aboutsummaryrefslogtreecommitdiffstats
path: root/source
diff options
context:
space:
mode:
authorMarti Bolivar <mbolivar@leaflabs.com>2011-09-09 15:01:48 -0400
committerMarti Bolivar <mbolivar@leaflabs.com>2011-09-09 15:01:48 -0400
commita7730c06101abc1df43099010cbc4f16fd674b20 (patch)
tree93b03e120713c8615595133a7471cfa3ee72a4f6 /source
parent34f616aaa0e8dadb4adda4341e38e8edb1b41c32 (diff)
downloadlibrambutan-a7730c06101abc1df43099010cbc4f16fd674b20.tar.gz
librambutan-a7730c06101abc1df43099010cbc4f16fd674b20.zip
bootloader: Remove Maple-specific values.
Diffstat (limited to 'source')
-rw-r--r--source/bootloader.rst10
1 files changed, 4 insertions, 6 deletions
diff --git a/source/bootloader.rst b/source/bootloader.rst
index d3a1abb..1a0fa6d 100644
--- a/source/bootloader.rst
+++ b/source/bootloader.rst
@@ -649,15 +649,13 @@ could use another Maple, an Arduino, etc. -- anything that allows your
computer to communicate with the Maple you want to reprogram over a
serial interface.
-.. FIXME [0.0.12, Maple-specific values]
-
If you do use an FTDI breakout board, first make sure your Maple is
disconnected from an external power source, be it battery, USB, or
barrel jack. Then, connect the FTDI board's TX pin to ``Serial1``\ 's
-RX pin (pin 8 on Maple), FTDI RX to ``Serial1`` TX (pin 7 on Maple),
-FTDI ground to ground (labeled GND), and its 3.3V pin to Vin. On
-Maple Mini, you will also need to tie BOOT1 (pin 2) to ground. You
-can use the silkscreen for help locating these pins on other boards.
+RX pin (labeled "RX1" on the silkscreen), FTDI RX to ``Serial1`` TX
+(labeled "TX1"), FTDI ground to ground (labeled GND), and its 3.3V pin
+to Vin. On Maple Mini, you will also need to tie BOOT1 (pin 2) to
+ground.
More information on ``Serial1`` is available :ref:`here
<lang-serial>`.