diff options
| author | Marti Bolivar <mbolivar@leaflabs.com> | 2012-06-26 18:24:49 -0400 |
|---|---|---|
| committer | Marti Bolivar <mbolivar@leaflabs.com> | 2012-06-26 18:32:57 -0400 |
| commit | f005bd3a5c087e3d5559f2858a1e7898a4f92a8d (patch) | |
| tree | 0701628a68056f7b5f92d5a5af5f281f58e6a71e /libmaple/stm32f1/include | |
| parent | 761e059962e8f53f3cceef61d65bf2bf3025319a (diff) | |
| parent | c6073e4886da4606679bc3e9d770c9cff9390597 (diff) | |
| download | librambutan-f005bd3a5c087e3d5559f2858a1e7898a4f92a8d.tar.gz librambutan-f005bd3a5c087e3d5559f2858a1e7898a4f92a8d.zip | |
Merge branch 'wip-family-support'
Merge the long-lived (too long; future changes like these will need to
proceed more incrementally) development branch of libmaple, containing
experimental STM32F2 and STM32F1 value line support, into master.
This required many changes to the structure of the library. The most
important structural reorganizations occurred in:
- 954f9e5: moves public headers to include directories
- 3efa313: uses "series" instead of "family"
- c0d60e3: adds board files to the build system, to make it easier to
add new boards
- 096d86c: adds build logic for targeting different STM32 series
(e.g. STM32F1, STM32F2)
This last commit in particular (096d86c) is the basis for the
repartitioning of libmaple into portable sections, which work on all
supported MCUs, and nonportable sections, which are segregated into
separate directories and contain all series-specific code. Moving
existing STM32F1-only code into libmaple/stm32f1 and wirish/stm32f1,
along with adding equivalents under .../stm32f2 directories, was the
principal project of this branch.
Important API changes occur in several places. Existing code is still
expected to work on STM32F1 targets, but there have been many
deprecations. A detailed changelog explaining the situation needs to
be prepared.
F2 and F1 value line support is not complete; the merge is proceeding
prematurely in this respect. We've been getting more libmaple patches
from the community lately, and I'm worried that the merge conflicts
with the old tree structure will become painful to manage.
Conflicts:
Makefile
Resolved Makefile conflicts manually; this required propagating
-Xlinker usage into support/make/target-config.mk.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Diffstat (limited to 'libmaple/stm32f1/include')
| -rw-r--r-- | libmaple/stm32f1/include/series/adc.h | 254 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/dac.h | 71 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/dma.h | 565 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/exti.h | 46 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/flash.h | 149 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/gpio.h | 493 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/i2c.h | 85 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/nvic.h | 173 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/pwr.h | 52 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/rcc.h | 599 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/spi.h | 99 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/stm32.h | 212 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/timer.h | 128 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/usart.h | 76 |
14 files changed, 3002 insertions, 0 deletions
diff --git a/libmaple/stm32f1/include/series/adc.h b/libmaple/stm32f1/include/series/adc.h new file mode 100644 index 0000000..774c97c --- /dev/null +++ b/libmaple/stm32f1/include/series/adc.h @@ -0,0 +1,254 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/adc.h + * @author Marti Bolivar <mbolivar@leaflabs.com>, + * Perry Hung <perry@leaflabs.com> + * @brief STM32F1 ADC header. + */ + +#ifndef _LIBMAPLE_STM32F1_ADC_H_ +#define _LIBMAPLE_STM32F1_ADC_H_ + +#include <libmaple/bitband.h> +#include <libmaple/libmaple_types.h> +#include <libmaple/rcc.h> /* For the prescalers */ + +/* + * Devices + */ + +extern const struct adc_dev *ADC1; +extern const struct adc_dev *ADC2; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern const struct adc_dev *ADC3; +#endif + +/* + * Register map base pointers + */ + +/** ADC1 register map base pointer. */ +#define ADC1_BASE ((struct adc_reg_map*)0x40012400) +/** ADC2 register map base pointer. */ +#define ADC2_BASE ((struct adc_reg_map*)0x40012800) +/** ADC3 register map base pointer. */ +#define ADC3_BASE ((struct adc_reg_map*)0x40013C00) + +/* + * Register bit definitions + */ + +/* Control register 2 */ + +#define ADC_CR2_ADON_BIT 0 +#define ADC_CR2_CONT_BIT 1 +#define ADC_CR2_CAL_BIT 2 +#define ADC_CR2_RSTCAL_BIT 3 +#define ADC_CR2_DMA_BIT 8 +#define ADC_CR2_ALIGN_BIT 11 +#define ADC_CR2_JEXTTRIG_BIT 15 +#define ADC_CR2_EXTTRIG_BIT 20 +#define ADC_CR2_JSWSTART_BIT 21 +#define ADC_CR2_SWSTART_BIT 22 +#define ADC_CR2_TSEREFE_BIT 23 + +#define ADC_CR2_ADON (1U << ADC_CR2_ADON_BIT) +#define ADC_CR2_CONT (1U << ADC_CR2_CONT_BIT) +#define ADC_CR2_CAL (1U << ADC_CR2_CAL_BIT) +#define ADC_CR2_RSTCAL (1U << ADC_CR2_RSTCAL_BIT) +#define ADC_CR2_DMA (1U << ADC_CR2_DMA_BIT) +#define ADC_CR2_ALIGN (1U << ADC_CR2_ALIGN_BIT) +#define ADC_CR2_JEXTSEL 0x7000 +#define ADC_CR2_JEXTTRIG (1U << ADC_CR2_JEXTTRIG_BIT) +#define ADC_CR2_EXTSEL 0xE0000 +#define ADC_CR2_EXTTRIG (1U << ADC_CR2_EXTTRIG_BIT) +#define ADC_CR2_JSWSTART (1U << ADC_CR2_JSWSTART_BIT) +#define ADC_CR2_SWSTART (1U << ADC_CR2_SWSTART_BIT) +#define ADC_CR2_TSEREFE (1U << ADC_CR2_TSEREFE_BIT) + +/* + * Other types + */ + +/** + * @brief STM32F1 external event selectors for regular group + * conversion. + * + * Some external events are only available on ADCs 1 and 2, others + * only on ADC3, while others are available on all three ADCs. + * Additionally, some events are only available on high- and + * XL-density STM32F1 MCUs, as they use peripherals only available on + * those MCU densities. + * + * For ease of use, each event selector is given along with the ADCs + * it's available on, along with any other availability restrictions. + * + * @see adc_set_extsel() + */ +typedef enum adc_extsel_event { + /* TODO: Smarten this up a bit, as follows. + * + * The EXTSEL bits on F1 are a little brain-damaged in that the + * TIM8 TRGO event has different bits depending on whether you're + * using ADC1/2 or ADC3. We route around this by declaring two + * enumerators, ADC_EXT_EV_ADC12_TIM8_TRGO and + * ADC_EXT_EV_ADC3_TIM8_TRGO. + * + * The right thing to do is to provide a single + * ADC_EXT_EV_TIM8_TRGO enumerator and override adc_set_extsel on + * STM32F1 to handle this situation correctly. We can do that + * later, though, and change the per-ADC enumerator values to + * ADC_EXT_EV_TIM8_TRGO to preserve compatibility. */ + + /* ADC1 and ADC2 only: */ + ADC_EXT_EV_TIM1_CC1 = 0x00000, /**< ADC1, ADC2: Timer 1 CC1 event */ + ADC_EXT_EV_TIM1_CC2 = 0x20000, /**< ADC1, ADC2: Timer 1 CC2 event */ + ADC_EXT_EV_TIM2_CC2 = 0x60000, /**< ADC1, ADC2: Timer 2 CC2 event */ + ADC_EXT_EV_TIM3_TRGO = 0x80000, /**< ADC1, ADC2: Timer 3 TRGO event */ + ADC_EXT_EV_TIM4_CC4 = 0xA0000, /**< ADC1, ADC2: Timer 4 CC4 event */ + ADC_EXT_EV_EXTI11 = 0xC0000, /**< ADC1, ADC2: EXTI11 event */ + + /* Common: */ + ADC_EXT_EV_TIM1_CC3 = 0x40000, /**< ADC1, ADC2, ADC3: Timer 1 CC3 event */ + ADC_EXT_EV_SWSTART = 0xE0000, /**< ADC1, ADC2, ADC3: Software start */ + + /* HD only: */ + ADC_EXT_EV_TIM3_CC1 = 0x00000, /**< + * ADC3: Timer 3 CC1 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM2_CC3 = 0x20000, /**< + * ADC3: Timer 2 CC3 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM8_CC1 = 0x60000, /**< + * ADC3: Timer 8 CC1 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_ADC3_TIM8_TRGO = 0x80000, /**< + * ADC3: Timer 8 TRGO event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM5_CC1 = 0xA0000, /**< + * ADC3: Timer 5 CC1 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_ADC12_TIM8_TRGO = 0xC0000, /**< + * ADC1, ADC2: Timer 8 TRGO event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM5_CC3 = 0xC0000, /**< + * ADC3: Timer 5 CC3 event + * Availability: high- and XL-density. */ +} adc_extsel_event; + +/* We'll keep these old adc_extsel_event enumerators around for a + * while, for backwards compatibility: */ +/** Deprecated. Use ADC_EXT_EV_TIM1_CC1 instead. */ +#define ADC_ADC12_TIM1_CC1 ADC_EXT_EV_TIM1_CC1 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC2 instead. */ +#define ADC_ADC12_TIM1_CC2 ADC_EXT_EV_TIM1_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC3 instead. */ +#define ADC_ADC12_TIM1_CC3 ADC_EXT_EV_TIM1_CC3 +/** Deprecated. Use ADC_EXT_EV_TIM2_CC2 instead. */ +#define ADC_ADC12_TIM2_CC2 ADC_EXT_EV_TIM2_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM3_TRGO instead. */ +#define ADC_ADC12_TIM3_TRGO ADC_EXT_EV_TIM3_TRGO +/** Deprecated. Use ADC_EXT_EV_TIM4_CC4 instead. */ +#define ADC_ADC12_TIM4_CC4 ADC_EXT_EV_TIM4_CC4 +/** Deprecated. Use ADC_EXT_EV_EXTI11 instead. */ +#define ADC_ADC12_EXTI11 ADC_EXT_EV_EXTI11 +/** Deprecated. Use ADC_EXT_EV_ADC12_TIM8_TRGO instead. */ +#define ADC_ADC12_TIM8_TRGO ADC_EXT_EV_ADC12_TIM8_TRGO +/** Deprecated. Use ADC_EXT_EV_SWSTART instead. */ +#define ADC_ADC12_SWSTART ADC_EXT_EV_SWSTART +/** Deprecated. Use ADC_EXT_EV_TIM1_CC1 instead. */ +#define ADC_ADC3_TIM3_CC1 ADC_EXT_EV_TIM1_CC1 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC2 instead. */ +#define ADC_ADC3_TIM2_CC3 ADC_EXT_EV_TIM1_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC3 instead. */ +#define ADC_ADC3_TIM1_CC3 ADC_EXT_EV_TIM1_CC3 +/** Deprecated. Use ADC_EXT_EV_TIM2_CC2 instead. */ +#define ADC_ADC3_TIM8_CC1 ADC_EXT_EV_TIM2_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM3_TRGO instead. */ +#define ADC_ADC3_TIM8_TRGO ADC_EXT_EV_TIM3_TRGO +/** Deprecated. Use ADC_EXT_EV_TIM4_CC4 instead. */ +#define ADC_ADC3_TIM5_CC1 ADC_EXT_EV_TIM4_CC4 +/** Deprecated. Use ADC_EXT_EV_EXTI11 instead. */ +#define ADC_ADC3_TIM5_CC3 ADC_EXT_EV_EXTI11 +/** Deprecated. Use ADC_EXT_EV_TIM8_TRGO instead. */ +#define ADC_ADC3_SWSTART ADC_EXT_EV_TIM8_TRGO +/** Deprecated. Use ADC_EXT_EV_SWSTART instead. */ +#define ADC_SWSTART ADC_EXT_EV_SWSTART + +/** + * @brief STM32F1 sample times, in ADC clock cycles. + * + * These control the amount of time spent sampling the input voltage. + * + * IMPORTANT: maximum external impedance must be below 0.4kOhms for + * 1.5 cycle sampling time. At 55.5 cycles/sample, the external input + * impedance must be at most 50kOhms. See your device's datasheet for + * more information. + */ +typedef enum adc_smp_rate { + ADC_SMPR_1_5, /**< 1.5 ADC cycles */ + ADC_SMPR_7_5, /**< 7.5 ADC cycles */ + ADC_SMPR_13_5, /**< 13.5 ADC cycles */ + ADC_SMPR_28_5, /**< 28.5 ADC cycles */ + ADC_SMPR_41_5, /**< 41.5 ADC cycles */ + ADC_SMPR_55_5, /**< 55.5 ADC cycles */ + ADC_SMPR_71_5, /**< 71.5 ADC cycles */ + ADC_SMPR_239_5, /**< 239.5 ADC cycles */ +} adc_smp_rate; + +/** + * @brief STM32F1 ADC prescalers, as divisors of PCLK2. + */ +typedef enum adc_prescaler { + ADC_PRE_PCLK2_DIV_2 = RCC_ADCPRE_PCLK_DIV_2, /** PCLK2 divided by 2 */ + ADC_PRE_PCLK2_DIV_4 = RCC_ADCPRE_PCLK_DIV_4, /** PCLK2 divided by 4 */ + ADC_PRE_PCLK2_DIV_6 = RCC_ADCPRE_PCLK_DIV_6, /** PCLK2 divided by 6 */ + ADC_PRE_PCLK2_DIV_8 = RCC_ADCPRE_PCLK_DIV_8, /** PCLK2 divided by 8 */ +} adc_prescaler; + +/* + * Routines + */ + +void adc_calibrate(const adc_dev *dev); + +/** + * @brief Set external trigger conversion mode event for regular channels + * + * Availability: STM32F1. + * + * @param dev ADC device + * @param enable If 1, conversion on external events is enabled; if 0, + * disabled. + */ +static inline void adc_set_exttrig(const adc_dev *dev, uint8 enable) { + *bb_perip(&dev->regs->CR2, ADC_CR2_EXTTRIG_BIT) = !!enable; +} + +#endif diff --git a/libmaple/stm32f1/include/series/dac.h b/libmaple/stm32f1/include/series/dac.h new file mode 100644 index 0000000..c0d026b --- /dev/null +++ b/libmaple/stm32f1/include/series/dac.h @@ -0,0 +1,71 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/dac.h + * @brief STM32F1 DAC support + */ + +#ifndef _LIBMAPLE_STM32F1_DAC_H_ +#define _LIBMAPLE_STM32F1_DAC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/** STM32F1 DAC register map type. */ +typedef struct dac_reg_map { + __io uint32 CR; /**< Control register */ + __io uint32 SWTRIGR; /**< Software trigger register */ + __io uint32 DHR12R1; /**< Channel 1 12-bit right-aligned data + holding register */ + __io uint32 DHR12L1; /**< Channel 1 12-bit left-aligned data + holding register */ + __io uint32 DHR8R1; /**< Channel 1 8-bit left-aligned data + holding register */ + __io uint32 DHR12R2; /**< Channel 2 12-bit right-aligned data + holding register */ + __io uint32 DHR12L2; /**< Channel 2 12-bit left-aligned data + holding register */ + __io uint32 DHR8R2; /**< Channel 2 8-bit left-aligned data + holding register */ + __io uint32 DHR12RD; /**< Dual DAC 12-bit right-aligned data + holding register */ + __io uint32 DHR12LD; /**< Dual DAC 12-bit left-aligned data + holding register */ + __io uint32 DHR8RD; /**< Dual DAC 8-bit right-aligned data holding + register */ + __io uint32 DOR1; /**< Channel 1 data output register */ + __io uint32 DOR2; /**< Channel 2 data output register */ +} dac_reg_map; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/dma.h b/libmaple/stm32f1/include/series/dma.h new file mode 100644 index 0000000..3b19e2b --- /dev/null +++ b/libmaple/stm32f1/include/series/dma.h @@ -0,0 +1,565 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Michael Hope. + * Copyright (c) 2012 LeafLabs, LLC + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/dma.h + * @author Marti Bolivar <mbolivar@leaflabs.com>; + * Original implementation by Michael Hope + * @brief STM32F1 DMA series header. + */ + +/* + * See /notes/dma-stm32f1.txt for more information. + */ + +#ifndef _LIBMAPLE_STM32F1_DMA_H_ +#define _LIBMAPLE_STM32F1_DMA_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> +#include <libmaple/dma_common.h> + +/* + * Register maps and base pointers + */ + +/** + * @brief STM32F1 DMA register map type. + * + * Note that DMA controller 2 (register map base pointer DMA2_BASE) + * only supports channels 1--5. + */ +typedef struct dma_reg_map { + __io uint32 ISR; /**< Interrupt status register */ + __io uint32 IFCR; /**< Interrupt flag clear register */ + __io uint32 CCR1; /**< Channel 1 configuration register */ + __io uint32 CNDTR1; /**< Channel 1 number of data register */ + __io uint32 CPAR1; /**< Channel 1 peripheral address register */ + __io uint32 CMAR1; /**< Channel 1 memory address register */ + const uint32 RESERVED1; /**< Reserved. */ + __io uint32 CCR2; /**< Channel 2 configuration register */ + __io uint32 CNDTR2; /**< Channel 2 number of data register */ + __io uint32 CPAR2; /**< Channel 2 peripheral address register */ + __io uint32 CMAR2; /**< Channel 2 memory address register */ + const uint32 RESERVED2; /**< Reserved. */ + __io uint32 CCR3; /**< Channel 3 configuration register */ + __io uint32 CNDTR3; /**< Channel 3 number of data register */ + __io uint32 CPAR3; /**< Channel 3 peripheral address register */ + __io uint32 CMAR3; /**< Channel 3 memory address register */ + const uint32 RESERVED3; /**< Reserved. */ + __io uint32 CCR4; /**< Channel 4 configuration register */ + __io uint32 CNDTR4; /**< Channel 4 number of data register */ + __io uint32 CPAR4; /**< Channel 4 peripheral address register */ + __io uint32 CMAR4; /**< Channel 4 memory address register */ + const uint32 RESERVED4; /**< Reserved. */ + __io uint32 CCR5; /**< Channel 5 configuration register */ + __io uint32 CNDTR5; /**< Channel 5 number of data register */ + __io uint32 CPAR5; /**< Channel 5 peripheral address register */ + __io uint32 CMAR5; /**< Channel 5 memory address register */ + const uint32 RESERVED5; /**< Reserved. */ + __io uint32 CCR6; /**< Channel 6 configuration register */ + __io uint32 CNDTR6; /**< Channel 6 number of data register */ + __io uint32 CPAR6; /**< Channel 6 peripheral address register */ + __io uint32 CMAR6; /**< Channel 6 memory address register */ + const uint32 RESERVED6; /**< Reserved. */ + __io uint32 CCR7; /**< Channel 7 configuration register */ + __io uint32 CNDTR7; /**< Channel 7 number of data register */ + __io uint32 CPAR7; /**< Channel 7 peripheral address register */ + __io uint32 CMAR7; /**< Channel 7 memory address register */ + const uint32 RESERVED7; /**< Reserved. */ +} dma_reg_map; + +/** DMA controller 1 register map base pointer */ +#define DMA1_BASE ((struct dma_reg_map*)0x40020000) +/** DMA controller 2 register map base pointer */ +#define DMA2_BASE ((struct dma_reg_map*)0x40020400) + +/** + * @brief STM32F1 DMA channel (i.e. tube) register map type. + * Provides access to an individual channel's registers. + * @see dma_tube_regs() + */ +typedef struct dma_tube_reg_map { + __io uint32 CCR; /**< Channel configuration register */ + __io uint32 CNDTR; /**< Channel number of data register */ + __io uint32 CPAR; /**< Channel peripheral address register */ + __io uint32 CMAR; /**< Channel memory address register */ +} dma_tube_reg_map; + +/** DMA1 channel 1 register map base pointer */ +#define DMA1CH1_BASE ((struct dma_tube_reg_map*)0x40020008) +/** DMA1 channel 2 register map base pointer */ +#define DMA1CH2_BASE ((struct dma_tube_reg_map*)0x4002001C) +/** DMA1 channel 3 register map base pointer */ +#define DMA1CH3_BASE ((struct dma_tube_reg_map*)0x40020030) +/** DMA1 channel 4 register map base pointer */ +#define DMA1CH4_BASE ((struct dma_tube_reg_map*)0x40020044) +/** DMA1 channel 5 register map base pointer */ +#define DMA1CH5_BASE ((struct dma_tube_reg_map*)0x40020058) +/** DMA1 channel 6 register map base pointer */ +#define DMA1CH6_BASE ((struct dma_tube_reg_map*)0x4002006C) +/** DMA1 channel 7 register map base pointer */ +#define DMA1CH7_BASE ((struct dma_tube_reg_map*)0x40020080) + +/** DMA2 channel 1 register map base pointer */ +#define DMA2CH1_BASE ((struct dma_tube_reg_map*)0x40020408) +/** DMA2 channel 2 register map base pointer */ +#define DMA2CH2_BASE ((struct dma_tube_reg_map*)0x4002041C) +/** DMA2 channel 3 register map base pointer */ +#define DMA2CH3_BASE ((struct dma_tube_reg_map*)0x40020430) +/** DMA2 channel 4 register map base pointer */ +#define DMA2CH4_BASE ((struct dma_tube_reg_map*)0x40020444) +/** DMA2 channel 5 register map base pointer */ +#define DMA2CH5_BASE ((struct dma_tube_reg_map*)0x40020458) + +/* + * Register bit definitions + */ + +/* Interrupt status register */ + +#define DMA_ISR_TEIF7_BIT 27 +#define DMA_ISR_HTIF7_BIT 26 +#define DMA_ISR_TCIF7_BIT 25 +#define DMA_ISR_GIF7_BIT 24 +#define DMA_ISR_TEIF6_BIT 23 +#define DMA_ISR_HTIF6_BIT 22 +#define DMA_ISR_TCIF6_BIT 21 +#define DMA_ISR_GIF6_BIT 20 +#define DMA_ISR_TEIF5_BIT 19 +#define DMA_ISR_HTIF5_BIT 18 +#define DMA_ISR_TCIF5_BIT 17 +#define DMA_ISR_GIF5_BIT 16 +#define DMA_ISR_TEIF4_BIT 15 +#define DMA_ISR_HTIF4_BIT 14 +#define DMA_ISR_TCIF4_BIT 13 +#define DMA_ISR_GIF4_BIT 12 +#define DMA_ISR_TEIF3_BIT 11 +#define DMA_ISR_HTIF3_BIT 10 +#define DMA_ISR_TCIF3_BIT 9 +#define DMA_ISR_GIF3_BIT 8 +#define DMA_ISR_TEIF2_BIT 7 +#define DMA_ISR_HTIF2_BIT 6 +#define DMA_ISR_TCIF2_BIT 5 +#define DMA_ISR_GIF2_BIT 4 +#define DMA_ISR_TEIF1_BIT 3 +#define DMA_ISR_HTIF1_BIT 2 +#define DMA_ISR_TCIF1_BIT 1 +#define DMA_ISR_GIF1_BIT 0 + +#define DMA_ISR_TEIF7 (1U << DMA_ISR_TEIF7_BIT) +#define DMA_ISR_HTIF7 (1U << DMA_ISR_HTIF7_BIT) +#define DMA_ISR_TCIF7 (1U << DMA_ISR_TCIF7_BIT) +#define DMA_ISR_GIF7 (1U << DMA_ISR_GIF7_BIT) +#define DMA_ISR_TEIF6 (1U << DMA_ISR_TEIF6_BIT) +#define DMA_ISR_HTIF6 (1U << DMA_ISR_HTIF6_BIT) +#define DMA_ISR_TCIF6 (1U << DMA_ISR_TCIF6_BIT) +#define DMA_ISR_GIF6 (1U << DMA_ISR_GIF6_BIT) +#define DMA_ISR_TEIF5 (1U << DMA_ISR_TEIF5_BIT) +#define DMA_ISR_HTIF5 (1U << DMA_ISR_HTIF5_BIT) +#define DMA_ISR_TCIF5 (1U << DMA_ISR_TCIF5_BIT) +#define DMA_ISR_GIF5 (1U << DMA_ISR_GIF5_BIT) +#define DMA_ISR_TEIF4 (1U << DMA_ISR_TEIF4_BIT) +#define DMA_ISR_HTIF4 (1U << DMA_ISR_HTIF4_BIT) +#define DMA_ISR_TCIF4 (1U << DMA_ISR_TCIF4_BIT) +#define DMA_ISR_GIF4 (1U << DMA_ISR_GIF4_BIT) +#define DMA_ISR_TEIF3 (1U << DMA_ISR_TEIF3_BIT) +#define DMA_ISR_HTIF3 (1U << DMA_ISR_HTIF3_BIT) +#define DMA_ISR_TCIF3 (1U << DMA_ISR_TCIF3_BIT) +#define DMA_ISR_GIF3 (1U << DMA_ISR_GIF3_BIT) +#define DMA_ISR_TEIF2 (1U << DMA_ISR_TEIF2_BIT) +#define DMA_ISR_HTIF2 (1U << DMA_ISR_HTIF2_BIT) +#define DMA_ISR_TCIF2 (1U << DMA_ISR_TCIF2_BIT) +#define DMA_ISR_GIF2 (1U << DMA_ISR_GIF2_BIT) +#define DMA_ISR_TEIF1 (1U << DMA_ISR_TEIF1_BIT) +#define DMA_ISR_HTIF1 (1U << DMA_ISR_HTIF1_BIT) +#define DMA_ISR_TCIF1 (1U << DMA_ISR_TCIF1_BIT) +#define DMA_ISR_GIF1 (1U << DMA_ISR_GIF1_BIT) + +/* Interrupt flag clear register */ + +#define DMA_IFCR_CTEIF7_BIT 27 +#define DMA_IFCR_CHTIF7_BIT 26 +#define DMA_IFCR_CTCIF7_BIT 25 +#define DMA_IFCR_CGIF7_BIT 24 +#define DMA_IFCR_CTEIF6_BIT 23 +#define DMA_IFCR_CHTIF6_BIT 22 +#define DMA_IFCR_CTCIF6_BIT 21 +#define DMA_IFCR_CGIF6_BIT 20 +#define DMA_IFCR_CTEIF5_BIT 19 +#define DMA_IFCR_CHTIF5_BIT 18 +#define DMA_IFCR_CTCIF5_BIT 17 +#define DMA_IFCR_CGIF5_BIT 16 +#define DMA_IFCR_CTEIF4_BIT 15 +#define DMA_IFCR_CHTIF4_BIT 14 +#define DMA_IFCR_CTCIF4_BIT 13 +#define DMA_IFCR_CGIF4_BIT 12 +#define DMA_IFCR_CTEIF3_BIT 11 +#define DMA_IFCR_CHTIF3_BIT 10 +#define DMA_IFCR_CTCIF3_BIT 9 +#define DMA_IFCR_CGIF3_BIT 8 +#define DMA_IFCR_CTEIF2_BIT 7 +#define DMA_IFCR_CHTIF2_BIT 6 +#define DMA_IFCR_CTCIF2_BIT 5 +#define DMA_IFCR_CGIF2_BIT 4 +#define DMA_IFCR_CTEIF1_BIT 3 +#define DMA_IFCR_CHTIF1_BIT 2 +#define DMA_IFCR_CTCIF1_BIT 1 +#define DMA_IFCR_CGIF1_BIT 0 + +#define DMA_IFCR_CTEIF7 (1U << DMA_IFCR_CTEIF7_BIT) +#define DMA_IFCR_CHTIF7 (1U << DMA_IFCR_CHTIF7_BIT) +#define DMA_IFCR_CTCIF7 (1U << DMA_IFCR_CTCIF7_BIT) +#define DMA_IFCR_CGIF7 (1U << DMA_IFCR_CGIF7_BIT) +#define DMA_IFCR_CTEIF6 (1U << DMA_IFCR_CTEIF6_BIT) +#define DMA_IFCR_CHTIF6 (1U << DMA_IFCR_CHTIF6_BIT) +#define DMA_IFCR_CTCIF6 (1U << DMA_IFCR_CTCIF6_BIT) +#define DMA_IFCR_CGIF6 (1U << DMA_IFCR_CGIF6_BIT) +#define DMA_IFCR_CTEIF5 (1U << DMA_IFCR_CTEIF5_BIT) +#define DMA_IFCR_CHTIF5 (1U << DMA_IFCR_CHTIF5_BIT) +#define DMA_IFCR_CTCIF5 (1U << DMA_IFCR_CTCIF5_BIT) +#define DMA_IFCR_CGIF5 (1U << DMA_IFCR_CGIF5_BIT) +#define DMA_IFCR_CTEIF4 (1U << DMA_IFCR_CTEIF4_BIT) +#define DMA_IFCR_CHTIF4 (1U << DMA_IFCR_CHTIF4_BIT) +#define DMA_IFCR_CTCIF4 (1U << DMA_IFCR_CTCIF4_BIT) +#define DMA_IFCR_CGIF4 (1U << DMA_IFCR_CGIF4_BIT) +#define DMA_IFCR_CTEIF3 (1U << DMA_IFCR_CTEIF3_BIT) +#define DMA_IFCR_CHTIF3 (1U << DMA_IFCR_CHTIF3_BIT) +#define DMA_IFCR_CTCIF3 (1U << DMA_IFCR_CTCIF3_BIT) +#define DMA_IFCR_CGIF3 (1U << DMA_IFCR_CGIF3_BIT) +#define DMA_IFCR_CTEIF2 (1U << DMA_IFCR_CTEIF2_BIT) +#define DMA_IFCR_CHTIF2 (1U << DMA_IFCR_CHTIF2_BIT) +#define DMA_IFCR_CTCIF2 (1U << DMA_IFCR_CTCIF2_BIT) +#define DMA_IFCR_CGIF2 (1U << DMA_IFCR_CGIF2_BIT) +#define DMA_IFCR_CTEIF1 (1U << DMA_IFCR_CTEIF1_BIT) +#define DMA_IFCR_CHTIF1 (1U << DMA_IFCR_CHTIF1_BIT) +#define DMA_IFCR_CTCIF1 (1U << DMA_IFCR_CTCIF1_BIT) +#define DMA_IFCR_CGIF1 (1U << DMA_IFCR_CGIF1_BIT) + +/* Channel configuration register */ + +#define DMA_CCR_MEM2MEM_BIT 14 +#define DMA_CCR_MINC_BIT 7 +#define DMA_CCR_PINC_BIT 6 +#define DMA_CCR_CIRC_BIT 5 +#define DMA_CCR_DIR_BIT 4 +#define DMA_CCR_TEIE_BIT 3 +#define DMA_CCR_HTIE_BIT 2 +#define DMA_CCR_TCIE_BIT 1 +#define DMA_CCR_EN_BIT 0 + +#define DMA_CCR_MEM2MEM (1U << DMA_CCR_MEM2MEM_BIT) +#define DMA_CCR_PL (0x3 << 12) +#define DMA_CCR_PL_LOW (0x0 << 12) +#define DMA_CCR_PL_MEDIUM (0x1 << 12) +#define DMA_CCR_PL_HIGH (0x2 << 12) +#define DMA_CCR_PL_VERY_HIGH (0x3 << 12) +#define DMA_CCR_MSIZE (0x3 << 10) +#define DMA_CCR_MSIZE_8BITS (0x0 << 10) +#define DMA_CCR_MSIZE_16BITS (0x1 << 10) +#define DMA_CCR_MSIZE_32BITS (0x2 << 10) +#define DMA_CCR_PSIZE (0x3 << 8) +#define DMA_CCR_PSIZE_8BITS (0x0 << 8) +#define DMA_CCR_PSIZE_16BITS (0x1 << 8) +#define DMA_CCR_PSIZE_32BITS (0x2 << 8) +#define DMA_CCR_MINC (1U << DMA_CCR_MINC_BIT) +#define DMA_CCR_PINC (1U << DMA_CCR_PINC_BIT) +#define DMA_CCR_CIRC (1U << DMA_CCR_CIRC_BIT) +#define DMA_CCR_DIR (1U << DMA_CCR_DIR_BIT) +#define DMA_CCR_DIR_FROM_PER (0U << DMA_CCR_DIR_BIT) +#define DMA_CCR_DIR_FROM_MEM (1U << DMA_CCR_DIR_BIT) +#define DMA_CCR_TEIE (1U << DMA_CCR_TEIE_BIT) +#define DMA_CCR_HTIE (1U << DMA_CCR_HTIE_BIT) +#define DMA_CCR_TCIE (1U << DMA_CCR_TCIE_BIT) +#define DMA_CCR_EN (1U << DMA_CCR_EN_BIT) + +/* + * Devices + */ + +extern dma_dev *DMA1; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern dma_dev *DMA2; +#endif + +/* + * Other types needed by, or useful for, <libmaple/dma.h>. + */ + +/** + * @brief STM32F1 dma_tube. + * On STM32F1, DMA tubes are just channels. + */ +#define dma_tube dma_channel + +/** + * @brief On STM32F1, dma_channel_reg_map is an alias for dma_tube_reg_map. + * This is for backwards compatibility. */ +#define dma_channel_reg_map dma_tube_reg_map + +/** + * @brief STM32F1 configuration flags for dma_tube_config + * @see struct dma_tube_config + */ +typedef enum dma_cfg_flags { + /** + * Source address increment mode + * + * If this flag is set, the source address is incremented (by the + * source size) after each DMA transfer. + */ + DMA_CFG_SRC_INC = 1U << 31, + + /** + * Destination address increment mode + * + * If this flag is set, the destination address is incremented (by + * the destination size) after each DMA transfer. + */ + DMA_CFG_DST_INC = 1U << 30, + + /** + * Circular mode + * + * This mode is not available for memory-to-memory transfers. + */ + DMA_CFG_CIRC = DMA_CCR_CIRC, + + /** Transfer complete interrupt enable */ + DMA_CFG_CMPLT_IE = DMA_CCR_TCIE, + /** Transfer half-complete interrupt enable */ + DMA_CFG_HALF_CMPLT_IE = DMA_CCR_HTIE, + /** Transfer error interrupt enable */ + DMA_CFG_ERR_IE = DMA_CCR_TEIE, +} dma_cfg_flags; + +/** + * @brief STM32F1 DMA request sources. + * + * IMPORTANT: + * + * 1. On STM32F1, each dma_request_src can only be used by a + * particular tube on a particular DMA controller. For example, + * DMA_REQ_SRC_ADC1 belongs to DMA1, tube 1. DMA2 cannot serve + * requests from ADC1, nor can DMA1 tube 2, etc. If you try to use a + * request source with the wrong DMA controller or tube on STM32F1, + * dma_tube_cfg() will fail. + * + * 2. In general, a DMA tube can only serve a single request source at + * a time, and on STM32F1, Terrible Super-Bad Things will happen if + * two request sources are active for a single tube. + * + * To make all this easier to sort out, these dma_request_src + * enumerators are grouped by DMA controller and tube. + * + * @see struct dma_tube_config + * @see dma_tube_cfg() + */ +typedef enum dma_request_src { + /* Each request source encodes the DMA controller and channel it + * belongs to, for error checking in dma_tube_cfg(). */ + + /* DMA1 request sources */ + + /**@{*/ + /** (DMA1, tube 1) */ + DMA_REQ_SRC_ADC1 = (RCC_DMA1 << 3) | 1, + DMA_REQ_SRC_TIM2_CH3 = (RCC_DMA1 << 3) | 1, + DMA_REQ_SRC_TIM4_CH1 = (RCC_DMA1 << 3) | 1, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 2)*/ + DMA_REQ_SRC_SPI1_RX = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_USART3_TX = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_TIM1_CH1 = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_TIM2_UP = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_TIM3_CH3 = (RCC_DMA1 << 3) | 2, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 3)*/ + DMA_REQ_SRC_SPI1_TX = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_USART3_RX = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_TIM1_CH2 = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_TIM3_CH4 = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_TIM3_UP = (RCC_DMA1 << 3) | 3, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 4)*/ + DMA_REQ_SRC_SPI2_RX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_I2S2_RX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_USART1_TX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_I2C2_TX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM1_CH4 = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM1_TRIG = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM1_COM = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM4_CH2 = (RCC_DMA1 << 3) | 4, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 5)*/ + DMA_REQ_SRC_SPI2_TX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_I2S2_TX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_USART1_RX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_I2C2_RX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_TIM1_UP = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_TIM2_CH1 = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_TIM4_CH3 = (RCC_DMA1 << 3) | 5, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 6)*/ + DMA_REQ_SRC_USART2_RX = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_I2C1_TX = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_TIM1_CH3 = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_TIM3_CH1 = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_TIM3_TRIG = (RCC_DMA1 << 3) | 6, + /**@}*/ + + /**@{*/ + /* Tube 7 */ + DMA_REQ_SRC_USART2_TX = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_I2C1_RX = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_TIM2_CH2 = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_TIM2_CH4 = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_TIM4_UP = (RCC_DMA1 << 3) | 7, + /**@}*/ + + /* DMA2 request sources */ + + /**@{*/ + /** (DMA2, tube 1)*/ + DMA_REQ_SRC_SPI3_RX = (RCC_DMA2 << 3) | 1, + DMA_REQ_SRC_I2S3_RX = (RCC_DMA2 << 3) | 1, + DMA_REQ_SRC_TIM5_CH4 = (RCC_DMA2 << 3) | 1, + DMA_REQ_SRC_TIM5_TRIG = (RCC_DMA2 << 3) | 1, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 2)*/ + DMA_REQ_SRC_SPI3_TX = (RCC_DMA2 << 3) | 2, + DMA_REQ_SRC_I2S3_TX = (RCC_DMA2 << 3) | 2, + DMA_REQ_SRC_TIM5_CH3 = (RCC_DMA2 << 3) | 2, + DMA_REQ_SRC_TIM5_UP = (RCC_DMA2 << 3) | 2, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 3)*/ + DMA_REQ_SRC_UART4_RX = (RCC_DMA2 << 3) | 3, + DMA_REQ_SRC_TIM6_UP = (RCC_DMA2 << 3) | 3, + DMA_REQ_SRC_DAC_CH1 = (RCC_DMA2 << 3) | 3, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 4)*/ + DMA_REQ_SRC_SDIO = (RCC_DMA2 << 3) | 4, + DMA_REQ_SRC_TIM5_CH2 = (RCC_DMA2 << 3) | 4, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 5)*/ + DMA_REQ_SRC_ADC3 = (RCC_DMA2 << 3) | 5, + DMA_REQ_SRC_UART4_TX = (RCC_DMA2 << 3) | 5, + DMA_REQ_SRC_TIM5_CH1 = (RCC_DMA2 << 3) | 5, + /**@}*/ +} dma_request_src; + +/* + * Convenience routines. + */ + +/** + * @brief On STM32F1, dma_is_channel_enabled() is an alias for + * dma_is_enabled(). + * This is for backwards compatibility. + */ +#define dma_is_channel_enabled dma_is_enabled + +#define DMA_CHANNEL_NREGS 5 /* accounts for reserved word */ +static inline dma_tube_reg_map* dma_tube_regs(dma_dev *dev, dma_tube tube) { + __io uint32 *ccr1 = &dev->regs->CCR1; + return (dma_channel_reg_map*)(ccr1 + DMA_CHANNEL_NREGS * (tube - 1)); +} + +/** + * @brief On STM32F1, dma_channel_regs() is an alias for dma_tube_regs(). + * This is for backwards compatibility. */ +#define dma_channel_regs(dev, ch) dma_tube_regs(dev, ch) + +static inline uint8 dma_is_enabled(dma_dev *dev, dma_tube tube) { + return (uint8)(dma_tube_regs(dev, tube)->CCR & DMA_CCR_EN); +} + +static inline uint8 dma_get_isr_bits(dma_dev *dev, dma_tube tube) { + uint8 shift = (tube - 1) * 4; + return (dev->regs->ISR >> shift) & 0xF; +} + +static inline void dma_clear_isr_bits(dma_dev *dev, dma_tube tube) { + dev->regs->IFCR = (1U << (4 * (tube - 1))); +} + +/** + * @brief Deprecated + * STM32F1 mode flags for dma_setup_xfer(). Use dma_tube_cfg() instead. + * @see dma_tube_cfg() + */ +typedef enum dma_mode_flags { + DMA_MEM_2_MEM = 1 << 14, /**< Memory to memory mode */ + DMA_MINC_MODE = 1 << 7, /**< Auto-increment memory address */ + DMA_PINC_MODE = 1 << 6, /**< Auto-increment peripheral address */ + DMA_CIRC_MODE = 1 << 5, /**< Circular mode */ + DMA_FROM_MEM = 1 << 4, /**< Read from memory to peripheral */ + DMA_TRNS_ERR = 1 << 3, /**< Interrupt on transfer error */ + DMA_HALF_TRNS = 1 << 2, /**< Interrupt on half-transfer */ + DMA_TRNS_CMPLT = 1 << 1 /**< Interrupt on transfer completion */ +} dma_mode_flags; + +/* Keep this around for backwards compatibility, but it's deprecated. + * New code should use dma_tube_cfg() instead. + * + * (It's not possible to fully configure a DMA stream on F2 with just + * this information, so this interface is too tied to the F1.) */ +__deprecated +void dma_setup_transfer(dma_dev *dev, + dma_channel channel, + __io void *peripheral_address, + dma_xfer_size peripheral_size, + __io void *memory_address, + dma_xfer_size memory_size, + uint32 mode); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/exti.h b/libmaple/stm32f1/include/series/exti.h new file mode 100644 index 0000000..1ece664 --- /dev/null +++ b/libmaple/stm32f1/include/series/exti.h @@ -0,0 +1,46 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/exti.h + * @brief STM32F1 external interrupts + */ + +#ifndef _LIBMAPLE_STM32F1_EXTI_H_ +#define _LIBMAPLE_STM32F1_EXTI_H_ + +#ifdef __cpluspus +extern "C" { +#endif + +struct exti_reg_map; +#define EXTI_BASE ((struct exti_reg_map*)0x40010400) + +#ifdef __cpluspus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/flash.h b/libmaple/stm32f1/include/series/flash.h new file mode 100644 index 0000000..24efb0b --- /dev/null +++ b/libmaple/stm32f1/include/series/flash.h @@ -0,0 +1,149 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/flash.h + * @brief STM32F1 Flash header. + * + * Provides register map, base pointer, and register bit definitions + * for the Flash controller on the STM32F1 line, along with + * series-specific configuration values. + */ + +#ifndef _LIBMAPLE_STM32F1_FLASH_H_ +#define _LIBMAPLE_STM32F1_FLASH_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * Register map + */ + +/** @brief STM32F1 Flash register map type */ +typedef struct flash_reg_map { + __io uint32 ACR; /**< Access control register */ + __io uint32 KEYR; /**< Key register */ + __io uint32 OPTKEYR; /**< OPTKEY register */ + __io uint32 SR; /**< Status register */ + __io uint32 CR; /**< Control register */ + __io uint32 AR; /**< Address register */ + __io uint32 OBR; /**< Option byte register */ + __io uint32 WRPR; /**< Write protection register */ +} flash_reg_map; + +#define FLASH_BASE ((struct flash_reg_map*)0x40022000) + +/* + * Register bit definitions + */ + +/* Access control register */ + +#define FLASH_ACR_PRFTBS_BIT 5 +#define FLASH_ACR_PRFTBE_BIT 4 +#define FLASH_ACR_HLFCYA_BIT 3 + +#define FLASH_ACR_PRFTBS (1U << FLASH_ACR_PRFTBS_BIT) +#define FLASH_ACR_PRFTBE (1U << FLASH_ACR_PRFTBE_BIT) +#define FLASH_ACR_HLFCYA (1U << FLASH_ACR_HLFCYA_BIT) +#define FLASH_ACR_LATENCY 0x7 + +/* Status register */ + +#define FLASH_SR_EOP_BIT 5 +#define FLASH_SR_WRPRTERR_BIT 4 +#define FLASH_SR_PGERR_BIT 2 +#define FLASH_SR_BSY_BIT 0 + +#define FLASH_SR_EOP (1U << FLASH_SR_EOP_BIT) +#define FLASH_SR_WRPRTERR (1U << FLASH_SR_WRPRTERR_BIT) +#define FLASH_SR_PGERR (1U << FLASH_SR_PGERR_BIT) +#define FLASH_SR_BSY (1U << FLASH_SR_BSY_BIT) + +/* Control register */ + +#define FLASH_CR_EOPIE_BIT 12 +#define FLASH_CR_ERRIE_BIT 10 +#define FLASH_CR_OPTWRE_BIT 9 +#define FLASH_CR_LOCK_BIT 7 +#define FLASH_CR_STRT_BIT 6 +#define FLASH_CR_OPTER_BIT 5 +#define FLASH_CR_OPTPG_BIT 4 +#define FLASH_CR_MER_BIT 2 +#define FLASH_CR_PER_BIT 1 +#define FLASH_CR_PG_BIT 0 + +#define FLASH_CR_EOPIE (1U << FLASH_CR_EOPIE_BIT) +#define FLASH_CR_ERRIE (1U << FLASH_CR_ERRIE_BIT) +#define FLASH_CR_OPTWRE (1U << FLASH_CR_OPTWRE_BIT) +#define FLASH_CR_LOCK (1U << FLASH_CR_LOCK_BIT) +#define FLASH_CR_STRT (1U << FLASH_CR_STRT_BIT) +#define FLASH_CR_OPTER (1U << FLASH_CR_OPTER_BIT) +#define FLASH_CR_OPTPG (1U << FLASH_CR_OPTPG_BIT) +#define FLASH_CR_MER (1U << FLASH_CR_MER_BIT) +#define FLASH_CR_PER (1U << FLASH_CR_PER_BIT) +#define FLASH_CR_PG (1U << FLASH_CR_PG_BIT) + +/* Option byte register */ + +#define FLASH_OBR_nRST_STDBY_BIT 4 +#define FLASH_OBR_nRST_STOP_BIT 3 +#define FLASH_OBR_WDG_SW_BIT 2 +#define FLASH_OBR_RDPRT_BIT 1 +#define FLASH_OBR_OPTERR_BIT 0 + +#define FLASH_OBR_DATA1 (0xFF << 18) +#define FLASH_OBR_DATA0 (0xFF << 10) +#define FLASH_OBR_USER 0x3FF +#define FLASH_OBR_nRST_STDBY (1U << FLASH_OBR_nRST_STDBY_BIT) +#define FLASH_OBR_nRST_STOP (1U << FLASH_OBR_nRST_STOP_BIT) +#define FLASH_OBR_WDG_SW (1U << FLASH_OBR_WDG_SW_BIT) +#define FLASH_OBR_RDPRT (1U << FLASH_OBR_RDPRT_BIT) +#define FLASH_OBR_OPTERR (1U << FLASH_OBR_OPTERR_BIT) + +/* + * Series-specific configuration values. + */ + +#define FLASH_SAFE_WAIT_STATES FLASH_WAIT_STATE_2 + +/* Flash memory features available via ACR */ +enum { + FLASH_PREFETCH = 0x10, + FLASH_HALF_CYCLE = 0x8, + FLASH_ICACHE = 0x0, /* Not available on STM32F1 */ + FLASH_DCACHE = 0x0, /* Not available on STM32F1 */ +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/gpio.h b/libmaple/stm32f1/include/series/gpio.h new file mode 100644 index 0000000..aecf911 --- /dev/null +++ b/libmaple/stm32f1/include/series/gpio.h @@ -0,0 +1,493 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011, 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/gpio.h + * @brief STM32F1 GPIO and AFIO support. + * General purpose I/O (GPIO) and Alternate Function I/O (AFIO). + */ + +#ifndef _LIBMAPLE_STM32F1_GPIO_H_ +#define _LIBMAPLE_STM32F1_GPIO_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/stm32.h> +#include <libmaple/libmaple_types.h> +#include <libmaple/exti.h> + +/* + * GPIO register maps and devices + */ + +/** GPIO register map type */ +typedef struct gpio_reg_map { + __io uint32 CRL; /**< Port configuration register low */ + __io uint32 CRH; /**< Port configuration register high */ + __io uint32 IDR; /**< Port input data register */ + __io uint32 ODR; /**< Port output data register */ + __io uint32 BSRR; /**< Port bit set/reset register */ + __io uint32 BRR; /**< Port bit reset register */ + __io uint32 LCKR; /**< Port configuration lock register */ +} gpio_reg_map; + +struct gpio_dev; +extern struct gpio_dev gpioa; +extern struct gpio_dev* const GPIOA; +extern struct gpio_dev gpiob; +extern struct gpio_dev* const GPIOB; +extern struct gpio_dev gpioc; +extern struct gpio_dev* const GPIOC; +extern struct gpio_dev gpiod; +extern struct gpio_dev* const GPIOD; +#ifdef STM32_HIGH_DENSITY +extern struct gpio_dev gpioe; +extern struct gpio_dev* const GPIOE; +extern struct gpio_dev gpiof; +extern struct gpio_dev* const GPIOF; +extern struct gpio_dev gpiog; +extern struct gpio_dev* const GPIOG; +#endif + +/** GPIO port A register map base pointer */ +#define GPIOA_BASE ((struct gpio_reg_map*)0x40010800) +/** GPIO port B register map base pointer */ +#define GPIOB_BASE ((struct gpio_reg_map*)0x40010C00) +/** GPIO port C register map base pointer */ +#define GPIOC_BASE ((struct gpio_reg_map*)0x40011000) +/** GPIO port D register map base pointer */ +#define GPIOD_BASE ((struct gpio_reg_map*)0x40011400) +/** GPIO port E register map base pointer */ +#define GPIOE_BASE ((struct gpio_reg_map*)0x40011800) +/** GPIO port F register map base pointer */ +#define GPIOF_BASE ((struct gpio_reg_map*)0x40011C00) +/** GPIO port G register map base pointer */ +#define GPIOG_BASE ((struct gpio_reg_map*)0x40012000) + +/* + * GPIO register bit definitions + */ + +/* Control registers, low and high */ + +#define GPIO_CR_CNF (0x3 << 2) +#define GPIO_CR_CNF_INPUT_ANALOG (0x0 << 2) +#define GPIO_CR_CNF_INPUT_FLOATING (0x1 << 2) +#define GPIO_CR_CNF_INPUT_PU_PD (0x2 << 2) +#define GPIO_CR_CNF_OUTPUT_PP (0x0 << 2) +#define GPIO_CR_CNF_OUTPUT_OD (0x1 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_PP (0x2 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_OD (0x3 << 2) +#define GPIO_CR_MODE 0x3 +#define GPIO_CR_MODE_INPUT 0x0 +#define GPIO_CR_MODE_OUTPUT_10MHZ 0x1 +#define GPIO_CR_MODE_OUTPUT_2MHZ 0x2 +#define GPIO_CR_MODE_OUTPUT_50MHZ 0x3 + +/** + * @brief GPIO pin modes. + * + * These only allow for 50MHZ max output speeds; if you want slower, + * use direct register access. + */ +typedef enum gpio_pin_mode { + /** Output push-pull. */ + GPIO_OUTPUT_PP = GPIO_CR_CNF_OUTPUT_PP | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Output open-drain. */ + GPIO_OUTPUT_OD = GPIO_CR_CNF_OUTPUT_OD | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Alternate function output push-pull. */ + GPIO_AF_OUTPUT_PP = GPIO_CR_CNF_AF_OUTPUT_PP | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Alternate function output open drain. */ + GPIO_AF_OUTPUT_OD = GPIO_CR_CNF_AF_OUTPUT_OD | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Analog input. */ + GPIO_INPUT_ANALOG = GPIO_CR_CNF_INPUT_ANALOG | GPIO_CR_MODE_INPUT, + /** Input floating. */ + GPIO_INPUT_FLOATING = GPIO_CR_CNF_INPUT_FLOATING | GPIO_CR_MODE_INPUT, + /** Input pull-down. */ + GPIO_INPUT_PD = GPIO_CR_CNF_INPUT_PU_PD | GPIO_CR_MODE_INPUT, + /** Input pull-up. */ + GPIO_INPUT_PU, /* (treated a special case, for ODR twiddling) */ +} gpio_pin_mode; + +/* Hacks for F2: */ +#define GPIO_MODE_ANALOG GPIO_INPUT_ANALOG +#define GPIO_MODE_OUTPUT GPIO_OUTPUT_PP + +/* + * AFIO register map + */ + +/** AFIO register map */ +typedef struct afio_reg_map { + __io uint32 EVCR; /**< Event control register. */ + __io uint32 MAPR; /**< AF remap and debug I/O configuration register. */ + __io uint32 EXTICR1; /**< External interrupt configuration register 1. */ + __io uint32 EXTICR2; /**< External interrupt configuration register 2. */ + __io uint32 EXTICR3; /**< External interrupt configuration register 3. */ + __io uint32 EXTICR4; /**< External interrupt configuration register 4. */ + __io uint32 MAPR2; /**< + * AF remap and debug I/O configuration register 2. */ +} afio_reg_map; + +/** AFIO register map base pointer. */ +#define AFIO_BASE ((struct afio_reg_map *)0x40010000) + +/* + * AFIO register bit definitions + */ + +/* Event control register */ + +#define AFIO_EVCR_EVOE (0x1 << 7) +#define AFIO_EVCR_PORT_PA (0x0 << 4) +#define AFIO_EVCR_PORT_PB (0x1 << 4) +#define AFIO_EVCR_PORT_PC (0x2 << 4) +#define AFIO_EVCR_PORT_PD (0x3 << 4) +#define AFIO_EVCR_PORT_PE (0x4 << 4) +#define AFIO_EVCR_PIN_0 0x0 +#define AFIO_EVCR_PIN_1 0x1 +#define AFIO_EVCR_PIN_2 0x2 +#define AFIO_EVCR_PIN_3 0x3 +#define AFIO_EVCR_PIN_4 0x4 +#define AFIO_EVCR_PIN_5 0x5 +#define AFIO_EVCR_PIN_6 0x6 +#define AFIO_EVCR_PIN_7 0x7 +#define AFIO_EVCR_PIN_8 0x8 +#define AFIO_EVCR_PIN_9 0x9 +#define AFIO_EVCR_PIN_10 0xA +#define AFIO_EVCR_PIN_11 0xB +#define AFIO_EVCR_PIN_12 0xC +#define AFIO_EVCR_PIN_13 0xD +#define AFIO_EVCR_PIN_14 0xE +#define AFIO_EVCR_PIN_15 0xF + +/* AF remap and debug I/O configuration register */ + +#define AFIO_MAPR_SWJ_CFG (0x7 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ (0x0 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST (0x1 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_SW (0x2 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW (0x4 << 24) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP (1U << 20) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP (1U << 19) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP (1U << 18) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP (1U << 17) +#define AFIO_MAPR_TIM5CH4_IREMAP (1U << 16) +#define AFIO_MAPR_PD01_REMAP (1U << 15) +#define AFIO_MAPR_CAN_REMAP (0x3 << 13) +#define AFIO_MAPR_CAN_REMAP_NONE (0x0 << 13) +#define AFIO_MAPR_CAN_REMAP_PB8_PB9 (0x2 << 13) +#define AFIO_MAPR_CAN_REMAP_PD0_PD1 (0x3 << 13) +#define AFIO_MAPR_TIM4_REMAP (1U << 12) +#define AFIO_MAPR_TIM3_REMAP (0x3 << 10) +#define AFIO_MAPR_TIM3_REMAP_NONE (0x0 << 10) +#define AFIO_MAPR_TIM3_REMAP_PARTIAL (0x2 << 10) +#define AFIO_MAPR_TIM3_REMAP_FULL (0x3 << 10) +#define AFIO_MAPR_TIM2_REMAP (0x3 << 8) +#define AFIO_MAPR_TIM2_REMAP_NONE (0x0 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3 (0x1 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11 (0x2 << 8) +#define AFIO_MAPR_TIM2_REMAP_FULL (0x3 << 8) +#define AFIO_MAPR_TIM1_REMAP (0x3 << 6) +#define AFIO_MAPR_TIM1_REMAP_NONE (0x0 << 6) +#define AFIO_MAPR_TIM1_REMAP_PARTIAL (0x1 << 6) +#define AFIO_MAPR_TIM1_REMAP_FULL (0x3 << 6) +#define AFIO_MAPR_USART3_REMAP (0x3 << 4) +#define AFIO_MAPR_USART3_REMAP_NONE (0x0 << 4) +#define AFIO_MAPR_USART3_REMAP_PARTIAL (0x1 << 4) +#define AFIO_MAPR_USART3_REMAP_FULL (0x3 << 4) +#define AFIO_MAPR_USART2_REMAP (1U << 3) +#define AFIO_MAPR_USART1_REMAP (1U << 2) +#define AFIO_MAPR_I2C1_REMAP (1U << 1) +#define AFIO_MAPR_SPI1_REMAP (1U << 0) + +/* External interrupt configuration register 1 */ + +#define AFIO_EXTICR1_EXTI3 (0xF << 12) +#define AFIO_EXTICR1_EXTI3_PA (0x0 << 12) +#define AFIO_EXTICR1_EXTI3_PB (0x1 << 12) +#define AFIO_EXTICR1_EXTI3_PC (0x2 << 12) +#define AFIO_EXTICR1_EXTI3_PD (0x3 << 12) +#define AFIO_EXTICR1_EXTI3_PE (0x4 << 12) +#define AFIO_EXTICR1_EXTI3_PF (0x5 << 12) +#define AFIO_EXTICR1_EXTI3_PG (0x6 << 12) +#define AFIO_EXTICR1_EXTI2 (0xF << 8) +#define AFIO_EXTICR1_EXTI2_PA (0x0 << 8) +#define AFIO_EXTICR1_EXTI2_PB (0x1 << 8) +#define AFIO_EXTICR1_EXTI2_PC (0x2 << 8) +#define AFIO_EXTICR1_EXTI2_PD (0x3 << 8) +#define AFIO_EXTICR1_EXTI2_PE (0x4 << 8) +#define AFIO_EXTICR1_EXTI2_PF (0x5 << 8) +#define AFIO_EXTICR1_EXTI2_PG (0x6 << 8) +#define AFIO_EXTICR1_EXTI1 (0xF << 4) +#define AFIO_EXTICR1_EXTI1_PA (0x0 << 4) +#define AFIO_EXTICR1_EXTI1_PB (0x1 << 4) +#define AFIO_EXTICR1_EXTI1_PC (0x2 << 4) +#define AFIO_EXTICR1_EXTI1_PD (0x3 << 4) +#define AFIO_EXTICR1_EXTI1_PE (0x4 << 4) +#define AFIO_EXTICR1_EXTI1_PF (0x5 << 4) +#define AFIO_EXTICR1_EXTI1_PG (0x6 << 4) +#define AFIO_EXTICR1_EXTI0 0xF +#define AFIO_EXTICR1_EXTI0_PA 0x0 +#define AFIO_EXTICR1_EXTI0_PB 0x1 +#define AFIO_EXTICR1_EXTI0_PC 0x2 +#define AFIO_EXTICR1_EXTI0_PD 0x3 +#define AFIO_EXTICR1_EXTI0_PE 0x4 +#define AFIO_EXTICR1_EXTI0_PF 0x5 +#define AFIO_EXTICR1_EXTI0_PG 0x6 + +/* External interrupt configuration register 2 */ + +#define AFIO_EXTICR2_EXTI7 (0xF << 12) +#define AFIO_EXTICR2_EXTI7_PA (0x0 << 12) +#define AFIO_EXTICR2_EXTI7_PB (0x1 << 12) +#define AFIO_EXTICR2_EXTI7_PC (0x2 << 12) +#define AFIO_EXTICR2_EXTI7_PD (0x3 << 12) +#define AFIO_EXTICR2_EXTI7_PE (0x4 << 12) +#define AFIO_EXTICR2_EXTI7_PF (0x5 << 12) +#define AFIO_EXTICR2_EXTI7_PG (0x6 << 12) +#define AFIO_EXTICR2_EXTI6 (0xF << 8) +#define AFIO_EXTICR2_EXTI6_PA (0x0 << 8) +#define AFIO_EXTICR2_EXTI6_PB (0x1 << 8) +#define AFIO_EXTICR2_EXTI6_PC (0x2 << 8) +#define AFIO_EXTICR2_EXTI6_PD (0x3 << 8) +#define AFIO_EXTICR2_EXTI6_PE (0x4 << 8) +#define AFIO_EXTICR2_EXTI6_PF (0x5 << 8) +#define AFIO_EXTICR2_EXTI6_PG (0x6 << 8) +#define AFIO_EXTICR2_EXTI5 (0xF << 4) +#define AFIO_EXTICR2_EXTI5_PA (0x0 << 4) +#define AFIO_EXTICR2_EXTI5_PB (0x1 << 4) +#define AFIO_EXTICR2_EXTI5_PC (0x2 << 4) +#define AFIO_EXTICR2_EXTI5_PD (0x3 << 4) +#define AFIO_EXTICR2_EXTI5_PE (0x4 << 4) +#define AFIO_EXTICR2_EXTI5_PF (0x5 << 4) +#define AFIO_EXTICR2_EXTI5_PG (0x6 << 4) +#define AFIO_EXTICR2_EXTI4 0xF +#define AFIO_EXTICR2_EXTI4_PA 0x0 +#define AFIO_EXTICR2_EXTI4_PB 0x1 +#define AFIO_EXTICR2_EXTI4_PC 0x2 +#define AFIO_EXTICR2_EXTI4_PD 0x3 +#define AFIO_EXTICR2_EXTI4_PE 0x4 +#define AFIO_EXTICR2_EXTI4_PF 0x5 +#define AFIO_EXTICR2_EXTI4_PG 0x6 + +/* AF remap and debug I/O configuration register 2 */ + +#define AFIO_MAPR2_FSMC_NADV (1U << 10) +#define AFIO_MAPR2_TIM14_REMAP (1U << 9) +#define AFIO_MAPR2_TIM13_REMAP (1U << 8) +#define AFIO_MAPR2_TIM11_REMAP (1U << 7) +#define AFIO_MAPR2_TIM10_REMAP (1U << 6) +#define AFIO_MAPR2_TIM9_REMAP (1U << 5) + +/* + * AFIO convenience routines + */ + +void afio_init(void); + +/* HACK: Use upper bit to denote MAPR2, Bit 31 is reserved and + * not used in either MAPR or MAPR2 */ +#define AFIO_REMAP_USE_MAPR2 (1U << 31) + +/** + * @brief Available peripheral remaps. + * @see afio_remap() + */ +typedef enum afio_remap_peripheral { + /** ADC 2 external trigger regular conversion remapping */ + AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP, + /** ADC 2 external trigger injected conversion remapping */ + AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP, + /** ADC 1 external trigger regular conversion remapping */ + AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP, + /** ADC 1 external trigger injected conversion remapping */ + AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP, + /** Timer 5 channel 4 internal remapping */ + AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP, + /** Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP, + /** CAN alternate function remapping 1 (RX on PB8, TX on PB9) */ + AFIO_REMAP_CAN_1 = AFIO_MAPR_CAN_REMAP_PB8_PB9, + /** CAN alternate function remapping 2 (RX on PD0, TX on PD1) */ + AFIO_REMAP_CAN_2 = AFIO_MAPR_CAN_REMAP_PD0_PD1, + /** Timer 4 remapping */ + AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP, + /** Timer 3 partial remapping */ + AFIO_REMAP_TIM3_PARTIAL = AFIO_MAPR_TIM3_REMAP_PARTIAL, + /** Timer 3 full remapping */ + AFIO_REMAP_TIM3_FULL = AFIO_MAPR_TIM3_REMAP_FULL, + /** + * Timer 2 partial remapping 1 (CH1 and ETR on PA15, CH2 on PB3, + * CH3 on PA2, CH4 on PA3) */ + AFIO_REMAP_TIM2_PARTIAL_1 = AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3, + /** + * Timer 2 partial remapping 2 (CH1 and ETR on PA0, CH2 on PA1, + * CH3 on PB10, CH4 on PB11) */ + AFIO_REMAP_TIM2_PARTIAL_2 = AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11, + /** Timer 2 full remapping */ + AFIO_REMAP_TIM2_FULL = AFIO_MAPR_TIM2_REMAP_FULL, + /** USART 2 remapping */ + AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP, + /** USART 1 remapping */ + AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP, + /** I2C 1 remapping */ + AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP, + /** SPI 1 remapping */ + AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP, + /** NADV signal not connected */ + AFIO_REMAP_FSMC_NADV = AFIO_MAPR2_FSMC_NADV | AFIO_REMAP_USE_MAPR2, + /** Timer 14 remapping */ + AFIO_REMAP_TIM14 = AFIO_MAPR2_TIM14_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 13 remapping */ + AFIO_REMAP_TIM13 = AFIO_MAPR2_TIM13_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 11 remapping */ + AFIO_REMAP_TIM11 = AFIO_MAPR2_TIM11_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 10 remapping */ + AFIO_REMAP_TIM10 = AFIO_MAPR2_TIM10_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 9 remapping */ + AFIO_REMAP_TIM9 = AFIO_MAPR2_TIM9_REMAP | AFIO_REMAP_USE_MAPR2, +} afio_remap_peripheral; + +void afio_remap(afio_remap_peripheral p); + +/** + * @brief Debug port configuration + * + * Used to configure the behavior of JTAG and Serial Wire (SW) debug + * ports and their associated GPIO pins. + * + * @see afio_cfg_debug_ports() + */ +typedef enum afio_debug_cfg { + /** Full Serial Wire and JTAG debug */ + AFIO_DEBUG_FULL_SWJ = AFIO_MAPR_SWJ_CFG_FULL_SWJ, + /** Full Serial Wire and JTAG, but no NJTRST. */ + AFIO_DEBUG_FULL_SWJ_NO_NJRST = AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST, + /** Serial Wire debug only (JTAG-DP disabled, SW-DP enabled) */ + AFIO_DEBUG_SW_ONLY = AFIO_MAPR_SWJ_CFG_NO_JTAG_SW, + /** No debug; all JTAG and SW pins are free for use as GPIOs. */ + AFIO_DEBUG_NONE = AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW, +} afio_debug_cfg; + +/** + * @brief Enable or disable the JTAG and SW debug ports. + * @param config Desired debug port configuration + * @see afio_debug_cfg + */ +static inline void afio_cfg_debug_ports(afio_debug_cfg config) { + __io uint32 *mapr = &AFIO_BASE->MAPR; + *mapr = (*mapr & ~AFIO_MAPR_SWJ_CFG) | config; +} + +/* + * Deprecated bits + */ + +/** + * @brief Deprecated. Use exti_cfg instead. + * + * In previous versions of libmaple, exti_attach_interrupt() took an + * afio_exti_port argument; afio_exti_port was also a member of struct + * gpio_dev. This isn't portable, so we now use exti_cfg + * instead. This typedef (and the macros AFIO_EXTI_PA, ..., + * AFIO_EXTI_PG) exist to preserve backwards compatibility. + */ +typedef exti_cfg afio_exti_port; + +/** Deprecated. Use EXTI_PA instead. */ +#define AFIO_EXTI_PA EXTI_PA +/** Deprecated. Use EXTI_PB instead. */ +#define AFIO_EXTI_PB EXTI_PB +/** Deprecated. Use EXTI_PC instead. */ +#define AFIO_EXTI_PC EXTI_PC +/** Deprecated. Use EXTI_PD instead. */ +#define AFIO_EXTI_PD EXTI_PD +/** Deprecated. Use EXTI_PE instead. */ +#define AFIO_EXTI_PE EXTI_PE +/** Deprecated. Use EXTI_PF instead. */ +#define AFIO_EXTI_PF EXTI_PF +/** Deprecated. Use EXTI_PG instead. */ +#define AFIO_EXTI_PG EXTI_PG + +/** + * @brief Deprecated. Use exti_num instead. + * + * In previous versions of libmaple, exti_attach_interrupt() took an + * afio_exti_num argument. This isn't portable, so we use exti_num + * instead. This typedef (and the macros AFIO_EXTI_0, ..., + * AFIO_EXTI_15) exist to preserve backwards compatibility. + */ +typedef exti_num afio_exti_num; + +/** Deprecated. Use EXTI0 instead. */ +#define AFIO_EXTI_0 EXTI0 +/** Deprecated. Use EXTI1 instead. */ +#define AFIO_EXTI_1 EXTI1 +/** Deprecated. Use EXTI2 instead. */ +#define AFIO_EXTI_2 EXTI2 +/** Deprecated. Use EXTI3 instead. */ +#define AFIO_EXTI_3 EXTI3 +/** Deprecated. Use EXTI4 instead. */ +#define AFIO_EXTI_4 EXTI4 +/** Deprecated. Use EXTI5 instead. */ +#define AFIO_EXTI_5 EXTI5 +/** Deprecated. Use EXTI6 instead. */ +#define AFIO_EXTI_6 EXTI6 +/** Deprecated. Use EXTI7 instead. */ +#define AFIO_EXTI_7 EXTI7 +/** Deprecated. Use EXTI8 instead. */ +#define AFIO_EXTI_8 EXTI8 +/** Deprecated. Use EXTI9 instead. */ +#define AFIO_EXTI_9 EXTI9 +/** Deprecated. Use EXTI10 instead. */ +#define AFIO_EXTI_10 EXTI10 +/** Deprecated. Use EXTI11 instead. */ +#define AFIO_EXTI_11 EXTI11 +/** Deprecated. Use EXTI12 instead. */ +#define AFIO_EXTI_12 EXTI12 +/** Deprecated. Use EXTI13 instead. */ +#define AFIO_EXTI_13 EXTI13 +/** Deprecated. Use EXTI14 instead. */ +#define AFIO_EXTI_14 EXTI14 +/** Deprecated. Use EXTI15 instead. */ +#define AFIO_EXTI_15 EXTI15 + +/** + * @brief Deprecated. Use exti_select(exti, port) instead. + */ +static __always_inline void afio_exti_select(exti_num exti, exti_cfg port) { + exti_select(exti, port); +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/i2c.h b/libmaple/stm32f1/include/series/i2c.h new file mode 100644 index 0000000..a0822e8 --- /dev/null +++ b/libmaple/stm32f1/include/series/i2c.h @@ -0,0 +1,85 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung (from <libmaple/i2c.h>). + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/include/stm32f1/include/series/i2c.h + * @brief STM32F1 I2C + */ + +#ifndef _LIBMAPLE_STM32F1_I2C_H_ +#define _LIBMAPLE_STM32F1_I2C_H_ + +#include <libmaple/i2c_common.h> +#include <libmaple/gpio.h> +#include <libmaple/stm32.h> + +/* + * Register maps + */ + +struct i2c_reg_map; + +/** STM32F1 I2C1 register map base pointer */ +#define I2C1_BASE ((struct i2c_reg_map*)0x40005400) +/** STM32F1 I2C2 register map base pointer */ +#define I2C2_BASE ((struct i2c_reg_map*)0x40005800) + +/* + * Devices + */ + +extern i2c_dev* const I2C1; +extern i2c_dev* const I2C2; + +/* + * For internal use + */ + +static inline uint32 _i2c_bus_clk(i2c_dev *dev) { + /* Both I2C peripherals are on APB1 */ + return STM32_PCLK1 / (1000 * 1000); +} + +#define _I2C_HAVE_IRQ_FIXUP 1 +void _i2c_irq_priority_fixup(i2c_dev *dev); + +/* + * Deprecated functionality + */ + +/* Flag to use alternate pin mapping in i2c_master_enable(). */ +#define _I2C_HAVE_DEPRECATED_I2C_REMAP 1 +#define I2C_REMAP 0x4 +static inline void _i2c_handle_remap(i2c_dev *dev, uint32 flags) { + if ((dev == I2C1) && (flags & I2C_REMAP)) { + afio_remap(AFIO_REMAP_I2C1); + I2C1->sda_pin = 9; + I2C1->scl_pin = 8; + } +} + +#endif /* _LIBMAPLE_STM32F1_I2C_H_ */ diff --git a/libmaple/stm32f1/include/series/nvic.h b/libmaple/stm32f1/include/series/nvic.h new file mode 100644 index 0000000..cdac737 --- /dev/null +++ b/libmaple/stm32f1/include/series/nvic.h @@ -0,0 +1,173 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/nvic.h + * @brief STM32F1 Nested Vectored Interrupt Controller (NVIC) support. + */ + +#ifndef _LIBMAPLE_STM32F1_NVIC_H_ +#define _LIBMAPLE_STM32F1_NVIC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> +#include <libmaple/stm32.h> + +/** + * @brief STM32F1 interrupt vector table interrupt numbers. + * @see <libmaple/scb.h> + */ +typedef enum nvic_irq_num { + NVIC_NMI = -14, /**< Non-maskable interrupt */ + NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ + NVIC_MEM_MANAGE = -12, /**< Memory management */ + NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory + access fault. */ + NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or + illegal state. */ + NVIC_SVC = -5, /**< System service call via SWI insruction */ + NVIC_DEBUG_MON = -4, /**< Debug monitor */ + NVIC_PEND_SVC = -2, /**< Pendable request for system service */ + NVIC_SYSTICK = -1, /**< System tick timer */ + NVIC_WWDG = 0, /**< Window watchdog interrupt */ + NVIC_PVD = 1, /**< PVD through EXTI line detection */ + NVIC_TAMPER = 2, /**< Tamper */ + NVIC_RTC = 3, /**< Real-time clock */ + NVIC_FLASH = 4, /**< Flash */ + NVIC_RCC = 5, /**< Reset and clock control */ + NVIC_EXTI0 = 6, /**< EXTI line 0 */ + NVIC_EXTI1 = 7, /**< EXTI line 1 */ + NVIC_EXTI2 = 8, /**< EXTI line 2 */ + NVIC_EXTI3 = 9, /**< EXTI line 3 */ + NVIC_EXTI4 = 10, /**< EXTI line 4 */ + NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ + NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ + NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ + NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ + NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ + NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ + NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ + NVIC_ADC_1_2 = 18, /**< ADC1 and ADC2 */ + NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ + NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ + NVIC_CAN_RX1 = 21, /**< CAN RX1 */ + NVIC_CAN_SCE = 22, /**< CAN SCE */ + NVIC_EXTI_9_5 = 23, /**< EXTI line [9:5] */ + NVIC_TIMER1_BRK_TIMER9 = 24, /**< Timer 1 break, Timer 9. */ + NVIC_TIMER1_UP_TIMER10 = 25, /**< Timer 1 update, Timer 10. */ + NVIC_TIMER1_TRG_COM_TIMER11 = 26, /**< + * Timer 1 trigger and commutation, + * Timer 11. */ + NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ + NVIC_TIMER2 = 28, /**< Timer 2 */ + NVIC_TIMER3 = 29, /**< Timer 3 */ + NVIC_TIMER4 = 30, /**< Timer 4 */ + NVIC_I2C1_EV = 31, /**< I2C1 event */ + NVIC_I2C1_ER = 32, /**< I2C1 error */ + NVIC_I2C2_EV = 33, /**< I2C2 event */ + NVIC_I2C2_ER = 34, /**< I2C2 error */ + NVIC_SPI1 = 35, /**< SPI1 */ + NVIC_SPI2 = 36, /**< SPI2 */ + NVIC_USART1 = 37, /**< USART1 */ + NVIC_USART2 = 38, /**< USART2 */ + NVIC_USART3 = 39, /**< USART3 */ + NVIC_EXTI_15_10 = 40, /**< EXTI line [15:10] */ + NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ + NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through + EXTI line */ + NVIC_TIMER8_BRK_TIMER12 = 43, /**< Timer 8 break, timer 12 */ + NVIC_TIMER8_UP_TIMER13 = 44, /**< Timer 8 update, timer 13 */ + NVIC_TIMER8_TRG_COM_TIMER14 = 45, /**< + * Timer 8 trigger and commutation, + * Timer 14. */ + NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ + NVIC_ADC3 = 47, /**< ADC3 */ + NVIC_FSMC = 48, /**< FSMC */ + NVIC_SDIO = 49, /**< SDIO */ + NVIC_TIMER5 = 50, /**< Timer 5 */ + NVIC_SPI3 = 51, /**< SPI3 */ + NVIC_UART4 = 52, /**< UART4 */ + NVIC_UART5 = 53, /**< UART5 */ + NVIC_TIMER6 = 54, /**< Timer 6 */ + NVIC_TIMER7 = 55, /**< Timer 7 */ + NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ + NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ + NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ + NVIC_DMA2_CH_4_5 = 59, /**< DMA2 channels 4 and 5 */ + + /* Old enumerators kept around for backwards compatibility: */ + NVIC_TIMER1_BRK = + NVIC_TIMER1_BRK_TIMER9, /**< @brief (Deprecated) Timer 1 break + * + * For backwards compatibility only. + * Use NVIC_TIMER1_BRK_TIMER9 instead. */ + NVIC_TIMER1_UP = + NVIC_TIMER1_UP_TIMER10, /**< @brief (Deprecated) Timer 1 update. + * + * For backwards compatibility only. + * Use NVIC_TIMER1_UP_TIMER10 instead. */ + NVIC_TIMER1_TRG_COM = + NVIC_TIMER1_TRG_COM_TIMER11, /**< @brief (deprecated) Timer 1 trigger + * and commutation. + * + * For backwards compatibility only. + * Use NVIC_TIMER1_TRG_COM_TIMER11 + * instead. */ + NVIC_TIMER8_BRK = + NVIC_TIMER8_BRK_TIMER12, /**< @brief (deprecated) Timer 8 break + * + * For backwards compatibility only. + * Use NVIC_TIMER8_BRK_TIMER12 instead. */ + NVIC_TIMER8_UP = + NVIC_TIMER8_UP_TIMER13, /**< @brief (deprecated) Timer 8 update + * For backwards compatibility only. + * Use NVIC_TIMER8_UP_TIMER13 instead. */ + NVIC_TIMER8_TRG_COM = + NVIC_TIMER8_TRG_COM_TIMER14, /**< @brief (deprecated) Timer 8 trigger + * and commutation. + * For backwards compatibility only. + * Use NVIC_TIMER8_TRG_COM_TIMER14 + * instead. */ +} nvic_irq_num; + +static inline void nvic_irq_disable_all(void) { + /* Even low-density devices have over 32 interrupt lines. */ + NVIC_BASE->ICER[0] = 0xFFFFFFFF; + NVIC_BASE->ICER[1] = 0xFFFFFFFF; +#if STM32_NR_INTERRUPTS > 64 + /* Only some have over 64; e.g. connectivity line MCUs. */ + NVIC_BASE->ICER[2] = 0xFFFFFFFF; +#endif +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/pwr.h b/libmaple/stm32f1/include/series/pwr.h new file mode 100644 index 0000000..e143a8c --- /dev/null +++ b/libmaple/stm32f1/include/series/pwr.h @@ -0,0 +1,52 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/pwr.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 Power control (PWR) support. + */ + +#ifndef _LIBMAPLE_STM32F1_PWR_H_ +#define _LIBMAPLE_STM32F1_PWR_H_ + +/* + * Register bit definitions + */ + +/* Control register */ + +/* PVD level selection */ +#define PWR_CR_PLS_2_2V (0x0 << 5) +#define PWR_CR_PLS_2_3V (0x1 << 5) +#define PWR_CR_PLS_2_4V (0x2 << 5) +#define PWR_CR_PLS_2_5V (0x3 << 5) +#define PWR_CR_PLS_2_6V (0x4 << 5) +#define PWR_CR_PLS_2_7V (0x5 << 5) +#define PWR_CR_PLS_2_8V (0x6 << 5) +#define PWR_CR_PLS_2_9V (0x7 << 5) + +#endif diff --git a/libmaple/stm32f1/include/series/rcc.h b/libmaple/stm32f1/include/series/rcc.h new file mode 100644 index 0000000..225ca49 --- /dev/null +++ b/libmaple/stm32f1/include/series/rcc.h @@ -0,0 +1,599 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/rcc.h + * @brief STM32F1 reset and clock control (RCC) support. + */ + +#ifndef _LIBMAPLE_STM32F1_RCC_H_ +#define _LIBMAPLE_STM32F1_RCC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * Register map + */ + +/** STM32F1 RCC register map type */ +typedef struct rcc_reg_map { + __io uint32 CR; /**< Clock control register */ + __io uint32 CFGR; /**< Clock configuration register */ + __io uint32 CIR; /**< Clock interrupt register */ + __io uint32 APB2RSTR; /**< APB2 peripheral reset register */ + __io uint32 APB1RSTR; /**< APB1 peripheral reset register */ + __io uint32 AHBENR; /**< AHB peripheral clock enable register */ + __io uint32 APB2ENR; /**< APB2 peripheral clock enable register */ + __io uint32 APB1ENR; /**< APB1 peripheral clock enable register */ + __io uint32 BDCR; /**< Backup domain control register */ + __io uint32 CSR; /**< Control/status register */ +} rcc_reg_map; + +#define RCC_BASE ((struct rcc_reg_map*)0x40021000) + +/* + * Register bit definitions + */ + +/* Clock control register */ + +#define RCC_CR_PLLRDY_BIT 25 +#define RCC_CR_PLLON_BIT 24 +#define RCC_CR_CSSON_BIT 19 +#define RCC_CR_HSEBYP_BIT 18 +#define RCC_CR_HSERDY_BIT 17 +#define RCC_CR_HSEON_BIT 16 +#define RCC_CR_HSIRDY_BIT 1 +#define RCC_CR_HSION_BIT 0 + +#define RCC_CR_PLLRDY (1U << RCC_CR_PLLRDY_BIT) +#define RCC_CR_PLLON (1U << RCC_CR_PLLON_BIT) +#define RCC_CR_CSSON (1U << RCC_CR_CSSON_BIT) +#define RCC_CR_HSEBYP (1U << RCC_CR_HSEBYP_BIT) +#define RCC_CR_HSERDY (1U << RCC_CR_HSERDY_BIT) +#define RCC_CR_HSEON (1U << RCC_CR_HSEON_BIT) +#define RCC_CR_HSICAL (0xFF << 8) +#define RCC_CR_HSITRIM (0x1F << 3) +#define RCC_CR_HSIRDY (1U << RCC_CR_HSIRDY_BIT) +#define RCC_CR_HSION (1U << RCC_CR_HSION_BIT) + +/* Clock configuration register */ + +#define RCC_CFGR_USBPRE_BIT 22 +#define RCC_CFGR_PLLXTPRE_BIT 17 +#define RCC_CFGR_PLLSRC_BIT 16 + +#define RCC_CFGR_MCO (0x3 << 24) +#define RCC_CFGR_USBPRE (1U << RCC_CFGR_USBPRE_BIT) +#define RCC_CFGR_PLLMUL (0xF << 18) +#define RCC_CFGR_PLLXTPRE (1U << RCC_CFGR_PLLXTPRE_BIT) +#define RCC_CFGR_PLLSRC (1U << RCC_CFGR_PLLSRC_BIT) +#define RCC_CFGR_ADCPRE (0x3 << 14) +#define RCC_CFGR_PPRE2 (0x7 << 11) +#define RCC_CFGR_PPRE1 (0x7 << 8) +#define RCC_CFGR_HPRE (0xF << 4) +#define RCC_CFGR_SWS (0x3 << 2) +#define RCC_CFGR_SWS_PLL (0x2 << 2) +#define RCC_CFGR_SWS_HSE (0x1 << 2) +#define RCC_CFGR_SW 0x3 +#define RCC_CFGR_SW_PLL 0x2 +#define RCC_CFGR_SW_HSE 0x1 + +/* Clock interrupt register */ + +#define RCC_CIR_CSSC_BIT 23 +#define RCC_CIR_PLLRDYC_BIT 20 +#define RCC_CIR_HSERDYC_BIT 19 +#define RCC_CIR_HSIRDYC_BIT 18 +#define RCC_CIR_LSERDYC_BIT 17 +#define RCC_CIR_LSIRDYC_BIT 16 +#define RCC_CIR_PLLRDYIE_BIT 12 +#define RCC_CIR_HSERDYIE_BIT 11 +#define RCC_CIR_HSIRDYIE_BIT 10 +#define RCC_CIR_LSERDYIE_BIT 9 +#define RCC_CIR_LSIRDYIE_BIT 8 +#define RCC_CIR_CSSF_BIT 7 +#define RCC_CIR_PLLRDYF_BIT 4 +#define RCC_CIR_HSERDYF_BIT 3 +#define RCC_CIR_HSIRDYF_BIT 2 +#define RCC_CIR_LSERDYF_BIT 1 +#define RCC_CIR_LSIRDYF_BIT 0 + +#define RCC_CIR_CSSC (1U << RCC_CIR_CSSC_BIT) +#define RCC_CIR_PLLRDYC (1U << RCC_CIR_PLLRDYC_BIT) +#define RCC_CIR_HSERDYC (1U << RCC_CIR_HSERDYC_BIT) +#define RCC_CIR_HSIRDYC (1U << RCC_CIR_HSIRDYC_BIT) +#define RCC_CIR_LSERDYC (1U << RCC_CIR_LSERDYC_BIT) +#define RCC_CIR_LSIRDYC (1U << RCC_CIR_LSIRDYC_BIT) +#define RCC_CIR_PLLRDYIE (1U << RCC_CIR_PLLRDYIE_BIT) +#define RCC_CIR_HSERDYIE (1U << RCC_CIR_HSERDYIE_BIT) +#define RCC_CIR_HSIRDYIE (1U << RCC_CIR_HSIRDYIE_BIT) +#define RCC_CIR_LSERDYIE (1U << RCC_CIR_LSERDYIE_BIT) +#define RCC_CIR_LSIRDYIE (1U << RCC_CIR_LSIRDYIE_BIT) +#define RCC_CIR_CSSF (1U << RCC_CIR_CSSF_BIT) +#define RCC_CIR_PLLRDYF (1U << RCC_CIR_PLLRDYF_BIT) +#define RCC_CIR_HSERDYF (1U << RCC_CIR_HSERDYF_BIT) +#define RCC_CIR_HSIRDYF (1U << RCC_CIR_HSIRDYF_BIT) +#define RCC_CIR_LSERDYF (1U << RCC_CIR_LSERDYF_BIT) +#define RCC_CIR_LSIRDYF (1U << RCC_CIR_LSIRDYF_BIT) + +/* APB2 peripheral reset register */ + +#define RCC_APB2RSTR_TIM11RST_BIT 21 +#define RCC_APB2RSTR_TIM10RST_BIT 20 +#define RCC_APB2RSTR_TIM9RST_BIT 19 +#define RCC_APB2RSTR_ADC3RST_BIT 15 +#define RCC_APB2RSTR_USART1RST_BIT 14 +#define RCC_APB2RSTR_TIM8RST_BIT 13 +#define RCC_APB2RSTR_SPI1RST_BIT 12 +#define RCC_APB2RSTR_TIM1RST_BIT 11 +#define RCC_APB2RSTR_ADC2RST_BIT 10 +#define RCC_APB2RSTR_ADC1RST_BIT 9 +#define RCC_APB2RSTR_IOPGRST_BIT 8 +#define RCC_APB2RSTR_IOPFRST_BIT 7 +#define RCC_APB2RSTR_IOPERST_BIT 6 +#define RCC_APB2RSTR_IOPDRST_BIT 5 +#define RCC_APB2RSTR_IOPCRST_BIT 4 +#define RCC_APB2RSTR_IOPBRST_BIT 3 +#define RCC_APB2RSTR_IOPARST_BIT 2 +#define RCC_APB2RSTR_AFIORST_BIT 0 + +#define RCC_APB2RSTR_TIM11RST (1U << RCC_APB2RSTR_TIM11RST_BIT) +#define RCC_APB2RSTR_TIM10RST (1U << RCC_APB2RSTR_TIM10RST_BIT) +#define RCC_APB2RSTR_TIM9RST (1U << RCC_APB2RSTR_TIM9RST_BIT) +#define RCC_APB2RSTR_ADC3RST (1U << RCC_APB2RSTR_ADC3RST_BIT) +#define RCC_APB2RSTR_USART1RST (1U << RCC_APB2RSTR_USART1RST_BIT) +#define RCC_APB2RSTR_TIM8RST (1U << RCC_APB2RSTR_TIM8RST_BIT) +#define RCC_APB2RSTR_SPI1RST (1U << RCC_APB2RSTR_SPI1RST_BIT) +#define RCC_APB2RSTR_TIM1RST (1U << RCC_APB2RSTR_TIM1RST_BIT) +#define RCC_APB2RSTR_ADC2RST (1U << RCC_APB2RSTR_ADC2RST_BIT) +#define RCC_APB2RSTR_ADC1RST (1U << RCC_APB2RSTR_ADC1RST_BIT) +#define RCC_APB2RSTR_IOPGRST (1U << RCC_APB2RSTR_IOPGRST_BIT) +#define RCC_APB2RSTR_IOPFRST (1U << RCC_APB2RSTR_IOPFRST_BIT) +#define RCC_APB2RSTR_IOPERST (1U << RCC_APB2RSTR_IOPERST_BIT) +#define RCC_APB2RSTR_IOPDRST (1U << RCC_APB2RSTR_IOPDRST_BIT) +#define RCC_APB2RSTR_IOPCRST (1U << RCC_APB2RSTR_IOPCRST_BIT) +#define RCC_APB2RSTR_IOPBRST (1U << RCC_APB2RSTR_IOPBRST_BIT) +#define RCC_APB2RSTR_IOPARST (1U << RCC_APB2RSTR_IOPARST_BIT) +#define RCC_APB2RSTR_AFIORST (1U << RCC_APB2RSTR_AFIORST_BIT) + +/* APB1 peripheral reset register */ + +#define RCC_APB1RSTR_DACRST_BIT 29 +#define RCC_APB1RSTR_PWRRST_BIT 28 +#define RCC_APB1RSTR_BKPRST_BIT 27 +#define RCC_APB1RSTR_CANRST_BIT 25 +#define RCC_APB1RSTR_USBRST_BIT 23 +#define RCC_APB1RSTR_I2C2RST_BIT 22 +#define RCC_APB1RSTR_I2C1RST_BIT 21 +#define RCC_APB1RSTR_UART5RST_BIT 20 +#define RCC_APB1RSTR_UART4RST_BIT 19 +#define RCC_APB1RSTR_USART3RST_BIT 18 +#define RCC_APB1RSTR_USART2RST_BIT 17 +#define RCC_APB1RSTR_SPI3RST_BIT 15 +#define RCC_APB1RSTR_SPI2RST_BIT 14 +#define RCC_APB1RSTR_WWDRST_BIT 11 +#define RCC_APB1RSTR_TIM14RST_BIT 8 +#define RCC_APB1RSTR_TIM13RST_BIT 7 +#define RCC_APB1RSTR_TIM12RST_BIT 6 +#define RCC_APB1RSTR_TIM7RST_BIT 5 +#define RCC_APB1RSTR_TIM6RST_BIT 4 +#define RCC_APB1RSTR_TIM5RST_BIT 3 +#define RCC_APB1RSTR_TIM4RST_BIT 2 +#define RCC_APB1RSTR_TIM3RST_BIT 1 +#define RCC_APB1RSTR_TIM2RST_BIT 0 + +#define RCC_APB1RSTR_DACRST (1U << RCC_APB1RSTR_DACRST_BIT) +#define RCC_APB1RSTR_PWRRST (1U << RCC_APB1RSTR_PWRRST_BIT) +#define RCC_APB1RSTR_BKPRST (1U << RCC_APB1RSTR_BKPRST_BIT) +#define RCC_APB1RSTR_CANRST (1U << RCC_APB1RSTR_CANRST_BIT) +#define RCC_APB1RSTR_USBRST (1U << RCC_APB1RSTR_USBRST_BIT) +#define RCC_APB1RSTR_I2C2RST (1U << RCC_APB1RSTR_I2C2RST_BIT) +#define RCC_APB1RSTR_I2C1RST (1U << RCC_APB1RSTR_I2C1RST_BIT) +#define RCC_APB1RSTR_UART5RST (1U << RCC_APB1RSTR_UART5RST_BIT) +#define RCC_APB1RSTR_UART4RST (1U << RCC_APB1RSTR_UART4RST_BIT) +#define RCC_APB1RSTR_USART3RST (1U << RCC_APB1RSTR_USART3RST_BIT) +#define RCC_APB1RSTR_USART2RST (1U << RCC_APB1RSTR_USART2RST_BIT) +#define RCC_APB1RSTR_SPI3RST (1U << RCC_APB1RSTR_SPI3RST_BIT) +#define RCC_APB1RSTR_SPI2RST (1U << RCC_APB1RSTR_SPI2RST_BIT) +#define RCC_APB1RSTR_WWDRST (1U << RCC_APB1RSTR_WWDRST_BIT) +#define RCC_APB1RSTR_TIM14RST (1U << RCC_APB1RSTR_TIM14RST_BIT) +#define RCC_APB1RSTR_TIM13RST (1U << RCC_APB1RSTR_TIM13RST_BIT) +#define RCC_APB1RSTR_TIM12RST (1U << RCC_APB1RSTR_TIM12RST_BIT) +#define RCC_APB1RSTR_TIM7RST (1U << RCC_APB1RSTR_TIM7RST_BIT) +#define RCC_APB1RSTR_TIM6RST (1U << RCC_APB1RSTR_TIM6RST_BIT) +#define RCC_APB1RSTR_TIM5RST (1U << RCC_APB1RSTR_TIM5RST_BIT) +#define RCC_APB1RSTR_TIM4RST (1U << RCC_APB1RSTR_TIM4RST_BIT) +#define RCC_APB1RSTR_TIM3RST (1U << RCC_APB1RSTR_TIM3RST_BIT) +#define RCC_APB1RSTR_TIM2RST (1U << RCC_APB1RSTR_TIM2RST_BIT) + +/* AHB peripheral clock enable register */ + +#define RCC_AHBENR_SDIOEN_BIT 10 +#define RCC_AHBENR_FSMCEN_BIT 8 +#define RCC_AHBENR_CRCEN_BIT 7 +#define RCC_AHBENR_FLITFEN_BIT 4 +#define RCC_AHBENR_SRAMEN_BIT 2 +#define RCC_AHBENR_DMA2EN_BIT 1 +#define RCC_AHBENR_DMA1EN_BIT 0 + +#define RCC_AHBENR_SDIOEN (1U << RCC_AHBENR_SDIOEN_BIT) +#define RCC_AHBENR_FSMCEN (1U << RCC_AHBENR_FSMCEN_BIT) +#define RCC_AHBENR_CRCEN (1U << RCC_AHBENR_CRCEN_BIT) +#define RCC_AHBENR_FLITFEN (1U << RCC_AHBENR_FLITFEN_BIT) +#define RCC_AHBENR_SRAMEN (1U << RCC_AHBENR_SRAMEN_BIT) +#define RCC_AHBENR_DMA2EN (1U << RCC_AHBENR_DMA2EN_BIT) +#define RCC_AHBENR_DMA1EN (1U << RCC_AHBENR_DMA1EN_BIT) + +/* APB2 peripheral clock enable register */ + +#define RCC_APB2ENR_TIM11EN_BIT 21 +#define RCC_APB2ENR_TIM10EN_BIT 20 +#define RCC_APB2ENR_TIM9EN_BIT 19 +#define RCC_APB2ENR_ADC3EN_BIT 15 +#define RCC_APB2ENR_USART1EN_BIT 14 +#define RCC_APB2ENR_TIM8EN_BIT 13 +#define RCC_APB2ENR_SPI1EN_BIT 12 +#define RCC_APB2ENR_TIM1EN_BIT 11 +#define RCC_APB2ENR_ADC2EN_BIT 10 +#define RCC_APB2ENR_ADC1EN_BIT 9 +#define RCC_APB2ENR_IOPGEN_BIT 8 +#define RCC_APB2ENR_IOPFEN_BIT 7 +#define RCC_APB2ENR_IOPEEN_BIT 6 +#define RCC_APB2ENR_IOPDEN_BIT 5 +#define RCC_APB2ENR_IOPCEN_BIT 4 +#define RCC_APB2ENR_IOPBEN_BIT 3 +#define RCC_APB2ENR_IOPAEN_BIT 2 +#define RCC_APB2ENR_AFIOEN_BIT 0 + +#define RCC_APB2ENR_TIM11EN (1U << RCC_APB2ENR_TIM11EN_BIT) +#define RCC_APB2ENR_TIM10EN (1U << RCC_APB2ENR_TIM10EN_BIT) +#define RCC_APB2ENR_TIM9EN (1U << RCC_APB2ENR_TIM9EN_BIT) +#define RCC_APB2ENR_ADC3EN (1U << RCC_APB2ENR_ADC3EN_BIT) +#define RCC_APB2ENR_USART1EN (1U << RCC_APB2ENR_USART1EN_BIT) +#define RCC_APB2ENR_TIM8EN (1U << RCC_APB2ENR_TIM8EN_BIT) +#define RCC_APB2ENR_SPI1EN (1U << RCC_APB2ENR_SPI1EN_BIT) +#define RCC_APB2ENR_TIM1EN (1U << RCC_APB2ENR_TIM1EN_BIT) +#define RCC_APB2ENR_ADC2EN (1U << RCC_APB2ENR_ADC2EN_BIT) +#define RCC_APB2ENR_ADC1EN (1U << RCC_APB2ENR_ADC1EN_BIT) +#define RCC_APB2ENR_IOPGEN (1U << RCC_APB2ENR_IOPGEN_BIT) +#define RCC_APB2ENR_IOPFEN (1U << RCC_APB2ENR_IOPFEN_BIT) +#define RCC_APB2ENR_IOPEEN (1U << RCC_APB2ENR_IOPEEN_BIT) +#define RCC_APB2ENR_IOPDEN (1U << RCC_APB2ENR_IOPDEN_BIT) +#define RCC_APB2ENR_IOPCEN (1U << RCC_APB2ENR_IOPCEN_BIT) +#define RCC_APB2ENR_IOPBEN (1U << RCC_APB2ENR_IOPBEN_BIT) +#define RCC_APB2ENR_IOPAEN (1U << RCC_APB2ENR_IOPAEN_BIT) +#define RCC_APB2ENR_AFIOEN (1U << RCC_APB2ENR_AFIOEN_BIT) + +/* APB1 peripheral clock enable register */ + +#define RCC_APB1ENR_DACEN_BIT 29 +#define RCC_APB1ENR_PWREN_BIT 28 +#define RCC_APB1ENR_BKPEN_BIT 27 +#define RCC_APB1ENR_CANEN_BIT 25 +#define RCC_APB1ENR_USBEN_BIT 23 +#define RCC_APB1ENR_I2C2EN_BIT 22 +#define RCC_APB1ENR_I2C1EN_BIT 21 +#define RCC_APB1ENR_UART5EN_BIT 20 +#define RCC_APB1ENR_UART4EN_BIT 19 +#define RCC_APB1ENR_USART3EN_BIT 18 +#define RCC_APB1ENR_USART2EN_BIT 17 +#define RCC_APB1ENR_SPI3EN_BIT 15 +#define RCC_APB1ENR_SPI2EN_BIT 14 +#define RCC_APB1ENR_WWDEN_BIT 11 +#define RCC_APB1ENR_TIM14EN_BIT 8 +#define RCC_APB1ENR_TIM13EN_BIT 7 +#define RCC_APB1ENR_TIM12EN_BIT 6 +#define RCC_APB1ENR_TIM7EN_BIT 5 +#define RCC_APB1ENR_TIM6EN_BIT 4 +#define RCC_APB1ENR_TIM5EN_BIT 3 +#define RCC_APB1ENR_TIM4EN_BIT 2 +#define RCC_APB1ENR_TIM3EN_BIT 1 +#define RCC_APB1ENR_TIM2EN_BIT 0 + +#define RCC_APB1ENR_DACEN (1U << RCC_APB1ENR_DACEN_BIT) +#define RCC_APB1ENR_PWREN (1U << RCC_APB1ENR_PWREN_BIT) +#define RCC_APB1ENR_BKPEN (1U << RCC_APB1ENR_BKPEN_BIT) +#define RCC_APB1ENR_CANEN (1U << RCC_APB1ENR_CANEN_BIT) +#define RCC_APB1ENR_USBEN (1U << RCC_APB1ENR_USBEN_BIT) +#define RCC_APB1ENR_I2C2EN (1U << RCC_APB1ENR_I2C2EN_BIT) +#define RCC_APB1ENR_I2C1EN (1U << RCC_APB1ENR_I2C1EN_BIT) +#define RCC_APB1ENR_UART5EN (1U << RCC_APB1ENR_UART5EN_BIT) +#define RCC_APB1ENR_UART4EN (1U << RCC_APB1ENR_UART4EN_BIT) +#define RCC_APB1ENR_USART3EN (1U << RCC_APB1ENR_USART3EN_BIT) +#define RCC_APB1ENR_USART2EN (1U << RCC_APB1ENR_USART2EN_BIT) +#define RCC_APB1ENR_SPI3EN (1U << RCC_APB1ENR_SPI3EN_BIT) +#define RCC_APB1ENR_SPI2EN (1U << RCC_APB1ENR_SPI2EN_BIT) +#define RCC_APB1ENR_WWDEN (1U << RCC_APB1ENR_WWDEN_BIT) +#define RCC_APB1ENR_TIM14EN (1U << RCC_APB1ENR_TIM14EN_BIT) +#define RCC_APB1ENR_TIM13EN (1U << RCC_APB1ENR_TIM13EN_BIT) +#define RCC_APB1ENR_TIM12EN (1U << RCC_APB1ENR_TIM12EN_BIT) +#define RCC_APB1ENR_TIM7EN (1U << RCC_APB1ENR_TIM7EN_BIT) +#define RCC_APB1ENR_TIM6EN (1U << RCC_APB1ENR_TIM6EN_BIT) +#define RCC_APB1ENR_TIM5EN (1U << RCC_APB1ENR_TIM5EN_BIT) +#define RCC_APB1ENR_TIM4EN (1U << RCC_APB1ENR_TIM4EN_BIT) +#define RCC_APB1ENR_TIM3EN (1U << RCC_APB1ENR_TIM3EN_BIT) +#define RCC_APB1ENR_TIM2EN (1U << RCC_APB1ENR_TIM2EN_BIT) + +/* Backup domain control register */ + +#define RCC_BDCR_BDRST_BIT 16 +#define RCC_BDCR_RTCEN_BIT 15 +#define RCC_BDCR_LSEBYP_BIT 2 +#define RCC_BDCR_LSERDY_BIT 1 +#define RCC_BDCR_LSEON_BIT 0 + +#define RCC_BDCR_BDRST (1U << RCC_BDCR_BDRST_BIT) +#define RCC_BDCR_RTCEN (1U << RCC_BDCR_RTC_BIT) +#define RCC_BDCR_RTCSEL (0x3 << 8) +#define RCC_BDCR_RTCSEL_NONE (0x0 << 8) +#define RCC_BDCR_RTCSEL_LSE (0x1 << 8) +#define RCC_BDCR_RTCSEL_HSE (0x3 << 8) +#define RCC_BDCR_LSEBYP (1U << RCC_BDCR_LSEBYP_BIT) +#define RCC_BDCR_LSERDY (1U << RCC_BDCR_LSERDY_BIT) +#define RCC_BDCR_LSEON (1U << RCC_BDCR_LSEON_BIT) + +/* Control/status register */ + +#define RCC_CSR_LPWRRSTF_BIT 31 +#define RCC_CSR_WWDGRSTF_BIT 30 +#define RCC_CSR_IWDGRSTF_BIT 29 +#define RCC_CSR_SFTRSTF_BIT 28 +#define RCC_CSR_PORRSTF_BIT 27 +#define RCC_CSR_PINRSTF_BIT 26 +#define RCC_CSR_RMVF_BIT 24 +#define RCC_CSR_LSIRDY_BIT 1 +#define RCC_CSR_LSION_BIT 0 + +#define RCC_CSR_LPWRRSTF (1U << RCC_CSR_LPWRRSTF_BIT) +#define RCC_CSR_WWDGRSTF (1U << RCC_CSR_WWDGRSTF_BIT) +#define RCC_CSR_IWDGRSTF (1U << RCC_CSR_IWDGRSTF_BIT) +#define RCC_CSR_SFTRSTF (1U << RCC_CSR_SFTRSTF_BIT) +#define RCC_CSR_PORRSTF (1U << RCC_CSR_PORRSTF_BIT) +#define RCC_CSR_PINRSTF (1U << RCC_CSR_PINRSTF_BIT) +#define RCC_CSR_RMVF (1U << RCC_CSR_RMVF_BIT) +#define RCC_CSR_LSIRDY (1U << RCC_CSR_LSIRDY_BIT) +#define RCC_CSR_LSION (1U << RCC_CSR_LSION_BIT) + +/* + * libmaple-mandated enumeration types. + */ + +/** + * @brief STM32F1 rcc_clk_id. + */ +typedef enum rcc_clk_id { + RCC_ADC1, + RCC_ADC2, + RCC_ADC3, + RCC_AFIO, + RCC_BKP, + RCC_CRC, + RCC_DAC, + RCC_DMA1, + RCC_DMA2, + RCC_FLITF, + RCC_FSMC, + RCC_GPIOA, + RCC_GPIOB, + RCC_GPIOC, + RCC_GPIOD, + RCC_GPIOE, + RCC_GPIOF, + RCC_GPIOG, + RCC_I2C1, + RCC_I2C2, + RCC_PWR, + RCC_SDIO, + RCC_SPI1, + RCC_SPI2, + RCC_SPI3, + RCC_SRAM, + RCC_TIMER1, + RCC_TIMER2, + RCC_TIMER3, + RCC_TIMER4, + RCC_TIMER5, + RCC_TIMER6, + RCC_TIMER7, + RCC_TIMER8, + RCC_TIMER9, + RCC_TIMER10, + RCC_TIMER11, + RCC_TIMER12, + RCC_TIMER13, + RCC_TIMER14, + RCC_USART1, + RCC_USART2, + RCC_USART3, + RCC_UART4, + RCC_UART5, + RCC_USB, +} rcc_clk_id; + +/** + * @brief STM32F1 PLL clock sources. + * @see rcc_configure_pll() + */ +typedef enum rcc_pllsrc { + RCC_PLLSRC_HSE = (0x1 << 16), + RCC_PLLSRC_HSI_DIV_2 = (0x0 << 16) +} rcc_pllsrc; + +/** + * @brief STM32F1 clock domains. + * @see rcc_dev_clk() + */ +typedef enum rcc_clk_domain { + RCC_APB1, + RCC_APB2, + RCC_AHB +} rcc_clk_domain; + +/** + * @brief STM32F1 Prescaler identifiers + * @see rcc_set_prescaler() + */ +typedef enum rcc_prescaler { + RCC_PRESCALER_AHB, + RCC_PRESCALER_APB1, + RCC_PRESCALER_APB2, + RCC_PRESCALER_USB, + RCC_PRESCALER_ADC +} rcc_prescaler; + +/** + * @brief STM32F1 ADC prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_adc_divider { + RCC_ADCPRE_PCLK_DIV_2 = 0x0 << 14, + RCC_ADCPRE_PCLK_DIV_4 = 0x1 << 14, + RCC_ADCPRE_PCLK_DIV_6 = 0x2 << 14, + RCC_ADCPRE_PCLK_DIV_8 = 0x3 << 14, +} rcc_adc_divider; + +/** + * @brief STM32F1 APB1 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb1_divider { + RCC_APB1_HCLK_DIV_1 = 0x0 << 8, + RCC_APB1_HCLK_DIV_2 = 0x4 << 8, + RCC_APB1_HCLK_DIV_4 = 0x5 << 8, + RCC_APB1_HCLK_DIV_8 = 0x6 << 8, + RCC_APB1_HCLK_DIV_16 = 0x7 << 8, +} rcc_apb1_divider; + +/** + * @brief STM32F1 APB2 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb2_divider { + RCC_APB2_HCLK_DIV_1 = 0x0 << 11, + RCC_APB2_HCLK_DIV_2 = 0x4 << 11, + RCC_APB2_HCLK_DIV_4 = 0x5 << 11, + RCC_APB2_HCLK_DIV_8 = 0x6 << 11, + RCC_APB2_HCLK_DIV_16 = 0x7 << 11, +} rcc_apb2_divider; + +/** + * @brief STM32F1 AHB prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_ahb_divider { + RCC_AHB_SYSCLK_DIV_1 = 0x0 << 4, + RCC_AHB_SYSCLK_DIV_2 = 0x8 << 4, + RCC_AHB_SYSCLK_DIV_4 = 0x9 << 4, + RCC_AHB_SYSCLK_DIV_8 = 0xA << 4, + RCC_AHB_SYSCLK_DIV_16 = 0xB << 4, + RCC_AHB_SYSCLK_DIV_32 = 0xC << 4, + RCC_AHB_SYSCLK_DIV_64 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_128 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_256 = 0xE << 4, + RCC_AHB_SYSCLK_DIV_512 = 0xF << 4, +} rcc_ahb_divider; + +/** + * @brief STM32F1 clock sources. + */ +typedef enum rcc_clk { + RCC_CLK_PLL = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_PLLON_BIT), /**< Main PLL, clocked by + HSI or HSE. */ + RCC_CLK_HSE = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_HSEON_BIT), /**< High speed external. */ + RCC_CLK_HSI = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_HSION_BIT), /**< High speed internal. */ + RCC_CLK_LSE = (uint16)((offsetof(struct rcc_reg_map, BDCR) << 8) | + RCC_BDCR_LSEON_BIT), /**< Low-speed external + * (32.768 KHz). */ + RCC_CLK_LSI = (uint16)((offsetof(struct rcc_reg_map, CSR) << 8) | + RCC_CSR_LSION_BIT), /**< Low-speed internal + * (approximately 32 KHz). */ +} rcc_clk; + +/** + * @brief STM32F1 PLL multipliers. + */ +typedef enum rcc_pll_multiplier { + RCC_PLLMUL_2 = (0x0 << 18), + RCC_PLLMUL_3 = (0x1 << 18), + RCC_PLLMUL_4 = (0x2 << 18), + RCC_PLLMUL_5 = (0x3 << 18), + RCC_PLLMUL_6 = (0x4 << 18), + RCC_PLLMUL_7 = (0x5 << 18), + RCC_PLLMUL_8 = (0x6 << 18), + RCC_PLLMUL_9 = (0x7 << 18), + RCC_PLLMUL_10 = (0x8 << 18), + RCC_PLLMUL_11 = (0x9 << 18), + RCC_PLLMUL_12 = (0xA << 18), + RCC_PLLMUL_13 = (0xB << 18), + RCC_PLLMUL_14 = (0xC << 18), + RCC_PLLMUL_15 = (0xD << 18), + RCC_PLLMUL_16 = (0xE << 18), +} rcc_pll_multiplier; + +/* FIXME [0.0.13] Just have data point to an rcc_pll_multiplier! */ + +/** + * @brief STM32F1 PLL configuration values. + * Point to one of these with the "data" field in a struct rcc_pll_cfg. + * @see struct rcc_pll_cfg. + */ +typedef struct stm32f1_rcc_pll_data { + rcc_pll_multiplier pll_mul; /**< PLL multiplication factor. */ +} stm32f1_rcc_pll_data; + +/* + * Deprecated bits. + */ + +/** + * @brief Deprecated; STM32F1 only. + * + * Initialize the clock control system. Initializes the system + * clock source to use the PLL driven by an external oscillator. + * + * @param sysclk_src system clock source, must be PLL + * @param pll_src pll clock source, must be HSE + * @param pll_mul pll multiplier + */ +__deprecated +void rcc_clk_init(rcc_sysclk_src sysclk_src, + rcc_pllsrc pll_src, + rcc_pll_multiplier pll_mul); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/spi.h b/libmaple/stm32f1/include/series/spi.h new file mode 100644 index 0000000..d288a0c --- /dev/null +++ b/libmaple/stm32f1/include/series/spi.h @@ -0,0 +1,99 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011, 2012 LeafLabs, LLC. + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/spi.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 SPI/I2S series header. + */ + +#ifndef _LIBMAPLE_STM32F1_SPI_H_ +#define _LIBMAPLE_STM32F1_SPI_H_ + +#include <libmaple/libmaple_types.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Register map base pointers + */ + +struct spi_reg_map; + +#define SPI1_BASE ((struct spi_reg_map*)0x40013000) +#define SPI2_BASE ((struct spi_reg_map*)0x40003800) +#define SPI3_BASE ((struct spi_reg_map*)0x40003C00) + +/* + * Device pointers + */ + +struct spi_dev; + +extern struct spi_dev *SPI1; +extern struct spi_dev *SPI2; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern struct spi_dev *SPI3; +#endif + +/* + * Routines + */ + +/* spi_gpio_cfg(): Backwards compatibility shim to spi_config_gpios() */ +struct gpio_dev; +extern void spi_config_gpios(struct spi_dev*, uint8, + struct gpio_dev*, uint8, + struct gpio_dev*, uint8, uint8, uint8); +/** + * @brief Deprecated. Use spi_config_gpios() instead. + * @see spi_config_gpios() + */ +static __always_inline void spi_gpio_cfg(uint8 as_master, + struct gpio_dev *nss_dev, + uint8 nss_bit, + struct gpio_dev *comm_dev, + uint8 sck_bit, + uint8 miso_bit, + uint8 mosi_bit) { + /* We switched style globally to foo_config_gpios() and always + * taking a foo_dev* argument (that last bit is the important + * part) after this function was written. + * + * However, spi_config_gpios() just ignores the spi_dev* on F1, so + * we can still keep this around for older code. */ + spi_config_gpios(NULL, as_master, nss_dev, nss_bit, + comm_dev, sck_bit, miso_bit, mosi_bit); +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/stm32.h b/libmaple/stm32f1/include/series/stm32.h new file mode 100644 index 0000000..f6e96f8 --- /dev/null +++ b/libmaple/stm32f1/include/series/stm32.h @@ -0,0 +1,212 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010, 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/stm32.h + * @brief STM32F1 chip- and series-specific definitions. + */ + +#ifndef _LIBMAPLE_STM32F1_H_ +#define _LIBMAPLE_STM32F1_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_MCU_SERIES STM32_SERIES_F1 + +/* The STM32F1 series is subdivided into "lines". libmaple currently + * officially supports STM32F103 performance line MCUs (see the + * MCU-specific value section below). + * + * You can use these F1 line defines if porting libmaple to support + * MCUs on other lines. */ +/** STM32F1 value line (STM32F100 MCUs). */ +#define STM32_F1_LINE_VALUE 0 +/** STM32F1 access line (STM32F101 MCUs). */ +#define STM32_F1_LINE_ACCESS 1 +/** STM32F1 USB access line (STM32F102 MCUs). */ +#define STM32_F1_LINE_USB_ACCESS 2 +/** STM32F1 performance line (STM32F103 MCUs). */ +#define STM32_F1_LINE_PERFORMANCE 3 +/** STM32F1 connectivity line (STM32F105/F107 MCUs). */ +#define STM32_F1_LINE_CONNECTIVITY 5 + +/* + * MCU-specific values. + * + * You can use this section to override any of the below settings on a + * per-MCU basis. For example, if your MCU has different STM32_PCLK1 + * or STM32_PCLK2 values, you can set them here and the values for + * STM32F103 microcontrollers set below won't take effect. + */ + +#if defined(MCU_STM32F103RB) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20005000) +# define STM32_MEDIUM_DENSITY + +#elif defined(MCU_STM32F103ZE) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE +# define STM32_NR_GPIO_PORTS 7 +# define STM32_SRAM_END ((void*)0x20010000) +# define STM32_HIGH_DENSITY + +#elif defined(MCU_STM32F103CB) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE + /* This STM32_NR_GPIO_PORTS is not true, but only pins 0 and + * exist, and they're used for OSC (e.g. on LeafLabs' Maple Mini), + * so we'll live with this for now. */ +# define STM32_NR_GPIO_PORTS 3 +# define STM32_SRAM_END ((void*)0x20005000) +# define STM32_MEDIUM_DENSITY + +#elif defined(MCU_STM32F103RE) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20010000) +# define STM32_HIGH_DENSITY + +#elif defined(MCU_STM32F100RB) +# define STM32_F1_LINE STM32_F1_LINE_VALUE +# define STM32_NR_GPIO_PORTS 4 +# define STM32_TIMER_MASK 0x380DE /* Timers: 1-4, 6, 7, 15-17. */ +# define STM32_SRAM_END ((void*)0x20002000) +# define STM32_MEDIUM_DENSITY + +#else +#warning "Unsupported or unspecified STM32F1 MCU." +#endif + +/* + * Derived values. + */ + +#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE + /* All supported performance line MCUs have a USB peripheral */ +# define STM32_HAVE_USB 1 + +# ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 43 +# define STM32_TIMER_MASK 0x1E /* TIMER1--TIMER4 */ +# define STM32_HAVE_FSMC 0 +# define STM32_HAVE_DAC 0 +# elif defined(STM32_HIGH_DENSITY) +# define STM32_NR_INTERRUPTS 60 +# define STM32_TIMER_MASK 0x1FE /* TIMER1--TIMER8 */ +# define STM32_HAVE_FSMC 1 +# define STM32_HAVE_DAC 1 +# elif defined(STM32_XL_DENSITY) +# define STM32_NR_INTERRUPTS 60 +# define STM32_TIMER_MASK 0x7FFE /* TIMER1--TIMER14 */ +# define STM32_HAVE_FSMC 1 +# define STM32_HAVE_DAC 1 +# endif + +#elif STM32_F1_LINE == STM32_F1_LINE_VALUE + /* Value line MCUs don't have USB peripherals. */ +# define STM32_HAVE_USB 0 + +# ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 56 +# define STM32_HAVE_FSMC 0 +# define STM32_HAVE_DAC 1 +# elif defined(STM32_HIGH_DENSITY) + /* 61 interrupts here counts the possibility for a remapped + * DMA2 channel 5 IRQ occurring at NVIC index 60. */ +# define STM32_NR_INTERRUPTS 61 +# define STM32_HAVE_FSMC 1 +# define STM32_HAVE_DAC 1 +# endif + +#endif + +/* + * Clock configuration. + * + * You can patch these for your line, MCU, clock configuration, + * etc. here or by setting cflags when compiling libmaple. + */ + +#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE +# ifndef STM32_PCLK1 +# define STM32_PCLK1 36000000U +# endif +# ifndef STM32_PCLK2 +# define STM32_PCLK2 72000000U +# endif +# ifndef STM32_DELAY_US_MULT +# define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */ +# endif +#elif STM32_F1_LINE == STM32_F1_LINE_VALUE /* TODO */ +# ifndef STM32_PCLK1 +# define STM32_PCLK1 12000000U +# endif +# ifndef STM32_PCLK2 +# define STM32_PCLK2 24000000U +# endif +# ifndef STM32_DELAY_US_MULT +# define STM32_DELAY_US_MULT 8 /* FIXME: value is incorrect. */ +# endif +#elif STM32_F1_LINE == STM32_F1_LINE_ACCESS /* TODO */ +#elif STM32_F1_LINE == STM32_F1_LINE_USB_ACCESS /* TODO */ +#elif STM32_F1_LINE == STM32_F1_LINE_CONNECTIVITY /* TODO */ +#endif + +/* + * Sanity checks. + * + * Make sure we have the F1-specific defines we need. + * <libmaple/stm32.h> will check that we've defined everything it needs. + */ + +#if !defined(STM32_F1_LINE) +#error "Bad STM32F1 configuration. Check STM32F1 <series/stm32.h> header." +#endif + +/* + * Doxygen + */ + +#ifdef __DOXYGEN__ + +/** + * @brief STM32 line value for the STM32F1 MCU being targeted. + * + * At time of writing, allowed values are: STM32_F1_LINE_PERFORMANCE, + * STM32_F1_LINE_VALUE. This set of values may expand as libmaple adds + * support for more STM32F1 lines. + */ +#define STM32_F1_LINE + +#endif /* __DOXYGEN__ */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/timer.h b/libmaple/stm32f1/include/series/timer.h new file mode 100644 index 0000000..cfeb770 --- /dev/null +++ b/libmaple/stm32f1/include/series/timer.h @@ -0,0 +1,128 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/timer.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 timer support. + */ + +#ifndef _LIBMAPLE_STM32F1_TIMER_H_ +#define _LIBMAPLE_STM32F1_TIMER_H_ + +#include <libmaple/libmaple_types.h> + +/* + * Register maps and base pointers + */ + +/** STM32F1 general purpose timer register map type */ +typedef struct timer_gen_reg_map { + __io uint32 CR1; /**< Control register 1 */ + __io uint32 CR2; /**< Control register 2 */ + __io uint32 SMCR; /**< Slave mode control register */ + __io uint32 DIER; /**< DMA/Interrupt enable register */ + __io uint32 SR; /**< Status register */ + __io uint32 EGR; /**< Event generation register */ + __io uint32 CCMR1; /**< Capture/compare mode register 1 */ + __io uint32 CCMR2; /**< Capture/compare mode register 2 */ + __io uint32 CCER; /**< Capture/compare enable register */ + __io uint32 CNT; /**< Counter */ + __io uint32 PSC; /**< Prescaler */ + __io uint32 ARR; /**< Auto-reload register */ + const uint32 RESERVED1; /**< Reserved */ + __io uint32 CCR1; /**< Capture/compare register 1 */ + __io uint32 CCR2; /**< Capture/compare register 2 */ + __io uint32 CCR3; /**< Capture/compare register 3 */ + __io uint32 CCR4; /**< Capture/compare register 4 */ + const uint32 RESERVED2; /**< Reserved */ + __io uint32 DCR; /**< DMA control register */ + __io uint32 DMAR; /**< DMA address for full transfer */ +} timer_gen_reg_map; + +struct timer_adv_reg_map; +struct timer_bas_reg_map; + +/** Timer 1 register map base pointer */ +#define TIMER1_BASE ((struct timer_adv_reg_map*)0x40012C00) +/** Timer 2 register map base pointer */ +#define TIMER2_BASE ((struct timer_gen_reg_map*)0x40000000) +/** Timer 3 register map base pointer */ +#define TIMER3_BASE ((struct timer_gen_reg_map*)0x40000400) +/** Timer 4 register map base pointer */ +#define TIMER4_BASE ((struct timer_gen_reg_map*)0x40000800) +/** Timer 5 register map base pointer */ +#define TIMER5_BASE ((struct timer_gen_reg_map*)0x40000C00) +/** Timer 6 register map base pointer */ +#define TIMER6_BASE ((struct timer_bas_reg_map*)0x40001000) +/** Timer 7 register map base pointer */ +#define TIMER7_BASE ((struct timer_bas_reg_map*)0x40001400) +/** Timer 8 register map base pointer */ +#define TIMER8_BASE ((struct timer_adv_reg_map*)0x40013400) +/** Timer 9 register map base pointer */ +#define TIMER9_BASE ((struct timer_gen_reg_map*)0x40014C00) +/** Timer 10 register map base pointer */ +#define TIMER10_BASE ((struct timer_gen_reg_map*)0x40015000) +/** Timer 11 register map base pointer */ +#define TIMER11_BASE ((struct timer_gen_reg_map*)0x40015400) +/** Timer 12 register map base pointer */ +#define TIMER12_BASE ((struct timer_gen_reg_map*)0x40001800) +/** Timer 13 register map base pointer */ +#define TIMER13_BASE ((struct timer_gen_reg_map*)0x40001C00) +/** Timer 14 register map base pointer */ +#define TIMER14_BASE ((struct timer_gen_reg_map*)0x40002000) + +/* + * Device pointers + * + * We only declare device pointers to timers which actually exist on + * the target MCU. This helps when porting programs to STM32F1 (or + * within F1 to a lower density MCU), as attempts to use nonexistent + * timers cause build errors instead of undefined behavior. + */ + +struct timer_dev; + +extern struct timer_dev *TIMER1; +extern struct timer_dev *TIMER2; +extern struct timer_dev *TIMER3; +extern struct timer_dev *TIMER4; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern struct timer_dev *TIMER5; +extern struct timer_dev *TIMER6; +extern struct timer_dev *TIMER7; +extern struct timer_dev *TIMER8; +#endif +#ifdef STM32_XL_DENSITY +extern struct timer_dev *TIMER9; +extern struct timer_dev *TIMER10; +extern struct timer_dev *TIMER11; +extern struct timer_dev *TIMER12; +extern struct timer_dev *TIMER13; +extern struct timer_dev *TIMER14; +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/usart.h b/libmaple/stm32f1/include/series/usart.h new file mode 100644 index 0000000..d12a3e2 --- /dev/null +++ b/libmaple/stm32f1/include/series/usart.h @@ -0,0 +1,76 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/usart.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 USART support. + */ + +#ifndef _LIBMAPLE_STM32F1_USART_H_ +#define _LIBMAPLE_STM32F1_USART_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +/* + * Register map base pointers + */ + +struct usart_reg_map; + +/** USART1 register map base pointer */ +#define USART1_BASE ((struct usart_reg_map*)0x40013800) +/** USART2 register map base pointer */ +#define USART2_BASE ((struct usart_reg_map*)0x40004400) +/** USART3 register map base pointer */ +#define USART3_BASE ((struct usart_reg_map*)0x40004800) +#ifdef STM32_HIGH_DENSITY +/** UART4 register map base pointer */ +#define UART4_BASE ((struct usart_reg_map*)0x40004C00) +/** UART5 register map base pointer */ +#define UART5_BASE ((struct usart_reg_map*)0x40005000) +#endif + +/* + * Devices + */ + +struct usart_dev; +extern struct usart_dev *USART1; +extern struct usart_dev *USART2; +extern struct usart_dev *USART3; +#ifdef STM32_HIGH_DENSITY +extern struct usart_dev *UART4; +extern struct usart_dev *UART5; +#endif + +#ifdef __cplusplus +} +#endif + +#endif |