FSMC working but slow (~6 MHz).

1 files changed, 95 insertions, 105 deletions

diff --git a/examples/test-fsmc.cpp b/examples/test-fsmc.cpp
index f4fd068..ff55330 100644
--- a/examples/test-fsmc.cpp
+++ b/examples/test-fsmc.cpp
@@ -1,119 +1,109 @@
+#include <stdio.h>

+#include <stddef.h>

 

 #include "wirish.h"

 #include "fsmc.h"

 

-#define LED_PIN  23 // hack for maple native

-#define DISC_PIN 14 // hack for USB on native

-

-// System control block registers

-#define SCB_BASE    (SCB_Reg*)(0xE000ED00)

-

-// This stuff should ultimately get moved to util.h or scb.h or w/e. 

-// Also in interactive test program and the HardFault IRQ handler.

-typedef struct {

-    volatile uint32 CPUID;

-    volatile uint32 ICSR;

-    volatile uint32 VTOR;

-    volatile uint32 AIRCR;

-    volatile uint32 SCR;

-    volatile uint32 CCR;

-    volatile uint32 SHPR1;

-    volatile uint32 SHPR2;

-    volatile uint32 SHPR3;

-    volatile uint32 SHCRS;

-    volatile uint32 CFSR;

-    volatile uint32 HFSR;

-    uint32 pad1;   

-    volatile uint32 MMAR;

-    volatile uint32 BFAR;

-} SCB_Reg;

-

-SCB_Reg *scb; 

-

-uint16 *ptr;

-int toggle = 0;

-int count = 0;

+#define LED       BOARD_LED_PIN

+

+// Start of FSMC SRAM bank 1

+static uint16 *const ptr_start = (uint16*)0x60000000;

+// End of Maple Native SRAM chip address space (512K 16-bit words)

+static uint16 *const ptr_end = (uint16*)0x60080000;

+// For snprintf

+static char buf[100];

 

 void setup() {

-   uint32 id;

-   scb = (SCB_Reg*)SCB_BASE;

-

-   pinMode(LED_PIN, OUTPUT);

-   pinMode(DISC_PIN, OUTPUT);

-   digitalWrite(DISC_PIN,1);

-   digitalWrite(LED_PIN,1);

-

-   Serial1.begin(9600);

-   Serial1.println("Hello World!");

-

-   Serial1.print("Init... ");

-   fsmc_native_sram_init();

-   Serial1.println("Done.");

-

-   // Start of channel1 SRAM bank (through to 0x63FFFFFF, though only a chunk

-   // of this is valid)

-   ptr = (uint16*)(0x60000000);

-

-   Serial1.print("Writing... ");

-   *ptr = 0x1234;

-   Serial1.println("Done.");

-

-   Serial1.print("Reading... ");

-   id = *ptr;

-   Serial1.print("Done: ");     // shouldn't be 0xFFFFFFFF

-   Serial1.println(id,BIN);

-

-   Serial1.println("Dumping System Control Block Registers");

-   Serial1.print("CPUID: ");

-   id = scb->CPUID;

-   Serial1.println(id,BIN);

-   Serial1.print("ICSR:  ");

-   id = scb->ICSR;

-   Serial1.println(id,BIN);

-   Serial1.print("CFSR:  ");

-   id = scb->CFSR;

-   Serial1.println(id,BIN);

-   Serial1.print("HFSR:  ");

-   id = scb->HFSR;

-   Serial1.println(id,BIN);

-   Serial1.print("MMAR:  ");

-   id = scb->MMAR;

-   Serial1.println(id,BIN);

-   Serial1.print("BFAR:  ");

-   id = scb->BFAR;

-   Serial1.println(id,BIN);

-    

-   Serial1.println("Now testing all memory addresses... (will hardfault at the end)");

-   delay(3000);

+    pinMode(LED, OUTPUT);

+    digitalWrite(LED, HIGH);

+

+    Serial1.begin(115200);

+    Serial1.println("Hello World!");

+

+    Serial1.print("Initializing RAM chip... ");

+    fsmc_native_sram_init();

+    Serial1.println("Done.");

 }

 

-void loop() {

-   digitalWrite(LED_PIN, toggle);

-   toggle ^= 1;

-   delay(1);

-

-   for(int i = 0; i<100; i++) {   // modify this to speed things up

-        count++;

-        ptr++;

-        //delay(10);    // tweak this to test SRAM resiliance over time

-        *ptr = (0x0000FFFF & count);

-        if(*ptr != (0x0000FFFF & count)) {

-                Serial1.println("ERROR: mismatch, halting");

-                while(1) { }

+void test_single_write() {

+    uint16 *ptr = ptr_start;

+    uint16 tmp;

+

+    Serial1.print("Writing 0x1234... ");

+    *ptr = 0x1234;

+    Serial1.println("Done.");

+

+    Serial1.print("Reading... ");

+    tmp = *ptr;

+    Serial1.print("Done: 0x");

+    Serial1.println(tmp, HEX);

+

+    if (tmp != 0x1234) {

+        Serial1.println("Mismatch, abort.");

+        ASSERT(0);

+    }

+}

+

+void test_all_addresses() {

+    uint32 start, end;

+    uint16 count = 0;

+    uint16 *ptr;

+    Serial1.println("Now writing all memory addresses (unrolled loop)");

+    start = micros();

+    for (ptr = ptr_start; ptr < ptr_end;) {

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+        *ptr++ = count++;

+    }

+    end = micros();

+    Serial1.print("Done. Elapsed time (us): ");

+    Serial1.println(end - start);

+

+    Serial1.println("Validating writes.");

+    for (ptr = ptr_start, count = 0; ptr < ptr_end; ptr++, count++) {

+        if (*ptr != count) {

+            snprintf(buf, sizeof buf, "mismatch: %p = 0x%xu, should be 0x%xu.",

+                     ptr, *ptr, count);

+            Serial1.println(buf);

+            ASSERT(0);

         }

-   }

-   

-   Serial1.print((uint32)(ptr),HEX);

-   Serial1.print(": ");

-   Serial1.println(*ptr,BIN);

+    }

+    ptrdiff_t nwrites = ptr_end - ptr_start;

+    double us_per_write = double(end-start) / double(nwrites);

+    Serial1.println("Done; all writes seem valid.");

+    snprintf(buf, sizeof buf,

+             "Number of writes = %d; avg. time per write = %g us (%g MHz)",

+             nwrites, us_per_write, 1 / us_per_write);

+    Serial1.println(buf);

+}

+

+__attribute__((constructor)) void premain() {

+    init();

 }

 

 int main(void) {

-   init();

-   setup();

+    setup();

+

+    test_single_write();

+    test_all_addresses();

+

+    Serial1.println("Tests pass, finished.");

+

+    while (true)

+        ;

 

-   while (1) {

-      loop();

-   }

-   return 0;

+    return 0;

 }