removed extraneous files, stm32lib examples

git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@70 749a229e-a60e-11de-b98f-4500b42dc123

1 files changed, 0 insertions, 71 deletions

diff --git a/src/stm32lib/examples/TIM/OnePulse/readme.txt b/src/stm32lib/examples/TIM/OnePulse/readme.txt
deleted file mode 100755
index 5f00278..0000000
--- a/src/stm32lib/examples/TIM/OnePulse/readme.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************

-* File Name          : readme.txt

-* Author             : MCD Application Team

-* Version            : V2.0.1

-* Date               : 06/13/2008

-* Description        : Description of the TIM OnePulse example.

-********************************************************************************

-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.

-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,

-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE

-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING

-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

-*******************************************************************************/

-

-Example description

-===================

-

-This example shows how to use the TIM peripheral to generate a One pulse Mode 

-after a Rising edge of an external signal is received in Timer Input pin.

-

-The TIM2CLK frequency is set to 72 MHz, the Prescaler is 1 so the TIM2 counter

-clock is 36 MHz. 

-The Autoreload value is 65535 (TIM2->ARR), so the maximum frequency value to trigger 

-the TIM2 input is 500 Hz.

-

-The TIM2 is configured as follows: 

-The One Pulse mode is used, the external signal is connected to TIM2 CH2 pin (PA.01), 

-the Rising edge is used as active edge, the One Pulse signal is output 

-on TIM2_CH1 (PA.00).

-

-The TIM_Pulse defines the delay value, the delay value is fixed to 455.08 us:

-delay =  CCR1/TIM2 counter clock = 455.08 us. 

-The (TIM_Period - TIM_Pulse) defines the One Pulse value, the pulse value is fixed to 1.365ms:

-One Pulse value = (TIM_Period - TIM_Pulse)/TIM2 counter clock = 1.365 ms.

-

-

-Directory contents

-==================

-stm32f10x_conf.h  Library Configuration file

-stm32f10x_it.c    Interrupt handlers

-stm32f10x_it.h    Interrupt handlers header file

-main.c            Main program

- 

-

-Hardware environment

-====================

-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation

-boards and can be easily tailored to any other hardware.

-

-- Connect the external signal to the TIM2_CH2 pin (PA.01)

-- Connect the TIM2_CH1 (PA.00) pin to an oscilloscope to monitor the waveform.

-   

-  

-How to use it

-=============

-In order to make the program work, you must do the following:

-- Create a project and setup all your toolchain's start-up files

-- Compile the directory content files and required Library files:

-  + stm32f10x_lib.c

-  + stm32f10x_tim.c

-  + stm32f10x_gpio.c

-  + stm32f10x_rcc.c

-  + stm32f10x_nvic.c

-  + stm32f10x_flash.c

-

-- Link all compiled files and load your image into target memory

-- Run the example

-

-

-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******