enabled serial3

git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@109 749a229e-a60e-11de-b98f-4500b42dc123

2 files changed, 24 insertions, 6 deletions

diff --git a/src/lib/usart.c b/src/lib/usart.c
index a06690e..76685fd 100644
--- a/src/lib/usart.c
+++ b/src/lib/usart.c
@@ -83,7 +83,12 @@ void USART2_IRQHandler(void) {
     ring_buf2.buf[ring_buf2.tail++] = (uint8_t)(((usart_port*)(USART2_BASE))->DR);
     ring_buf2.tail %= USART_RECV_BUF_SIZE;
 }
-
+/* Don't overrun your buffer, seriously  */
+void USART3_IRQHandler(void) {
+    /* Read the data  */
+    ring_buf3.buf[ring_buf2.tail++] = (uint8_t)(((usart_port*)(USART3_BASE))->DR);
+    ring_buf3.tail %= USART_RECV_BUF_SIZE;
+}
 
 /**
  *  @brief Enable a USART in single buffer transmission mode, multibuffer
@@ -124,6 +129,7 @@ void usart_init(uint8 usart_num, uint32 baud) {
         port = (usart_port*)USART3_BASE;
         ring_buf = &ring_buf3;
         clk_speed = USART3_CLK;
+        RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
         break;
     default:
         /* should never get here  */
diff --git a/src/main.cpp b/src/main.cpp
index b260bd0..edd4fbb 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -1,19 +1,31 @@
 #include "wiring.h"

 #include "HardwareSerial.h"

 #include "wiring_math.h"

+#include "HardwareUsb.h"

 #include "usb.h"

 

+//HardwareUsb USB;

+

 int ledPin = 13;

-int toggle=0;

 void setup() {

     pinMode(ledPin,OUTPUT);

+    Serial2.begin(9600);

+    Serial3.begin(9600);

 }

 

+volatile int toggle = 1;

+

 void loop() {

-    digitalWrite(ledPin, HIGH);

-    delay(1000);

-    digitalWrite(ledPin,LOW);

-    delay(1000);

+    digitalWrite(ledPin, toggle);

+    toggle ^= 1;

+    delay(500);

+//    USB.print(millis());

+//    USB.println("\r");

+    Serial2.print(millis(), DEC);

+    Serial3.print(millis(), DEC);

+    Serial3.print(": ");

+//    Serial3.print(USB.available(), DEC);

+    Serial3.println();

 }

 

 int main(void) {