aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Doxyfile1634
-rw-r--r--README41
-rw-r--r--source/adc.rst70
-rw-r--r--source/bootloader.rst3
-rw-r--r--source/compatibility.rst129
-rw-r--r--source/conf.py22
-rw-r--r--source/epilog.rst51
-rw-r--r--source/errata.rst11
-rw-r--r--source/gpio.rst89
-rw-r--r--source/i2c.rst2
-rw-r--r--source/language.rst53
-rw-r--r--source/libmaple-api.rst1
-rw-r--r--source/libmaple.rst2
-rw-r--r--source/libraries.rst4
-rw-r--r--source/maple-ide-install.rst3
-rw-r--r--source/maple-quickstart.rst9
-rw-r--r--source/prolog.rst7
-rw-r--r--source/troubleshooting.rst275
18 files changed, 2183 insertions, 223 deletions
diff --git a/Doxyfile b/Doxyfile
new file mode 100644
index 0000000..73f18f9
--- /dev/null
+++ b/Doxyfile
@@ -0,0 +1,1634 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = libmaple
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER = custom-build
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = ./docs/doxygen
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF = "The $name class" \
+ "The $name widget" \
+ "The $name file" \
+ is \
+ provides \
+ specifies \
+ contains \
+ represents \
+ a \
+ an \
+ the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES = "sideeffect=\par Side Effects:\n"
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT = YES
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = YES
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page. This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = libmaple/ \
+ wirish/
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS = *.c \
+ *.cpp \
+ *.h
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code. Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+# will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT = YES
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = YES
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME = FreeSans.ttf
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
diff --git a/README b/README
index 8556dd2..174f55a 100644
--- a/README
+++ b/README
@@ -1,22 +1,36 @@
-This directory contains the Sphinx documentation for libmaple. You
-can generate HTML documentation using the Makefile if you have make,
-or using make.bat from Windows.
+This directory contains the Sphinx documentation for libmaple, as well
+as a Doxygen configuration file; we turn Doxygen XML output into
+Sphinx documentation. You can generate HTML documentation using the
+Makefile if you have make, or using make.bat from Windows.
-For the impatient, you can build the HTML docs with (on Unix):
+You need a recent-ish version of doxygen in your PATH:
+
+ http://www.stack.nl/~dimitri/doxygen/download.html#latestsrc
+
+For the Doxygen-to-Sphinx bridge, we rely on a project called Breathe,
+by Michael Jones. You must clone the breathe repository and set an
+environment variable BREATHE_HOME to be able to build the
+documentation. Something like this on bash:
+
+ $ git clone http://github.com/michaeljones/breathe.git
+ $ export BREATHE_HOME /path/to/breathe/repo/
+
+You can now build the HTML docs with (on Unix):
$ sudo easy_install -U Sphinx
$ make html
-Which will produce HTML documentation in build/html.
+Which will produce Doxygen documentation in doxygen/xml, and HTML
+documentation (this is what you want to look at) in build/html.
All of the documentation itself lives in source/. The directory
source/_static is for static content like style sheets;
-source/_templates contains Sphinx templates.
+source/_templates contains Sphinx templates (or, it would if we had
+any).
-The documentation is written in reStructuredText (reST); it's a Python
-thing that they use to produce the docs at python.org (which are
-beautiful, if you've never seen them). You can read more about Sphinx
-here:
+The docs are written in reStructuredText (reST); it's a Python thing
+that they use to produce the docs at python.org (which are beautiful,
+if you've never seen them). You can read more about Sphinx here:
http://sphinx.pocoo.org/tutorial.html
@@ -24,5 +38,8 @@ Specific information on documenting C and C++ is available here:
http://sphinx.pocoo.org/domains.html
-The file source/conf.py is an autogenerated configuration file; you
-can read it yourself.
+You can view the reST source for any generated page of documentation
+by clicking the "Show Source" link in the sidebar.
+
+The file source/conf.py is the Sphinx configuration file; you can go
+read it for more information about our setup.
diff --git a/source/adc.rst b/source/adc.rst
index 17c672d..4e118aa 100644
--- a/source/adc.rst
+++ b/source/adc.rst
@@ -4,4 +4,72 @@
ADC
=====
-Stub.
+Analog-Digital Conversion is the process of reading a physical voltage
+as a number. The Maple has a large number of pins which are capable of
+taking 12-bit ADC measurements, which means that voltages from ground
+to +3.3v are read as numbers from 0 to 4095; this corresponds to a
+theoretical sensitivity of just under 1 millivolt. In reality, a
+number of factors introduce noise and bias into this reading and a
+number of techniques must be used to get good precision and accuracy.
+
+.. compound::
+
+ The header pins with ADC functionality (marked as "AIN" on the
+ silkscreen) are:
+
+ D0, D1, D2, D3, D10, D11, D12, D13, D15, D16, D17, D18, D19, D20, D27, D28
+
+.. contents:: Contents
+ :local:
+
+.. _adc-noise-bias:
+
+Noise and Bias
+--------------
+
+The biggest issues with analog-digital conversion are noise and bias.
+With the Maple, we have tried to isolate the ADC pins and traces from
+strong noise sources but there are always trade--offs between noise,
+additional functionality, cost, and package size.
+
+The 6 ADC pins in a bank (D15--D20) generally have the least
+noise and should be used for fine measurements. If the input voltage
+changes relatively slowly, a number of samples can be taken in
+succession and averaged together, or the same voltage can even be
+sampled by multiple ADC pins at the same time.
+
+An important factor when taking a voltage reading is the reference
+voltages that the sample is being compared against. In the case of the
+Maple, the high reference is |vcc| and the low reference is ground.
+This means that noise or fluctuations on either |vcc| or ground will
+affect the measurement. It also means that the voltage you are trying
+to sample must be between ground and 3.3V. In the case of a variable
+reading, it is best if the voltage varies over the entire range of
+0--3.3V; otherwise, only a fraction of the sensitivity is being
+leveraged. Resistor dividers and constant voltage diodes are basic
+tools which can help bring a given voltage signal into the appropriate
+range; opamps and other powered components can also be used.
+
+.. _adc-function-reference:
+
+Function Reference
+------------------
+
+.. TODO function reference (figure out Doxygen first)
+
+.. _adc-recommended-reading:
+
+Recommended Reading
+-------------------
+
+* `Wikipedia article on Analog-to-digital converter <http://en.wikipedia.org/wiki/Analog-to-digital_converter>`_
+* `Arduino Analog Input Tutorial <http://arduino.cc/en/Tutorial/AnalogInputPins>`_
+* STMicro documentation for STM32F103RB microcontroller:
+
+ * `All <http://www.st.com/mcu/devicedocs-STM32F103RB-110.html>`_
+ * `Datasheet (pdf) <http://www.st.com/stonline/products/literature/ds/13587.pdf>`_
+ * `Reference Manual (pdf) <http://www.st.com/stonline/products/literature/rm/13902.pdf>`_
+ * `Application Note on ADC Modes (pdf) <http://www.st.com/stonline/products/literature/an/16840.pdf>`_
+ * `Application Note on ADC Oversampling (pdf) <http://www.st.com/stonline/products/literature/an/14183.pdf>`_
+
+
diff --git a/source/bootloader.rst b/source/bootloader.rst
index 9280c68..c4c5da2 100644
--- a/source/bootloader.rst
+++ b/source/bootloader.rst
@@ -15,6 +15,9 @@ Flash memory and only runs when the chip is reset).
**Visit the github development project**: http://github.com/leaflabs/maple-bootloader
+.. contents:: Contents
+ :local:
+
Bootloader Schemes Explained!
-----------------------------
diff --git a/source/compatibility.rst b/source/compatibility.rst
index aeed36b..6166ec5 100644
--- a/source/compatibility.rst
+++ b/source/compatibility.rst
@@ -1,7 +1,136 @@
+.. highlight:: cpp
+
.. _compatibility:
=============================
Maple-Arduino Compatibility
=============================
+.. contents:: Contents
+ :local:
+
+Overview
+--------
+
+The biggest difference between the Maple and most Arduino boards is
+that the Maple uses a 32-bit ARM Cortex-M3 architecture chip while the
+Arduinos have 8-bit Atmel AVR chips. The different instruction set
+means that machine code (executable binary programs) is incompatible
+between the two, and a different compiler (actually just a different
+version of `gcc <http://gcc.gnu.org/>`_) is required. The compiler for
+the regular Arduino IDE is the popular :command:`avr-gcc` package; the
+compiler for the Maple version of the IDE is CodeSourcery's edition of
+gcc for the ARM EABI target (:command:`arm-non-eabi-gcc`).
+
+The bitwidth of the processor means that the Maple can process 32-bit
+operations (like adding two 32-bit integers) in a single instruction,
+while an Arduino processor would have to split up large operations
+into several smaller ones. In a lot of cases 8-bit operations are
+plenty (integers 0-255, single characters of text, etc.), but if
+you're dealing with higher resolution data, the speed up could be
+significant. A trade-off is that code could be larger as well; program
+instructions and memory locations can be up to 32-bits each, which in
+the worst case would quadruple program size. In reality, the removal
+of extra instructions and fancy packing together of simple
+instructions means that programs aren't much larger (or are even
+smaller).
+
+Header Numbering and Incompatibilities
+--------------------------------------
+
+The numbering of headers is different; on the Maple each GPIO has a
+unique number: D0, D1, D2, all the way up to D37 (actually, there are
+:ref:`a few more <jtag>`...). On the Arduino, the analog pins are
+numbered separately (A0-A5) from the digital pins (D0\ -D13).
+
+The incompatible hardware differences are:
+
+* |i2c| port: on most Arduinos, the |i2c| port is Analog Input
+ 4 (SDA) and Analog Input 5 (SCL); on the Maple, |i2c| port 1 is D5
+ (SCL) and D9 (SDA), and |i2c| port 2 is D29 (SCL) and D30 (SDA).
+
+ It should be possible to skywire, sacrificing signal quality (due to
+ increased capacitance). Alternatively, |i2c| can be bit-banged
+ reasonably well in software. This peripheral could potentially be
+ rerouted internally, but we haven't looked into it.
+
+* :ref:`PWM <pwm>` on D10: all the other standard Arduino PWM headers have PWM
+ functionality on the Maple (D2,D3,D6,D9,D11), but not D10. We did
+ our best! It may be possible to reroute this peripheral internally
+ using low level configuration, but we haven't looked in to it.
+
+* No External Voltage Reference: The Arduino has an Aref pin which
+ allows the use of an external ADC voltage reference; the Maple has
+ an extra GPIO pin (14) with PWM capability in this spot, and does
+ not allow an external voltage reference to be configured.
+
+* EEPROM: the Maple does not have any internal EEPROM. This
+ functionality can be emulated with regular persistent flash memory,
+ or with an external EEPROM chip.
+
+* ISP Programming: the Maple does not use an ISP/ICSP bus for
+ debugging; it uses :ref:`JTAG <jtag>`.
+
+
+Software Language/Library Changes
+---------------------------------
+
+With :ref:`one notable exception <language-no-word>`, the entire
+Arduino language is supported. However, there are some subtle
+differences, most of which are improvements:
+
+* 32-bit integers: many standard functions either expect or return
+ full 32-bit (4 byte) integer values instead of the regular 16-bit (2
+ byte) Arduino values.
+
+* `pinMode()`_ types: any :ref:`GPIO <gpio>` (including analog pins)
+ can be configured into one of the following modes with a single call
+ to `pinMode()`_: ``OUTPUT``, ``OUTPUT_OPEN_DRAIN``,
+ ``INPUT_FLOATING``, ``INPUT_PULLUP``,
+ ``INPUT_PULLDOWN``. Additionally, the PWM and Analog Input pins can
+ be configured as ``INPUT_ANALOG`` and ``PWM`` respectively. See the
+ :ref:`GPIO documentation <gpio>` for more information.
+
+ .. TODO: reference libmaple docs above when they're done
+
+* Serial1 syntax: like the `Arduino Mega
+ <http://arduino.cc/en/Main/ArduinoBoardMega>`_, the Maple has
+ multiple USART ports. By default, Serial is not mapped to any of
+ them, use ``Serial1`` through ``Serial3`` instead.
+
+ .. TODO: reference libmaple docs for Serial[n] above when they're done
+
+* 16-bit :ref:`PWM <pwm>`: Arduino boards support 8-bit PWM, which
+ means that calls to `analogWrite()`_ take values between 0 (always
+ off) and 255 (always on). The Maple supports 16-bit PWM, so the
+ corresponding values should be between 0 (always off) and 65535
+ (always on).
+
+* 12-bit :ref:`ADC <adc>`: Arduino boards support 10-bit ADC, which
+ means that calls to `analogRead()`_ will return values between 0 and
+ 1023. The Maple supports 12-bit ADC, so the same call will instead
+ return values between 0 and 4095.
+
+
+.. class:: ported-feature
+
+I am supported!
+
+This should be ordinary
+
+.. class:: non-ported-feature
+
+I can't do it :(
+
+Also ordinary
+
+.. class:: partly-ported-feature
+
+I sorta work
+
+And I am also ordinary
+
Stub.
+
+(not finished)
+
diff --git a/source/conf.py b/source/conf.py
index 5fcb939..26147fd 100644
--- a/source/conf.py
+++ b/source/conf.py
@@ -17,7 +17,11 @@ import sys, os
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
+#
+# We rely on Michael Jones's breathe as a Doxygen-to-Sphinx bridge.
+# See libmaple/docs/README for information on obtaining it and letting
+# Sphinx know where it is.
+sys.path.append(os.environ['BREATHE_HOME'])
# -- General configuration ----------------------------------------------------
@@ -29,7 +33,7 @@ import sys, os
# ones.
extensions = ['sphinx.ext.autodoc', 'sphinx.ext.doctest',
'sphinx.ext.intersphinx', 'sphinx.ext.todo',
- 'sphinx.ext.coverage']
+ 'sphinx.ext.coverage', 'breathe']
# Add any paths that contain templates here, relative to this directory.
templates_path = ['_templates']
@@ -68,12 +72,16 @@ release = '0.0.7'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
-exclude_patterns = ['epilog.rst']
+exclude_patterns = ['epilog.rst', 'prolog.rst']
# Included at the end of every source file that is read.
with open('epilog.rst', 'r') as ep:
rst_epilog = ep.read()
+# Included at the beginning of every source file that is read.
+with open('prolog.rst', 'r') as pr:
+ rst_prolog = pr.read()
+
# The reST default role (used for this markup: `text`) to use for all
# documents.
#default_role = None
@@ -229,3 +237,11 @@ man_pages = [
# Example configuration for intersphinx: refer to the Python standard library.
intersphinx_mapping = {'http://docs.python.org/': None}
+
+
+# -- Options for breathe integration ------------------------------------------
+
+breathe_projects = {'libmaple' : os.path.join(os.environ['LIB_MAPLE_HOME'],
+ 'docs', 'doxygen', 'xml')}
+
+breathe_default_project = 'libmaple'
diff --git a/source/epilog.rst b/source/epilog.rst
index 0e430c8..7805362 100644
--- a/source/epilog.rst
+++ b/source/epilog.rst
@@ -4,5 +4,56 @@
.. Common URL references
.. _forum: http://forums.leaflabs.com
.. _contact: http://leaflabs.com/contact/
+
+
+.. Arduino built-in functions
.. _setup(): http://arduino.cc/en/Reference/Setup
.. _loop(): http://arduino.cc/en/Reference/Loop
+
+.. _pinMode(): http://arduino.cc/en/Reference/PinMode
+.. _digitalWrite(): http://arduino.cc/en/Reference/DigitalWrite
+.. _digitalRead(): http://arduino.cc/en/Reference/DigitalRead
+
+.. _analogReference(): http://arduino.cc/en/Reference/AnalogReference
+.. _analogRead(): http://arduino.cc/en/Reference/AnalogRead
+.. _analogWrite(): http://arduino.cc/en/Reference/AnalogWrite
+
+.. _tone(): http://arduino.cc/en/Reference/Tone
+.. _noTone(): http://arduino.cc/en/Reference/NoTone
+.. _shiftOut(): http://arduino.cc/en/Reference/ShiftOut
+.. _pulseIn(): http://arduino.cc/en/Reference/PulseIn
+
+.. _millis(): http://arduino.cc/en/Reference/Millis
+.. _micros(): http://arduino.cc/en/Reference/Micros
+.. _delay(): http://arduino.cc/en/Reference/Delay
+.. _delayMicroseconds(): http://arduino.cc/en/Reference/DelayMicroseconds
+
+.. _min(): http://arduino.cc/en/Reference/Min
+.. _max(): http://arduino.cc/en/Reference/Max
+.. _abs(): http://arduino.cc/en/Reference/Abs
+.. _constrain(): http://arduino.cc/en/Reference/Constrain
+
+.. _map(): http://arduino.cc/en/Reference/Map
+.. _pow(): http://arduino.cc/en/Reference/Pow
+.. _sqrt(): http://arduino.cc/en/Reference/Sqrt
+
+.. _sin(): http://arduino.cc/en/Reference/Sin
+.. _cos(): http://arduino.cc/en/Reference/Cos
+.. _tan(): http://arduino.cc/en/Reference/Tan
+
+.. _randomSeed(): http://arduino.cc/en/Reference/RandomSeed
+.. _random(): http://arduino.cc/en/Reference/Random
+
+.. _lowByte(): http://arduino.cc/en/Reference/LowByte
+.. _highByte(): http://arduino.cc/en/Reference/HighByte
+.. _bitRead(): http://arduino.cc/en/Reference/BitRead
+.. _bitWrite(): http://arduino.cc/en/Reference/BitWrite
+.. _bitSet(): http://arduino.cc/en/Reference/BitSet
+.. _bitClear(): http://arduino.cc/en/Reference/BitClear
+.. _bit(): http://arduino.cc/en/Reference/Bit
+
+.. _attachInterrupt(): http://arduino.cc/en/Reference/AttachInterrupt
+.. _detachInterrupt(): http://arduino.cc/en/Reference/DetachInterrupt
+
+.. _interrupts(): http://arduino.cc/en/Reference/Interrupts
+.. _noInterrupts(): http://arduino.cc/en/Reference/NoInterrupts
diff --git a/source/errata.rst b/source/errata.rst
index b702bd1..09b2ad1 100644
--- a/source/errata.rst
+++ b/source/errata.rst
@@ -4,4 +4,15 @@
Errata
========
+This page is a collection of known issues and warnings for each
+revision of the Maple board. The failure modes aren't design errors,
+but are easy ways to break or damage your board permanently. For a
+list of differences between the Maple and Arduinos, see the page on
+:ref:`compatibility <compatibility>`.
+
+.. contents:: Contents
+ :local:
+
Stub.
+
+(not finished)
diff --git a/source/gpio.rst b/source/gpio.rst
index f608a61..2567221 100644
--- a/source/gpio.rst
+++ b/source/gpio.rst
@@ -4,4 +4,91 @@
GPIO
======
-Stub.
+The Maple features 38 ready-to-use general purpose input/output (GPIO)
+pins for digital input/output, numbered D0 through D37. These numbers
+correspond to the numeric values next to each header on the Maple
+silkscreen.
+
+Many of these pins may additionally be used for special features or
+peripheral functions. This page documents those capabilities, by pin.
+
+The current and voltage limitations have not been copied over from the
+STM32 datasheet (see the :ref:`Recommended Reading
+<gpio-recommended-reading>` for a link). In particular, a number of
+GPIO pins are 5v tolerant (which means that applying 5v to a pin and
+reading it as input or allowing it to drain to ground will not damage
+that pin), while some are not.
+
+.. contents:: Contents
+ :local:
+
+Pin Mapping Mega Table
+----------------------
+
+This huge reference table shows the available functionality on every
+GPIO pin, by peripheral type. The "STM32" column refers to the port
+and number that the header is connected to on the microcontroller.
+The "5v?" column documents whether or not the pin is 5v tolerant (see
+above).
+
+.. csv-table::
+ :header: "Pin", "STM32", ":ref:`ADC <adc>`", ":ref:`Timer <timers>`", ":ref:`I2C <i2c>`", ":ref:`UART <usart>`", ":ref:`SPI <spi>`", "5v?"
+
+ "D0", "PA3", "ADC3", "TIM2_CH4", "-", "USART2_RX", "-", "No"
+ "D1", "PA2", "ADC2", "TIM2_CH3", "-", "USART2_TX", "-", "No"
+ "D2", "PA0", "ADC0", "TIM2_CH1_ETR", "-", "USART2_CTS", "-", "No"
+ "D3", "PA1", "ADC1", "TIM2_CH2", "-", "USART2_RTS", "-", "No"
+ "D4", "PB5", "-", "-", "ISC1_SMBA", "-", "-", "No"
+ "D5", "PB6", "-", "TIM4_CH1", "I2C1_SCL", "-", "-", "Yes"
+ "D6", "PA8", "-", "TIM1_CH1", "-", "USART1_CK", "-", "Yes"
+ "D7", "PA9", "-", "TIM1_CH2", "-", "USART1_TX", "-", "Yes"
+ "D8", "PA10", "-", "TIM1_CH3", "-", "USART1_RX", "-", "Yes"
+ "D9", "PB7", "-", "TIM4_CH2", "I2C1_SDA", "-", "-", "Yes"
+ "D10", "PA4", "ADC4", "-", "-", "USART2_CK", "SPI1_NSS", "No"
+ "D11", "PA7", "ADC7", "TIM3_CH2", "-", "-", "SPI1_MOSI", "No"
+ "D12", "PA6", "ADC6", "TIM3_CH1", - - SPI1_MISO No
+ D13 PA5 ADC5 - - - SPI1_SCK No
+ D14 PB8 - TIM4_CH3 - - - Yes
+
+ Analog header
+
+ D15 PC0 ADC10 - - - - No
+ D16 PC1 ADC11 - - - - No
+ D17 PC2 ADC12 - - - - No
+ D18 PC3 ADC13 - - - - No
+ D19 PC4 ADC14 - - - - No
+ D20 PC5 ADC15 - - - - No
+
+ External header
+
+ D21 PC13 - - - - - No
+ D22 PC14 - - - - - No
+ D23 PC15 - - - - - No
+ D24 PB9 - TIM4_CH4 - - - Yes
+ D25 PD2 - TIM3_ETR - - - Yes
+ D26 PC10 - - - - - Yes
+ D27 PB0 ADC8 TIM3_CH3 - - - No
+ D28 PB1 ADC9 TIM3_CH4 - - - No
+ D29 PB10 - - I2C2_SCL USART3_TX - Yes
+ D30 PB11 - - I2C2_SDA USART3_RX - Yes
+ D31 PB12 - TIM1_BKIN I2C2_SMBAL USART3_CK SPI2_NSS Yes
+ D32 PB13 - TIM1_CH1N - USART3_CTS SPI2_SCK Yes
+ D33 PB14 - TIM1_CH2N - USART3_RTS SPI2_MISO Yes
+ D34 PB15 - TIM1_CH3N - - SPI2_MOSI Yes
+ D35 PC6 - - - - - Yes
+ D36 PC7 - - - - - Yes
+ D37 PC8 - - - - -
+
+
+Stub (unfinished).
+
+.. _gpio-recommended-reading:
+
+Recommended Reading
+-------------------
+
+STMicro documentation for STM32F103RB microcontroller:
+
+ * `All <http://www.st.com/mcu/devicedocs-STM32F103RB-110.html>`_
+ * `Datasheet (pdf) <http://www.st.com/stonline/products/literature/ds/13587.pdf>`_
+ * `Reference Manual (pdf) <http://www.st.com/stonline/products/literature/rm/13902.pdf>`_
diff --git a/source/i2c.rst b/source/i2c.rst
index e0444eb..34bd57c 100644
--- a/source/i2c.rst
+++ b/source/i2c.rst
@@ -4,6 +4,4 @@
|i2c|
=====
-.. |i2c| replace:: I\ :sup:`2`\ C
-
Stub.
diff --git a/source/language.rst b/source/language.rst
index 8115d6b..6eb5bc7 100644
--- a/source/language.rst
+++ b/source/language.rst
@@ -24,6 +24,9 @@ C or C++ programmers curious about the differences between the Wiring
language and C++ may wish to skip to the
:ref:`arduino_c_for_c_hackers`.
+.. contents:: Contents
+ :local:
+
Unique Maple Additions
----------------------
@@ -308,59 +311,15 @@ Arduino Documentation Links
.. _const: http://arduino.cc/en/Reference/Const
.. _sizeof(): http://arduino.cc/en/Reference/Sizeof
-.. _pinMode(): http://arduino.cc/en/Reference/PinMode
-.. _digitalWrite(): http://arduino.cc/en/Reference/DigitalWrite
-.. _digitalRead(): http://arduino.cc/en/Reference/DigitalRead
-
-.. _analogReference(): http://arduino.cc/en/Reference/AnalogReference
-.. _analogRead(): http://arduino.cc/en/Reference/AnalogRead
-.. _analogWrite(): http://arduino.cc/en/Reference/AnalogWrite
-
-.. _tone(): http://arduino.cc/en/Reference/Tone
-.. _noTone(): http://arduino.cc/en/Reference/NoTone
-.. _shiftOut(): http://arduino.cc/en/Reference/ShiftOut
-.. _pulseIn(): http://arduino.cc/en/Reference/PulseIn
-
-.. _millis(): http://arduino.cc/en/Reference/Millis
-.. _micros(): http://arduino.cc/en/Reference/Micros
-.. _delay(): http://arduino.cc/en/Reference/Delay
-.. _delayMicroseconds(): http://arduino.cc/en/Reference/DelayMicroseconds
-
-.. _min(): http://arduino.cc/en/Reference/Min
-.. _max(): http://arduino.cc/en/Reference/Max
-.. _abs(): http://arduino.cc/en/Reference/Abs
-.. _constrain(): http://arduino.cc/en/Reference/Constrain
-
-.. _map(): http://arduino.cc/en/Reference/Map
-.. _pow(): http://arduino.cc/en/Reference/Pow
-.. _sqrt(): http://arduino.cc/en/Reference/Sqrt
-
-.. _sin(): http://arduino.cc/en/Reference/Sin
-.. _cos(): http://arduino.cc/en/Reference/Cos
-.. _tan(): http://arduino.cc/en/Reference/Tan
-
-.. _randomSeed(): http://arduino.cc/en/Reference/RandomSeed
-.. _random(): http://arduino.cc/en/Reference/Random
-
-.. _lowByte(): http://arduino.cc/en/Reference/LowByte
-.. _highByte(): http://arduino.cc/en/Reference/HighByte
-.. _bitRead(): http://arduino.cc/en/Reference/BitRead
-.. _bitWrite(): http://arduino.cc/en/Reference/BitWrite
-.. _bitSet(): http://arduino.cc/en/Reference/BitSet
-.. _bitClear(): http://arduino.cc/en/Reference/BitClear
-.. _bit(): http://arduino.cc/en/Reference/Bit
-
+.. Links for the standard Arduino built-in functions are included as
+.. part of the standard epilog.
.. _our reference page: http://leaflabs.com/docs/external-interrupts/
-.. _attachInterrupt(): http://arduino.cc/en/Reference/AttachInterrupt
-.. _detachInterrupt(): http://arduino.cc/en/Reference/DetachInterrupt
-
-.. _interrupts(): http://arduino.cc/en/Reference/Interrupts
-.. _noInterrupts(): http://arduino.cc/en/Reference/NoInterrupts
.. _Serial: http://arduino.cc/en/Reference/Serial
.. _community-contributed code: http://www.arduino.cc/playground/Main/GeneralCodeLibrary
.. _newlib: http://sourceware.org/newlib/
+
.. _arduino_c_for_c_hackers:
Note for C/C++ Programmers
diff --git a/source/libmaple-api.rst b/source/libmaple-api.rst
index af283cb..d5b90b6 100644
--- a/source/libmaple-api.rst
+++ b/source/libmaple-api.rst
@@ -8,3 +8,4 @@ This page documents the lower-level features of libmaple, which may be
of use to programmers who don't wish to use the Arduino-style
environment provided by the `Maple IDE <maple-ide-install>`_.
+Stub.
diff --git a/source/libmaple.rst b/source/libmaple.rst
index 620fdfa..a018cd7 100644
--- a/source/libmaple.rst
+++ b/source/libmaple.rst
@@ -30,6 +30,8 @@ wrappers and code to imitate the Arduino programming library.
git clone git://github.com/leaflabs/libmaple.git
+**Table of contents:**
+
.. toctree::
:maxdepth: 2
diff --git a/source/libraries.rst b/source/libraries.rst
index c2d5cb0..6a97b0e 100644
--- a/source/libraries.rst
+++ b/source/libraries.rst
@@ -15,8 +15,8 @@ library you want.
Any incompatibilities between the Maple and Arduino versions are noted
in the description of the library.
-* :ref:`LiquidCrystal <liquid_crystal>`
-* :ref:`Wire <wire>`
+.. contents:: Contents
+ :local:
.. _liquid_crystal:
diff --git a/source/maple-ide-install.rst b/source/maple-ide-install.rst
index 46c903b..3c3fffe 100644
--- a/source/maple-ide-install.rst
+++ b/source/maple-ide-install.rst
@@ -11,7 +11,8 @@ check the :ref:`troubleshooting page <troubleshooting>` for help with
some common problems. If all else fails, try our `forum`_, or `contact
us directly <http://leaflabs.com/contact>`_!
-.. _forum: http://forums.leaflabs.com
+.. contents:: Contents
+ :local:
Download
--------
diff --git a/source/maple-quickstart.rst b/source/maple-quickstart.rst
index 20d84a0..4d646d7 100644
--- a/source/maple-quickstart.rst
+++ b/source/maple-quickstart.rst
@@ -15,13 +15,8 @@ If you have trouble along the way, try the :ref:`troubleshooting page
<troubleshooting>` for help with some common problems. If all else
fails, try our `forum`_, or `contact us directly <contact>`_!
-The steps are:
-
-* :ref:`Install and run the IDE <maple-quickstart-get-ide>`
-
-* :ref:`Compile and upload a program <maple-quickstart-compile-blinky>`
-
-* :ref:`Test the USB serial connection <maple-quickstart-serial-port>`
+.. contents:: Contents
+ :local:
.. _maple-quickstart-get-ide:
diff --git a/source/prolog.rst b/source/prolog.rst
new file mode 100644
index 0000000..2823947
--- /dev/null
+++ b/source/prolog.rst
@@ -0,0 +1,7 @@
+.. Additions to this file will be included at the beginning of every
+.. .rst file. DO NOT USE IT to insert a header; this is not
+.. recommended by the Sphinx people, who have other ways of doing it.
+
+.. Common substitutions
+.. |vcc| replace:: V\ :sub:`cc`
+.. |i2c| replace:: I\ :sup:`2`\ C
diff --git a/source/troubleshooting.rst b/source/troubleshooting.rst
index b878ae4..9d452d1 100644
--- a/source/troubleshooting.rst
+++ b/source/troubleshooting.rst
@@ -2,231 +2,212 @@
.. _troubleshooting:
-=======================
- Maple Troubleshooting
-=======================
-
-* :ref:`Hardware Problems <troubleshooting-hardware>`
-
- * The status LED is throbbing and I can't upload my program!
- * My board is bricked! I can't upload via the bootloader no matter what!
- * My 5v peripheral doesn't work! (I2C, SPI, USART, etc)
- * The reset and D38/serial buttons don't seem to work reliably!
-
-* :ref:`IDE installation problems <troubleshooting-ide-install>`
-
- * I don't have root/administrator access!
- * [Linux] I don't use udev!
-
-* :ref:`IDE usage problems <troubleshooting-ide-usage>`
-
- * [Mac OSX] The "Board" and "Serial Port" menu items are missing!
-
-* :ref:`Common compiler problems <troubleshooting-compilation>`
-
- * ``NullPointerException``
- * ``undefined reference to setup()/loop()``
- * ``error: 'Serial' was not declared in this scope``
- * ``File(s) not found``
-
-* :ref:`Common upload problems <troubleshooting-upload>`
-
- * My program is too large!
- * ``No DFU capable USB device found``
- * I have multiple Maples installed; how do I know which one will get flashed?
+Troubleshooting
+===============
-* :ref:`Command-line issues <troubleshooting-shell>`
+This page documents common problems and their solutions.
- * My flash programs don't seem to stick; they behave like they are RAM!
- * [Linux] ``cdc_acm 3-1:1.0: no more free acm devices``
+.. contents:: Contents
+ :local:
-* :ref:`Tips and tricks <troubleshooting-tips-tricks>`
-
- * Perpetual bootloader mode
-
-.. _troubleshooting-hardware:
-
-Hardware problems
------------------
+===================
+ Hardware problems
+===================
The status LED is throbbing and I can't upload my program!
+----------------------------------------------------------
- The LED throbs when there has been a failed software
- :ref:`assertion <language-assert>`.
+The LED throbs when there has been a failed software :ref:`assertion
+<language-assert>`.
- You can still reprogram by resetting the board and uploading
- during the short window when the bootloader waits for a
- program.
+You can still reprogram by resetting the board and uploading during
+the short window when the bootloader waits for a program.
- To make this window longer (it can be hard to get the timing
- right), use :ref:`perpetual bootloader mode
- <troubleshooting-perpetual-bootloader>`.
+To make this window longer (it can be hard to get the timing right),
+use :ref:`perpetual bootloader mode
+<troubleshooting-perpetual-bootloader>`.
My board is bricked! I can't upload via the bootloader no matter what!
+----------------------------------------------------------------------
- Use the hardcoded serial STM32 serial bootloader to re-flash the
- bootloader.
+Use the hardcoded serial STM32 serial bootloader to re-flash the
+bootloader.
- .. TODO insert docs on reflashing the bootloader
+.. TODO insert docs on reflashing the bootloader
- If it really is bricked, and you think it's our fault,
- `contact us <http://leaflabs.com/contact>`_\ !
+If it really is bricked, and you think it's our fault, `contact us
+<http://leaflabs.com/contact>`_\ !
My 5v peripheral doesn't work! (I2C, SPI, USART, etc)
+-----------------------------------------------------
- Yup, the Maple is a 3.3v board. You may need to use a level
- converter. See the :ref:`compatibility <compatibility>`,
- :ref:`GPIO <gpio>`, or other :ref:`hardware specific documentation
- <hardware>` for more information.
+Yup, the Maple is a 3.3v board. You may need to use a level
+converter. See the :ref:`compatibility <compatibility>`, :ref:`GPIO
+<gpio>`, or other :ref:`hardware specific documentation <hardware>`
+for more information.
The reset and D38/serial buttons don't seem to work reliably!
+-------------------------------------------------------------
- A few rev3 boards shipped in May-June 2010 may have had unreliable
- buttons; see the :ref:`errata page <errata>` for details. `We're
- happy to replace these for you <http://leaflabs.com/contact>`_\ !
+A few rev3 boards shipped in May-June 2010 may have had unreliable
+buttons; see the :ref:`errata page <errata>` for details. `We're
+happy to replace these for you <http://leaflabs.com/contact>`_\ !
-.. _troubleshooting-ide-install:
-Installation problems
----------------------
+.. _troubleshooting-ide-install:
+=======================
+ Installation problems
+=======================
I don't have root/administrator access!
+---------------------------------------
- There are probably hacks or work-arounds to getting programs
- uploaded without higher level system permissions. If you can
- access USB character devices (ACM or ttyUSB style), you should be
- able to communicate with the Maple and reprogram using an FTDI
- converter and the serial bootloader, but we haven't tried.
+There are probably hacks or work-arounds to getting programs uploaded
+without higher level system permissions. If you can access USB
+character devices (ACM or ttyUSB style), you should be able to
+communicate with the Maple and reprogram using an FTDI converter and
+the serial bootloader, but we haven't tried.
- .. TODO: be more helpful
+.. TODO: be more helpful
[Linux] I don't use udev!
+-------------------------
- There is probably a simple way to get autoconfiguration working
- with devfs; in the meantime, you could try running the entire IDE
- as root.
+There is probably a simple way to get autoconfiguration working with
+devfs; in the meantime, you could try running the entire IDE as root.
- .. TODO: be more helpful
+.. TODO: be more helpful
.. _troubleshooting-ide-usage:
-IDE problems
-------------
+==============
+ IDE problems
+==============
-[Mac OSX] The "Board" and "Serial Port" menu items are missing!
+[Mac OS X] The "Board" and "Serial Port" menu items are missing!
+----------------------------------------------------------------
- Sometimes this happens if you try to compile or upload without
- having a board selected. The work-around is to restart the
- IDE. Mysterious!
+Sometimes this happens if you try to compile or upload without having
+a board selected. The work-around is to restart the IDE. Mysterious!
.. _troubleshooting-compilation:
-Common compiler problems
-------------------------
+==========================
+ Common compiler problems
+==========================
``NullPointerException``
+------------------------
- A classic! Make sure you have selected a board from the pulldown menu.
+A classic! Make sure you have selected a board from the pulldown menu.
- .. TODO: remove when Python version is released
+.. TODO: remove when Python version is released
``undefined reference to setup()/loop()``
+-----------------------------------------
- Your sketch/program either does not include one of the `setup
- <setup()>`_ or `loop <loop()>`_ functions, or it was not found by
- the compiler. Your program must include both ``void setup()`` and
- ``void loop()`` functions; they don't have to do anything, but
- they **must** be there.
+Your sketch/program either does not include one of the `setup
+<setup()>`_ or `loop <loop()>`_ functions, or it was not found by the
+compiler. Your program must include both ``void setup()`` and ``void
+loop()`` functions; they don't have to do anything, but they **must**
+be there.
- You can start with an example program (to see one in the IDE,
- click on File > Examples > Stubs > BareMinimum) to get the basic
- structure. See also the :ref:`language <language>` documentation.
+You can start with an example program (to see one in the IDE, click on
+File > Examples > Stubs > BareMinimum) to get the basic structure.
+See also the :ref:`language <language>` documentation.
- This is a common error when your entire sketch is blank.
+This is a common error when your entire sketch is blank.
``error: 'Serial' was not declared in this scope``
+--------------------------------------------------
- The classic Arduino has only one USART device and uses the unique
- name "Serial" to control it. Larger devices like the Arduino Mega
- and the Maple have multiple USARTS referred to as ``Serial1``,
- ``Serial2``, etc. You probably want ``Serial2`` on the Maple;
- that's the one connected to pins D0 and D1. See also the
- :ref:`USART docs <usart>`.
+The classic Arduino has only one USART device and uses the unique name
+"Serial" to control it. Larger devices like the Arduino Mega and the
+Maple have multiple USARTS referred to as ``Serial1``, ``Serial2``,
+etc. You probably want ``Serial2`` on the Maple; that's the one
+connected to pins D0 and D1. See also the :ref:`USART docs <usart>`.
``File(s) not found``
+---------------------
- There is an intermittent bug with the temporary directory build
- system that on occasion will lose many of the ``#include``\ d
- libmaple files. If you recompile everything, it should be fine.
+There is an intermittent bug with the temporary directory build system
+that on occasion will lose many of the ``#include``\ d libmaple
+files. If you recompile everything, it should be fine.
- .. TODO remove when the Python version is released
+.. TODO remove when the Python version is released
.. _troubleshooting-upload:
-Common upload problems
-----------------------
+========================
+ Common upload problems
+========================
My program is too large!
+------------------------
- First, make sure you're using the FLASH target instead of RAM;
- there is several times more FLASH memory available for user
- programs.
+First, make sure you're using the FLASH target instead of RAM; there
+is several times more FLASH memory available for user programs.
``No DFU capable USB device found``
+-----------------------------------
- This probably means you don't have a Maple plugged in or powered on!
+This probably means you don't have a Maple plugged in or powered on!
I have multiple Maples installed; how do I know which one will get flashed?
+---------------------------------------------------------------------------
- Because the Maple IDE uses DFU to upload programs, you can't
- select a particular Maple from the Serial Port menu to upload to a
- particular board. There's no solution to this problem for now:
- you'll have to just plug in the Maples one at a time. If this is a
- real problem let us know and we'll see if we can come up with a
- better solution.
+Because the Maple IDE uses DFU to upload programs, you can't select a
+particular Maple from the Serial Port menu to upload to a particular
+board. There's no solution to this problem for now: you'll have to
+just plug in the Maples one at a time. If this is a real problem let
+us know and we'll see if we can come up with a better solution.
.. _troubleshooting-shell:
-Command-line issues
--------------------
+=====================
+ Command-line issues
+=====================
My flash programs don't seem to stick; they behave like they are RAM!
+---------------------------------------------------------------------
- Make sure you :command:`make clean` when switching between FLASH
- and RAM targets; :command:`make` isn't smart enough to rebuild
- everything that needs to be for the new target.
+Make sure you :command:`make clean` when switching between FLASH and
+RAM targets; :command:`make` isn't smart enough to rebuild everything
+that needs to be for the new target.
[Linux] ``cdc_acm 3-1:1.0: no more free acm devices``
+-----------------------------------------------------
- This is a nasty one! It means that all 32 possible CDC_ACM serial
- devices (:file:`/dev/ttyACM25`, etc.) have been used up.
+This is a nasty one! It means that all 32 possible CDC_ACM serial
+devices (:file:`/dev/ttyACM25`, etc.) have been used up.
- The usual cause is using a serial port monitor and not closing it
- before restarting the Maple or uploading a new program. The
- operating system doesn't like that, and locks up that
- device. After reset the Maple comes back up as a new device. If
- you develop heavily and don't restart you'll blow right through
- all 32 devices.
+The usual cause is using a serial port monitor and not closing it
+before restarting the Maple or uploading a new program. The operating
+system doesn't like that, and locks up that device. After reset the
+Maple comes back up as a new device. If you develop heavily and don't
+restart you'll blow right through all 32 devices.
- The lazy solution is to always close the monitor before
- restarting, and if you get this error in :file:`dmesg` after a
- dfu-util "Not Found" error, restart you machine.
+The lazy solution is to always close the monitor before restarting,
+and if you get this error in :file:`dmesg` after a dfu-util "Not
+Found" error, restart you machine.
- The hacker solution is to restart your cdc_acm kernel module. On
- Ubuntu 09.10, this goes a little something like::
+The hacker solution is to restart your cdc_acm kernel module. On
+Ubuntu 09.10, this goes a little something like::
- $ sudo rmmod cdc-acm
- $ sudo insmod /lib/modules/2.6.31-20-generic/kernel/drivers/usb/class/cdc-acm.ko
+ $ sudo rmmod cdc-acm
+ $ sudo insmod /lib/modules/2.6.31-20-generic/kernel/drivers/usb/class/cdc-acm.ko
.. _troubleshooting-tips-tricks:
-Tips and Tricks
----------------
+=================
+ Tips and Tricks
+=================
.. _troubleshooting-perpetual-bootloader:
-**Perpetual Bootloader Mode**
+Perpetual Bootloader Mode
+-------------------------
In this mode, Maple stays a DFU device and does not jump to user code
until the next reset. This is useful for guaranteeing that your Maple
@@ -234,13 +215,13 @@ will be available for reprogramming.
To put your Maple into perpetual bootloader mode:
-1. Plug your Maple into the USB port.
+#. Plug your Maple into the USB port.
-2. Hit the reset button on your Maple (it's the small button at the
-bottom left, labeled RESET). Notice that it blinks quickly 6 times,
-then blinks slowly a few more times.
+#. Hit the reset button on your Maple (it's the small button at the
+ bottom left, labeled RESET). Notice that it blinks quickly 6
+ times, then blinks slowly a few more times.
-3. Hit reset again, and this time push and hold the other button
-during the 6 fast blinks (the button is on the top right; it is
-labeled BUT). You can release it once the slow blinks start.
+#. Hit reset again, and this time push and hold the other button
+ during the 6 fast blinks (the button is on the top right; it is
+ labeled BUT). You can release it once the slow blinks start.