diff options
| author | iperry <iperry@749a229e-a60e-11de-b98f-4500b42dc123> | 2009-12-17 02:37:07 +0000 |
|---|---|---|
| committer | iperry <iperry@749a229e-a60e-11de-b98f-4500b42dc123> | 2009-12-17 02:37:07 +0000 |
| commit | 32e57dac2e61e79b029593eb4d34d727bcc10678 (patch) | |
| tree | 98d7ff41993576bb150d13d5f63dc744f6812852 /src/stm32lib/examples/USART/Smartcard/readme.txt | |
| download | librambutan-32e57dac2e61e79b029593eb4d34d727bcc10678.tar.gz librambutan-32e57dac2e61e79b029593eb4d34d727bcc10678.zip | |
Initial commit of library code, moved from leaftest repo
git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@69 749a229e-a60e-11de-b98f-4500b42dc123
Diffstat (limited to 'src/stm32lib/examples/USART/Smartcard/readme.txt')
| -rwxr-xr-x | src/stm32lib/examples/USART/Smartcard/readme.txt | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/src/stm32lib/examples/USART/Smartcard/readme.txt b/src/stm32lib/examples/USART/Smartcard/readme.txt new file mode 100755 index 0000000..615be2a --- /dev/null +++ b/src/stm32lib/examples/USART/Smartcard/readme.txt @@ -0,0 +1,87 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : readme.txt
+* Author : MCD Application Team
+* Version : V2.0.1
+* Date : 06/13/2008
+* Description : Description of the USART Smartcard Example.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+Example description
+===================
+This example provides a description of how to use the USART in Smartcard mode.
+The example gives only the possibility to read the ATR and decode it into
+predefined buffer.
+First, the code is waiting for an card insertion. If a card is detected through
+the EXTI Line interrupt (connected to the Smartcard detect pin), a reset signal
+is applied to the card through its reset pin.
+As response to this reset, the card transmit the ATR which will be stored in
+predefined buffer. Once the ATR is received, it is decoded and stored in a specific
+structure (SC_A2R) and the card protocol type is stored in a variable.
+ATRDecodeStatus variable must be equal to 1 (PASSED) when the sequence succeed.
+
+The used Smartcard should be ISO7816-3 T=0 compatible.
+
+USART3 configured as follow:
+ - Word Length = 9 Bits
+ - 0.5 Stop Bit
+ - Even parity
+ - BaudRate = 12096 baud
+ - Hardware flow control disabled (RTS and CTS signals)
+ - Tx and Rx enabled
+ - USART Clock enabled
+ - USART CPOL: Clock is active low
+ - USART CPHA: Data is captured on the second edge
+ - USART LastBit: The clock pulse of the last data bit is not output to
+ the SCLK pin
+
+
+Directory contents
+==================
+platform_config.h Evaluation board specific configuration file
+stm32f10x_conf.h Library Configuration file
+stm32f10x_it.h Interrupt handlers header file
+stm32f10x_it.c Interrupt handlers
+main.c Main program
+
+
+Hardware environment
+====================
+This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
+boards and can be easily tailored to any other hardware.
+To select the STMicroelectronics evaluation board used to run the example, uncomment
+the corresponding line in platform_config.h file.
+
+ + STM3210B-EVAL
+ - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard
+ connector CN16.
+
+ + STM3210E-EVAL
+ - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard
+ connector CN18.
+ - Make sure that Jumper 15 (JP15) and Jumper 16 (JP16) are fitted.
+
+
+How to use it
+=============
+In order to make the program work, you must do the following :
+- Create a project and setup all your toolchain's start-up files
+- Compile the directory content files and required Library files :
+ + stm32f10x_lib.c
+ + stm32f10x_gpio.c
+ + stm32f10x_rcc.c
+ + stm32f10x_usart.c
+ + stm32f10x_nvic.c
+ + stm32f10x_flash.c
+ + stm32f10x_exti.c
+
+- Link all compiled files and load your image into target memory
+- Run the example
+
+******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******
|