Move NVIC support for STM32F1 to libmaple/stm32f1.

Backwards-compatible. Only the headers need to change.

Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>

1 files changed, 11 insertions, 111 deletions

diff --git a/libmaple/include/libmaple/nvic.h b/libmaple/include/libmaple/nvic.h
index d631eeb..afcb769 100644
--- a/libmaple/include/libmaple/nvic.h
+++ b/libmaple/include/libmaple/nvic.h
@@ -26,7 +26,7 @@
 
 /**
  * @file nvic.h
- * @brief Nested vector interrupt controller support.
+ * @brief Nested vectored interrupt controller support.
  *
  * Basic usage:
  *
@@ -73,109 +73,20 @@ typedef struct nvic_reg_map {
 /** NVIC register map base pointer. */
 #define NVIC_BASE                       ((struct nvic_reg_map*)0xE000E100)
 
-/**
- * @brief Interrupt vector table interrupt numbers.
- *
- * Each positive-valued enumerator is the position of the
- * corresponding interrupt in the vector table.  Negative-valued
- * enumerators correspond to interrupts controlled by the system
- * handler block.
- *
- * @see scb.h
- */
-typedef enum nvic_irq_num {
-    NVIC_NMI            = -14,  /**< Non-maskable interrupt */
-    NVIC_HARDFAULT      = -13,  /**< Hard fault (all class of fault) */
-    NVIC_MEM_MANAGE     = -12,  /**< Memory management */
-    NVIC_BUS_FAULT      = -11,  /**< Bus fault: prefetch fault, memory
-                                     access fault. */
-    NVIC_USAGE_FAULT    = -10,  /**< Usage fault: Undefined instruction or
-                                     illegal state. */
-    NVIC_SVC            = -5,   /**< System service call via SWI insruction */
-    NVIC_DEBUG_MON      = -4,   /**< Debug monitor */
-    NVIC_PEND_SVC       = -2,   /**< Pendable request for system service */
-    NVIC_SYSTICK        = -1,   /**< System tick timer */
-    NVIC_WWDG           = 0,    /**< Window watchdog interrupt */
-    NVIC_PVD            = 1,    /**< PVD through EXTI line detection */
-    NVIC_TAMPER         = 2,    /**< Tamper */
-    NVIC_RTC            = 3,    /**< Real-time clock */
-    NVIC_FLASH          = 4,    /**< Flash */
-    NVIC_RCC            = 5,    /**< Reset and clock control */
-    NVIC_EXTI0          = 6,    /**< EXTI line 0 */
-    NVIC_EXTI1          = 7,    /**< EXTI line 1 */
-    NVIC_EXTI2          = 8,    /**< EXTI line 2 */
-    NVIC_EXTI3          = 9,    /**< EXTI line 3 */
-    NVIC_EXTI4          = 10,   /**< EXTI line 4 */
-    NVIC_DMA_CH1        = 11,   /**< DMA1 channel 1 */
-    NVIC_DMA_CH2        = 12,   /**< DMA1 channel 2 */
-    NVIC_DMA_CH3        = 13,   /**< DMA1 channel 3 */
-    NVIC_DMA_CH4        = 14,   /**< DMA1 channel 4 */
-    NVIC_DMA_CH5        = 15,   /**< DMA1 channel 5 */
-    NVIC_DMA_CH6        = 16,   /**< DMA1 channel 6 */
-    NVIC_DMA_CH7        = 17,   /**< DMA1 channel 7 */
-    NVIC_ADC_1_2        = 18,   /**< ADC1 and ADC2 */
-    NVIC_USB_HP_CAN_TX  = 19,   /**< USB high priority or CAN TX */
-    NVIC_USB_LP_CAN_RX0 = 20,   /**< USB low priority or CAN RX0 */
-    NVIC_CAN_RX1        = 21,   /**< CAN RX1 */
-    NVIC_CAN_SCE        = 22,   /**< CAN SCE */
-    NVIC_EXTI_9_5       = 23,   /**< EXTI line [9:5] */
-    NVIC_TIMER1_BRK     = 24,   /**< Timer 1 break */
-    NVIC_TIMER1_UP      = 25,   /**< Timer 1 update */
-    NVIC_TIMER1_TRG_COM = 26,   /**< Timer 1 trigger and commutation */
-    NVIC_TIMER1_CC      = 27,   /**< Timer 1 capture/compare */
-    NVIC_TIMER2         = 28,   /**< Timer 2 */
-    NVIC_TIMER3         = 29,   /**< Timer 3 */
-    NVIC_TIMER4         = 30,   /**< Timer 4 */
-    NVIC_I2C1_EV        = 31,   /**< I2C1 event */
-    NVIC_I2C1_ER        = 32,   /**< I2C1 error */
-    NVIC_I2C2_EV        = 33,   /**< I2C2 event */
-    NVIC_I2C2_ER        = 34,   /**< I2C2 error */
-    NVIC_SPI1           = 35,   /**< SPI1 */
-    NVIC_SPI2           = 36,   /**< SPI2 */
-    NVIC_USART1         = 37,   /**< USART1 */
-    NVIC_USART2         = 38,   /**< USART2 */
-    NVIC_USART3         = 39,   /**< USART3 */
-    NVIC_EXTI_15_10     = 40,   /**< EXTI line [15:10] */
-    NVIC_RTCALARM       = 41,   /**< RTC alarm through EXTI line */
-    NVIC_USBWAKEUP      = 42,   /**< USB wakeup from suspend through
-                                     EXTI line */
-    NVIC_TIMER8_BRK     = 43,   /**< Timer 8 break */
-    NVIC_TIMER8_UP      = 44,   /**< Timer 8 update */
-    NVIC_TIMER8_TRG_COM = 45,   /**< Timer 8 trigger and commutation */
-    NVIC_TIMER8_CC      = 46,   /**< Timer 8 capture/compare */
-#ifdef STM32_HIGH_DENSITY
-    NVIC_ADC3           = 47,   /**< ADC3 */
-    NVIC_FSMC           = 48,   /**< FSMC */
-    NVIC_SDIO           = 49,   /**< SDIO */
-    NVIC_TIMER5         = 50,   /**< Timer 5 */
-    NVIC_SPI3           = 51,   /**< SPI3 */
-    NVIC_UART4          = 52,   /**< UART4 */
-    NVIC_UART5          = 53,   /**< UART5 */
-    NVIC_TIMER6         = 54,   /**< Timer 6 */
-    NVIC_TIMER7         = 55,   /**< Timer 7 */
-    NVIC_DMA2_CH1       = 56,   /**< DMA2 channel 1 */
-    NVIC_DMA2_CH2       = 57,   /**< DMA2 channel 2 */
-    NVIC_DMA2_CH3       = 58,   /**< DMA2 channel 3 */
-    NVIC_DMA2_CH_4_5    = 59,   /**< DMA2 channels 4 and 5 */
-#endif
-} nvic_irq_num;
-
 /*
- * Initialises the interrupt controller and sets all interrupts to the
- * lowest priority.
+ * Note: The family header must define enum nvic_irq_num, which gives
+ * descriptive names to the interrupts and exceptions from NMI (-14)
+ * to the largest interrupt available in the family, where the value
+ * for nonnegative enumerators corresponds to its position in the
+ * vector table.
  *
- * For stand-alone products, the base address is normally the start of
- * flash (0x08000000).
- *
- * @param vector_table_address  base address of the vector table
+ * It also must define a static inline nvic_irq_disable_all(), which
+ * writes 0xFFFFFFFF to all ICE registers available in the family.
  */
-void nvic_init(uint32 vector_table_address, uint32 offset);
+#include <family/nvic.h>
 
-/**
- * Sets the base address of the vector table.
- */
+void nvic_init(uint32 address, uint32 offset);
 void nvic_set_vector_table(uint32 address, uint32 offset);
-
 void nvic_irq_set_priority(nvic_irq_num irqn, uint8 priority);
 void nvic_sys_reset();
 
@@ -221,18 +132,7 @@ static inline void nvic_irq_disable(nvic_irq_num irq_num) {
  * Calling this function is significantly faster than calling
  * nvic_irq_disable() in a loop.
  */
-static inline void nvic_irq_disable_all(void) {
-    /* Note: This only works up to XL density.  The fix for
-     * connectivity line is:
-     *
-     *     NVIC_BASE->ICER[2] = 0xF;
-     *
-     * We don't support connectivity line devices (yet), so leave it
-     * alone for now.
-     */
-    NVIC_BASE->ICER[0] = 0xFFFFFFFF;
-    NVIC_BASE->ICER[1] = 0xFFFFFFFF;
-}
+static inline void nvic_irq_disable_all(void);
 
 #ifdef __cplusplus
 }