Slightly improve and generify the USB infrastructure.

The good news is that <libmaple/usb.h> and <libmaple/usb_cdcacm.h> did
turn out generic enough in what they specify to go on unchanged.

However, we can't just go on assuming that there's USB just because
we're on an F1. Now that there's value line in the tree, we need to be
more careful (value line F1s don't have USB peripherals). To that end,
make all the F1 board-includes/*.mk files specify what line their MCU
is with an MCU_F1_LINE variable. Use that to hack
libmaple/usb/rules.mk so we only try to build the USB module under
appropriate circumstances.

While we're at it, add a vector_symbols.inc for value line MCUs under
support/ld/. We need this to get the target-config.mk modifications
implied by the addition of MCU_F1_LINE. We'll fix up some other
performance-line-isms under libmaple/stm32f1 in a separate commit.

Also in libmaple/usb/:

- Move everything into a new stm32f1 directory. Due to aforementioned
  rules.mk hacks, there is no immediate need for an stm32f2
  directory (USB support doesn't exist there).

- Update the README for style and content.

Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>

1 files changed, 0 insertions, 79 deletions

diff --git a/libmaple/usb/usb_reg_map.c b/libmaple/usb/usb_reg_map.c
deleted file mode 100644
index 75562e1..0000000
--- a/libmaple/usb/usb_reg_map.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/******************************************************************************
- * The MIT License
- *
- * Copyright (c) 2011 LeafLabs, LLC.
- *
- * Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy,
- * modify, merge, publish, distribute, sublicense, and/or sell copies
- * of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *****************************************************************************/
-
-#include "usb_reg_map.h"
-
-/* TODO these could use some improvement; they're fairly
- * straightforward ports of the analogous ST code.  The PMA blit
- * routines in particular are obvious targets for performance
- * measurement and tuning. */
-
-void usb_copy_to_pma(const uint8 *buf, uint16 len, uint16 pma_offset) {
-    uint16 *dst = (uint16*)usb_pma_ptr(pma_offset);
-    uint16 n = len >> 1;
-    uint16 i;
-    for (i = 0; i < n; i++) {
-        *dst = (uint16)(*buf) | *(buf + 1) << 8;
-        buf += 2;
-        dst += 2;
-    }
-    if (len & 1) {
-        *dst = *buf;
-    }
-}
-
-void usb_copy_from_pma(uint8 *buf, uint16 len, uint16 pma_offset) {
-    uint32 *src = (uint32*)usb_pma_ptr(pma_offset);
-    uint16 *dst = (uint16*)buf;
-    uint16 n = len >> 1;
-    uint16 i;
-    for (i = 0; i < n; i++) {
-        *dst++ = *src++;
-    }
-    if (len & 1) {
-        *dst = *src & 0xFF;
-    }
-}
-
-void usb_set_ep_rx_count(uint8 ep, uint16 count) {
-    uint32 *rxc = usb_ep_rx_count_ptr(ep);
-    uint16 nblocks;
-    if (count > 62) {
-        /* use 32-byte memory block size */
-        nblocks = count >> 5;
-        if ((count & 0x1F) == 0) {
-            nblocks--;
-        }
-        *rxc = (nblocks << 10) | 0x8000;
-    } else {
-        /* use 2-byte memory block size */
-        nblocks = count >> 1;
-        if ((count & 0x1) != 0) {
-            nblocks++;
-        }
-        *rxc = nblocks << 10;
-    }
-}