aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--libmaple/gpio.c14
-rw-r--r--libmaple/gpio.h30
-rw-r--r--libmaple/i2c.c227
-rw-r--r--libmaple/i2c.h84
-rw-r--r--libmaple/systick.c4
-rw-r--r--libmaple/systick.h6
-rw-r--r--wirish/wirish_time.h2
7 files changed, 286 insertions, 81 deletions
diff --git a/libmaple/gpio.c b/libmaple/gpio.c
index 5484e21..c250f68 100644
--- a/libmaple/gpio.c
+++ b/libmaple/gpio.c
@@ -174,3 +174,17 @@ void afio_exti_select(afio_exti_num exti, afio_exti_port gpio_port) {
cr |= gpio_port << shift;
*exti_cr = cr;
}
+
+/**
+ * @brief Remap an alternate function peripheral to a different pin
+ * mapping
+ * @param peripheral to remap
+ */
+void afio_remap(AFIORemapPeripheral p) {
+ if (p & AFIO_REMAP_USE_MAPR2) {
+ p &= ~AFIO_REMAP_USE_MAPR2;
+ AFIO_BASE->MAPR2 |= p;
+ } else {
+ AFIO_BASE->MAPR |= p;
+ }
+}
diff --git a/libmaple/gpio.h b/libmaple/gpio.h
index 353f965..b15124c 100644
--- a/libmaple/gpio.h
+++ b/libmaple/gpio.h
@@ -315,6 +315,36 @@ typedef enum {
#define AFIO_MAPR2_TIM10_REMAP BIT(6)
#define AFIO_MAPR2_TIM9_REMAP BIT(5)
+/* HACK: Use upper bit to denote MAPR2, Bit 31 is reserved and
+ * not used in either MAPR or MAPR2 */
+#define AFIO_REMAP_USE_MAPR2 (1 << 31)
+typedef enum AFIORemapPeripheral {
+ AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP,
+ AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP,
+ AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP,
+ AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP,
+ AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP,
+ AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP,
+ AFIO_REMAP_CAN = AFIO_MAPR_CAN_REMAP,
+ AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP,
+ AFIO_REMAP_TIM3 = AFIO_MAPR_TIM3_REMAP,
+ AFIO_REMAP_TIM2 = AFIO_MAPR_TIM2_REMAP,
+ AFIO_REMAP_TIM1 = AFIO_MAPR_TIM1_REMAP,
+ AFIO_REMAP_USART3 = AFIO_MAPR_USART3_REMAP,
+ AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP,
+ AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP,
+ AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP,
+ AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP,
+ AFIO_REMAP_FSMC_NADV = AFIO_MAPR2_FSMC_NADV | AFIO_REMAP_USE_MAPR2,
+ AFIO_REMAP_TIM14 = AFIO_MAPR2_TIM14_REMAP | AFIO_REMAP_USE_MAPR2,
+ AFIO_REMAP_TIM13 = AFIO_MAPR2_TIM13_REMAP | AFIO_REMAP_USE_MAPR2,
+ AFIO_REMAP_TIM11 = AFIO_MAPR2_TIM11_REMAP | AFIO_REMAP_USE_MAPR2,
+ AFIO_REMAP_TIM10 = AFIO_MAPR2_TIM10_REMAP | AFIO_REMAP_USE_MAPR2,
+ AFIO_REMAP_TIM9 = AFIO_MAPR2_TIM9_REMAP | AFIO_REMAP_USE_MAPR2
+} AFIORemapPeripheral;
+
+void afio_remap(AFIORemapPeripheral p);
+
/*
* AFIO convenience routines
*/
diff --git a/libmaple/i2c.c b/libmaple/i2c.c
index f4cb522..5c8ee02 100644
--- a/libmaple/i2c.c
+++ b/libmaple/i2c.c
@@ -26,7 +26,8 @@
/**
* @file i2c.c
- * @brief Inter-Integrated Circuit (I2C) support.
+ * @brief Inter-Integrated Circuit (I2C) support. Currently supports only master
+ * mode.
*/
#include "libmaple.h"
@@ -36,8 +37,7 @@
#include "nvic.h"
#include "i2c.h"
#include "string.h"
-
-static inline int32 wait_for_state_change(i2c_dev *dev, i2c_state state);
+#include "systick.h"
static i2c_dev i2c_dev1 = {
.regs = I2C1_BASE,
@@ -47,9 +47,8 @@ static i2c_dev i2c_dev1 = {
.clk_line = RCC_I2C1,
.ev_nvic_line = NVIC_I2C1_EV,
.er_nvic_line = NVIC_I2C1_ER,
- .state = I2C_STATE_IDLE
+ .state = I2C_STATE_DISABLED
};
-
i2c_dev* const I2C1 = &i2c_dev1;
static i2c_dev i2c_dev2 = {
@@ -60,29 +59,52 @@ static i2c_dev i2c_dev2 = {
.clk_line = RCC_I2C2,
.ev_nvic_line = NVIC_I2C2_EV,
.er_nvic_line = NVIC_I2C2_ER,
- .state = I2C_STATE_IDLE
+ .state = I2C_STATE_DISABLED
};
-
i2c_dev* const I2C2 = &i2c_dev2;
-struct crumb {
- uint32 event;
- uint32 sr1;
- uint32 sr2;
-};
+static inline int32 wait_for_state_change(i2c_dev *dev,
+ i2c_state state,
+ uint32 timeout);
+
+/**
+ * @brief Fill data register with slave address
+ * @param dev i2c device
+ * @param addr slave address
+ * @param rw read/write bit
+ */
+static inline void i2c_send_slave_addr(i2c_dev *dev, uint32 addr, uint32 rw) {
+ dev->regs->DR = (addr << 1) | rw;
+}
+
+/*
+ * Simple debugging trail. Define I2C_DEBUG to turn on.
+ */
+#ifdef I2C_DEBUG
-#define NR_CRUMBS 128
+#define NR_CRUMBS 128
static struct crumb crumbs[NR_CRUMBS];
static uint32 cur_crumb = 0;
-static inline void leave_big_crumb(uint32 event, uint32 sr1, uint32 sr2) {
+static inline void i2c_drop_crumb(uint32 event, uint32 arg0, uint32 arg1) {
if (cur_crumb < NR_CRUMBS) {
struct crumb *crumb = &crumbs[cur_crumb++];
crumb->event = event;
- crumb->sr1 = sr1;
- crumb->sr2 = sr2;
+ crumb->arg0 = arg0;
+ crumb->arg1 = arg1;
}
}
+#define I2C_CRUMB(event, arg0, arg1) i2c_drop_crumb(event, arg0, arg1)
+
+#else
+#define I2C_CRUMB(event, arg0, arg1)
+#endif
+
+struct crumb {
+ uint32 event;
+ uint32 arg0;
+ uint32 arg1;
+};
enum {
IRQ_ENTRY = 1,
@@ -100,6 +122,7 @@ enum {
ERROR_ENTRY = 13,
};
+
/**
* @brief IRQ handler for i2c master. Handles transmission/reception.
* @param dev i2c device
@@ -111,7 +134,12 @@ static void i2c_irq_handler(i2c_dev *dev) {
uint32 sr1 = dev->regs->SR1;
uint32 sr2 = dev->regs->SR2;
- leave_big_crumb(IRQ_ENTRY, sr1, sr2);
+ I2C_CRUMB(IRQ_ENTRY, sr1, sr2);
+
+ /*
+ * Reset timeout counter
+ */
+ dev->timestamp = systick_uptime();
/*
* EV5: Start condition sent
@@ -145,10 +173,10 @@ static void i2c_irq_handler(i2c_dev *dev) {
i2c_disable_ack(dev);
if (dev->msgs_left > 1) {
i2c_start_condition(dev);
- leave_big_crumb(RX_ADDR_START, 0, 0);
+ I2C_CRUMB(RX_ADDR_START, 0, 0);
} else {
i2c_stop_condition(dev);
- leave_big_crumb(RX_ADDR_STOP, 0, 0);
+ I2C_CRUMB(RX_ADDR_STOP, 0, 0);
}
}
} else {
@@ -157,8 +185,9 @@ static void i2c_irq_handler(i2c_dev *dev) {
* register. We should get another TXE interrupt
* immediately to fill DR again.
*/
- if (msg->length != 1)
- i2c_write(dev, msg->data[msg->xferred++]);
+ if (msg->length != 1) {
+ i2c_write(dev, msg->data[msg->xferred++]);
+ }
}
sr1 = sr2 = 0;
}
@@ -169,7 +198,7 @@ static void i2c_irq_handler(i2c_dev *dev) {
* byte written.
*/
if ((sr1 & I2C_SR1_TXE) && !(sr1 & I2C_SR1_BTF)) {
- leave_big_crumb(TXE_ONLY, 0, 0);
+ I2C_CRUMB(TXE_ONLY, 0, 0);
if (dev->msgs_left) {
i2c_write(dev, msg->data[msg->xferred++]);
if (msg->xferred == msg->length) {
@@ -194,9 +223,9 @@ static void i2c_irq_handler(i2c_dev *dev) {
* Last byte sent, program repeated start/stop
*/
if ((sr1 & I2C_SR1_TXE) && (sr1 & I2C_SR1_BTF)) {
- leave_big_crumb(TXE_BTF, 0, 0);
+ I2C_CRUMB(TXE_BTF, 0, 0);
if (dev->msgs_left) {
- leave_big_crumb(TEST, 0, 0);
+ I2C_CRUMB(TEST, 0, 0);
/*
* Repeated start insanity: We can't disable ITEVTEN or else SB
* won't interrupt, but if we don't disable ITEVTEN, BTF will
@@ -216,7 +245,7 @@ static void i2c_irq_handler(i2c_dev *dev) {
* me.
*/
i2c_disable_irq(dev, I2C_IRQ_EVENT);
- leave_big_crumb(STOP_SENT, 0, 0);
+ I2C_CRUMB(STOP_SENT, 0, 0);
dev->state = I2C_STATE_XFER_DONE;
}
sr1 = sr2 = 0;
@@ -226,7 +255,7 @@ static void i2c_irq_handler(i2c_dev *dev) {
* EV7: Master Receiver
*/
if (sr1 & I2C_SR1_RXNE) {
- leave_big_crumb(RXNE_ONLY, 0, 0);
+ I2C_CRUMB(RXNE_ONLY, 0, 0);
msg->data[msg->xferred++] = dev->regs->DR;
/*
@@ -238,10 +267,10 @@ static void i2c_irq_handler(i2c_dev *dev) {
i2c_disable_ack(dev);
if (dev->msgs_left > 2) {
i2c_start_condition(dev);
- leave_big_crumb(RXNE_START_SENT, 0, 0);
+ I2C_CRUMB(RXNE_START_SENT, 0, 0);
} else {
i2c_stop_condition(dev);
- leave_big_crumb(RXNE_STOP_SENT, 0, 0);
+ I2C_CRUMB(RXNE_STOP_SENT, 0, 0);
}
} else if (msg->xferred == msg->length) {
dev->msgs_left--;
@@ -249,7 +278,7 @@ static void i2c_irq_handler(i2c_dev *dev) {
/*
* We're done.
*/
- leave_big_crumb(RXNE_DONE, 0, 0);
+ I2C_CRUMB(RXNE_DONE, 0, 0);
dev->state = I2C_STATE_XFER_DONE;
} else {
dev->msg++;
@@ -266,13 +295,25 @@ void __irq_i2c2_ev(void) {
i2c_irq_handler(&i2c_dev2);
}
+
+/**
+ * @brief Interrupt handler for i2c error conditions
+ * @param dev i2c device
+ * @sideeffect Aborts any pending i2c transactions
+ */
static void i2c_irq_error_handler(i2c_dev *dev) {
uint32 sr1 = dev->regs->SR1;
uint32 sr2 = dev->regs->SR2;
- leave_big_crumb(ERROR_ENTRY, sr1, sr2);
+ I2C_CRUMB(ERROR_ENTRY, sr1, sr2);
+
+ /* Clear flags */
+ dev->regs->SR1 = 0;
+ dev->regs->SR2 = 0;
i2c_stop_condition(dev);
i2c_disable_irq(dev, I2C_IRQ_BUFFER | I2C_IRQ_EVENT | I2C_IRQ_ERROR);
+ dev->error_flags = sr2 & (I2C_SR1_BERR | I2C_SR1_ARLO | I2C_SR1_AF |
+ I2C_SR1_OVR);
dev->state = I2C_STATE_ERROR;
}
@@ -284,7 +325,14 @@ void __irq_i2c2_er(void) {
i2c_irq_error_handler(&i2c_dev2);
}
-static void i2c_bus_reset(const i2c_dev *dev) {
+
+/**
+ * @brief Reset an i2c bus by clocking out pulses until any hung
+ * slaves release SDA and SCL, then generate a START condition, then
+ * a STOP condition.
+ * @param dev i2c device
+ */
+void i2c_bus_reset(const i2c_dev *dev) {
/* Release both lines */
gpio_write_bit(dev->gpio_port, dev->scl_pin, 1);
gpio_write_bit(dev->gpio_port, dev->sda_pin, 1);
@@ -335,16 +383,29 @@ void i2c_init(i2c_dev *dev) {
* @param dev Device to enable
* @param flags Bitwise or of the following I2C options:
* I2C_FAST_MODE: 400 khz operation
+ * I2C_DUTY_16_9: 16/9 Tlow/Thigh duty cycle (only applicable for fast mode)
+ * I2C_BUS_RESET: Reset the bus and clock out any hung slaves on initialization
* I2C_10BIT_ADDRESSING: Enable 10-bit addressing
+ * I2C_REMAP: Remap I2C1 to SCL/PB8 SDA/PB9
*/
void i2c_master_enable(i2c_dev *dev, uint32 flags) {
#define I2C_CLK (PCLK1/1000000)
-#define STANDARD_CCR (PCLK1/(100000*2))
-#define STANDARD_TRISE (I2C_CLK+1)
-#define FAST_CCR (I2C_CLK/10)
-#define FAST_TRISE ((I2C_CLK*3)/10+1)
+ uint32 ccr = 0;
+ uint32 trise = 0;
+
+ /* PE must be disabled to configure the device */
+ ASSERT(!(dev->regs->CR1 & I2C_CR1_PE));
+
+ if ((dev == I2C1) && (flags & I2C_REMAP)) {
+ afio_remap(AFIO_REMAP_I2C1);
+ I2C1->sda_pin = 9;
+ I2C1->scl_pin = 8;
+ }
+
/* Reset the bus. Clock out any hung slaves. */
- i2c_bus_reset(dev);
+ if (flags & I2C_BUS_RESET) {
+ i2c_bus_reset(dev);
+ }
/* Turn on clock and set GPIO modes */
i2c_init(dev);
@@ -354,22 +415,33 @@ void i2c_master_enable(i2c_dev *dev, uint32 flags) {
/* I2C1 and I2C2 are fed from APB1, clocked at 36MHz */
i2c_set_input_clk(dev, I2C_CLK);
- if(flags & I2C_FAST_MODE) {
- /* 400 kHz for fast mode, set DUTY and F/S bits */
- i2c_set_clk_control(dev, FAST_CCR|I2C_CCR_DUTY|I2C_CCR_FS);
+ if (flags & I2C_FAST_MODE) {
+ ccr |= I2C_CCR_FS;
- /* Set scl rise time, max rise time in fast mode: 300ns */
- i2c_set_trise(dev, FAST_TRISE);
+ if (flags & I2C_DUTY_16_9) {
+ /* Tlow/Thigh = 16/9 */
+ ccr |= I2C_CCR_DUTY;
+ ccr |= PCLK1/(400000 * 25);
+ } else {
+ /* Tlow/Thigh = 2 */
+ ccr |= PCLK1/(400000 * 3);
+ }
+ trise = (300 * (I2C_CLK)/1000) + 1;
} else {
+ /* Tlow/Thigh = 1 */
+ ccr = PCLK1/(100000 * 2);
+ trise = I2C_CLK + 1;
+ }
- /* 100 kHz for standard mode */
- i2c_set_clk_control(dev, STANDARD_CCR);
-
- /* Max rise time in standard mode: 1000 ns */
- i2c_set_trise(dev, STANDARD_TRISE);
+ /* Set minimum required value if CCR < 1*/
+ if ((ccr & I2C_CCR_CCR) == 0) {
+ ccr |= 0x1;
}
+ i2c_set_clk_control(dev, ccr);
+ i2c_set_trise(dev, trise);
+
/* Enable event and buffer interrupts */
nvic_irq_enable(dev->ev_nvic_line);
nvic_irq_enable(dev->er_nvic_line);
@@ -407,40 +479,81 @@ void i2c_master_enable(i2c_dev *dev, uint32 flags) {
/* Make it go! */
i2c_peripheral_enable(dev);
+
+ dev->state = I2C_STATE_IDLE;
}
-int32 i2c_master_xfer(i2c_dev *dev, i2c_msg *msgs, uint16 num) {
+
+/**
+ * @brief Process an i2c transaction. Transactions are composed of
+ * one or more i2c_msg's and may be read or write tranfers. Multiple i2c_msg's
+ * will generate a repeated start inbetween messages.
+ * @param dev i2c device
+ * @param msgs messages to send/receive
+ * @param num number of messages to send/receive
+ * @param timeout bus idle timeout in milliseconds before aborting the
+ * transfer. 0 denotes no timeout.
+ * @return 0 on success
+ * I2C_ERROR_PROTOCOL if there was a protocol error.
+ * I2C_ERROR_TIMEOUT if the transfer timed out.
+ */
+int32 i2c_master_xfer(i2c_dev *dev,
+ i2c_msg *msgs,
+ uint16 num,
+ uint32 timeout) {
int32 rc;
+ ASSERT(dev->state == I2C_STATE_IDLE);
+
dev->msg = msgs;
dev->msgs_left = num;
-
- while (dev->regs->SR2 & I2C_SR2_BUSY)
- ;
-
+ dev->timestamp = systick_uptime();
dev->state = I2C_STATE_BUSY;
- i2c_enable_irq(dev, I2C_IRQ_EVENT);
+ i2c_enable_irq(dev, I2C_IRQ_EVENT);
i2c_start_condition(dev);
- rc = wait_for_state_change(dev, I2C_STATE_XFER_DONE);
+
+ rc = wait_for_state_change(dev, I2C_STATE_XFER_DONE, timeout);
if (rc < 0) {
goto out;
}
dev->state = I2C_STATE_IDLE;
- rc = num;
out:
return rc;
}
-static inline int32 wait_for_state_change(i2c_dev *dev, i2c_state state) {
+
+/**
+ * @brief Wait for an i2c event, or timeout in case of error
+ * @param dev i2c device
+ * @param state i2c_state state to wait for
+ * @param timeout timeout in milliseconds
+ * @return 0 if target state is reached, <0 on error
+ */
+static inline int32 wait_for_state_change(i2c_dev *dev,
+ i2c_state state,
+ uint32 timeout) {
int32 rc;
i2c_state tmp;
while (1) {
tmp = dev->state;
- if ((tmp == state) || (tmp == I2C_STATE_ERROR)) {
- return (tmp == I2C_STATE_ERROR) ? -1 : 0;
+
+ if (tmp == I2C_STATE_ERROR) {
+ return I2C_STATE_ERROR;
+ }
+
+ if (tmp == state) {
+ return 0;
+ }
+
+ if (timeout) {
+ if (systick_uptime() > (dev->timestamp + timeout)) {
+ /* TODO: overflow? */
+ /* TODO: racy? */
+ return I2C_ERROR_TIMEOUT;
+ }
}
}
}
diff --git a/libmaple/i2c.h b/libmaple/i2c.h
index 3f351b2..3fd7133 100644
--- a/libmaple/i2c.h
+++ b/libmaple/i2c.h
@@ -45,9 +45,10 @@ typedef struct i2c_reg_map {
} i2c_reg_map;
typedef enum i2c_state {
- I2C_STATE_IDLE,
- I2C_STATE_XFER_DONE,
- I2C_STATE_BUSY,
+ I2C_STATE_DISABLED = 0,
+ I2C_STATE_IDLE = 1,
+ I2C_STATE_XFER_DONE = 2,
+ I2C_STATE_BUSY = 3,
I2C_STATE_ERROR = -1
} i2c_state;
@@ -72,6 +73,8 @@ typedef struct i2c_dev {
volatile uint8 state;
uint16 msgs_left;
i2c_msg *msg;
+ volatile uint32 timestamp;
+ uint32 error_flags;
} i2c_dev;
extern i2c_dev* const I2C1;
@@ -80,10 +83,6 @@ extern i2c_dev* const I2C2;
#define I2C1_BASE (i2c_reg_map*)0x40005400
#define I2C2_BASE (i2c_reg_map*)0x40005800
-/* i2c enable options */
-#define I2C_FAST_MODE 0x1 // 400 khz
-#define I2C_DUTY_16_9 0x2 // 16/9 duty ratio
-
/* Control register 1 bits */
#define I2C_CR1_SWRST BIT(15) // Software reset
#define I2C_CR1_ALERT BIT(13) // SMBus alert
@@ -137,9 +136,23 @@ extern i2c_dev* const I2C2;
extern "C" {
#endif
-void i2c_init(i2c_dev *dev);
+/* i2c enable options */
+#define I2C_FAST_MODE BIT(0) // 400 khz
+#define I2C_DUTY_16_9 BIT(1) // 16/9 duty ratio
+#define I2C_REMAP BIT(2) // Use alternate pin mapping
+#define I2C_BUS_RESET BIT(3) // Perform a bus reset
void i2c_master_enable(i2c_dev *dev, uint32 flags);
-int32 i2c_master_xfer(i2c_dev *dev, i2c_msg *msgs, uint16 num);
+
+#define I2C_ERROR_PROTOCOL (-1)
+#define I2C_ERROR_TIMEOUT (-2)
+int32 i2c_master_xfer(i2c_dev *dev, i2c_msg *msgs, uint16 num, uint32 timeout);
+
+void i2c_bus_reset(const i2c_dev *dev);
+
+static inline void i2c_disable(i2c_dev *dev) {
+ dev->regs->CR1 &= ~I2C_CR1_PE;
+ dev->state = I2C_STATE_DISABLED;
+}
/*
* Low level register twiddling functions
@@ -195,22 +208,22 @@ static inline void i2c_set_clk_control(i2c_dev *dev, uint32 val) {
dev->regs->CCR = ccr;
}
-static inline void i2c_set_fast_mode(i2c_dev *dev) {
- dev->regs->CCR |= I2C_CCR_FS;
-}
-
-static inline void i2c_set_standard_mode(i2c_dev *dev) {
- dev->regs->CCR &= ~I2C_CCR_FS;
-}
/**
* @brief Set SCL rise time
- * @param
+ * @param dev device to configure
+ * @param trise Maximum rise time in fast/standard mode (See RM008 for
+ * formula)
*/
static inline void i2c_set_trise(i2c_dev *dev, uint32 trise) {
dev->regs->TRISE = trise;
}
+
+/**
+ * @brief Generate a start condition on the bus.
+ * @param device i2c device to use
+ */
static inline void i2c_start_condition(i2c_dev *dev) {
uint32 cr1;
while ((cr1 = dev->regs->CR1) & (I2C_CR1_START |
@@ -221,6 +234,10 @@ static inline void i2c_start_condition(i2c_dev *dev) {
dev->regs->CR1 |= I2C_CR1_START;
}
+/**
+ * @brief Generate a stop condition on the bus
+ * @param device i2c device to use
+ */
static inline void i2c_stop_condition(i2c_dev *dev) {
uint32 cr1;
while ((cr1 = dev->regs->CR1) & (I2C_CR1_START |
@@ -229,12 +246,22 @@ static inline void i2c_stop_condition(i2c_dev *dev) {
;
}
dev->regs->CR1 |= I2C_CR1_STOP;
-}
+ while ((cr1 = dev->regs->CR1) & (I2C_CR1_START |
+ I2C_CR1_STOP |
+ I2C_CR1_PEC)) {
+ ;
+ }
-static inline void i2c_send_slave_addr(i2c_dev *dev, uint32 addr, uint32 rw) {
- dev->regs->DR = (addr << 1) | rw;
}
+/**
+ * @brief Enable one or more i2c interrupts
+ * @param dev i2c device
+ * @param irqs bitwise-or of:
+ * I2C_IRQ_ERROR: Error interrupt
+ * I2C_IRQ_EVENT: Event interrupt
+ * I2C_IRQ_BUFFER: Buffer interrupt
+ */
#define I2C_IRQ_ERROR I2C_CR2_ITERREN
#define I2C_IRQ_EVENT I2C_CR2_ITEVTEN
#define I2C_IRQ_BUFFER I2C_CR2_ITBUFEN
@@ -242,14 +269,31 @@ static inline void i2c_enable_irq(i2c_dev *dev, uint32 irqs) {
dev->regs->CR2 |= irqs;
}
+/**
+ * @brief Disable one or more i2c interrupts
+ * @param dev i2c device
+ * @param irqs bitwise-or of:
+ * I2C_IRQ_ERROR: Error interrupt
+ * I2C_IRQ_EVENT: Event interrupt
+ * I2C_IRQ_BUFFER: Buffer interrupt
+ */
static inline void i2c_disable_irq(i2c_dev *dev, uint32 irqs) {
dev->regs->CR2 &= ~irqs;
}
+
+/**
+ * @brief Enable i2c acknowledgment
+ * @param dev i2c device
+ */
static inline void i2c_enable_ack(i2c_dev *dev) {
dev->regs->CR1 |= I2C_CR1_ACK;
}
+/**
+ * @brief Disable i2c acknowledgment
+ * @param dev i2c device
+ */
static inline void i2c_disable_ack(i2c_dev *dev) {
dev->regs->CR1 &= ~I2C_CR1_ACK;
}
diff --git a/libmaple/systick.c b/libmaple/systick.c
index c04f4f3..7582436 100644
--- a/libmaple/systick.c
+++ b/libmaple/systick.c
@@ -28,7 +28,7 @@
#include "systick.h"
-volatile uint32 systick_timer_millis;
+volatile uint32 systick_uptime_millis;
/**
* @brief Initialize and enable SysTick.
@@ -67,5 +67,5 @@ void systick_enable() {
*/
void __exc_systick(void) {
- systick_timer_millis++;
+ systick_uptime_millis++;
}
diff --git a/libmaple/systick.h b/libmaple/systick.h
index 35b4cb9..9d6d3b9 100644
--- a/libmaple/systick.h
+++ b/libmaple/systick.h
@@ -73,7 +73,11 @@ typedef struct systick_reg_map {
#define SYSTICK_CVR_TENMS 0xFFFFFF
/** System elapsed time, in milliseconds */
-extern volatile uint32 systick_timer_millis;
+extern volatile uint32 systick_uptime_millis;
+
+static inline uint32 systick_uptime(void) {
+ return systick_uptime_millis;
+}
void systick_init(uint32 reload_val);
void systick_disable();
diff --git a/wirish/wirish_time.h b/wirish/wirish_time.h
index d5349e3..e326ea7 100644
--- a/wirish/wirish_time.h
+++ b/wirish/wirish_time.h
@@ -43,7 +43,7 @@
* @see micros()
*/
static inline uint32 millis(void) {
- return systick_timer_millis;
+ return systick_uptime();
}
/**