diff options
| -rw-r--r-- | wirish/stm32f1/boards_setup.cpp | 16 | ||||
| -rw-r--r-- | wirish/stm32f2/boards_setup.cpp | 48 |
2 files changed, 36 insertions, 28 deletions
diff --git a/wirish/stm32f1/boards_setup.cpp b/wirish/stm32f1/boards_setup.cpp index d224ef2..11872d5 100644 --- a/wirish/stm32f1/boards_setup.cpp +++ b/wirish/stm32f1/boards_setup.cpp @@ -55,31 +55,31 @@ namespace wirish { namespace priv { static stm32f1_rcc_pll_data pll_data = {BOARD_RCC_PLLMUL}; - rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSE, &pll_data}; - adc_prescaler w_adc_pre = ADC_PRE_PCLK2_DIV_6; - adc_smp_rate w_adc_smp = ADC_SMPR_55_5; + __weak rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSE, &pll_data}; + __weak adc_prescaler w_adc_pre = ADC_PRE_PCLK2_DIV_6; + __weak adc_smp_rate w_adc_smp = ADC_SMPR_55_5; - void board_reset_pll(void) { + __weak void board_reset_pll(void) { // TODO } - void board_setup_clock_prescalers(void) { + __weak void board_setup_clock_prescalers(void) { rcc_set_prescaler(RCC_PRESCALER_AHB, RCC_AHB_SYSCLK_DIV_1); rcc_set_prescaler(RCC_PRESCALER_APB1, RCC_APB1_HCLK_DIV_2); rcc_set_prescaler(RCC_PRESCALER_APB2, RCC_APB2_HCLK_DIV_1); } - void board_setup_gpio(void) { + __weak void board_setup_gpio(void) { gpio_init_all(); } - void board_setup_usb(void) { + __weak void board_setup_usb(void) { #if BOARD_HAVE_SERIALUSB SerialUSB.begin(); #endif } - void series_init(void) { + __weak void series_init(void) { // Initialize AFIO here, too, so peripheral remaps and external // interrupts work out of the box. afio_init(); diff --git a/wirish/stm32f2/boards_setup.cpp b/wirish/stm32f2/boards_setup.cpp index 952e84d..876a65b 100644 --- a/wirish/stm32f2/boards_setup.cpp +++ b/wirish/stm32f2/boards_setup.cpp @@ -38,6 +38,7 @@ #include <libmaple/gpio.h> #include <libmaple/syscfg.h> +#include <libmaple/libmaple_types.h> #include <wirish/wirish_types.h> // PLL configuration for 25 MHz external oscillator --> 120 MHz SYSCLK. @@ -50,43 +51,50 @@ static stm32f2_rcc_pll_data pll_data = {PLL_Q, PLL_P, PLL_N, PLL_M}; namespace wirish { namespace priv { // PLL clocked off of HSE, with above configuration data. - rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSE, &pll_data}; - // As f_APB2 = 60 MHz (see board_setup_clock_prescalers), - // we need f_ADC = f_PCLK2 / 2 to get the (maximum) - // f_ADC = 30 MHz. - adc_prescaler w_adc_pre = ADC_PRE_PCLK2_DIV_2; - // With clocks as specified here (i.e. f_ADC = 30 MHz), this - // ADC sample rate allows for error less than 1/4 LSB with a - // 50 KOhm input impedance, assuming an internal sample and - // hold capacitance C_ADC at most 8.8 pF. See Equation 1 and - // Table 61 in the F2 datasheet for more details. - adc_smp_rate w_adc_smp = ADC_SMPR_144; + __weak rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSE, &pll_data}; - void board_reset_pll(void) { + // Global ADC prescaler + // + // On F2, with f_APB2 = 60 MHz, we need f_ADC = f_PCLK2 / 2 to + // get the (maximum) f_ADC = 30 MHz. + __weak adc_prescaler w_adc_pre = ADC_PRE_PCLK2_DIV_2; + + // Conservative ADC sample rate. Goal is error less than 1/4 + // LSB with 50 KOhm input impedance. + // + // On F2, with f_ADC = 30 MHz, error is acceptable assuming an + // internal sample and hold capacitance C_ADC at most 8.8 pF + // (ST doesn't specify the maximum C_ADC, so we had to take a + // guess). See Equation 1 and Table 61 in the F2 datasheet for + // more details. + __weak adc_smp_rate w_adc_smp = ADC_SMPR_144; + + __weak void board_reset_pll(void) { // Set PLLCFGR to its reset value. RCC_BASE->PLLCFGR = 0x24003010; // FIXME lose the magic number. } - void board_setup_clock_prescalers(void) { - // With f_SYSCLK = 120 MHz (as determined by board_pll_cfg), + __weak void board_setup_clock_prescalers(void) { + // On F2, with f_SYSCLK = 120 MHz (as determined by + // board_pll_cfg), // - // f_AHB = f_SYSCLK / 1 = 120 MHz + // f_AHB = f_SYSCLK / 1 = 120 MHz + // f_APB1 = f_AHB / 4 = 30 MHz + // f_APB2 = f_AHB / 2 = 60 MHz rcc_set_prescaler(RCC_PRESCALER_AHB, RCC_AHB_SYSCLK_DIV_1); - // f_APB1 = f_AHB / 4 = 30 MHz rcc_set_prescaler(RCC_PRESCALER_APB1, RCC_APB1_HCLK_DIV_4); - // f_APB2 = f_AHB / 2 = 60 MHz rcc_set_prescaler(RCC_PRESCALER_APB2, RCC_APB2_HCLK_DIV_2); } - void board_setup_gpio(void) { + __weak void board_setup_gpio(void) { gpio_init_all(); } - void board_setup_usb(void) { + __weak void board_setup_usb(void) { // Nothing to do. } - void series_init(void) { + __weak void series_init(void) { // We need SYSCFG for external interrupts syscfg_init(); // Turn on the I/O compensation cell, since we drive the |