diff options
| author | Marti Bolivar <mbolivar@leaflabs.com> | 2011-09-13 01:32:09 -0400 |
|---|---|---|
| committer | Marti Bolivar <mbolivar@leaflabs.com> | 2011-09-13 02:22:15 -0400 |
| commit | af9c6c9f7143067fb48f5bb3eb1474003dcb5017 (patch) | |
| tree | 777805f9533b7e8712a6818f4710881551e6dde1 /support/make | |
| parent | 4ae5f1d1818b6c00d49c00393b4b4339b3c72c48 (diff) | |
| download | librambutan-af9c6c9f7143067fb48f5bb3eb1474003dcb5017.tar.gz librambutan-af9c6c9f7143067fb48f5bb3eb1474003dcb5017.zip | |
[make] Factor out target/board configuration.
Comment the Makefile more verbosely. It's been causing confusion on
the forums.
Add target-config.mk, this contains build configuration depending on
the BOARD and MEMORY_TARGET variables. Its contents were cluttering
up the Makefile and making it harder to read.
Diffstat (limited to 'support/make')
| -rw-r--r-- | support/make/target-config.mk | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/support/make/target-config.mk b/support/make/target-config.mk new file mode 100644 index 0000000..a30a5da --- /dev/null +++ b/support/make/target-config.mk @@ -0,0 +1,56 @@ +# Board-specific configuration values. Flash and SRAM sizes in bytes. + +ifeq ($(BOARD), maple) + MCU := STM32F103RB + PRODUCT_ID := 0003 + ERROR_LED_PORT := GPIOA + ERROR_LED_PIN := 5 + DENSITY := STM32_MEDIUM_DENSITY + FLASH_SIZE := 131072 + SRAM_SIZE := 20480 +endif + +ifeq ($(BOARD), maple_native) + MCU := STM32F103ZE + PRODUCT_ID := 0003 + ERROR_LED_PORT := GPIOC + ERROR_LED_PIN := 15 + DENSITY := STM32_HIGH_DENSITY + FLASH_SIZE := 524288 + SRAM_SIZE := 65536 +endif + +ifeq ($(BOARD), maple_mini) + MCU := STM32F103CB + PRODUCT_ID := 0003 + ERROR_LED_PORT := GPIOB + ERROR_LED_PIN := 1 + DENSITY := STM32_MEDIUM_DENSITY + FLASH_SIZE := 131072 + SRAM_SIZE := 20480 +endif + +ifeq ($(BOARD), maple_RET6) + MCU := STM32F103RE + PRODUCT_ID := 0003 + ERROR_LED_PORT := GPIOA + ERROR_LED_PIN := 5 + DENSITY := STM32_HIGH_DENSITY + FLASH_SIZE := 524288 + SRAM_SIZE := 65536 +endif + +# Memory target-specific configuration values + +ifeq ($(MEMORY_TARGET), ram) + LDSCRIPT := $(BOARD)/ram.ld + VECT_BASE_ADDR := VECT_TAB_RAM +endif +ifeq ($(MEMORY_TARGET), flash) + LDSCRIPT := $(BOARD)/flash.ld + VECT_BASE_ADDR := VECT_TAB_FLASH +endif +ifeq ($(MEMORY_TARGET), jtag) + LDSCRIPT := $(BOARD)/jtag.ld + VECT_BASE_ADDR := VECT_TAB_BASE +endif |