Merge branch 'wip-family-support'

Merge the long-lived (too long; future changes like these will need to
proceed more incrementally) development branch of libmaple, containing
experimental STM32F2 and STM32F1 value line support, into master.

This required many changes to the structure of the library. The most
important structural reorganizations occurred in:

- 954f9e5: moves public headers to include directories
- 3efa313: uses "series" instead of "family"
- c0d60e3: adds board files to the build system, to make it easier to
  add new boards
- 096d86c: adds build logic for targeting different STM32 series
  (e.g. STM32F1, STM32F2)

This last commit in particular (096d86c) is the basis for the
repartitioning of libmaple into portable sections, which work on all
supported MCUs, and nonportable sections, which are segregated into
separate directories and contain all series-specific code. Moving
existing STM32F1-only code into libmaple/stm32f1 and wirish/stm32f1,
along with adding equivalents under .../stm32f2 directories, was the
principal project of this branch.

Important API changes occur in several places. Existing code is still
expected to work on STM32F1 targets, but there have been many
deprecations. A detailed changelog explaining the situation needs to
be prepared.

F2 and F1 value line support is not complete; the merge is proceeding
prematurely in this respect. We've been getting more libmaple patches
from the community lately, and I'm worried that the merge conflicts
with the old tree structure will become painful to manage.

Conflicts:
	Makefile

Resolved Makefile conflicts manually; this required propagating
-Xlinker usage into support/make/target-config.mk.

Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>

1 files changed, 89 insertions, 0 deletions

diff --git a/wirish/stm32f1/boards_setup.cpp b/wirish/stm32f1/boards_setup.cpp
new file mode 100644
index 0000000..11872d5
--- /dev/null
+++ b/wirish/stm32f1/boards_setup.cpp
@@ -0,0 +1,89 @@
+/******************************************************************************
+ * The MIT License
+ *
+ * Copyright (c) 2012 LeafLabs, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+*****************************************************************************/
+
+/**
+ * @file wirish/stm32f1/boards_setup.cpp
+ * @author Marti Bolivar <mbolivar@leaflabs.com>
+ * @brief STM32F1 chip setup.
+ *
+ * This file controls how init() behaves on the STM32F1. Be very
+ * careful when changing anything here. Many of these values depend
+ * upon each other.
+ */
+
+#include "boards_private.h"
+
+#include <libmaple/gpio.h>
+#include <libmaple/timer.h>
+
+#include <wirish/boards.h>
+#include <wirish/usb_serial.h>
+
+// Allow boards to provide a PLL multiplier. This is useful for
+// e.g. STM32F100 value line MCUs, which use slower multipliers.
+// (We're leaving the default to RCC_PLLMUL_9 for now, since that
+// works for F103 performance line MCUs, which is all that LeafLabs
+// currently officially supports).
+#ifndef BOARD_RCC_PLLMUL
+#define BOARD_RCC_PLLMUL RCC_PLLMUL_9
+#endif
+
+namespace wirish {
+    namespace priv {
+
+        static stm32f1_rcc_pll_data pll_data = {BOARD_RCC_PLLMUL};
+        __weak rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSE, &pll_data};
+        __weak adc_prescaler w_adc_pre = ADC_PRE_PCLK2_DIV_6;
+        __weak adc_smp_rate w_adc_smp = ADC_SMPR_55_5;
+
+        __weak void board_reset_pll(void) {
+            // TODO
+        }
+
+        __weak void board_setup_clock_prescalers(void) {
+            rcc_set_prescaler(RCC_PRESCALER_AHB, RCC_AHB_SYSCLK_DIV_1);
+            rcc_set_prescaler(RCC_PRESCALER_APB1, RCC_APB1_HCLK_DIV_2);
+            rcc_set_prescaler(RCC_PRESCALER_APB2, RCC_APB2_HCLK_DIV_1);
+        }
+
+        __weak void board_setup_gpio(void) {
+            gpio_init_all();
+        }
+
+        __weak void board_setup_usb(void) {
+#if BOARD_HAVE_SERIALUSB
+            SerialUSB.begin();
+#endif
+        }
+
+        __weak void series_init(void) {
+            // Initialize AFIO here, too, so peripheral remaps and external
+            // interrupts work out of the box.
+            afio_init();
+        }
+
+    }
+}