Auxiliary Feature Register - __io uint32 MMFR[4]; // Memory Model Feature Register - __io uint32 ISAR[5]; // ISA Feature Register + __io uint32 CPUID; /**< CPU ID Base Register */ + __io uint32 ICSR; /**< Interrupt Control State Register */ + __io uint32 VTOR; /**< Vector Table Offset Register */ + __io uint32 AIRCR; /**< Application Interrupt / Reset Control Register */ + __io uint32 SCR; /**< System Control Register */ + __io uint32 CCR; /**< Configuration Control Register */ + __io uint8 SHP[12]; /**< System Handlers Priority Registers + (4-7, 8-11, 12-15) */ + __io uint32 SHCSR; /**< System Handler Control and State Register */ + __io uint32 CFSR; /**< Configurable Fault Status Register */ + __io uint32 HFSR; /**< Hard Fault Status Register */ + __io uint32 DFSR; /**< Debug Fault Status Register */ + __io uint32 MMFAR; /**< Mem Manage Address Register */ + __io uint32 BFAR; /**< Bus Fault Address Register */ + __io uint32 AFSR; /**< Auxiliary Fault Status Register */ + __io uint32 PFR[2]; /**< Processor Feature Register */ + __io uint32 DFR; /**< Debug Feature Register */ + __io uint32 ADR; /**< Auxiliary Feature Register */ + __io uint32 MMFR[4]; /**< Memory Model Feature Register */ + __io uint32 ISAR[5]; /**< ISA Feature Register */ } scb_reg_map; -/* FIXME these names violate the libmaple naming conventions */ - -#define SCB_BASE 0xE000ED00 -#define SCB ((scb_reg_map*)(SCB_BASE)) +/** System control block register map base pointer */ +#define SCB_BASE ((struct scb_reg_map*)0xE000ED00) #endif diff --git a/libmaple/util.c b/libmaple/util.c index 6b4f216..77af5b8 100644 --- a/libmaple/util.c +++ b/libmaple/util.c @@ -69,8 +69,8 @@ void __error(void) { usart_disable_all(); /* Turn the USB interrupt back on so the bootloader keeps on functioning */ - nvic_irq_enable(NVIC_INT_USBHP); - nvic_irq_enable(NVIC_INT_USBLP); + nvic_irq_enable(NVIC_USB_HP_CAN_TX); + nvic_irq_enable(NVIC_USB_LP_CAN_RX0); /* Reenable global interrupts */ nvic_globalirq_enable(); diff --git a/wirish/boards.cpp b/wirish/boards.cpp index 1c2b1c7..9e25eeb 100644 --- a/wirish/boards.cpp +++ b/wirish/boards.cpp @@ -43,13 +43,14 @@ static void setupFlash(void); static void setupClocks(void); +static void setupNVIC(void); static void setupADC(void); static void setupTimers(void); void init(void) { setupFlash(); setupClocks(); - nvic_init(); + setupNVIC(); systick_init(SYSTICK_RELOAD_VAL); gpio_init_all(); afio_init(); @@ -90,6 +91,18 @@ static void setupClocks() { rcc_set_prescaler(RCC_PRESCALER_APB2, RCC_APB2_HCLK_DIV_1); } +static void setupNVIC() { +#ifdef VECT_TAB_FLASH + nvic_init(USER_ADDR_ROM, 0); +#elif defined VECT_TAB_RAM + nvic_init(USER_ADDR_RAM, 0); +#elif defined VECT_TAB_BASE + nvic_init((uint32)0x08000000, 0); +#else +#error "You must select a base address for the vector table." +#endif +} + static void adcDefaultConfig(const adc_dev* dev); static void setupADC() { |