Documentation bugfixes

3 files changed, 39 insertions, 21 deletions

diff --git a/source/lang/api/attachinterrupt.rst b/source/lang/api/attachinterrupt.rst
index 0b8907f..7c5a6c7 100644
--- a/source/lang/api/attachinterrupt.rst
+++ b/source/lang/api/attachinterrupt.rst
@@ -15,7 +15,28 @@ occurs.
 Library Documentation
 ---------------------
 
-.. doxygenfunction:: attachInterrupt
+.. FIXME once breathe knows how to get the correct attachInterupt
+.. (right now it's copying from HardwareTimer), replace with a
+.. doxygenfunction directive
+
+.. cpp:function:: void attachInterrupt(uint8 pin, voidFuncPtr handler, ExtIntTriggerMode mode)
+
+   Registers an interrupt handler on a pin.
+
+   The interrupt will be triggered on a given transition on the pin,
+   as specified by the mode parameter.  The handler runs in interrupt
+   context.  The new handler will replace whatever handler is
+   currently registered for the pin, if any.
+
+   *Parameters*
+
+      - ``pin`` - Maple pin number
+
+      - ``handler`` - Function to run upon external interrupt trigger.
+        The handler should take no arguments, and have void return type.
+
+      - ``mode`` - Type of transition to trigger on, e.g. falling,
+        rising, etc.
 
 .. doxygenenum:: ExtIntTriggerMode
 
@@ -34,7 +55,6 @@ There are a few constraints you should be aware of if you're using
 more than one interrupt at a time; the :ref:`external-interrupts` page
 has the details.
 
-
 Using Interrupts
 ----------------
 
@@ -43,7 +63,6 @@ microcontroller programs, and can help solve timing problems. A
 good task for using an interrupt might be reading a rotary encoder,
 or monitoring user input.
 
-
 If you wanted to insure that a program always caught the pulses
 from a rotary encoder, never missing a pulse, it would make it very
 tricky to write a program to do anything else, because the program
@@ -55,7 +74,6 @@ sensor that is trying to catch a click, or an infrared slot sensor
 situations, using an interrupt can free the microcontroller to get
 some other work done while not missing the doorbell.
 
-
 Example
 -------
 
@@ -78,7 +96,6 @@ Example
       state = !state;
     }
 
-
 Arduino Compatibility
 ---------------------
 
@@ -89,14 +106,10 @@ additional four: numbers 2 (pin 21), 3 (pin 20), 4 (pin 19), and 5
 number goes with which pin -- just tell ``attachInterrupt()`` the pin
 you want.
 
-
 See also
 --------
 
-
 -  :ref:`detachInterrupt <lang-detachinterrupt>`
 -  :ref:`external-interrupts`
 
-
-
 .. include:: cc-attribution.txt
diff --git a/source/lang/api/detachinterrupt.rst b/source/lang/api/detachinterrupt.rst
index adb2439..41642a7 100644
--- a/source/lang/api/detachinterrupt.rst
+++ b/source/lang/api/detachinterrupt.rst
@@ -6,11 +6,20 @@ detachInterrupt()
 Used to disable an interrupt specified with
 :ref:`lang-attachinterrupt`\ .
 
-
 Library Documentation
 ---------------------
 
-.. doxygenfunction:: detachInterrupt
+.. FIXME once breathe knows how to get the correct detachInterupt
+.. (right now it's copying from HardwareTimer), replace with a
+.. doxygenfunction directive
+
+.. cpp:function:: void detachInterrupt(uint8 pin)
+
+   Disable any registered external interrupt on the given pin.
+
+   *Parameters*
+
+       - ``pin`` Maple pin number
 
 Arduino Compatibility
 ---------------------
@@ -31,7 +40,4 @@ See Also
 
 - :ref:`attachInterrupt() <lang-attachInterrupt>`
 
-
-
-
 .. include:: cc-attribution.txt
diff --git a/source/lang/api/pwmwrite.rst b/source/lang/api/pwmwrite.rst
index 2c858ab..9d50077 100644
--- a/source/lang/api/pwmwrite.rst
+++ b/source/lang/api/pwmwrite.rst
@@ -33,21 +33,20 @@ Sets the output to the LED proportional to the value read from the
 potentiometer::
 
     int analogPin = 3;    // potentiometer connected to analog pin 3
-    int val = 0;          // variable to store the read value
 
     void setup() {
       pinMode(BOARD_LED_PIN, OUTPUT);   // sets the LED pin as output
 
-      pinMode(analogPin, PWM);   // sets the potentiometer pin as PWM
-                                 // output
+      pinMode(analogPin, INPUT_ANALOG); // sets the potentiometer pin as
+                                        // analog input
     }
 
     void loop() {
-      val = analogRead(analogPin);   // read the input pin
+      int val = analogRead(analogPin);        // read the input pin
 
-      analogWrite(BOARD_LED_PIN, val / 16);  // analogRead values go from 0
-                                             // to 4095, analogWrite values
-                                             // from 0 to 65535
+      pwmWrite(BOARD_LED_PIN, val * 16);  // analogRead values go from 0
+                                          // to 4095, pwmWrite values
+                                          // from 0 to 65535, so scale roughly
     }
 
 See Also